I can not access my hard disk protected by Bitlocker drive despite the right recovery key

I had locked my 1 TB harddisk 1 year back with BitLocker Drive. I have been using its recovery key to unlock it since then. But since 3 days back, it has been displaying the message " Error recovering disk. The recovery key entered is not correct, try
it again." And I am not able access my important documents despite of having the right key.
Please help me. Thanks alot in advance.

One of the greatest feature of MBAM is single-sign of Recovery Key which means if a recovery key is used once, it will be automatically re-generated. So, first match the 8 digit starting of Recovery ID with its associated recovery key.
Or re-request for the Recovery Key to your MBAM Administrator by providing him the starting 8 digit recovery ID. You can also get the recovery key again using the MBAM self-Service Portal.
Gaurav Ranjan

Similar Messages

  • I accidentally deleted some drivers from my macbook air and now i can not access app store and system preferences as it says the following message (You can't open the application System Preferences because it may be damaged or incomplete)

    i accidentally deleted some drivers from my macbook air and now i can not access app store and system preferences as it says the following message (You can't open the application System Preferences because it may be damaged or incomplete)

    Repair the Hard Drive and Permissions - Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.

  • I have forgotten my security question answers and can not access my account settings without them. What is the answer?

    I have forgotten my security question answers and can not access my account settings without them. What is the answer?

    Alternatives for Help Resetting Security Questions and/or Rescue Mail
         1. If you have a valid rescue email address, then use this procedure:
             Rescue email address and how to reset Apple ID security questions.
         2. Fill out and submit this form. Select the topic, Account Security. You must
             have a Rescue Email to use this option.
         3. This is the only option if you do not already have a valid Rescue Email.
             These are telephone numbers for contacting Apple Support in your country.
             Apple ID- Contacting Apple for help with Apple ID account security. Select
             the appropriate country and call. Ask to speak to the Account Security Team.
    Note: If you have already forgotten your security questions, then you cannot
             set up a rescue email address in order to reset them. You must set up
             the rescue email address beforehand.
    Your Apple ID: Manage My Apple ID.
                             Apple ID- All about Apple ID security questions.

  • I can not find my Hard disk

    I was useing my hard disk fine but i downlod the program (Register NTFS for Mac OS X) and
    The program ended with validity after that my hard disk dose not showing

    Uninstall the program. It should have come with an uninstaller. If not, contact the developer for instructions.

  • The computer can not find any hard disk

    hello to me appeared a problem installing an SSD in my mac pro 1.01 of 2007 afterrestarting the mac I went out one with a question mark with the famous gray screen, and I do not recognize any system disk.

    Hold down the Option key as you start up.
    Wait for the screen to be drawn with Icons for each bootable volume.
    If your SSD is there, choose it and click the arrow below it.
    Then use System Preferences > Startup Disk ...
    ... to set the correct Startup Disk
    If your SSD is not among those shown, choose Recovery HD from those shown, and use Disk Utility "Repair Disk" on it.

  • My old computer died so I can not access it. My ipod classic still has all the music and stuff on it. Can I transfer it to my new computer?

    How do I get me music and stuff from my Ipod to my new computer without having access to my old one???

    scroobyplex wrote:
    Yes. Install iTunes, enable the iPod for it, authorize the PC and sync. iTunes should copy all files to library.
    Nope, doesn't work that way.
    Copy the media from the old computer or the backup of the old computer.
    iDevices are not backups.
    You can transfer iTunes purchases from an iDevice to an iTunes library, but attempting to sync to a new, empty library will wipe the content on the iDevice.

  • Can not access Server admin site

    I can not access http://MYSERVER1:50000 site. I get error "The page cannot be displayed. The page you are looking for is currently unavailable.".
    But I was able to access even yesterday. Could you tell me any possible problems and how to fix the error?
    Thanks!
    Mike

    Hi Mike
    That means your J2EE engine is not running...
    Restart the engine, also check that the DB is up and running.
    Regards
    Juan

  • Can not access DVR or program DVR to record via web or apps

    I can not access my DVR remotely via a PC or via the apps.  I get a message that says cannot connect to your DVR right now, try again later.  It has been like this for weeks.  I called tech and they reset all the boxes, the ONT, I removed the COAX etc. rebooted and cleared router.  The box can be seen online though just not the DVR.  Also, on screen caller id does not work and the fix application does not fix it either.

    It seems like I lose web access to the DVR every week.
    I either have to unplug the DVR or have Verizon send a reboot signal. Even that doesn't work every time. It is a really annoying and inconvenient problem.

  • TS3988 How do I get the iCloud sign in to stop appearing?? I can not access anything on my ipad as the pop up keeps appearing

    My iCloud sign in pops up on my ipad. I can not access anything. How do I get rid of the pop up so I can access my ipad??

    You'll have to connect it to wifi so you can sign in with your password to authenticate the account.  If the pop-up is blocking you, try resetting the iPad (hold the power and home buttons at the same time until you see the Apple logo, then release).  As soon as you can after it restarts, go to Settings>Wifi and connect to your home network before the pop-up comes back.

  • Can not Access disk drive attached to WRT350N via an FTP client

    Background
     I have a WRT350N v1 running the most current firmware. I have a static IP address for the WRT350N and I can ping it over the internet.  I have a disk drive attached to the 350N with a FAT32 partition that has been set up for shared access for a selected group and user. I have worked with cicso/linksys support to verify the linksys350N is set up correctly (?).
    Problem
    I can not access the disk drive attached to the WRT350N via an FTP client. I have tried the following FTP Clients: Transmit and Filezilla.  I get a "Connection established, waiting for welcome message...' message on the FTP client. Then it says Connect timeout, Can not connect to server. I CAN connect to other FTP sites so its not the FTP client software.
    What I have done so far
    1. deleted the old  and added a new FTP group and user
    2.  unplugged and reconnected my WRT350N and my cable modem
    3. Contacted Cisco/linksys support on-line and they verified my setup and can ping my 350N but thats as far as they are willing to help
    I haven' a clue as to what to do next. Any and all help is greatly appreciated. 

    Access your router set-up and make sure you have :
    1. Enabled FTP Server and Internet Access under the FTP Server subtab under Storage...
    2. Reduced the MTU size to 1300 under SetUp...
    3. Unchecked Filter Anonymous Internet Requests...
    If you have done all this and nothing works, then, you need to upgrade your router's firmware and re-configure your router and then enter the settings...
    Download Firmware 3.23 MB...
    Follow these steps to upgrade the firmware on the device : -
    Open an Internet Explorer browser page on a computer hard wired to the router...
    In the address bar type - 192.168.1.1...Leave the username blank & in password use admin in lower case...
    Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
    Wait for few seconds until it shows that "Upgrade is successful"  After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
    Now reset your router :
    Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
    1. Enable FTP Server and Internet Access under the FTP Server subtab under Storage...
    2. Reduce the MTU size to 1300 under SetUp...3. Uncheck Filter Anonymous Internet Requests...See if this works for you...

  • Help! When i connect my "iomega" External hard drive to my mac it does not show in devices or on the desktop, how can i access my hard drive?

    Help! When i connect my "iomega" External hard drive to my mac it does not show in devices or on the desktop, how can i access my hard drive?

    what format your iomega HD is it NTFS , if NTFS try download   http://www.apple.com/downloads/macosx/system_disk_utilities/ntfs3g.html

  • I can not access the hard drive connected to my airport extreme!  Any thoughts?

    I can not access the hard drive connected to my ariport extreme.  When I use the finder to connect a server and type in the IP of the a. extreme, 10.0.1.1 it does not work and I get an error message.
    Any thoughts.
    A

    Is the hard drive formatted for Mac in Mac OS Extended (Journaled)?
    If yes, you may need to use a powered USB hub since the USB port on the AirPort Extreme is under powered and it is often necessary to use a powered hub....even if the hard drive has its own power supply
    If both items check out above.....have you checked Finder Preferences to make sure that "Connected Servers" will be displayed?
    Finder Preferences > General > Show These Items on the Desktop > Connected Servers
    Then with the Finder menus displayed at the top of the screen click the Go menu
    Click Network and the AirPort Extreme icon should be displayed
    Double click the icon to mount the drive on the desktop

  • I lost my images from my hard drive and now I can not access them in Lightroom. What can I do?

    I lost my images from my hard drive and now I can not access them in Lightroom. What can I do?

    Your images are truly no longer present on the hard drive(s)? Have you had your operating system do a search for them?
    If such a search fails to find them, here's what I would do, in order
    Look in the trash can/recycle bin
    Restore from backups
    If you don't have backups ... well, why not? ... find a program on the internet called an "undelete utility" (free versons are available) and then download and install it and run it. If you are going to do this, then do not perform any other tasks on your computer except find the program, download it (if possible to a different drive than the photos were stored on), install it (if possible to a different drive than the photos were stored on), and run it. In the future, you will need to commit to making regular backups of your photos and of your Lightroom catalog file, no excuses.
    If that doesn't work, but the thumbnails still appear in Lightroom, you can probably recover the thumbnails from Lightroom via a plug-in, but these would be low-resolution versions of your photos, if you really need instructions on this step, write back

  • Can not access the media card files Blackberry 8310 - HELP

    Can not access the media card files Blackberry 8310.
     I had a battery drain problem. The unit would only last 16 hours before completely drained. Purchased a new battery with the same result. I figured that I should try a complete reset so I did a hard wipe. Once that was done and I loaded the unit back up and returned online, the battery drain problem was resolved but now I can not access the media card.
     Here are the messages:
     “A media card has been inserted that contains encrypted content which will be unaccessible by this device”
     I can see the files. I have transferred them to my PC via the SD card but I can not open them. Here are the settings:
     Media card support – ON
    Encryption Mode: - Security Password & Device
    Encrypt Media Files – YES
    Mass Storage Mode Support – OFF
     Please note – I can not change the encryption mode since it is set by policy
     Security Options – General Settings – Content Protection – Disabled
     The version of Desktop Manage I am using is 4.2.1.8. When I try to use the Media Manager to move the files, I get an error message and can’t move the file. If I access the file on the card and try to display it, I get:
     Unable to display file /media card/ pictures/ing000000xx.jpg.rem
     Here is what I have tried (from the advice on this board):
     1)     Read the files directly off the media card – No good
    2)     Create a “new” folder on the media card and move a file into it then try to read it – No good
    3)     Email the file then read it – No good
    4)     Reset Encryption mode to off then try – Can’t do it – IT Policy setting
    5)     Be sure that the password was set the same as before the wipe (setting is password & device) – Can’t do it – The Blackberry prevents me from using an old password.
     So I think I can’t read the files because I can’t replicate the encryption key. Could that be right? My problem is that I do not understand why this would be the case. It is still the same device and since it knows what the old password was (because it would prevent me from using it again), why would it not generate a key to access the files?
     All I am trying to get off the card are pictures on my 6 year old … some are priceless. Can someone help me do this? One would think that this should not be this hard but from all the postings I have found, it seems that it is. And yes, shame on me for not moving the files before I did the reset (THAT will never happen again!) but this being unrecoverable is unconscionable given how many seem to find themselves in this situation.
     Thanks for any help you can offer!

    Not sure why you couldn't see them using mass storage mode. Did you have the pics stored on your media card? Try going to media-menu-explore-media card-blackberry-pictures See what the extension is on your pics. If any have the extension such as .jpg.rem they are encrypted.
    IrwinII
    Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

  • Setup did not find any hard disk drive in your computer

    I have an old Compaq Presario 7598 Desktop (Windows XP) which I use as a backup machine. Recently when I tried to start it I am getting "Unable to access hard disk,. Operating system not found on any devices". Then when I tried to start with XP Boot Disk (CD), I am getting "Setup did not find any hard disk drive in your computer".
    Can someone help me to resolve this issue?
    Thanks.

    Repeatedly tap the F10 key at boot, you should see information for the hard disk.
    Testing the hard drive:
    http://h20564.www2.hp.com/hpsc/doc/public/display?​docId=emr_na-bph05701#N100A0
    Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Maybe you are looking for