I can not boot my mac book air

I can not book myMac book air withaut power cabel . Power shows 96 % power .

Try a SMC reset
http://support.apple.com/kb/HT3964

Similar Messages

  • I can not get my mac book air off mute

    I can not get my mac book air off mute and it is grayed out in the "system Preferance" sound section page.

    OS X Mountain Lion 10.8.3
    Hopefully one of these steps should solve the problem.
    1. System Preference > Sound > Output > Internal Speakers
        Make sure Mute is not enabled.
    2. Remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    3. Reset PRAM.  http://support.apple.com/kb/PH4405
    4. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    5. Applications > Utilities > Audio MIDI Setup.app
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so uncheck it.
        Option click the speaker icon, if present and select Internal Speakers.
    6. Install Combo Update ML 10.8.3
    http://support.apple.com/kb/DL1640
    Best.

  • I can not get my mac book air to connect  to the net with my broadband

    How can I get my mac book air to connect to the net with a broadband ?

    Power off the router. Unplug it from the wall. Wait for few minuets.
    Power off the router. Wait a while.
    Connect the router back to to the wall.
    Power the router back on. Wait  until all lights are lit properly. It will take a while.
    Restart the computer.
    Start up in Safe Mode.
    http://support.apple.com/kb/HT1455
    For more on this:
    http://support.apple.com/kb/HT4628

  • HT204291 if i have a mid 2009 mac book pro and an apple tv that is the latest one. i can not mirror the mac book on my tv.  is it the fact that my computer is a little older than 2011 models which will work.  any info is greatly appreciated

    f i have a mid 2009 mac book pro and an apple tv that is the latest one. i can not mirror the mac book on my tv.  is it the fact that my computer is a little older than 2011 models which will work.  any info is greatly appreciated
    chuck schick

    Yes. You need 2011 or later in order to mirror as it requires the newer processor. The alternative is airparrot, which does it via software.

  • I can not make my mac book pro can turn on,when I press the button of power ,there is no response, I can not make my mac book pro can turn on,when I press the button of power ,there is no response

    I can not make my mac book pro can turn on,when I press the button of power ,there is no response, I can not make my mac book pro can turn on,when I press the button of power ,there is no response

    Maybe some help here:
    http://support.apple.com/kb/TS1367
    http://support.apple.com/kb/TS1365

  • How can I reset my Mac Book Air in to original/back to factory settings

    hi .. I got my New Mac Book Air in US (Ralehi) 2 weaks back only. Actually in the box the apple has not provided any recory disc or restoring discs. plese any boady can guide me how to create my restore disc aor how to i can rest my mac book air bac to factory rests. without disc how can i rest my mb air to factory settings.

    If it shipped with Lion, restart with the Option key held down, tab to the recovery partition, press Enter, and erase the drive from there. Install a new OS.
    (62586)

  • Can I leave my mac book air plugged in all the time at work, without damaging the battery?

    I know people may have asked this questions many times, however I intend on using my mac book air at work and would like know I I can leave it on powered on in the office and the unplugged at night?. Would it damage my MacBook?

    Yes. It will not damage the battery. You do not need to unplug it at night. If you use it from the AC charage all the time, then about once every two months you should use it on battery power until the battery drops below 20%. Then fully recharge the battery after which you should allow the battery to "rest" for about one hour. It is OK to use the computer during that time but do not yet connect the AC adaptor. Follow this practice and your battery should have a good life.
    About Batteries in Modern Apple Laptops
    Apple - Batteries - Notebooks
    Extending the Life of Your Laptop Battery
    Apple - Batteries
    MacBook and MacBook Pro- Mac reduces processor speed when battery is removed while operating from an A-C adaptor
    Battery University
    Apple - Batteries - iPod
    Apple - Batteries - iPhone
    Apple - Batteries - iPad
    Apple Portables- Calibrating your computer's battery for best performance
    Mac notebooks- Determining battery cycle count
    How to Calibrate Your Mac, iPhone, or iPad Battery | MacBlend

  • HT4199 i can t mirror my mac book air via apple tv.

    i bought apple tv 3rd generation and have a mac book air from mid 2012. i have problems mirroring my mac to aplle tv. there is now morroring icon.
    how can i set that up ?

    First, uninstall Clean My Mac. Third party so called Mac cleaning utilities can do far more harm than good. Your Mac runs maintenance for you in the background.
    http://macpaw.com/knowledgebase/cleanmymac/how_to_uninstall_cleanmymac
    Restart your Mac after you have uninstalled Clean My Mac.
    Hopefully you have a backup of your Bookmarks so then can be reimported back into Safari ..

  • Hi, I can't sync my Mac Book Air and iPhone5 calendars. I get a message from iTunes saying that the sync server failed to sync iPhone.  Any explanations and/or solutions?  Thanks.

    What can I do to sync Mac Book Air and iPhone 5 calendars if the iTunes message says that 'the sync server failed to sync iPhone'?
    Thanks,
    Julian

    Read the KB. Earlier today I had a fail to sync - I closed my Calendar app and the reopened and all was good.
    Sometimes just closing the app the relaunching is all it takes. At other times a reboot of the Mac is all that is needed.
    MJ

  • Can you buy a mac book air in america then bring it back to england to use?

    I will be going to america in the near future and was wondering whether if id be able to pick up a mac book air from an apple store over there. Should they work over here? Is there anything i should know ? thanks.

    Yes, as other posters have said simply remove all packaging. Pick yourself a nice laptop bag and carry it on the flight as hand luggage, and don't declare it to customs! Buy yourself a 13amp US - UK plug and you're fine to connect the power cable to UK mains.
    Also, if anything happens to go wrong with your Mac in the UK, so long as you are still in warranty it will be hounored in any UK Apple store.
    Good luck.

  • HT201343 Done everything on the list and can't get the mac book air to recognize the apple tv.  How do I get the icon to appear again?

    I have been using my apple TV with my amc book air with no problems.  Today I turned the apple TV on and got no icon on my air.  I made sure that the Apple TV was on airplay which it was and used preferences/display to hook up the Mac book Air but no recognision. Now what?

    Hello Pauldpetersen,
    Try the steps mentioned in below link and see if it works for you.
    http://support.apple.com/kb/ht5404
    And also go through:
    Troubleshooting AirPlay Mirroring

  • I can not get a mac book 2010 to boot to Target mode.

    I have a 2010 mac book i'm trying to zero out. But it will not boot to target mode connected t my mac book pro via fire wire 800 ( im using a thunder bolt>firewire 800 adapter)

    What if you disconnect the Firewire cable. Will it boot into Target Disk Mode then?

  • We get paid with cheques and organise specialised coloured aluminium. I can not rid my mac book pro or my IMac of the american spell checker.

    We get paid with cheques and organise, specialised coloured aluminium. I can not rid my apple devices, mac book pro, desktop IMac or IPhone of the american spell checker.
    Everything, Numbers and Pages et al, always default back to US English. To cap it all we sell luminaires (yes this is a word used in our world of lighting design everyday) Mac and Microsoft always default - my docs have more words underlined in red that not. I once found a permanent solution for Microsoft that removed US english - and then the laptop died. Can anyone rid me of this irritation.

    GOT IT FIXED!  WOW!
    I did better than filing a bug report.  I went to Apple support, chose chat support.  When it wanted $15 or was it $19 I filed an exemption which was a choice on the page, based on the fact that I recently upgraded to Yosemite.
    Got the chat fellow and here we go!!!!  ;-)  First off he sent me this app so he could see my screen.  Then he had me do a few things  like move the system configuration folder to the desktop and repair permissions.  Then he had me reset the SMC and Pram.  Nothing helped, all the ghost computers still showed in the finder.
    As a last resort he had me reset my Apple Airport Extreme.  Wala!  Ghost Computers GONE!  He said it was a combination of stuff but mainly it was the airport extreme when I installed Yosemite.  Something to do with my network.  We'll see if it holds or if the problem comes back but as of now there's no more ghost computers in the sharing part of the finder.
    Thanks to all who offered suggestions.  I hope maybe this helps someone else.
    Allen

  • Can not boot from Mac OS X Install Disc 1, G5, Snow Leopard

    I have version 10.6.8 installed. Compter is a 2 x 2.66 GHz Dual-Core Intel Xeon. 6GB memory
    I want to run Disk Utility and startup from the install CD that came with the computer (the grey one, disc 1, or even the retail disc Mac OS X Snow leopard, the whit one) but I CAN NOT DO IT. So frustrating.
    I restart, hold down the "C" key, before the chime, after the chime, every which way, and my Mac always acts as if I am simply restarting, goes right to the login screen everytime. I tried holding down OPTION on restart to choose which to startup from, but only saw the hard drive as an option. I open System Preferences, Startup Disk and the install CD does not even show up as a choice to start from, yet the install CD shows up in the finder.
    What am I doing wrong?
    Thanks

    OK.
    According to  the knowledge base that model should have shipped with Tiger, 10.4.7.
    Going to need some thought here, though. I was going to suggest a possible problem with the optical drive, but you say the DVD mounts on the desktop as a normal DVD would?
    Nevertheless, do you have access to another Mac or an external HD with a bootable OS X on it (later than the Tiger version your Mac Pro shipped with)?
    If so, try booting from the external, or from the other Mac using Firewire Target Disk mode, and using DU from one of those sources to repair the MP's internal HD, then try the disc(s) again.

  • How can i reboot my mac book air

    How i can reboot my mac book air

    Could you provide more information, please? Is the computer frozen? Do you not know where the Power button is located? Is the computer running but you just need to reboot?

Maybe you are looking for

  • IPad Photo Transfer: Windows Vista Digital Still Camera Driver Failed

    Hi, I am trying to transfer photos from my iPad to my laptop. When I plug it in to the laptop the Apple Mobile Device USB Driver installs successfully and the Digital Still Camera driver fails. I have previously transferred photos in this way without

  • Get position of xml-tag in clob

    Hi, Is it possible to get the offset in a clob, representing an xml, by using xml functionality? (function or xmltable) For example, with a clob:   v_clob := '<a><b  type="1">val1</b><b type="2">val2</b></a>';I would like a function like:   v_offset

  • Mandatory field set up for Profitable segment entry

    Dear All, Is there any way to set up Customer as mandatory field in profitable segment while manually posting  to GL for which Profitable segment is required. Thanks, Ram

  • Blob field using cmp

    Hi , I need to retrieve the blob data stored in oracle 9i database. I am using studio 5 to create a CMP using which the blob field gets mapped to java.io.Serializable class. Oracle thin driver is used and an image of size 1 kb is stored in the table.

  • Passing context data back to Java Webdynpro

    Hi All, I have created Java Webdynpro's with Adobe Interactive Forms in them. I use ActiveX not Native. Yesterday passing data from the AIF to Webdynpro for Java was working like this (it didn't work in Native mode) today it doesn't. Neither does pre