I can not access to buy in line pop

I can not use account to buy in line pop

Well, firstly the output was similar that "ORACLE_SID is not defined".
So I set ORACLE_SID=mySID.
Then I think it runs but I must enter in http://myIP:1158/em/console/
Dont run http://myIP:1158/em/
And first only runs in Firefox and dont in IExplorer 6. I dont know why, some ideas?
In adiction, when I logon in "Database Control" throught Firefox, first times then it shows "404 not found". But when I tried it again it seems thats runs.
Thanks again.

Similar Messages

Can not access on line banking after password

can not access on line banking after password

No change to password. Bank directed me to apple for possible problem. It happen after installing 'Yosemite'

Can not access server's on public ip's

Guys,
We have a core switch with two fibre lines connecting us through two different ISP's to the internet. These ISP's have provided us with a range of public ip's each. We have a few routers on some of these ip's and they are working fine and we can access them externally (telnet and ssh).
I am now busy setting up two servers, one on each ISP with their respective public ip's. I can ping the core switch and the isp gateways from the servers and from the core. I have triple checked that there are no active firewalls and I can see that the http ports are open and accessible (TcpView). But for the life of me I can not access those servers externally. I am now completely stumped. I do suspect though that it is a routing problem through the core.
And herewith the relevant parts from my Core switch's config:
version 12.2
service tcp-keepalives-in
service tcp-keepalives-out
hostname SMS-CORE
no aaa new-model
clock timezone ZAR 2
no ip source-route
mls netflow interface
mls cef error action reset
spanning-tree mode pvst
spanning-tree portfast edge default
vlan internal allocation policy ascending
interface FastEthernet3/25
switchport
switchport access vlan 153
switchport mode access
interface FastEthernet3/31
switchport
switchport access vlan 153
switchport mode access
interface FastEthernet3/35
switchport
switchport access vlan 153
switchport mode access
interface FastEthernet3/37
switchport
switchport access vlan 20
switchport mode access
interface FastEthernet3/47
switchport
switchport access vlan 20
switchport mode access
interface FastEthernet3/48
ip address 192.168.2.2 255.255.255.252
interface Vlan1
no ip address
interface Vlan20
ip address PUBLIC_IP1 255.255.255.240
interface Vlan153
ip address PUBLIC_IP2 255.255.255.248
ip classless
ip route 0.0.0.0 0.0.0.0 192.168.2.1
ip local policy route-map PUBLIC
access-list 100 permit ip ISP2_NETWORK 0.0.0.7 any
access-list 101 permit ip ISP1_NETWORK 0.0.0.15 any
route-map PUBLIC permit 10
match ip address 100
set ip default next-hop PUBLIC_GW2
route-map PUBLIC permit 20
match ip address 101
set ip default next-hop 192.168.2.1
Any ideas guys, I am at my wits end here ....
Thanks as always !

Hi Oliver ,
Have you got IP Address assigned to your server from the same segment ?? like for server 1
ip address PUBLIC_IP1 255.255.255.240
and for server 2
ip address PUBLIC_IP2 255.255.255.248
What is the gateway IP address assigned for both servers .
HTH
Sandy

I have a consultation with you. Because my sister is updating the IOS8 Iphone 4S. Then was not able to use it. Random screen freezes apple.So bring your instruments to Restore Center. Machine can use it. But can not access .

Dear Staff
I have a consultation with you. Because my sister is updating the IOS8 I phone 4S. Then was not able to use it. Random screen freezes apple. So bring your instruments to Restore Center. Machine can use it. But can not access the page that actually works. Because of the problems with ID of icloud.
She forgot the ID of the user and that of the other. I caught only a password is *******. I would like to ask for technical assistance. What should I do to get back to work normally. Or you can reset the ID and password or not., And set to work. If you do not have an iPhone, this airplane. It becomes a good paperweight itself.Hope you will understand. Buying splash, it is not easy because it's expensive.Learn to understand and to help.
Highly respected
Sarawut
My email: ********
<Personal Information Edited By Host>

It is locked to your sisters carrier.
She would have to ask her carrier if they unlock iPhones and if she qualifies for this service.

I can not access to the isqlplus from the client

Version: Oracle 10.1.0.2.0
I have installed Oracle 10.1.0.2.0 on SuSE Linux Enterprise Server 8.
I can access to my dbconsole from PC without any issue.
I can also access to the isqlus environment from the server without any issue.
But I can not access to the isqlplus from client or PC.
I can go the first web page of isqlplus by using isqlplus url by clicking on isqlplus icon under home page of dbconsole.
But I enetered username and password.Its bring error page.
Note: isqlplus start up on the server.
Any help wil be appricated.
D

The page cannot be displayed\
The page you are looking for is currently unavailable.
The Web site might be experiencing technical difficulties,
or you may need to adjust your browser settings.
Please try the following:
Refresh button, or try again later.
If you typed the page address in the Address bar, make sure that it is spelled correctly.
To check your connection settings, click the Tools- menu, and then click Internet Options .
On the Connections\ tab, click \ Settings\b0 .
The settings should match those provided by your local area network (LAN) administrator or
Internet service provider (ISP).
If your Network Administrator has enabled it,
Microsoft Windows can examine your network and automatically discover network connection settings.
\line If you would like Windows to try and discover them,
Detect Network Settings <javascript:doNetDetect
Some sites require 128-bit connection security. Click the \b Help\b0 menu and then click
\b About Internet Explorer \b0 to determine what strength security you have installed.
If you are trying to reach a secure site,
make sure your Security settings can support it.
Click the \b Tools\b0 menu, and then click \b Internet Options\b0 .
On the Advanced tab, scroll to the Security section and check settings
for SSL 2.0, SSL 3.0, TLS 1.0, PCT 1.0.
back button to try another link. \
Cannot find server or DNS Error\line Internet Explorer \

Can not access web wifi simble on but can not connect the the internet

wifi on but can not access internet

I COULD SOLVE THE PROBLEM!!! : CHANGE YOUR ISP
I it is obvious that we are talking about different issues, but all arise from the same origin. I am a surgeon and fortunately one of my patients is executive manager of one of biggest ISP companies from which I have bought my Internet service for home and my clinic.
One day I told him the problem and he promised to check it for me. A few days later he called me and discussed the exact problem (unfortunately as I am not I.T professional, I couldn’t understand it well, I can just remember he was talking about MULTIPLEXING incompatibility between Mac security settings and that specific ISP multiplexing settings, He also said they had similar problems with some Linux users. I can remember he relate the problem to cheap ISP hardware, which leads to security issues which are ignored by Windows Systems but leading to connection blockade in Mac Browsers. That’s why if you PING yahoo.com, you will see everything is OK but your browsers are not working)
In fact this is a hardware issue which is related to ISP (Internet Service Provider) security and not your Mac.
The day after, I took my MacBook to some ISP offices and asked them to let me connect to their line just for a test. “ Surprisingly I found out without changing my MacBook’s settings it works well with some ISPs and not with others!! “
I have two ADSL lines: one at home and one in my clinic. First I changed my home ISP and everything is well at home from the day I did the change. But before changing my clinic’s ISP it worked at home and not at the clinic. Later I changed my clinic’s ISP and afterward never I had any problem. This proves ( as that manager said also) this problem is related to ISP and not Mac itself and that’s why Apple could not have resolved the problem yet: different ISPs have different issues.
Here I can make some suggestions:
1- First, take your MacBook into different ISP offices and find the one which works well (before making the contract and paying money to the ISP, restart the Mac or send it into sleep mode repeatedly to make sure the connection never drops with restart or sleeps)
2- Change your modem: Modems as TP-LINK, D-LINK, are not well compatible with Mac. Apple modems or Linksys are perhaps the best choices (this is not main cause of internet drop, but can affect the performance)
3- Make sure your neighbor’s Wi-Fi is not exactly on the same channel as you are using (I use iStumbler for finding my neighbor’s channels)
4- Find best DNS: ask your ISP to provide you most compatible DNS’s for you. Perhaps most known DNSs are 8.8.8.8 and 4.2.2.4.It helps you to browse the Internet more efficiently
Some people in other forums suggested that upgrading to Mountain Lion has helped them. But It didn't work for my clinic's line. Just changing the ISP at clinic resolved my problem
BETWEEN THESE 4 SUGGESTIONS, THE FIRST ONE IS THE MAIN SOLUTION AND NO 2-4 CAN HELP THE PERFORMANCE.
Move on!!! Change your ISP and let me know if it works!!!!

Can Not Access Apps?

I can not access the App store? I have tried everything even update and all I get is a grey Apps screen?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Can not Access disk drive attached to WRT350N via an FTP client

Background
I have a WRT350N v1 running the most current firmware. I have a static IP address for the WRT350N and I can ping it over the internet. I have a disk drive attached to the 350N with a FAT32 partition that has been set up for shared access for a selected group and user. I have worked with cicso/linksys support to verify the linksys350N is set up correctly (?).
Problem
I can not access the disk drive attached to the WRT350N via an FTP client. I have tried the following FTP Clients: Transmit and Filezilla. I get a "Connection established, waiting for welcome message...' message on the FTP client. Then it says Connect timeout, Can not connect to server. I CAN connect to other FTP sites so its not the FTP client software.
What I have done so far
1. deleted the old and added a new FTP group and user
2. unplugged and reconnected my WRT350N and my cable modem
3. Contacted Cisco/linksys support on-line and they verified my setup and can ping my 350N but thats as far as they are willing to help
I haven' a clue as to what to do next. Any and all help is greatly appreciated.

Access your router set-up and make sure you have :
1. Enabled FTP Server and Internet Access under the FTP Server subtab under Storage...
2. Reduced the MTU size to 1300 under SetUp...
3. Unchecked Filter Anonymous Internet Requests...
If you have done all this and nothing works, then, you need to upgrade your router's firmware and re-configure your router and then enter the settings...
Download Firmware 3.23 MB...
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
1. Enable FTP Server and Internet Access under the FTP Server subtab under Storage...
2. Reduce the MTU size to 1300 under SetUp...3. Uncheck Filter Anonymous Internet Requests...See if this works for you...

Can not access internet via wired connection, wireless working OK

Background information,Came home from vacation turned on PC to access email.Emails started downloading then stoped,started getting messages that firefox stopped working and Thunderbird quit working and others.My desktop is attached to a verizon router.all my other devices are wireless and are working fine through the same router.I connected my laptop to the lan connection, turned off wifi and accessed the internet via lan connection.Using device manager, checked drivers, says up to date, also says that it is working properly.I have gone to the command line and can ping google.com.I can ping the loop around. ping127.0.0.1I have done the ipconfig/release,ipconfig/renew, and ipconfig/flushdnsipconfig/all indcates that it is there and enabledMy Lan connection is part of the mother board.can not access internet via wiredconnection.Not sure what to do next.Help Please

Reply: I spent about an hour last night doing all the things that you suggested including moving the lan cable from my desktop to my laptop which worked fine. When I hoover over the connection it says; Network3 Internet Access no error messages.When I unplug the cable at the router a red x covers that connection icon.Plug it back in red x goes away.It is seeing the router, just does not appear to be providing selected web page info.Computer thinks it is working fine.

I deleted safari off my computer. I can not access the Internet at all. Any idea how to wt it back?

I deleted safari off my computer. I can not access the Internet at all. Any idea how to wt it back?
The app is not found at all in my computer

If you’ve deleted or damaged the Safari application, you don’t have a backup, and you don’t have another web browser, proceed as follows.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
Copy or drag — do not type — the line below into the Terminal window:
open /Library/Application\ Support/Apple/.SafariArchive.tar.gz
Press return. The Archive Utility application will launch and run briefly. When it exits, enter the following line in the Terminal window the same way as above:
sudo cp -R Downloads/.SafariArchive/Applications/Safari.app /Applications/
Select the whole line by triple-clicking it, then copy or drag it to the Terminal window. Press return. This time you’ll be prompted for your login password, which won’t be displayed when you enter it.
There should be no output from the above command. If that’s the case, launch Disk Utility, select the boot volume and run “Repair Permissions” (not “Repair Disk.”) This is one of the few times there’s a reason to do that.
Next, two more commands in Terminal:
chmod -R -N Downloads/.SafariArchive
rm -r !$
Those are two separate lines; press return after each one. You can then quit Terminal.
Test Safari. If it works, you’re done. If not, you did some other damage to your system and need to reinstall.

TS1424 I have an HP Elite Book 2540p with Windows XP and can not get the iTuneStore on line. I keep getting a message that says I don't have an internet connect, but I am connected. Any suggestions?

I can not get iTunes Store on line. I keep getting a message that says I am not connected to the internet, but I know I am. I have to connect from three locations with the same results. Any suggestions?

Hello bigblue8
Check out the following articles for troubleshooting access to the iTunes Store. The first one will probably get you started enough to get it taken care of. If it does not the follow up article should definitely solve it for you.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Thanks for using Apple Support Communities.
Regards,
-Norm G.

When I plug in my Ipod touch to my computer a warning appears "The program cant start because MSVCR80.dll is missing." I can not access my Itunes library. Also, an "error 7 Windows error 126" appears as well. Any ideas?

When I plug in my Ipod Touch to my computer I can not access my Itunes library. The following message appears "The program cant start because MSVCR80.dll is missing." Also, another message appears as well - "Error 7 Windows error 126" as well as APSDaemon.exe.
I have NO IDEA what the heck to do.
Any ideas?
Thanks!

Issues installing iTunes or QuickTime for Windows
solving MSVCR80
iTunes 11.1.4 for Windows: Unable to install or open
Troubleshooting issues with iTunes for Windows updates

TS4002 I bought iPad and I can not access, A message appears asking me account and password when i return to the person who I purchased it from him, he told me that he forgot the account and password I want a solution to the problem, because in this way I

I bought iPad and I can not access, A message appears asking me account and password when i return to the person who I purchased it from him, he told me that he forgot the account and password
I want a solution to the problem, because in this way I will not benefit from the iPad

There is no solution. You have to provide the ID and password. There is no way around it. If the person you bought it from can't provide it, return it and get your money back.

Can not access sample & admin tools after configuring Oracle8.1.7

Hi all,
I am using WLS6.1(sp2) and WLPortal4.0(sp1).
I changed the default database(i.e. Cloudscape) to Oracle by following the doc
http://edocs.bea.com/wlp/docs40/deploygd/oraclnew.htm
But, after setting up the Oracle8.1.7, when i try to access the sample stock portal
from the homepage, i am getting the following exception
PortalPersistenceManager: portal 'portal/stockportal' not found
<Feb 20, 2002 12:33:19 PM EST> <Error> <HTTP> <[WebAppServletContext(1467076,stockportal,/stockportal)]
Servlet failed with S
ervletException
javax.servlet.ServletException: Received a null Portal object from the PortalManager.
at com.bea.portal.appflow.servlets.internal.PortalWebflowServlet.setupPortalRequest(PortalWebflowServlet.java:194)
at com.bea.portal.appflow.servlets.internal.PortalWebflowServlet.doGet(PortalWebflowServlet.java:99)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:241)
at weblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:112)
at jsp_servlet.__index._jspService(__index.java:92)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2495)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2204)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
even i can not access the admin tools.....i get the follwing error when i try
to access the portalTools/index.jsp
<Feb 20, 2002 12:38:18 PM EST> <Warning> <Webflow> <Webflow could not resolve
a destination given: appname [tools], namespace
[admin_main], origin [begin], event [defaultEvent] with request id [3121877];
Attempting to load Configuration-error-page.>
<Feb 20, 2002 12:38:18 PM EST> <Error> <Webflow> <Error while parsing uri /portalTools/application,
path null, query string n
amespace=admin_main - Webflow XML does not exist, is not loaded properly, or you
do not have a configuration-error-page defin
ed.
Exception[com.bea.p13n.appflow.exception.ConfigurationException: The configuration-error-page
node was not found in the webfl
ow xml file. for webapp [tools], namespace [admin_main]. While trying to display
CONFIGURATION ERROR: [Exception[com.bea.p13n
.appflow.exception.ConfigurationException: Bad Namespace - namespace [admin_main]
is not available for webflow execution. Mak
e sure the [admin_main.wf] file is deployed in webapp [tools].]],]
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processConfigurationError(WebflowExecutorImpl.java:786)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processWebflowRequest(WebflowExecutorImpl.java:484)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processWebflowRequest(WebflowExecutorImpl.java:419)
at com.bea.p13n.appflow.webflow.servlets.internal.WebflowServlet.doGet(WebflowServlet.java:132)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:241)
at weblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:112)
at jsp_servlet.__index._jspService(__index.java:92)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2495)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2204)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
>
Am i missing any step here???
can anybody help me????
thanks
Vijay

oops...i missed step5.
it is working now after doing the sync.
thanks
Vijay
"Daniel Selman" <[email protected]> wrote:
Did you sync the applications and load the sample data?
Sincerely,
Daniel Selman
"vijay bujula" <[email protected]> wrote in message
news:[email protected]...
Hi all,
I am using WLS6.1(sp2) and WLPortal4.0(sp1).
I changed the default database(i.e. Cloudscape) to Oracle by followingthe
doc
http://edocs.bea.com/wlp/docs40/deploygd/oraclnew.htm
But, after setting up the Oracle8.1.7, when i try to access the samplestock portal
from the homepage, i am getting the following exception
PortalPersistenceManager: portal 'portal/stockportal' not found
<Feb 20, 2002 12:33:19 PM EST> <Error> <HTTP><[WebAppServletContext(1467076,stockportal,/stockportal)]
Servlet failed with S
ervletException
javax.servlet.ServletException: Received a null Portal object fromthe
PortalManager.
atcom.bea.portal.appflow.servlets.internal.PortalWebflowServlet.setupPortalReq
uest(PortalWebflowServlet.java:194)
atcom.bea.portal.appflow.servlets.internal.PortalWebflowServlet.doGet(PortalWe
bflowServlet.java:99)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:265)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:200)
atweblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImp
l.java:241)
atweblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:112)
at jsp_servlet.__index._jspService(__index.java:92)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:265)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:200)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
ntext.java:2495)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
:2204)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
even i can not access the admin tools.....i get the follwing errorwhen i
try
to access the portalTools/index.jsp
<Feb 20, 2002 12:38:18 PM EST> <Warning> <Webflow> <Webflow could notresolve
a destination given: appname [tools], namespace
[admin_main], origin [begin], event [defaultEvent] with request id[3121877];
Attempting to load Configuration-error-page.>
<Feb 20, 2002 12:38:18 PM EST> <Error> <Webflow> <Error while parsinguri
/portalTools/application,
path null, query string n
amespace=admin_main - Webflow XML does not exist, is not loaded properly,or you
do not have a configuration-error-page defin
ed.
Exception[com.bea.p13n.appflow.exception.ConfigurationException: The
configuration-error-page>> node was not found in the webfl>> ow xml file. for webapp [tools, namespace [admin_main]. While tryingto
display
CONFIGURATION ERROR: [Exception[com.bea.p13n
appflow.exception.ConfigurationException: Bad Namespace - namespace[admin_main]
is not available for webflow execution. Mak
e sure the [admin_main.wf] file is deployed in webapp [tools].]],]
atcom.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processConfigurati
onError(WebflowExecutorImpl.java:786)
atcom.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processWebflowRequ
est(WebflowExecutorImpl.java:484)
atcom.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processWebflowRequ
est(WebflowExecutorImpl.java:419)
atcom.bea.p13n.appflow.webflow.servlets.internal.WebflowServlet.doGet(WebflowS
ervlet.java:132)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:265)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:200)
atweblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImp
l.java:241)
atweblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:112)
at jsp_servlet.__index._jspService(__index.java:92)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:265)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:200)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
ntext.java:2495)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
:2204)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
>
Am i missing any step here???
can anybody help me????
thanks
Vijay

Can not access Server admin site

I can not access http://MYSERVER1:50000 site. I get error "The page cannot be displayed. The page you are looking for is currently unavailable.".
But I was able to access even yesterday. Could you tell me any possible problems and how to fix the error?
Thanks!
Mike

Hi Mike
That means your J2EE engine is not running...
Restart the engine, also check that the DB is up and running.
Regards
Juan

I can not access to buy in line pop

Similar Messages

Maybe you are looking for