I can not conect to my TV using HDMI ports.

?i can not conect my touchsmart 600 to my TV using HDMI ports. Do anyone knows how to fix the problem?

HP TouchSmart 600 refers to over 200 different computer models.
When requesting assistance, please provide the complete model name and product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the back or bottom of your computer. Please do not include your serial number. Please enter the model/product information into HP's Online Consumer Support page and post it here for our review.
Most HP TouchSmart computers do not have HDMI inputs or outputs. Typically, the few that have an HDMI port have an HDMI input for video player or game console input. You may need to purchse and use a USB-to-video adapter such as the EVGA UV Plus+ UV39 (or any of the many other adapters on the market) to connect an external display to your computer. I personally use and recommend the EVGA UV Plus+ UV39.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Similar Messages

  • Hi my phone is disabled and asking me to conect to itunes but when i conect to itunes it says can not conect as u have to type code first on ipone ....help pls

    hi my phone is disabled and asking me to conect to itunes but when i conect to itunes it says can not conect as u have to type code first on ipone ....help pls

    If the phone is actually working you can reset it fron the handset, but yours does not appear to be working. Be sure you are using a good cable and the cable is connected directly to a USB port on the computer (not a hub). Follow the instructions carefully in that link; the computer will not recognize the phone until it is in Recovery mode, and it's complicated to get it there. If you have followed the instructions exactly and it still is not recognized in iTunes. try removing and reinstalling iTunes: http://support.apple.com/kb/HT1925. If that still fails try a different computer, and also try restoring from DFU mode (Google is your friend).

  • "all my music is unchecked.  I can not check whole playlists by using the top checkmark to select all.  I went to all my playlists, same thing.  I can only press them ONE at a time, which will take about a day to check all of them." Please help.Windows7

    "While in MY MUSIC on itunes, all my music is unchecked.  I can not check whole playlists by using the top checkmark to select all.  I went to all my playlists, same thing.  I can only press them ONE at a time, which will take about a day to check all of them.
    any ideas?  anyone have same problem?  This just happened since last update." I have windows7

    Thanks A Lot! I should have clicked: "This solved my question" But Thanks all the same!

  • Since loading the latest version of firefox i can no longer print. instead a message comes up "can not load library 'DLBAPRP.DLL' using defaults, error 126. what happened?

    error 126 can not load library "DLBAPRP.DLL" using defaults. this message appears when we try to print from our web bookmarks or any acrobat or pdf files

    That error seems to be new with Firefox 4 - never heard of it with earlier versions of Firefox, but it goes back many years in various Windows programs.
    See this [http://www.google.com/search?client=ubuntu&channel=fs&q=DLBAPRP.Dll&ie=utf-8&oe=utf-8 search].

  • HT2188 I can hear caller but they can not hear me except when using speaker phone

    I can hear caller but they can not hear me except when using speaker phone

    First of all,  make sure that your iPhone as the most recent iOS available. Check in "Settings>General>Software Update".
    One other problem could be your microphone. Does it work for anything else other than a call?
    Good-Luck!
    kpower28
    Please mark this as "solved my problem" or "helped me"!

  • My phone tells me I have up dates through the Aps store when I try to down load it it tells me can not conect to the apepstore

    The app stor tells me I have a message when I down load it tells me it can not conect?

    Thats weird.  I've seen situations where due to a wi-fi network being proxied, it doesn't work since it doesn't know how to deal with opoxy credentials...is it all updates that fail, selected updates or the entire app store? 

  • I can not sign in to FaceTime using my apple id

    I can not sign in to FaceTime using my @mac.com apple id, each time i try encounter the following message:
    The server encountered an error processing registration. Please try later. This has been an ongoing issue for several days.
    I am also unable to access Facetime preferences
    any suggestions for a fix please?

    I was having this problem and was able to fix it by going to system preferences and adding my @me email address as an additional apple id - then I signed on to facetime using that sign on info and it worked.  Good luck.as

  • I just downloaded the latest OS upgrade and since I can not connect to the internet using my cellular data plan.

    I just downloaded the latest iOS.7 upgrade on my ipad2, and since I can not connect to the internet using my cellular data plan.  I have checked my data plan and it's both current and over 2GB remaining.  However the indicator shows no service, thus would be the best steps to recover.  Thanks much for any support that can be provided.

    Hello Kmart2@3
    Check out the troubleshooting article below to get cellular to start working again. 
    iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection
    http://support.apple.com/kb/TS4249
    Regards,
    -Norm G.

  • I have an ipod shuffle 1st generation it will work if i connect it to my usb port in car or on computer but i can not get it to work using just headphones what coud be the reason for this

    I have an ipod shuffle 1st generation. it will work ousing usb port in car or on computer but i can not get it to play using headphones. what would be the reason for this.

    Sorry for  the typos, I hope my message still gets across!

  • Can not see TC hard driver using istat pro or activity monitor

    I upgraded the firmware of TC to 7.4.1 yesterday, but I found the transfer speed was too slow and I noticed that I can not see the TC condition using istat pro or activity monitor. So I downgraded the firmware to 7.3.2. Now the transfer speed is fine but I still can not see the TC hard driver in the istat pro or activity monitor.(but I can access files in the TC hard driver normally)
    Can anyone help?

    I couldn't see my TC hard drive in iStat pro until I actually mounted the TC's Airport Disk using the Finder 'Connect to server' dialog. iStat Pro only gives me Used and Free GB for my Airport Disk. My TC is an old 500GB upgraded to 1TB running 7.4.2 firmware.
    As to checking the temperature, I'd be interested too. I have a digital thermometer taped to the top surface of the TC and it is reading 46C with an ambient of 17C. The TC sits on top of a cupboard with clear space around, and I am resting it on a spacer which lifts it 12mm clear of the cupboard to give it the best ventilation. The TC has been doing a long (08:00 - 21:00) Time Machine backup today.
    Sayling

  • Can not run the test form using servlet (patch 8)

    Installed 9I AS 1.0.2.2.1 and forms patch 8 on Windows 2000.
    Configured the Forms Listener Servlet by following the white paper "Forms 6i Patch 8: Oracle Forms Listener Servlet for Deployment of Forms on the Internet".
    I can get the page titled Forms 6i Listener Servlet using URL: http://myserver/servlet/oracle.forms.servlet.ListenerServlet.
    However, I can not run the test form using the servlet by the url:
    http://myserver/servlet/f60servlet?config=servlet. In the formsweb.cfg file I also added a section
    [servlet]
    serverURL=/servlet/oracle.forms/servlet.ListenerServlet
    No meaningful error message. At first it seems very slow, and then shows the "The page can not be displayed" page.
    Please advise.
    Thanks.

    u must add "Script Alias ifcgi60 "$ORACLE_HOME/forms60/cgi" in confirguration.

  • Can not start the cluster database using srvctl

    Created a RAC database with CRS.
    When i start the cluster database with srvctl, it appears that the database is started (i made sure using srvctl status), but when i try to login to the database using sqlplus, i get a message 'connected to idle instance'. if i try to start the database from sqlplus, i get message 'requested INSTANCE_NUMBER is busy!.
    any thoughts why i can not connect to the database using sqlplus after i start the database using srvctl?
    I stop the database using srvctl and started using traditional sqlplus, it will start with out any problem.
    what am i missing?

    check ur oracle_sid,also try to connect as sqlplus sys/****@prod as sysdba
    may be this is due to improper setting of init.ora file.
    and post ur sqlplus output here.
    Thanks
    Kuljeet Pal Singh

  • My wifi is ok but i can not conect itunes store with my icloud ID

    I don't have any problem with wifi and i can conect other web sight,unfortunately just have difficulty with conection itunes store by my icloud ID.
    It say: we couldn't complet your itunes store request ,on my pc,and say you can not conect itunes store,on my phone.

    Chrisj4203, thank you for your kind answer.
    I have done a lot of restores to the Iphone, and resets also.
    I;ve done holding both buttons as you sugested, but there is no signal appearing.
    I am in Uruguay, South America and the original company is Movistar ( Telefonica) and the new sim card is from ANTEL ( the officail and biggest company in my country).
    I don;t knoe what todo.
    I have been trying for more than one mont.
    I have gone several times to both companies. Aldo two times to Apple uruguay, and nobody can help me.

  • Can not remember the ID I used starting to use my Iphone

    Can not remember the id I used when I first started my Iphone. So now, after the latest update, I can not get it started again. The information I use for ITunes is not accepted... Please help.. Have tried those "forgot my id or password".... Does not help..

    Hey there Lizamaaron,
    It sounds like you would like some assistance in finding an Apple ID you do not remember. You may be able to use the following site to help you with that:
    https://iforgot.apple.com/appleid
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Can not conect with site

    This is my very first time in this forum, I am new to
    dreamwear, and I am encounter that for the last three weeks i can
    not conect with my site to upload some material.
    when i try i recive this first notice "host, found.
    connecting"; them this one "waiting for server" and finaly this
    "and FPT error ocurrer, cannot make connection with host".
    I checke my address, login name and password and they are ok.
    can some body give me and idea what could be wrong.
    thank you in advance
    Text

    http://www.macromedia.com/cfusion/knowledgebase/index.cfm?id=tn_14834
    http://www.macromedia.com/cfusion/knowledgebase/index.cfm?id=tn_19012
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "oeh316" <[email protected]> wrote in
    message
    news:fm3e5l$n6q$[email protected]..
    > This is my very first time in this forum, I am new to
    dreamwear, and I am
    > encounter that for the last three weeks i can not conect
    with my site to
    > upload
    > some material.
    > when i try i recive this first notice "host, found.
    connecting"; them this
    > one
    > "waiting for server" and finaly this "and FPT error
    ocurrer, cannot make
    > connection with host".
    > I checke my address, login name and password and they
    are ok.
    > can some body give me and idea what could be wrong.
    > thank you in advance
    Text
    >

Maybe you are looking for

  • Creating a View at Database level to be used in an another application

    Posted - 01/20/2012 : 11:43:27 I have a table Named Customer_Distribution in which we store all the recepient information based on a request submitted by the customer. Maximum number of recepients for a request is 3.So if a customer submits a request

  • Can I print a document formatted for a smaller page size on larger paper?

    I have a document that is formatted for a small size for a booklet using a customer paper size setup, 21 x 24 cm. I want to print this on A4 paper for proofreading. But when I do so, the printer (a Brother laser printer) spits out giant pages enlarge

  • Illustrator is Shrinking JPG when Imported from Photoshop

    I just recently started working on a MAC (have been a PC user for years) and I have never had this problem with the DPI/PPI.  Not sure if it may be a Mac issue, a CC issue or user error on my part. I create an image in photoshop ie 1900x600 300PPI, n

  • Network specs in json file?

    Hi all, Is there a way to specify the network config (mgt, hdfs, mapreduce) for a new cluster in the json file? It is possible as parameters in the cluster create command I think, but I would like to keep it in the json file. Is there a full/complete

  • Strange happenings on Yosemite

    I have a MacBook Pro (Retina, 13 inch, early 2013, 8 GB, 256GB)  Running Yosemite 10.10 I noticed that every now and then the laptop seems to "go to sleep" or simply stop responding for sometimes several seconds up to about 20 seconds), and now just