I can no longer scan using HP d110 after Mavericks

I have tried so many work-arounds to fix this issue! I've read countless threads, deleted and re-installed drivers (although according to mac and hp, this wasn't necessary), I've tried scanning using the Print/Scan utility, Image Capture, Preview and Webscan and NOTHING works. The scan begins (so I know that the printer and communicating) but then I get an error message that says "An error occurred while communicating with the scanner."
My printer works fine. But scan - which worked just fine before installing Mavericks - no longer works. Help!

Hi urbanfitchick,
I understand that you are getting a scan error. I will do my best to help you resolve this issue in Mavericks. I suggest trying to do a copy from the printer, this is to establish that the scan function is working properly on the printer. If you cannot do a copy then there is a problem with the scanner hardware and we will have to address that issue first. If there is no problems doing the copy then I recommend that you power cycle the network.
How to power cycle network
Follow these steps to reset your HP printer, your wireless router, and your computer.
1.Press the Power button on the HP printer to turn it off.
2.Disconnect the power cord from the rear of the HP printer.
3.Disconnect the power cord from the wireless router.
4.Turn off the computer.
5.Wait 30 seconds.
6.Reconnect the power cord to the wireless router.
7.Wait 30 seconds, or until the router is fully on and ready.
8.Turn the computer back on.
9.Wait for the computer to reload.
10.Reconnect the power cord to the rear of the HP printer.
11.Turn the printer back on.
Then reset the Printing System
Resetting the Printing System in Mac
Open System Preferences > Printers & Scanners > Print
Hold down the Option key while clicking the "-" (Remove printer) button.
If no printers are currently added, hold down the Control key while clicking in the box that appears above the "+" (Add printer) button, then choose Reset printing system… from the contextual menu
Once you have the printer installed here is a document on How to Scan: OS X v10.9
LINK: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967500&tmp_task=useCatego ry&cc=us&dlc=en&lc=en&product=4023246
I am including this link for other options for scanning as well.
LINK: http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/HP-Officejet-7310-All-i n-One/m-p/3081523#M73430
I hope this helps, let me know.
Thank you,
Advance 23
I work on behalf of HP

Similar Messages

Can no longer scan using preview

I have Brother DCP-9040CN color laser Printer and I am using the latest version of Mountain Lion. I have been scanning documents with no problems. The last time I tried to scan a document, I get the message the selected folder in not writable. I have not changed any setting.Does anyone have any idea what could be the problem?

Try to option click on your printer (if there is no printer updates) and click reset. this is found in the system preferences.

Can no longer scan with the HP Envy 4500

I can no longer scan documents with the HP Envy 4500. When I try to scan it times out and I receive the following error message:
"Scanner communiocation cannot be established. Ensure your product is powered on, check the connection, and ensure your network is functioning properly. If these conditions are correct, restart the product and try scanning again." I use a wireles connection to the HP Envy 4500 and it is working fine as I can print documents with no issues. I ran the HP Print and Scan Doctor and it flagged the issue as a potential problem with the device driver. I uninstalled the HP software and downloaded the latest version from the HP site, installed it, and tha did not correct the problem. At this point, I am not sure what else to try and correct the problem. Any suggestion would be much appreciated.

Thanks for getting back to me
If the printer will not make copies, the unit may have a "Scanner Failure", unfortunately, and resetting the router, or computer troubleshooting would not make a difference.
You can try a power reset on the printer, to see if that will help:
Power reset the printer:
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
You can also try using a different wall outlet to see if this makes a difference.
If the problem continues, contact HP's Technical Support directly to discuss your printer replacement options, as you would require a new printer if there is a Scanner Failure.
Reach our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Good luck to you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Can no longer scan from my HP Photosmart C 4650 to my computer since upgrading to Maverick

I can no longer scan from my HP Photosmart C 4650 to my computer since I upgraded to Maverick. I have to use image capture to do so. Are there any fix's out there?

My C4680 works w/o any issues in the last four OSs. You might want to reinstall the 2.16.1 driver update.

HT1338 I have an HP Printer/scanner, and since upgrading to Mountain Lion I can no longer scan on my HP. HP tells me that I can get an upgrade app from 'Apple Software Upgrade' . Does anyone know how to do this?

I have an HP Printer/scanner, and since upgrading to Mountain Lion I can no longer scan on my HP. HP tells me that I can get an upgrade app from 'Apple Software Upgrade' . Does anyone know how to do this?

HP couldn't find its own apps with both hands and a flashlight.
As of Lion all scanning functions are incorporated natively in OS X. You can scan three ways:
Use Preview: File > Import from scanner
Use Image Capture
(Preview and Image Capture are both in your Applications folder.)
System Preferences > Print & Scan. Select your HP and use the Scan tab.
If you have HP's "Image Zone" software installed, you no longer need it and it no longer works anyway.

HP8500A all-in-one can no longer scan thru wireless network but prints fine.

HP8500A all-in-one can no longer scan thru wireless network but prints fine. Have used this device several times over past 2 years on different wireless networks (at home) but usually at some point I lose wireless scan function but maintain wireless Printing. I used to be able to reload the software and resolve the issue but now in this "new network" cannot get wireless scanning to work. Setup software; original software (CD) and current download as well as "Print/Scan Dr" hangs-up at "network check" for hours. Compaq laptop, Dell Laptop, Cell phones and Roku work fine thru network. Scanner works fine with USB to Laptops.

Which model Epsons are they?
I'm assuming you're using Yosemite (OS X 10.10), and that the problem developed when you upgraded from a previous OS.
(Your profile says 10.6.7 BTW).
Maybe the scanning function is not compatible with Yosemite.
You could try a few things:
reset your wifi system:
power down everything: modem, router, computer, printer/scanners.
wait a minute.
power them all up again, in that order: modem, router, computer, printers. Let each power up completely before going on to the next.
try a factor reset on your printer/scanner (if there is such a function). You'll have to check your manual for how. If you do that you'll have to enter the wifi password in your printer/scanner, assuming you have security on your network.
uninstall any printer manufacturer "utilities" that are on your Mac, and try Image Capture again.
If it is a compatible software issue, you could try VueScan, but I've never needed to use it.

Since the iOS7.0.2 update to my iPhone 4S, I can no longer choose use of my Bluetooth device if using the power cord to listen to MUSIC or answer my phone (choice of powercord as 'dock,' speaker,

Since the iOS7.0.2 update to my iPhone 4S, I can no longer choose use of my Bluetooth device if using the power cord to listen to MUSIC or answer my phone (choice of powercord as 'dock,' speaker, & phone only). Was this former-feature now an oversight?? I'd really appreciate having my Bluetooth once again listed as a choice of audio option. Especially considering the battery life is not what it was prior to this update, and requires recharging often.

Sorry to tell you but unless you have a Retail Apple Store close by, they are the only ones I have found with all the adapters and accessories. I bought an extra lightning to usb adapter the other day to use in my truck. Good luck....

After upgrading to OS 10.8.1 I can no longer scan from my Canon MP240 printer when it is connected to Airport Express.

I can no longer scan from printer (Canon Pixma MP240) when it is connected to Airport Express, although printing is no affected. However, when connected directly to MBP scanning works fine. I have tried all the standard remedies; reinstalling drivers, resetting printer system, selecting sharing options, but no luck. Previous to Mountain Lion this function worked fine. Any ideas how to regain this capability?
Thanks,
J.

I'm almost completely certain that the scanning feature worked before the update. Having said that though, I don't scan a great deal and it may be the case that when I have done, the printer was directly connected to the MBP. However, since I have a laptop it's far more logical that I would have had the printer connected to Airport Express for reasons of portability so I can't really see that I would have had the printer connected directly to the laptop. Besides this, I have no memory of having this problem previously. Therefore, I don't think my memory is to blame although of course, if it were I'd have no way of knowing!
J.

I bought freehand MX, But after re-format my pc, this freehand programme can no longer be use. pls h

i bought freehand MX, But after re-format my pc, this freehand programme can no longer be use. pls help.
[ email address removed by forum host ]

And what exactly is the problem? What system? you need to be a lot more specific.
Mylenium

Another question concerning Context Expired and Can No Longer be Used error

I know this has been covered many times before - each time with essentially the same recommendations: Make sure the time zone is set for the web applications, make sure the clocks are synchornized between the hosts, adjust the timeouts (I've done defaults,
1 minute/2 minute and 5 minute/10 minute), extend security validation time outs, turn off security validation time outs.
Note of these has worked. It seems, from other folks with the issue, that this is a problem that's been stumping Microsoft as well. So I don't feel like paying them $500 bucks for a support session for this.
Has anyone come accross a better fix than the above?
Here's the latest correlation data from the logs. It points to the login timeout as the problem, but I'm at a loss as to what to do about it.
Thanks in advance.
Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.SharePoint.SPException: The context has expired and can no longer be used. (Exception
from HRESULT: 0x80090317) ---> System.Runtime.InteropServices.COMException: The context has expired and can no longer be used. (Exception from HRESULT: 0x80090317)
at Microsoft.SharePoint.Library.SPRequestInternalClass.SetHttpParameters(String bstrHttpMethod, String bstrRequestDigest, UInt32 flags, Guid gTranLockerId, Byte[]& ppsaImpersonateUserToken, Boolean bIgnoreTimeout, String bstrUserLogin, String bstrUserKey,
UInt32 ulRoleCount, String bstrRoles, Boolean bWindowsMode, String bstrAppPrincipalName, Boolean bIsHostHeaderAppPrincipal, String bstrOriginalAppPrincipalIdentifier, ApplicationPrincipalInfo& pAppUserInfo, Boolean bInvalidateCachedConfigurationProperties,
Int32 lAppDomainId, ISPManagedObjectFactory pFactory, Boolean bCallstack, ISPDataCallback pCanaryCallback)
at Microsoft.SharePoint.Library.SPRequest.SetHttpParameters(String bstrHttpMethod, String bstrRequestDigest, UInt32 flags, Guid gTranLockerId, Byte[]& ppsaImpersonateUserToken, Boolean bIgnoreTimeout, String bstrUserLogin, String bstrUserKey, UInt32
ulRoleCount, String bstrRoles, Boolean bWindowsMode, String bstrAppPrincipalName, Boolean bIsHostHeaderAppPrincipal, String bstrOriginalAppPrincipalIdentifier, ApplicationPrincipalInfo& pAppUserInfo, Boolean bInvalidateCachedConfigurationProperties, Int32
lAppDomainId, ISPManagedObjectFactory pFactory, Boolean bCallstack, ISPDataCallback pCanaryCallback)     -
-- End of inner exception stack trace ---
at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)
at Microsoft.SharePoint.Library.SPRequest.SetHttpParameters(String bstrHttpMethod, String bstrRequestDigest, UInt32 flags, Guid gTranLockerId, Byte[]& ppsaImpersonateUserToken, Boolean bIgnoreTimeout, String bstrUserLogin, String bstrUserKey, UInt32
ulRoleCount, String bstrRoles, Boolean bWindowsMode, String bstrAppPrincipalName, Boolean bIsHostHeaderAppPrincipal, String bstrOriginalAppPrincipalIdentifier, ApplicationPrincipalInfo& pAppUserInfo, Boolean bInvalidateCachedConfigurationProperties, Int32
lAppDomainId, ISPManagedObjectFactory pFactory, Boolean bCallstack, ISPDataCallback pCanaryCallback)
at Microsoft.SharePoint.SPGlobal.CreateSPRequestAndSetIdentity(SPSite site, String name, Boolean bNotGlobalAdminCode, String strUrl, Boolean bNotAddToContext, Byte[] UserToken, SPAppPrincipalToken appPrincipalToken, String userName, Boolean bIgnoreTokenTimeout,
Boolean bAsAnonymous)
at Microsoft.SharePoint.SPWeb.InitializeSPRequest()
at Microsoft.SharePoint.SPWeb.EnsureSPRequest()
at Microsoft.SharePoint.SPWeb.get_Request()
at Microsoft.SharePoint.Publishing.Navigation.SiteNavigationSettings..ctor(SPSite site)
at Microsoft.SharePoint.Publishing.Navigation.SiteNavigationSettings.GetSiteNavigationSettings(SPSite site)
at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapNode.GetNavigationChildren(NodeTypes includedTypes, NodeTypes includedHiddenTypes, Boolean trimmingEnabled, OrderingMethod ordering, AutomaticSortingMethod method, Boolean ascending, Int32 lcid)
at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.AddChildrenToControl(String parentId, PortalSiteMapNode node, Int32 depth, Int32 maxDepth)
at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.InitializeNavigationEditSort()
at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaNavigationSettingsPage.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Barry Cohen

Hi Barry,
Thank you for your patience. Here are my suggestions about this issue:
1. Check SPNs for the application pool account for the web application ‘http://community.enet’ and take a screenshot: setSPN -L domain\app pool account (KVAERNER-NO\sno00769)
2. Ensure SharePoint WFE and APP boxes are trusted for delegation:
Trust for delegation.
Note: To perform this procedure, you must be a member of the Domain Admins group or the Enterprise Admins group in Active Directory, or you must have been delegated
the appropriate authority. As a security best practice, consider using Run as to perform this procedure.By default, no server is trusted for delegation, meaning that a service on a server in the Active Directory, cannot act on a user’s behalf, basically this
means that a service if trusted for delegation, can impersonate a user and request a Kerberos ticket in the users name.
Validate this setting in Active Directory using the following:
- Open Active Directory Users and Computers.
-In the console tree, click Computers. (Or the appropriate OU where your SharePoint Server resides)
-Right-click the computer you want to be trusted for delegation, and click Properties
-On the Delegation tab, check if ‘Trust this computer for delegation to any service (Kerberos only)’ is selected.
-Repeat this for all the servers in the SharePoint 2013 production farm.
3. Please let me know the SharePoint 2013 version. We recommend that you can upgrade to SharePoint 2013 SP1.
Best Regards,
Dats Luo

Your Voucher has been suspended and can no longer be used !!?

Hi guys,
I have purshased 2 vouchers for 2 Java exams it's been a while, they have both expiration date at 31-AUG-2013 , lately when I tried to apply them for my exam at PearsonVue a message appears and tells me that "the voucher is SUSPENDED and can no longer be used"
I don't understand what is going on and they dont even tell why it is suspended
is there something I can do about it? thanks in advance
- Kacem

I'm pretty sure that for this situation, you'll need to contact Oracle Certification Support Oracle University - Support Form. If it is the issue that I suspect, Oracle Certification Support will need to assist. Please provide the voucher numbers when you contact Oracle, they will need to know the voucher numbers and any purchase info you have - where did you purchase, how did you pay, can you provide a receipt?
Regards,
Brandye Barrington
Certification Forum Moderator

I got a error(The Content has expired and can no longer be used)

Hi,
I built a SharePoint 2013 Farm.
Infrastructure composition is:
・WebFrontEnd Server * 2(Web#1,Web#2)
・Application Server * 1
・SQL Server * 1
・OfficeWebApps Server * 1
・etc(DPM,AD,DocAve)
Site composition is:
・Community Site(Customize Site)
・Enterprise Search Center
After that, I added a WebWebFrontEnd Server(Web#3) to the SharePoint Farm.
So, I had a trouble.
The Enterprise Search Center had not been able to displayed in Web#1 and Web#2.
But, Web#3 is displayed Enterprise Search Center.
When The Enterprise Search Center had not been able to displayed, I get a error message.(The context has expired and can no longer be used. (Exception from HRESULT: 0×80090317))
Does Anyone have the same trouble?
Thanks,
Tomohiro

HI tomohiro,the issue could be of many reasons like the Time not set correctly,App pool.Please check the below link that gives more information on the resolution.
http://expertsharepoint.blogspot.de/2014/10/the-context-has-expired-and-can-no.html
Anil Avula[Partner,MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

SharePoint Navigation Error:The context has expired and can no longer be used. (Exception from HRESULT: 0x80090317)

Hi,
I take a exeption on the SharePoint 2013 left navigation.
Exeption: "The context has expired and can no longer be used. (Exception from HRESULT: 0x80090317)"
I searched this exeption keyword on the internet and I find usualy 3 results
1)check datetime servers --> I checked datetime for all SP Severs ,DB server and AD server ..there is no problem
2)Disabled the WebPageSecurity Validation on CA>General Settings-->I tired and problem not solved
3) Reset IIS --> if I restart IIS problem solved but after 2-3 hours or anytime error comes again..
ULS Log:
PortalSiteMapProvider was unable to fetch children for node
at URL: /MySite/MySubSite, message: The context has expired and can no longer be used. (Exception from HRESULT: 0x80090317), stack trace:
at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)
at Microsoft.SharePoint.Library.SPRequest.SetHttpParameters(String bstrHttpMethod, String bstrRequestDigest, UInt32 flags, Guid gTranLockerId, Byte[]& ppsaImpersonateUserToken, Boolean bIgnoreTimeout, String bstrUserLogin, String bstrUserKey, UInt32
ulRoleCount, String bstrRoles, Boolean bWindowsMode, String bstrAppPrincipalName, Boolean bIsHostHeaderAppPrincipal, String bstrOriginalAppPrincipalIdentifier, ApplicationPrincipalInfo& pAppUserInfo, Boolean bInvalidateCachedConfigurationProperties, Int32
lAppDomainId, ISPManagedObjectFactory pFactory, Boolean bCallstack, ISPDataCallback pCanaryCallback)
at Microsoft.SharePoint.SPGlobal.CreateSPRequestAndSetIdentity(SPSite site, String name, Boolean bNotGlobalAdminCode, String strUrl, Boolean bNotAddToContext, Byte[] UserToken, SPAppPrincipalToken appPrincipalToken, String userName, Boolean bIgnoreTokenTimeout,
Boolean bAsAnonymous)
at Microsoft.SharePoint.SPWeb.InitializeSPRequest()
at Microsoft.SharePoint.SPWeb.EnsureSPRequest()
at Microsoft.SharePoint.SPWeb.get_Request()
at Microsoft.SharePoint.Publishing.Navigation.SiteNavigationSettings..ctor(SPSite site)
at Microsoft.SharePoint.Publishing.Navigation.SiteNavigationSettings.GetSiteNavigationSettings(SPSite site)
at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapNode.GetNavigationChildren(NodeTypes includedTypes, NodeTypes includedHiddenTypes, Boolean trimmingEnabled, OrderingMethod ordering, AutomaticSortingMethod method, Boolean ascending, Int32 lcid)
at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapNode.GetNavigationChildren(NodeTypes includedTypes, NodeTypes includedHiddenTypes, OrderingMethod ordering, AutomaticSortingMethod method, Boolean ascending, Int32 lcid)
at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapNode.GetNavigationChildren(NodeTypes includedHiddenTypes)
at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapProvider.GetChildNodes(PortalSiteMapNode node, NodeTypes includedHiddenTypes)
Plaase Help.

Hi Veli,
Please check the security token timeout value and it is set to 1440 as expected by default. You can check via running the command:
stsadm -o getproperty -pn token-timeout
Then check the OOB recycle times of the probkematic web application pool, and add daily recycle times for the problematic web application pool. You can do as the article:
http://technet.microsoft.com/en-us/library/cc754494(v=WS.10).aspx
Best Regards,
Wendy
Wendy Li
TechNet Community Support

The context has expired and can no longer be used. (Exception from HRESULT: 0×80090317)

I have followed the instructions on this blog. http://blog.cloudshare.com/2012/10/22/how-to-fix-sharepoint-2013-web-application-error-the-context-has-expired-and-can-no-longer-be-used/ and
it fixes the problem for a short time. I have to keep doing IISResets to get my farm backup.
Please Help.

Have you trid Ajay Khanna's suggestion from the comments field?
From Central Admin- Select the web application and Select --> Web Application General Settings --> Navigate to 'Web page Security validation', change or disable the timeout field.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

The context has expired and can no longer be used

I am running across a repeatable error when accessing a specific Site Collection. EVERY TIME the SC is loaded we receive the error 'The context has expired and can no longer be used'.
I have already validated the SharePoint servers' time zones are all the same and match the web application(s), as well as set the 'Web
page Security validation' to "Off".
What else could I be missing? Could this have anything to do with Distributed Cache?
- Rick

Hi,
We just began to have the same error. The servers are also correctly set for the timezone (UTC) as well as the Web Applications.
The error happens for every site collections, there isn't a specific site where I'm able to reproduce the issue.
This is the ULS :
05/27/2014 12:59:05.98 w3wp.exe (0x1524) 0x0780 Web Content Management Publishing Cache ahh6l Verbose CreateListItemFromUrl : Parameters url : '/sitename/SitePages/Home.aspx', enableCheckedOutItem : 'True', checkedOutByCurrentUser 'False' retVal Id = '4618889e-0e1c-4503-a7fb-70fd36e2661d'. 01ff949c-98cc-d0fb-9795-c691c2852f54
05/27/2014 12:59:05.98 w3wp.exe (0x1524) 0x0780 Web Content Management Publishing Cache ahh6l Verbose CreateListItemFromUrl : Parameters url : '/sitename/SitePages/Home.aspx', enableCheckedOutItem : 'True', checkedOutByCurrentUser 'False' retVal Id = '4618889e-0e1c-4503-a7fb-70fd36e2661d'. 01ff949c-98cc-d0fb-9795-c691c2852f54
05/27/2014 12:59:06.00 w3wp.exe (0x1524) 0x0780 SharePoint Foundation Runtime tkau Unexpected System.Runtime.InteropServices.COMException: The context has expired and can no longer be used. (Exception from HRESULT: 0x80090317) at Microsoft.SharePoint.Library.SPRequestInternalClass.SetHttpParameters(String bstrHttpMethod, String bstrRequestDigest, UInt32 flags, Guid gTranLockerId, Byte[]& ppsaImpersonateUserToken, Boolean bIgnoreTimeout, String bstrUserLogin, String bstrUserKey, UInt32 ulRoleCount, String bstrRoles, Boolean bWindowsMode, String bstrAppPrincipalName, Boolean bIsHostHeaderAppPrincipal, String bstrOriginalAppPrincipalIdentifier, ApplicationPrincipalInfo& pAppUserInfo, Boolean bInvalidateCachedConfigurationProperties, Int32 lAppDomainId, ISPManagedObjectFactory pFactory, Boolean bCallstack, ISPDataCallback pCanaryCallback) at Microsoft.SharePoint.Library.SPRequest.SetHttpParameters(String bstrHttpMethod, String bstrRequestDigest, UInt32 flags, Guid gTranLockerId, Byte[]& ppsaImpersonateUserToken, Boolean bIgnoreTimeout, String bstrUserLogin, String bstrUserKey, UInt32 ulRoleCount, String bstrRoles, Boolean bWindowsMode, String bstrAppPrincipalName, Boolean bIsHostHeaderAppPrincipal, String bstrOriginalAppPrincipalIdentifier, ApplicationPrincipalInfo& pAppUserInfo, Boolean bInvalidateCachedConfigurationProperties, Int32 lAppDomainId, ISPManagedObjectFactory pFactory, Boolean bCallstack, ISPDataCallback pCanaryCallback) 01ff949c-98cc-d0fb-9795-c691c2852f54

I can no longer scan using HP d110 after Mavericks

Similar Messages

Maybe you are looking for