I can not display the results of Signing onto this web site.

WHen I correctly fill this web page
connect.elanfinancialservices.com
I get directed to the following page, but screen is blank.
https://connect.elanfinancialservices.com/access/oblix/apps/webgate/bin/webgate.dll?/portal/loginSuccess.aspx.
I am apparently loged in. I spoke with Elan and they said that they thought that only IE would work.
Thanks.

You purchased a phone that was most likely reported stolen or was replaced and then illegally re-sold.
If you purchased it directly from Apple, contact the Apple Store you purchased it at. Otherwise, go back to whoever you purchased it from.

Similar Messages

My new iphone4 won't connect to the app store or iTunes. It says cannot connect to iTunes. But I logged into the game center and onto this web sit. I tryed some fixes on here but nothing has worked. Suggestions?

My new iphone4 won't connect to the app store or iTunes. It says cannot connect to iTunes. But I logged into the game center and onto this web sit. I tryed some fixes on here but nothing has worked. Suggestions?

HI again Andy,
The last message had some more stuff in between the "Hello" and "Regards" - I have no idea what happened to it. But nevermind...
I started up the Mini with the modem in one usb, and the speaker system in the other (M-Audio Sonica Theatre) - I have one of the Minis that have only 2 USB (and one FireWire) ports. The firewire has the external drive connected to it.
So far, as I"m typing this, I AM able to be online and use iTunes simultaneously. (both SaFari and iTunes respond slower than if I was using only one or the other, but they ARE actually working - in addition to having Adium running) - So I think what you suggested ( that is was something wonky was the USB hub) was a correct, yet assessment.
Would you have any reccommendations for USB hubs? The only thing that I have connected to the hub under normal circumstances that would be constantly "running" would be the RadioShark (even though the Radio soft isn't playing - the blue light on the RadioShark is always on) - and the speakers naturally. Everything else is of the occassional variety - iPod Sync Cable, Dual Layer External DVD Burner, and a "pass thu" to the USB ports on my Hard Drive Enclosure (which had been unplugged before the problem was noticed). The hub I current use is the
Kensington DomeHub USB 2.0 (7 ports) Weighted Hub 33118 http://www.amazon.com/Kensington-DomeHub-ports-Weighted-33118/dp/B0002FHENE/ref= sr16/002-4275642-8664817?ie=UTF8&s=electronics&qid=1187848108&sr=8-6
which (I thought) worked better than the "throwaway" ones I had used previously.
You think it is the hub or something connected to it that may be causing the problem?
Regardless, thank you for your time, and I hope to hear from you soon.

Strange scenario,Oracle can not display the data in mysql correctly

I use Heterogeneous Service+ODBC to achieve "oracle access mysql"(any other method?),and now i find Oracle can not display the data in mysql correctly:
-------mysql------------
mysql> create table tst(id int,name varchar(10));
Query OK, 0 rows affected (0.00 sec)
mysql> insert into tst values(1,'a');
Query OK, 1 row affected (0.00 sec)
mysql> select * from tst;
------------+
| id | name |
------------+
| 1 | a |
------------+
1 row in set (0.00 sec)
mysql> show create table tst\G
*************************** 1. row ***************************
Table: tst
Create Table: CREATE TABLE `tst` (
`id` int(11) DEFAULT NULL,
`name` varchar(10) DEFAULT NULL
) ENGINE=MyISAM DEFAULT CHARSET=utf8
1 row in set (0.00 sec)
-------------oracle ------------------
SQL> select count(*) from "tst"@mysql;
COUNT(*)
49
SQL> select * from "tst"@mysql;
id
1
SQL> desc "tst"@mysql;
Name Null? Type
id NUMBER(10)

You can make the following query on the result page:
"select * from the_table where movietitle = ? and cinema = ?"
then you set movietitle and cinema to those which the user selected. If the resultset contains more than 0 rows, that means the movie is available.
Below is the sample code, it assumes you have a connection to the database:
PreparedStatement stat = myConnection.prepareStatement("select * from the_table where movietitle = ? and cinema = ?");
stat.setString(1, usersMovieTitleSelection);
stat.setString(2, usersCinemaSelection);
ResultSet res = stat.executeQuery();
if (res.next()) {
out.print("The movie is available");
} else {
out.print("The movie is not available");
}Now just add that to your JSP page. Enjoy ! =)

I can not monitor the results of color correction made in Color

I can not monitor the results of color correction made in Color come out the Blackmagic HD exrteme 3. Since the Final
I have cut the output correctly. I made the settings in the setupproject and setings but I had no success.

IN the USER PREFERENCES part of the SETUP TAB, on the right, there should be a VIDEO OUT option...choose the one that matches your media.

Can not locate the results to a published survey

I created an online survey for a municipality and published it, now I can not locate the results which have been posted.
When it was first published, and we had submitted a few tests of the system, I was able to see the responses, who had responded and the answers.
Now I can find only the form, no responses.

Just hide the Menu Bar. Right-click on the Menu Bar and uncheck Menu Bar.
The Firefox button is there by default in Windows Vista and 7 but not Windows XP.

While Installing this error is coming This Program can not display the pag

When I Try to Install SAP B1 8.8 on Win server 2008.
I am receiving this message.
This Program can not display the page
The website is encountering Problem
There might be a typing error in the address
At the time of Installation which site we need to access.
My Internet is working.
Still i am facing this Problem please suggest me what should I do.

HI Ram ,
Internet is not required while Installation .
Go through :
Re: SAP Business Installation
Thanks
Ashish

IE can not can not display the website

start -> all Programs -> oracle Home -> Database Control - ORCL
when I click on ORCL to open the GUI
i am getting a internet error http:/localhost:1158/em
IE can not can not display the web site How can I get the GUI to open
Please advise

In version 4.2 on the controller SSLv2 is disabled by default. IE by default doesn't do SSLv3. Either enable SSLv2 on the controller or SSLv3 on the client.

Why teststand can not display the ASCII character which number up to 128?

Hello All,
        I have encountered a problem on an application for ASCII character,why teststand can not display the ASCII character which number up to 128?
       For example:an expression Local.xx=Chr(164),
       xx-->string,I can not get the correct string.
       Have any idea for this?
OS:WinXP,Teststand2012 SP1.
       Thanks a lot.
Solved!
Go to Solution.

dug9000 wrote:
[...]On Windows 7 at least, the code page setting for the operating system is located in the "Region and Language" control panel in the "Administrative" tab where it says "Language for non-Unicode programs".
Hope this helps,
-Doug
Ah, that explains why i see "European Set"....
One question, Doug: Obviously, you can select only the localization there. Is this PostScript Characters for all languages? Or is it possible to switch to something like true types, e.g. "Wingdings"? (I know, bad example, but i hope you get the point)
thanks,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Layout - This Program can not display the webpage

Hi Experts,
I am trying to create adobe forms in Webdynpro ABAP, for that I created a Webdynpro component and then view in it and created the required attributes and nodes and the pdfsource as xstring type.
When I go to Layout tab it showing "This Program can not display the webpage" and in route element container I created an element and gave as of Interactive forms but the system is not creating any interface nor going into adobe live cycle designer.
Is it the problem with the Live Cycle Designer or what exactly I have to do now.
Please help me out.
Thanks,
Praveen

Hi.,
This seems that u didnt maintained host entries.,
Click Run -> enter drivers -> goto etc folder -> double click on hosts file -> open with note pad.
there u need to enter the host entries., like .. 192.....<server_address> <tab> <domain> <tab> <host>
ask ur basis team., they will configure that..,
hope this helps u.,
reply if u need some more clarifications.,
Thanks & Regards
Kiran

JEditorPane can not display the applet contained in a html

We know that class JEditorPane can be used to display Html pages. but it has limitation. When a Html page contains Applet, it can not display the applet! Does anyone know if there's any solution for this problem?

Hi, i do the 'CREATE_TEXT', after the PO created,   the PO created correctly except the Long Text.
THE CODE:
*********************1*********************
    CALL FUNCTION 'BAPI_PRODORD_CREATE'
      EXPORTING
        orderdata    = wa_po
      IMPORTING
        return       = rt
        order_number = aufnr
        order_type   = otype.
Then i got a AUFNR,
**********************2**********************
CONCATENATE sy-mandt aufnr INTO t_name.
      CALL FUNCTION 'CREATE_TEXT'
        EXPORTING
          fid         = 'KOPF'
          flanguage   = 'E'
          fname       = t_name
          fobject     = 'AUFK'
          save_direct = 'X'
          fformat     = '*'
        TABLES
          flines      = it_text
        EXCEPTIONS
          no_init     = 1
          no_save     = 2
          OTHERS      = 3.
and SY-SUBRC is 0.
the long text also generated, but can not displayed on the CO03

IE8 can not display the radio button in B1iP

Hi,
I installed B1i and finished the configuration in B1i. But when assigning systems in B1iP, my IE8 can not display the radio button. Does anyone know how to solve it?
Dawson Lu

Hi Eddy,
Thanks a lot for your proposal.
Yes the explorer may have some wrong settings. I will check it again or reinstall it.
Best Regards,
Dawson

TS3988 I just bought a Iphone 5 -- my Iphone 4 and my ipad used to automatically sinc calendars via the Icloud whenever I entered anything on either device -- I can not get the new phone to do this.I have check the settings on both devices and they seem

I just bought a Iphone 5 -- my Iphone 4 and my ipad used to automatically sinc calendars via the Icloud whenever I entered anything on either device -- I can not get the new phone to do this.I have check the settings on both devices and they seem to be t

There are only two things that you must do to connect a device to calendars:
1) In settings>icloud, you must log in, WITH THE CORRECT ID/PASSWORD, and
2) Turn on calendars on the same page.
You said that the iphone 4 and ipad **used** to automatically sync. Do they no long sync?

I can not run the account Administrator show me this letter Please help :

I can not run the account Administrator show me this letter Please help
http://im40.gulfup.com/4AXHK.png

Hi,
You need the administrator permission to enable the built-in administrator account.
For secure concern, there is no other way to do this.
Alex Zhao
TechNet Community Support

In Premiere I can edit an avi or mov clip but I can not save the result as a like file. Why not???

In Premiere I can edit an avi or mov clip but I can not save tghe result as a like file. What do I have to do??? It only saves a project. Under 'File' the 'Export' function is greyed out. I need help baddly.
[email protected]
Bill Schoon

Boatbuilder
Let us start from the beginning.
It has been established that you have Premiere Elements 10. On what computer operating system is it running?
There has not been a File Menu/Export/Movie export opportunitity in Premiere Elements since version 7. We are not up to version 12.
For Premiere Elements 10, your export opportunities are all in Share/ including one for Computer. Under Computer there are several choices. The ones that you see are Adobe Flash Video, MPEG, and AVCHD. The others you have to scroll down to. And those choices are AVI, Windows Media, QuickTime, Image, and Audio. You do not have to use the scroll bar for this. You can click on Adobe Flash Video panel to get it to turn black. Then use the down arrow to go down the list and the up arrow to go up the list. Once you get to a category, you can select a preset and go with it or customize it under the Advanced Button/Video Tab and Audio Tab of the preset.
If you post the properties of your source media that you want to try to match in the export, I would be glad to suggest the exact settings for you.
We will be watching for your follow up with details.
Thank you.
ATR
Add On...The Premiere Elements 10 File Menu is for more than Saving, just not exporting. One of the key features that can be access there is the Project Archiver. More on that another time.

How can i display the result of java class in InputText ?

Hi all,
How can i get the result of java class to InputText Or OutputText ???
also can every one in the forum give me road map for dealing with java in oracle adf because i'm beginner in oracle adf
i saw some samples in oracle adf corner but it's difficult for me.

User,
Always mention your JDev version, technologies used and clear usecase description (read through this announcement : https://forums.oracle.com/forums/ann.jspa?annID=56)
How can i get the result of java class to InputText Or OutputText ???Can you elaborate on your requirement? Do you mean the return value of a method in a class as output text? Or an attribute in your class (bean?) as text field?
-Arun

I can not display the results of Signing onto this web site.

Similar Messages

Maybe you are looking for