I CAN NO LONGER SYNC ANY OF MY APPLE PRODUCTS, WHEN I ATTACH THE I-PAD TO THE COMPUTER VIA USB IT DOES NOT TRY TO CONNECT TO THE PRODUCT, I HAVE CHANGED CORDS, USB PORTS LOCATIONS, RE-INSTALLED I-TUNES. THIS STARTED AFTER MORE RAM WAS ADDED
I CAN NO LONGER SYNC ANY OF MY APPLE PRODUCTS TO I=TUNES, I HAVE CHANGED CORDS, CHANGED USB LOCATIONS, TRIED DIFFERENT ((I-PAD, I-PHONE) AND NONE WILL TRY TO SYNC. I HAVE RE-INSTALLED I-TUNES. NOTHING WORKS. THIS STARTED WHEN RAM WAS ADDED TO COMPUTER.
Hi, can you take the RAM out and try again? Sounds strange that RAM would cause this.
What computer type are you using and what OS?
Similar Messages
-
has anyone had issues with syncing music? i can no longer sync any of my music that was already on my itunes to my phone for some reason???
Since this first message, the "Other" space has increased exponentially. The first time, after the "restore", it increased to over 9 GB. Later, I tried a minor restore again, and now it's over 10 GB. I've seen someone suggest that text messages are to blame. If my text messages are suddenly taking up 4 GB of space, I think we've got bigger problems.
-
Had my ipod locked and put it on charger, now it will not even turn on and does not even register connected to the puter? Any ideas???
You just need to reset the ipod by holding down the sleep button and home button for ipod touch or the menu and centre button on others for about 10 seconds
-
This is the 3rd issue I have had with Apple products in the last 6 months. I begininng to wonder if this is the beginning of the end:(
Hello abaneki,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Have a nice day,
Mario -
When I am on a website like say Southwest Airlines and there are drop down menus to choose dates, cities, etc. The drop down flashes quickly and then goes away. I can't use the drop down on the next question -- This happened.
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us! -
please see what I wrote above thanks
Just above the textarea that you use to enter the message text on the "Compose New Mail page" there is usually a button bar with buttons to add text formatting like Bold and Italic.<br />
That toolbar may also have a button to turn a text link into a clickable hyperlink (look for a chain like button).<br />
You can select the text and click that button to turn the link into a clickable hyperlink.<br />
If you can't find the button then hover them all to check the tooltip of each.<br />
<br />
* Make Link - https://addons.mozilla.org/firefox/addon/make-link/ -
After upgrading to Imac updating Iphone and Ipad I can no longer sync in Itunes
I have newly upgraded to IMac and love it! I also traded in my IPad to IPad Air and updated my IPhone from 4S to 5C. When I was using a Windows PC I had all my gadgets synced to ITunes (this includes a MacBook Pro and two IPods, Yes I'm hooked). Now I can no longer sync any of my gadgets to ITunes on the new IMac.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
External USB HD does not work with HAL:
External USB HD does not work with HAL:
From the last 10 days the HAL auto-mount with ntfs-3g file system of my external hard drive does not woks.
But the manual mount procedure with the command mount -t ntfs-3g /dev/sdb* /mnt/XYZ works.
I've followed the instructions in the wiki: http://wiki.archlinux.org/index.php/HAL and the system has worked up to the last kernel or HAL update.
My fat32 usb-stick works without any problem.
If I try to open the device with KDE it appears an error popup wit this message:
TODO: have to rethink extra options
Error: kio_media_mount_helper
The log from the kernel.log is
Nov 6 22:03:16 myhost usb 5-1: new high speed USB device using ehci_hcd and address 4
Nov 6 22:03:16 myhost usb 5-1: configuration #1 chosen from 1 choice
Nov 6 22:03:17 myhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 6 22:03:17 myhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 6 22:03:17 myhost Initializing USB Mass Storage driver...
Nov 6 22:03:17 myhost scsi6 : SCSI emulation for USB Mass Storage devices
Nov 6 22:03:17 myhost usb-storage: device found at 4
Nov 6 22:03:17 myhost usb-storage: waiting for device to settle before scanning
Nov 6 22:03:17 myhost usbcore: registered new interface driver usb-storage
Nov 6 22:03:17 myhost USB Mass Storage support registered.
Nov 6 22:03:22 myhost scsi 6:0:0:0: Direct-Access WDC WD32 00JB-00KFA0 0811 PQ: 0 ANSI: 0
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sdb: sdb1
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Attached SCSI disk
Nov 6 22:03:22 myhost sd 6:0:0:0: Attached scsi generic sg2 type 0
Nov 6 22:03:22 myhost usb-storage: device scan complete
and the error.log is
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Do you have some idea ....
Bye.I have done the following:
Downloaded the patched hal version.
used makepkg in /abs/local/trunk/ to create a pkg for pacman
used sudo pacman -U pkgname to install it.
used sudo nano /etc/hal/fdi/policy/preferences.fdi to create the fdi file with the following content:
saved the file and removed my ntfs entryes from fstab and rebooted. and still there is no automount off ntfs partitions.
have i done something wrong?
br fjodork
WARNING: what follows is a guide of what did work for me, I'm still in an early stage of learning linux, so please correct me if anything of what follows is wrong/dangerous/stupid. As I said, this worked for me, it's not pretty, since I was learning each step on the fly and I'm sure there are better ways to do this.
So fjodork, you seem to have done the the necessary steps, though i couldn't get it to work until i first removed hal without dependencies
pacman -Rd hal
it will give you some warning about the dependencies, ignore it since we are reinstalling hal in a few steps.
First i tried to follow Raymano's link, obviously it showed me nothing in the browser so I thought it might be a broken link.
So I downloaded the source tarball from here http://hal.freedesktop.org/releases/hal-0.5.10.tar.gz
unpacked it changed the /tools/hal-storage-mount.c as per Milfadoodle's instructions.
at first I tried to compile directly from source, the process would finish without a glitch though after reboot nothing changed, as if hal weren't
installed, i guess there were issues with paths. anyway read on
Then repacked the source in tarball, copied it to /var/abs/extra/system/hal and modified the PKGBUILD as follows
makedepends=('pkgconfig' 'gperf')
options=('!libtool')
install=hal.install
source=(${pkgname}-${pkgver}.tar.gz #removed url so makepkg looks in the current directory for the tarball
hal
hal-policy.patch
cryptsetup_location.patch
hal-0.5.9-hide-diagnostic.patch
ntfs3g-valid-options.patch)
md5sums=('6641c30a27c00485c6accac5110ff911' # replace with md5sum of your package's sourceball (run md5sum filename)
'882f67668cb14a0a9e4a27ef22278027'
'5ba8b610aa9763a5f42b9f7cbd7a86ad'
then makepkg (i had to add --asroot, don't ask why
and finally pacman -U hal-0.5.10-1-i686.pkg
another reboot and everything worked without a glitch!:D (yeah i know i still haven't got rid of the reboot mentality )
I have also put the policy files as per the wiki instructions.
PS: I know this is a dirty way to getting things done but as i said, I'm just starting
If anyone could comment/correct/explain this post I'd be more than happy, the automount issue was bothering me for about a month now (you'll say why do I need ntfs in the first place? well, I only recently switched for Linux as my primary OS, these are some relics of the M$ era -
Can not get mail, connection to the server failed
have been recieving/using work emails and calender via exchange for years but as of this week i have lost access all i keep getting is 'can not get mail, connection to server failed. i have change password but still not working any advise PLEASE..
Hmmm. I've seen that message before, I usually just continue with the account and save it, then power off /on the phone. It usually works after that.
Has anything change with your account? -
After installing the latest update to itunes, and my ipod, I can no longer sync my computer and my ipod nomatter what I do. I have tried everything I know and can read. I am beginning to think it has something to do with the password that I changed, but I tried to change it back and nothing happens. Does anybody have any suggestions. I have been working on this for three hours and I can't figure it out? Apple is no help and it was their updates that messed the whole thing up.
Kathy295http://kb.mozillazine.org/New_messages_do_not_appear
-
I can no longer sync my iPhone 5 with 8.2 by wi-fi after installing Yosemite 10.10.2 and iTunes12.1.0.50. I can only sync by cable. Any solutions?
Hello Josephene,
Welcome to the Apple Support Communities!
I understand that after recently updating to the most recent versions of Mac OS X and iTunes. To troubleshoot iTunes Wi-Fi syncing not working as expected, please work through the suggested steps located in the attached article.
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing - Apple Support
Have a great day,
Joe -
Both my iPod touch and iPad have been syncing properly with iTunes, until todat that is. I downloaded iTunes 11.1.5 and now iTunes isn't showing up/reading/detecting any of my devices. I can no longer sync both my iPod touch and iPad. Please HELP
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates -
I just installed 11.0.5.5 and I can no longer sync with my iPhone 4 or my iPhone 5. Any thoughts? It went from accurately displaying my content to showing most of the content as "Other" and now says it can't sync because it can't determine the apps to sync.
Hi,
I have sync issue, too, but a bit different. When connecting my iPhone 4 and hitting the sync button in iTunes 11.0.5 (5), the synch process starts, gets stuck at step 5, then eventually finishes without any error message, but content (TV series / movies) are not updated on the iPhone.
I already tried to power cycle my MacBook (Intel 13" running Mac OS X Lion) and my iPhone 4 (iOS 6.1.3).
Was working perfectly before upgrading iTunes. Anybody has a solution to this yet?
Thanks in advance.
Martin -
I just updated my iPad to IOS 7.02 and unfortunately can no longer sync with my MacBook running OS 10.5.8. I'm wary about updating to Lion as this may cause any number of apps on my Macbook not to work at all or malfunction. Also my MacBook is 5 years old, and I was thinking about purchasing a new computer. I would like to decide when rather than be forced though. Does anyone have any suggestions for a work around? At the moment I do not subscribe to the cloud, and it looks like that is the only way I can back up my iPad now.
Upgrade to Snow Leopard - it's compatible with the latest version of iTunes, and still supports PowerPC applications.
$19.99 - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Snow Leopard is required if you wanted to upgrade to Lion, anyway, which you may want to in the future if the latest version of iTunes no longer supports Snow Leopard. -
My Itunes on my laptop will no longer sync any podcasts or audiobooks to my mini Ipad, and my Ipod as well. After I sync and try to play a podcast on both I get the following podcast is temporarily unavailable! I can downld on ipad and it works, I just did a disagnostics check, and I get there error Secure Link to Itunes has failed? *** over >? anyone thank you
Upgrade to Snow Leopard - it's compatible with the latest version of iTunes, and still supports PowerPC applications.
$19.99 - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Snow Leopard is required if you wanted to upgrade to Lion, anyway, which you may want to in the future if the latest version of iTunes no longer supports Snow Leopard.
Maybe you are looking for
-
How to use MSCOMM with teststand
Hello All, I want to communicate with serial port via MSCOMM component in teststand,And I have already regestered MSCOMM in PC.But I can't find it in "automation server" on the module tab. Look forward to your reply.Thanks. BR
-
Hi, While selecting a particular responsability i am getting the error window with the following error. APP-01508: Failed to connect Cause: Application Object Library was unable to connect to the ORACLE database. Action: Check for ORACLE errors to fi
-
What is advisable? [Jar the property file or not?]
About standalone applications, what is advised? shall the properties file and other configuration files be a part of the jar file or not? One benefit keeping them out is to have a privilege of 'not-building' the entire code just to change the configu
-
How can I update my iPad one to new ios7? Thank you and please give me the answer ASAP.
-
Including logical path into my transport request!!
hi i have defined a logical filepath for my report from where it will read the files .... can i include this file path in to my TR...which i have created using transaction FILE if so how should i include.. thanks.