I can not define another staticDC if the primary DC has been fallen by Set-ExchangeServer

Hi
We have 2 DC, 1 for every site, the replication has been modified to occur every hour for bandwith limitations, the Exchange environment has 4 servers, 2 CAS 2 MailBox in DAG.
We had to define an static DC and GC and ConfigurationDC statically in every Exchange server (the DC in the same Exchange's site), because we note that for an strange reason, the Exchange servers use the other DC out of the site.
The point is: If the only DC that We defined statically could fail, How can we change the 4 Exchange servers to use the other DC out of the site to mantain working the Mail System?
We made some tests and when I disconnect the DC in the same Exchange's site, and I try to open the EMS to run Set-ExchangeServer, never appear the prompt to put the command.
I tried in another server where the EMS was already opened, I ran the Set-ExchangeServer cmdlet and also never accept the comando.
The 4 Exchange servers have both DCs in their DNS of their NICs.
Is there a way to switch the 4 servers to use the remaining DC? may be by registry or some thing else like ASDIEdit....
Or
Is there a way to define a strict order of use of the domain controllers?, because even if I define both DC in order by Set-ExchangeServer, they take any of the DC, so this is the reason of this question.
Thans in advanced.
Doc MX

Yes Ed, that's correct, we most avoid assigning DCs statically, but in some situations it's neccesary... So I found a workaround:
http://www.c7solutions.com/2012/05/starting-exchange-when-you-have-active-html
Not neccesary create the "MinUserDC" in profiles (only for Exchange 2013)
Doc MX

Similar Messages

Ipod can not be synched even after the "Reset Utility" has been run

Mt second generation ipod was working fine for about two weeks and then it just stopped working. It won't charge, it won't synch, nothing. I ran the Reset Utility software downloaded from the Apple website and I get this error message "the ipod "name" cannot be synched. The disk could not be read or written to".
What can I do to remedy this problem?
Brian

Hey Brian,
Did you use the newly released iPod Reset Utility? This article: http://docs.info.apple.com/article.html?artnum=305204 will telll you about the Reset utilities and has a download link.
Jason

Can you track a form if the file name has been changed after distribution?

I created a form in Adobe Acrobat X Pro -- I then used the distribute feature and sent the form to myself using the internal server. After testing the form, and making sure all was good, I copied the attachment from the email I received when I distributed the form to myself, and sent it to my boss (via outlook). He then changed the file name, and sent the form out to our members. Our members are completing this newly-changed document instead of the original form. They are able to "Submit The Form", and it still looks as though its coming back to me via the dialogue box. However, I have no received any responses in my original document's tracking. When I tried submitting this new form myself to see what happened, I just received an message that says "Your response is being queued for submission", but it never tells you whether the form was actually submitted or not. Is there any way that you can track this form even though the file name has been changed? And if people are submitting their forms to me, where are they going?
Please help!
thanks,
desiree

I understand that you don't want to redo all the linking with the markers. You can try following (make a copy of your project first to be safe) :
- close your project and quit DVDSP
- move your old asset, and replace it with the new one
- reopen your project
A warning message should tell you that this asset has changed, but your marker will remain at old position. If the asset length are not the same, old length information will be used by DVDSP. To correct this, delete the asset from the timeline, and drop it back to the timeline.
Now you just have to move the marker to the right position.

Can not change my desk top theme pin wheel has been loading for 4 weeks whats going on?

can not change my desk top theme pin wheel has been loading for 4 weeks whats going on?It says loading image.. how can i fix this..

Restart your machine.. then repair permissions..

Can you confirm to me that the Books section has been discontinued in the latest release?

I don't think I saw any advance documentation about this.

Limnos
Until the latest update of iTunes, management from Mac to iPad was through iTunes.
Messy, and if taken away completely, then fine. Makes sense. I advised the same.
So now tell me how i can see the same draft book (ie not yet published, I am writiing one) that has successfully loaded into iBooks on the Mac over to iBooks on the iPad?
Reason: snce most people read books on tablets, not PC/Macs, and as writer/publisher I need to see it on the iPad too before publishing it. Or is, as seems to be the case here also, Apple is reducing product functionality - or has it "dropped the ball" again?
Thanks

I can not download my newspaper, since my other iPad has been stolen, please contact me!

Since day's I can not download my newspaper, please let me know what I van do? An Apple support senior managers tried to help, nut I have still the same problem. I speak Dutch.

iTunes Store: Purchasing and managing auto-renewing subscriptions
Annie from Belgium wrote:
Since day's I can not download my newspaper, .
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Safari keep open page from cache, though the origin page has been available

This is weird. Safari keep opening a site with this error message:
501 Method Not Implemented
Method Not Implemented
GET to /indexfr.php not supported.
But when i'm opening the site with Firefox or Opera, the website displayed correctly. Even when i'm using curl/wget from Terminal, all html codes are displayed correctly. I know that about 1 month ago, all browser displayed the same (firefox, safari, opera, curl) 501 method not implemented. But after the remote site has been recovered, Firefox can correctly display the web page, while safari can't. It seemed that safari keep displaying the cached page.
I've tried empty the cache (from menu) many times, tried to push SHIFTCOMMANDR, tried to delete cache folder (~/Library/Cache/Safari), and also i've upgraded my safari to Safari 3 beta. All didn't work.
IMHO, when the remote site responded with 501 HTTP response, safari keep caching 'the http response', and i don't know how to delete it. This is very annoying since i have to switch to Firefox to browse that only site.
FYI: The remote site has more than one IP addresses, maybe i got this response from one of them. So, is it possible that safari keep caching the IP Address? and not to use round-robin behaviour? But i don't think so, because when i edited /etc/hosts to manually assign that site to one of the IP address, Safari still displayed 501 error message.
So, my main question is, how to completely start over Safari just like if we buy a new computer?
Sorry for my bad english
Powerbook G4 1.3 12' Mac OS X (10.4.10)

Ok, i've tried to put a question mark at the end of the url, but still got 501 Method not implemented.
I'm sure that my ISP doesn't cache web pages. Because when i tried with curl or wget (from command line), i got full html code. It is ok to browse the site with Firefox and Opera. And when i set my http proxy to our ISP's proxy, i can browse that site !!!
Here i provide some screenshots, please click:
Firefox OK, Safari Don't
Safari Don't ok. Proxy off. and my ISP doesn't do transparent caching.
Safari Don't ok. curl is fine!
Powerbook G4 1.3 12' Mac OS X (10.4.10)
Powerbook G4 1.3 12' Mac OS X (10.4.10)

I can not eliminate ASK engine from the list. It came back by itself. Please, tel me how I can eliminate this problem. Another problem, this browser is no longer compatible with some institutions. This new version might have some problems.

'''I can not eliminate ASK engine from the list. It came back by itself. Please, tel me how I can eliminate this problem.
Another problem, this browser is no longer compatible with some institutions. .'''

Step by step, how did you arrive at seeing this agreement?

HT3387 When I use pages the languages that I mainly use are English and Hebrew. The spellchecker works for English but not with Hebrew. How can I add another language to the spellcheck?

When I use pages the languages that I mainly use are English and Hebrew. The spellchecker works for English but not with Hebrew. How can I add another language to the spellcheck?

http://m10lmac.blogspot.com/2011/06/extra-spell-checking-dictionaries-for.html

I have an iPad 2 with iOS 5.1 and iBooks version 2.1.1. I have 64GB of storage, 80% is used. iBooks is using 250MB of storage. I have a large number of PDF files in my iBooks library. At this time I can not add another book or PDF file to my library.

I have an iPad 2 with iOS 5.1 and iBooks version 2.1.1. I have 64GB of storage, 80% is used. iBooks is using 250MB of storage. I have a large number of PDF files in my iBooks library. At this time I can not add another book or PDF file to my library. When I try to move a PDF file to iBooks the system works for a while...sometimes the file appears and than disappears....sometimes the file never appears. Is ther some limit to the number of books or total storage used in IBooks? Thanks....

Hi jybravo70,
Welcome to the Apple Support Communities!
It sounds like you may be experiencing issues on your non iOS 8 devices because iOS 8 is required to set up or join a Family Sharing group.
The following information is located in the print at the bottom of the article.
Apple - iCloud - Family Sharing
Family Sharing requires a personal Apple ID signed in to iCloud and iTunes. Music, movies, TV shows, and books can be downloaded on up to 10 devices per account, five of which can be computers. iOS 8 and OS X Yosemite are required to set up or join a Family Sharing group and are recommended for full functionality. Not all content is eligible for Family Sharing.
Have a great day,
Joe

Can not edit my songs in the itunes library

Can not edit my songs in the itunes library
Windows7 64 BIT / SP1 / Self-built PC
Latest ITunes version 10.4
80GB Classic 5th GEN IPOD
      I had almost full of content on my ipod,then I upgraded from XP HOME(32) to Windows7 (64 Bit)
What I did not want to do was to spend time loading All 75GB back on the itunes Library, but decided I should restore the ipod, since it's been acting up a bit. I did not deactivate the last XP OS Computer prior to formatting the harddrive,because I thought it would not matter, since the software would be GONE.
So I downloaded another itunes/Quicktime on this new Win7 O.S., and created the same playlists I had before, then dragged each genre/main music folder into the appropriate folder in itunes.
I clicked on a few songs to change the Info, but they are all greyed out and I cannot edit anything....I never had these problems before.
How to I re-enable to EDIT the INFO again?   Thank you!
(itunes also told me I had authorized four out of five computers for this device...WHAT? There is only one computer, and my one ipod.
......BUT.......My sister has a 16GB itouch, and I put my songs on her itouch, also charged it up on my computer, since she does not have her own computer yet. Will that mess anything up?
Can she create her own User apple ID/password, then be able to edit her stuff from my computer? AUTHORIZE her itouch on my computer, or do I have to create her own playlists (because I have an 80GB, and she has a16GB, obviously, she will not get all mine on her small device) then checkmark ONLY her playlists to manage on her itouch, from my computer?
A few people told me to try this....
     I Plugged in the OL' ipod, Under the SUMMARY TAB, and under the OPTIONS TAB, I changed what I had, which was "SYNC ONLY CHECKED SONGS AND VIDEOS" [B]to MANUALLY MANAGE MUSIC AND VIDEOS"[/B]
THEN underneath that, "OPEN ITUNES WHEN IPOD IS CONNECTED", "AND MANUALLY MANAGE MUSIC WERE [U]BOTH CHECKED[/U]."
THEN - I went back into my Win Explorer Main Music folder,and under PROPERTIES, I unchecked the READ-ONLY Box, hit APPLY, then OK, then I went back into the itunes library and tried to edit a few songs, but they are all still greyed out and not editable.
I went back into the WIN EXPLORER main Music folder and checked to see if the READ-ONLY was still unchecked, but it automatically reverted back to READ ONLY.
Another question I wanted to ask was this. I have my main Music Folder on my Storage HDD. They are MP3 files, and listed as Country,Blues,Classic Rock,Reggae,etc. After I installed the WIN7 OS, I had to download itunes again/Quicktime,then dragged each main music folder into the appropriate playlist until they were all there. Since my itunes app is on my Boot Drive,and my main music folder on my Storage drive,am I wasting or adding any needless HDD space having on both HDD'S? or is this a non-issue? Thank you!

Hello All!
Well, after posting the help messages, I went diggingthrough both my itunes folder on my (C) drive, and then the Music Folder on my(F) Storage drive where I keep all my music files and then went into securityand in each line, I made FULL CONTROL, APPLY, then went back into iTunes afterplugging my ipod in and clicked on MANUALLY MANAGE TUNES.
I don't know which did it, but now I can edit the songs. To answer yourquestion, I was able to play the songs, but just couldn't edit any of themuntil now. Thanks for your Reply!

HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g can not define a custom size paper.

HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g can not define a custom size paper. I would like to have a custom size to work with a card making program.

Can you help me out?
I have an HP Officejet Pro 8600 N911a
When I try to print to a custom print size (2.75" x 6" in my case), I get the same error everyone else is reporting: "Paper detected does not match paper size or type selected. Make sure the paper size or type is correct to continue the job."
I am currently trying to print using Microsoft Word for Mac 2011 version 14.4.5, but I have the same problem with printing from Adobe Reader 9.8.5 or Preview 8.0.
I am running OS X Yosemite 10.10.
My printer's firmware is "up to date" as of 28-Aug-2014.
This is what I did:
1. Open System Preferences from the Apple menu.
2. Click on the Printers & Scanners icon.
3. Click on the + sign under the list of printers to add a printer
4. Click on IP
5. Enter my IP address in the Address field (verified as "valid and complete host name or address")
6. Ignore Protocol field (default is Line Printer Daemon - LPD)
7. Ignore Queue field (default is blank for default queue)
8. Ignore Name field (default is IP address)
9. Ignore Location field (default is blank)
10. Under the Use dropdown menu, I select "Select Software"
11. HP Deskjet 9800 is not an option.
I searched for 9800, but there is no HP printer with that number in the options.
I tried selecting "HP DeskJet 980C - Gutenprint v5.2.3" to see if that would work, but I received the same error message as above. I tried selecting other random HP printers, but so far I've had no luck.
I've been googling about for a way to manually add a printer driver to this "Select Software" list, but I've found nothing (apparently, no one else wants to do this). I did not find a driver download for the HP DeskJet 9800 for OS X Yosemite 10.10 on the Drivers & Software section of the hp.com website.
Additional details on settings for Microsoft Word for Mac 2011 version 14.4.5:
Selected File > Page Setup from menu
Under the Paper Size drop down menu, I selected manage custom size.
- Click + to add a paper size
- Enter "2.75" in width and "6 in" height in the paper size fields.
- Enter "0 in" as the User Defined Non-Printable Area for top, left, right and bottom.
- Double-clicked Untiled in the custom size list and rename the size as Receipt
- Click OK to return to the Page Setup dialog box
Under Settings: Page Attributes:
- Format for "HP Officejet Pro 8600"
- Paper size: Receipt
- Orientation: "tall/portrait"
- Scale: 100%
- Click OK
Select Format > Document and set all page margins to 0.25"
Thank you.

Is not defined in any of the schemas

i got following error in 10.1.3 while compiling , it is working fine in 10.1.2
bpel_ErrorHandlerBPEL_1.0.jar failed to deploy.
Error while loading process. The process domain encountered the following errors while loading the process "ErrorHandlerBPEL" (revision "1.0"): BPEL validation failed. BPEL source validation failed, the errors are: [Error ORABPEL-10902]: compilation failed [Description]: in "bpel.xml", XML parsing failed because "undefined part element. In WSDL at "file:/C:/SOA/OracleAS_1/bpel/domains/default/tmp/.bpel_ErrorHandlerBPEL_1.0_1abf6649ecda4aa394b3eee775c9b54f.tmp/RoutingBpel.wsdl", message part element "{http://schemas.xmlsoap.org/ws/2003/03/addressing}ReplyTo" is not defined in any of the schemas. Please make sure the spelling of the element QName is correct and the WSDL import is complete. ". [Potential fix]: n/a. . . If you have installed a patch to the server, please check that the bpelcClasspath domain property includes the patch classes.
is it required any patch ? can you pls provide information

Hi
Thanks for sugestions. My process is compiling but when I deploying appears apache errors. One of them is below. I checked and that message types are in wsdl.
[Error ORABPEL-10007]: unresolved messageType
[Description]: in line 244 of "D:\product\10.1.3.1\OracleAS_5\bpel\domains\default\tmp\.bpel_ROTelcoNewOrder_1.0_d7fdf89a9fb1b5de9f664c2e4966239a.tmp\ROTelcoNewOrder.bpel", WSDL messageType "{urn:oracle.enterprise.crm.rf.service.InstalledProduct}UpdateInstalledProductRequest.V1" of variable "InvokeUpdateIPStatus_UpdateInstalledProduct_InputVariable" is not defined in any of the WSDL files.
[Potential fix]: Make sure the WSDL messageType "{urn:oracle.enterprise.crm.rf.service.InstalledProduct}UpdateInstalledProductRequest.V1" is defined in one of the WSDLs referenced by the deployment descriptor.
Do You have any ideas. Thanks

"iTunes can not run because some of the required fields are missing. Please reinstall iTunes." What the ****?!

"iTunes can not run because some of the required fields are missing. Please reinstall iTunes." What the ****? Please help me figure this out. I already removed quicktime (as another thread suggested). I can't get in!

i get same error.
I have uninstalled and reinstalled more times than i care to count. but still i get
itunes cannot run because some of its required files are missing.

Can we call another transaction from the Userexit

Hi all,
Can we call another transaction from the Userexit?
Thanks,
Balaji

Hi
Because the statament CALL TRANSACTION triggers the end of the LUW so COMMIT WORK, so you should be sure not to insert that statament while some updating actions are been doing.
So that exit shouldn't be triggered while updating
Max

I can not define another staticDC if the primary DC has been fallen by Set-ExchangeServer

Similar Messages

Maybe you are looking for