I can no longer render in FCP 6 after upgrading to an AMD Radeon HD 7970 3072 MB

Hey,
I purchased a AMD Radeon HD 7970 3072 MB that was modified to work on a Mac from MacVideoCards.com.
I'm editing with FCP 6 and I find that I'm unable to render files anymore.
I get the specific effect name followed by error.
Would this be related to the card and would you know how to fix this?
I've also notice when I start the computer up, it stays on the grey screen longer than it did when I had the original card (512 mb).
I had my 2.26 8 core converted to a 3.46 12 core.
I currently have 32 GB of ram 1333 MHz.
1tb Hard drive.
I'm also running OS X 10.9.5.
If you could be any assistance I'd appreciate it.
Thanks

I think you are sailing in uncharted waters with those kind of modifications.
I am only guessing, but if you have not already done so,  do a PRAM reset and then trash your FCP preferences.
Big Poppa Chris wrote:
I've also notice when I start the computer up, it stays on the grey screen longer than it did when I had the original card (512 mb).
My understanding is the Mac is doing a ram/hardware test during the grey screen, if the card you added had additional memory, then it is very likely the test will take longer - but I am no hardware expert.
MtD

Similar Messages

  • Apple TV can no longer connect to network after upgrade.

    I had heard that lots of people were affected with this problem with the software upgrade before this one so I deliberately waiting until this one came out before taking a chance. I was wrong.
    After updating to 4.4. (3140) I can no longer connect to my network. It says there was a problem and gave the error messaged number: (5) in brackets.
    I've had nothing but problems with both Apple TV's that I have owned, version 1 and this new version 2. I've a good signal from my router and I've used three different ones over the time I've had the two apple tvs.
    Anyone got any ideas.
    I can't connect the apple tv directly because they are too far apart in the house. I can only connect by wifi.
    There is nothing wrong with my wifi because I'm connected to it fine though my imac, iphone and ipad and laptop, (not all at the same time)

    Ok, here's a solution, courtesy of our friends at AppleCare.  
    Unplug the router for 90 seconds.
    I was running ATV2 with a Time Capsule.   The TC thought the ATV was still connected using its former IP address so wouldn't let it reconnect with a new one.
    Hope this works for anyone else with same problem.

  • My iPod Touch can no longer download Podcast Videos after upgrading to iOS4

    After upgrading OS 3.1.3 to iOS4, My iPod Touch (2nd Generation) can no longer download such video podcasts as NBC News, CBS News, ABC News and Cranky Geeks from iTunes store. The moment the download starts, there is always an annoying prompt "this video cannot be played on this iPod".
    It's really frustrating!!!

    Same thing happening to mine also, still cant find a reason.
    Message was edited by: glynn1019

  • Webex can no longer connect to meetings after upgrading to Yosemite.

    I recently upgraded to Yosemite 10.10.1 and found thereafter that Webex, which is a screen share application used for online meetings, can no longer connect to Webex services using the most current versions of Safari, FireFox and Chrome. Java scripts are enabled, pop ups allowed on all browser and yet the problem persists. Any thoughts on how to resolve this?

    There was nothing that I did to make it work--it just started working again in Safari. However, it takes a few minutes after I click on Login and then the meeting comes up in another window behind the one I logged in on. I just tried it in Firefox and it now works there; still does not work in Chrome. All three browsers still have the following message in a black banner at the top: "Your browser version is not supported for use with WebEx and may not provide an optimal experience.To view browsers that support the best WebEx experience, go here." One thing I did do that may have enabled it to work in Firefox was to remove Silverlight, which is a Windows app and I'm not even sure how it got on my computer. I was told that it has a similar plug-in as the WebEx plug-in. I'm still searching for answers.
    Robin

  • Video's are missing and can not post any video's and can no longer see on Facebook after upgrading mac software.  Facebook says content is unavailable.  Is this a facebook issue or is there something that I can do to fix on my mac.

    Video's are missing from facebook album under photo's.  It shows that I have 99 and only shows 24.  These are not copyright problems.  I have had them up for years.  Now, I can not post any video's  too.  Message says that content is currently unavailable. It seemed to happen after I upgraded to 10.7.5 but it could be coincidental.  Of course, I have not got any email from facebook to help with this problem and I am really frustrated that I can not find my video's and post any new ones anymore.  Any help would be appreciated.

    I would like to add that Comcast is my internet provider. Perhaps that is part of the issue although the Connection Doctor confirms the mail box is connecting to the internet. No other function processes when Connection Doctor program is used to find the source of the issue. I have read forum posts but am unable to find a way to get my Apple mail to be delivered to my computer. It worked fine up until I chose to transfer mail to the Cloud. My mail account is a .mac account.
    Still hoping someone out there can help me.
    thanks,
    anne

  • HT4623 my ipad can no longer acces itunes store after iso 7 was installed... can i go back to ixo6

    i can no longer access itunes store after iso 7 was installed... can i go back to iso 6

    No you can't.
    Reboot your iPad:  Press and hold BOTH the power and home buttons at the SAME for up to 30 seconds, until the Apple Logo appears, then let go of both buttons and your iPad will restart.  You won't lose any data settings.  When your iPad restarts see if you can access iTunes.

  • I can no longer open any PDF after my trial of Acrobat XI Pro finished...Help

    I can no longer open any PDF after my trial of Acrobat XI Pro finished...Help

    I would try using this tool to first remove all traces of Acrobat from your computer:
    http://labs.adobe.com/downloads/acrobatcleaner.html
    Then, you can download the full offline Reader installer from
    http://get.adobe.com/reader/enterprise/
    After downloading, restart your computer and run the installer before doing anything else.

  • , I-tunes can no longer 'locate' my library , after a botched cut & paste attempt to back-up onto an external drive. Still syncing with i-Pod but playlists lost , podcasts no longer syncing, Can't play music .. how to restore back to original state .

    I-tunes can no longer 'locate' my library , after a botched cut & paste attempt to back-up onto an external drive.Cant play any music as it "can't find" the library  Still syncing with i-Pod but playlists lost , podcasts no longer syncing.   How to restore back to original state . I have tried re-installing  - with no change

    I do the same thing as you do...
    My music is on an external drive as to not use up gigabytes of storage that need not be used for media.
    There are a couple basic principles to iTunes that I believe you should know.
    1. iTunes is not a media storage program. It does not store your media "in iTunes". It simply is an organization tool for your media already on a hard disk.
    2. As iTunes is not a storage mechanism, it has no way to "know" whether or not the media that is listed is actually there. This is where the "design" of iTunes comes into play.
    I like to think of iTunes as a bread-crumb trail. The "music" in iTunes, isn't actually there. The bread crumb is the location on the external hard drive.
    If that bread crumb trail disappears (in this case the external drive you use). If said external drive is not plugged in, that bread crumb trail is not able to be followed. iTunes is "lost" and unable to find the media. The only way to remedy this is to place the media on your local drive.
    To address your issue of the library. If you hold down shift, you can select your library on your external drive. It will be a file with an .itl extension. The folder name will be your external drive.
    I go into edit > preferences > advanced and set my library to the correct location. Make sure you check the box "Copy to iTunes Folder when importing" (or whatever it says).
    You can't fix the issue of iTunes not seeing the media if your drive is unplugged unless you physically move the content to your OS HDD...Or any other HDD you use.

  • Can't open my photo library after upgrading to iPhoto 11.  is it possible to load iPhoto 9.0.1 after loading 11?  have followed all other instructions but it still won't let me open iPhoto.

    can't open my photo library after upgrading to iphoto 11.  Is it possible to download iphoto 9.0.1 after installing '11.  Have followed all the other instructions and am in a loop which doesn't allow me to access iphoto or my photos.

    when iphoto wouldnt open we read the trouble shooting info and it said that we may have needed to download 9.0.1 if we had an older version.  We obviously didn't download it before the upgrade and wondered if it would cause problems or indeed solve the problem if we downloaded it now!
    When we try to open iphoto is says:
    To open your library with this version of iphoto it first needs to be prepared
    To prepare the library use the iphoto library upgrader available from Apple.
    We have downloaded this twice now and it still sends us this message when we try to open iphoto. 

  • HT1414 how can i activate my iphone 3gs after upgrading to ios6? it could not activate....

    how can i activate my iphone 3gs after upgrading to ios6? it could not activate....

    If your phone was previously hacked to unlock it, when you updated the hack was removed and it's re-locked to the original carrier.  The phone will now activate and operate only with that original carrier.

  • CS5 can't preview the fonts image after upgrade the OS X 10.10.1

    My CS5 can't preview the fonts image after upgrade the OS X 10.10.1,
    Wanna try to reinstall the AI but my disc read error. Anyone has this problem or solution, Many Thanks!!

    Thanks but can't find this "system transparency" setting inside the illustrator. Search the key word doesn't work...

  • Do i need to reinstall programs and applications like FCP after upgrading to the new Lion OS?

    Do i need to reinstall programs and applications like FCP after upgrading to the new Lion OS?

    I've installed Lion over Snow Leopard and all my non Apple software is still here - you may want to check if your software will work with Lion and I would definately recommend having a bootable backup in case anything goes wrong
    Regards,
    Colin R.

  • Cannon MP830 can't use the scanner function after upgrading to Mavericks.

    I have an Cannon MP830 and now I can't use the scanner function after upgrading to Mavericks.  Can someone help?

    There is no ICA driver for this model so you won't be able to use Image Capture or Preview. But there is a TWAIN scanner driver and the supporting MP Navigator application available for 10.8 from Canon, so you could try installing these and see if you can scan again.

  • Can't find my microsoft 2008 after upgrading to lion

    can't find my microsoft 2008 after upgrading to lion

    Hi Rayhiggs,
    Welcome to the Apple Support Communities!
    To set up and use Personal Hotspot please use the attached article for the process. If Personal Hotspot is not showing as an option in Settings > Cellular, it may be necessary to contact your carrier as described in the article. 
    iOS: Understanding Personal Hotspot - Apple Support
    Cheers,
    Joe

  • Can't open old Numbers spreadsheet after upgrading Mac to Yosemite. Error message says it should first be upgraded to Numbers 09 but doesn't provide method to do so?  Help?

    Can't open old Numbers spreadsheet after upgrading Mac to Yosemite. Error message says it should first be upgraded to Numbers 09 but doesn't provide method to do so?  Help?

    There is a chance the spreadsheets were made with a Numbers or AppleWorks version so old that it's not compatible anymore with the latest Numbers version (yes this can happen)

Maybe you are looking for

  • Connection to server on port 25 timed out

    Can't send mail. Connection to the server "smtp.ca.astound.net" on port 25 timed out. I keep getting this error when sending mail. I can receive mail but just can't send. I noticed this problem sometime after installing the Security Update 2006-005,

  • Planning Horizon Business Content

    Hi, Does anyone know if there is a business content for Planning Horizon for Stock - via transaction MD63/61 ?

  • InDesign Server Installation and Configuration Guide

    Hi everybody I try to ask one silly Q. Where can I get this document. I found many references but no link :(

  • Updating thumbnails can't find original

    Every time i launch iPhoto 11 (after i connect iPhone), and the updating thumbnail process initiates, iPhoto stalls saying it can't find about ~20 original photos.  It the same ~20 photos everytime.  Tried repairing database.  No change.

  • Listener won't start

    Hi, I installed oracle 10g express edition on Linux redhat 9 and I can't get going with it because the listener won't run. When I try /etc/init.d/oracle-xe start I get: Starting Oracle Net Listener. Starting Oracle Database 10g Express Edition Instan