I can not connect to my Time Capsule, rescaning for the device does not work.

I used extra Len Cable to connect to my MacBook but still it can not find the Time Capsule.
What are my other options to try reconect the Time Capsule again?

Hard reset did the trick.
I was able to finally see my Time Capsule after few minutes.

Similar Messages

Hello. My mac can't connect to my time capsule. There is no response and I can't put it back to the originals definitions because all my files are there and I can´t loose them. (sorry about my bad english, but I really need help!)

Hello. My mac can't connect to my time capsule. There is no response and I can't put it back to the originals definitions because all my files are there and I can´t loose them. (sorry about my bad english, but I really need help!)

Your files are unaffected by a reset.. no reset via the reset button on the TC harms, deletes or does anything to your files.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Here is how to do a fully manual setup for TC which is sometimes necessary with Mavericks in particular.
Airport Utility shows "unexpected error - please try again" when connecting to Time Capsule

Upgraded MobileMe to iCloud and now can't connect to my Time Capsule at home with Back to My Mac

I upgraded my MobileMe account to iCloud yesterday and now I can't connect to my Time Capsule when I am away from my home network. I had been able to using Back to My Mac with my MobileMe account. Now the airport utility still only shows a mobileme option in the advanced settings. Is there an update for the time capsule so that I can input my iCloud information?

Apparently this isn't possible. This was never discussed publicly before the iCloud launch. All that was said was Back to my Mac would continue working. I looked everywhere and couldn't find anything, even after the iCloud launch. Made the switch, my AirPort started yelling at me because of MobileMe credentials. I've been waiting for an AirPort update but have still been digging. Just found this:
http://support.apple.com/kb/HT4867
Talk about a footnote. This should have its own article, not be like, "Oh everything will still work great! ... ... ...
Except for AirPort disk sharing."
I'm not too happy about this.

You must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

you must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

I tried to answer in your other post.. please stick to one thread ..
What method of internet do you have.. is this fibre install.. if so the TC should just plug in and use dhcp in router mode.. press and hold the reset and it will go back to router mode by default.

My iPad 2 will not connect to my Time Capsule

My iPad 2 will not connect to my Time Capsule. Both my Macbook and iPhone4 are connected. It finds the Wifi network, but will not log on. Any idea why?

this worked fine up until last night, then all of a sudden its kicking just my iphone off the network. i am going to try to connect to other wifi's to see if i should do one of the following
back up > full restore
bring the phone back something went wrong with my phone

Can I connect and use Time Capsule with two printers?

Can I connect and use Time Capsule with two printers?

Sure, if the printers connect using the Ethernet port, you have 3 ports on the Time Capsule.
If the printers connect using wireless only, the Time Capsule will support up to 50 connections.
If your printers connect using USB, then you will need a powered USB hub. Something like this, for example:
Dynex 4Port USB 2.0 Hub DX-THUB16 - Best Buy

Yesterday I reset my settings on my iphone 4 to correct another problem. Today I am unable to connect to itunes to sync my phone. The device does not show up on the screen. What can I do?

Yesterday I reset my settings on my iphone 4 to correct a problem. Today I am unable to connect to itunes to sync my phone. The device does not show up on the screen. What can I do?

Best practices says plug the USB cable into the computer, then plug the 30 pin connector into the iPhone.
If everything is working correctly, you should be able to plug the iPhone in at any time. Before or after opening iTunes.
Depending on what settings are selected in iTunes, the program may or may not automatically open when you connect the device.

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light.

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light. Can anyone who has made this change offer some advice?

apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

I am running Lion 10.7.2 and I have an external drive hooked to my time machine. I can't rename folders and when trying, I get an error code 8076. The checkbox "ignore permissions for this device" does not show on volume info. Help please???

I am running Lion 10.7.2 and I have an external drive hooked to my time machine. I can't rename folders and when trying, I get an error code 8076. The checkbox "ignore permissions for this device" does not show on volume info. Help please???

The TIme Machine volume does not have that checkbox.
I think the issue is with your Finder...
Go to Finder "Go" menu hold the option key and choose Library. Then go to Preferences trash these files:
com.apple.finder.plist
com.apple.sidebarlists.plist
Then, restart, or log out and in again.
(You will have to reset a few finder prefs the way you like them.)

I can't synch my iPhone with iTunes because the device does not show up in a device window when I plug it in...it's missing in action and thus I'm not able to add any content from the iTunes to my iPhone, e.g. podcasts

I can't synch my iPhone with iTunes because the device does not show up in a device window when I plug it in...it's missing in action and thus I'm not able to add any content from the iTunes to my iPhone, e.g. podcasts. All the instructions on synching start with "find your device in the device window". But what if you have no device window?

Missing "message" from above: The iPad "DGMTR" is synced with another iTunes library on DGMTR's MacBook Pro. Do you want to erase this iPad and sync with this iTunes library? An iPad can be synched with only one iTunes library at a time. Erasing and syncing replaces the contents of this iTunes library.
I thought the libraries were the same.

What can I do when in Photoshop Elements (version 11) the organizer does not start up??

!@@

Yes, thanks a lot. I understand now.
I now am able to open the old catalog again!! I tried now several times with the new shortcut.
Thank you very much indeed for ALL YOUR EFFORT and patients with me.
You suggest now I should click on the repair button. When I do so, the catalog will be overwritten, or I can choose not to overwrite and than the catalog will be twice as big. So I decided not to click on the repair button. When I see afterwards that some functions do not work anymore, I allways can use the repair button. As far as I can see now nothing is lost.. )
As far as I understood it is only possible to repair with a backup. Happily I made that allways, but I am afraid to use it, for the reason above.
When I have more time to spare, I will look for all the foto's from the apps of my cellphone and delete them.
Now I can finish my fotowork, what I had started before, and make Photoshop Elements again the main fotoprogram on my desktop.
Thank you again! Trees
Van: Little_Pale_Face
Verzonden: woensdag 1 april 2015 21:53
Aan: Trees kaizer
Onderwerp: What can I do when in Photoshop Elements (version 11) the organizer does not start up??
What can I do when in Photoshop Elements (version 11) the organizer does not start up??
created by Little_Pale_Face <https://forums.adobe.com/people/Little_Pale_Face> in Photoshop Elements - View the full discussion <https://forums.adobe.com/message/7396555#7396555>

When I try to sync my iPod iCal with my MBP iCal via WiFi I get a message saying "Safari Downloading Safe Browsing Data" but I am connected to a local network and thus the syncing does not complete"

When I try to sync my iPod iCal with my MBP (OS 10.7) iCal via iTunes and WiFi I get a message saying "Safari Downloading Safe Browsing Data" but I am connected to a local network and thus the syncing does not complete because the downloading never completes because I am not connected to the internet.
Why does syncing iCal need Safari Safe Browsing Data? How can I turn this off?

See:
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
"Safari Downloading Safe Browsing Data" is just some data that is synce with the computer. To turn off on the Mac go to System Preferencs>iCloud and turn off Safari

I've plugged in my Ipod shuffle and the device does not appear in Itunes. How can I see or update the music on it?

I've plugged my Shuffle into my MacBook Pro and Itunes did not pop up. I opened Itunesmyself, yet the device was not showing and I had no 'device' tab in the top right corner next to 'Itunes store' tab. Therefore how can I update the musci on this shuffle or see what the problem is? Thanks

Hi Swill79,
Thanks for visiting Apple Support Communities.
You may find the tips in this article helpful for troubleshooting your iPod connection:
iPod not recognized in iTunes and Mac desktop
http://support.apple.com/kb/ts1410
Best,
Jeremy

HT201441 where and how can i find his id to contact him if the device is not activated and idon't know how to riech him

where and how can i find his id to contact him if the device is not activated and idon't know how to riech him

i will have to agree with hasscoo90. we badly need help how to contact the owner of this phone. we do understand the purpose of activation lock. and this is why instead asking Apple or any other company that offers a service (if there is any) to remove the activation lock for us, help us provide any contact information of the owner of this serial number we have and we will inform them of exactly what to do so that we can already use this iphone.
please help us. we really badly need your help.

What can I do for the following situation: I think my insert slot for the headphones does not work; when I put in any cable that should and can go in all I hear is low frequent static sounds.

What can I do for the following situation: I think my insert slot for the headphones does not work; when I put in any cable that should and can go in all I hear is low frequent static sounds.

You might try talking to the Apple store manager and see if you don't get more help...you might also contact Apple.com/support and see if they can give you a contact with the Apple Italy offices.
Sounds like you have two levels of failure, the first shop that did the repair and broke a wire, and the second that has disabled something else and isn't helping.
Apple officially refurbished equipment is usually good quality. Surprising this has happened but you need to press on with complaints and try for resolution.

I can not connect to my Time Capsule, rescaning for the device does not work.

Similar Messages

Maybe you are looking for