I can not enable bluetooth on Iphone 4

I can not enable bluetooth on Iphone 4. Attempt enabled in settings, bluetooth and awaits income. (not displayed tab)

qfyerko wrote:
Attempt enabled in settings, bluetooth and awaits income.
Then pay it.
What is the real issue?  Post in your native language if you have problems communicating in English.

Similar Messages

  • I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same displa

    I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same display works fine as it is surprising. or maybe someone knows what is the reason for this? is there any way to solve this problem?

    More than likely its a hardware issue, I have never encountered such a problem and best bet is to just go get it replaced. If you have insurance on your device apple will replace it as long as there was no water damage, if you dont have insurance they will charge $200 more or less. Hope you get it fixed

  • My iPhone 4s, I can not enable the wifi

    The same problem presents me with my iPhone 4, I can not enable the wifi, and the operator said that my warranty expired and I refuse to think that Apple just build these modern devices to last exactly one year, whom I am very grateful can help with this problem, I need to know who I can contact my mail [email protected]  regards

    See if this helps
    http://support.apple.com/kb/TS1559
    If doesn't, you are looking at hardware failure.

  • HT4236 I can not enable selected photos to sync to my iphone 5. It is greyed out. I do not want to sync my entire iPhoto library.. help!

    I can not enable selected photos to sync to my iphone 5. It is greyed out. I do not want to sync my entire iPhoto library.. help!

    Guys, I found another user and what he said to do worked!!! I have copied the information below:
    This was 1 of the things that happend to me too, the other one was that at the bottom of the itunes page were it says all the memory info, it marked that I had over 3gb of other memory wich I didn't.
    Anyways what I did was to unmark the calendar, contacts etc. ( so that they wont sync with the computer ), pressed apply,  then I marked all of them again, apply again and for last I pressed Sync wich is at the bottom right coner by the apply botton.
    I'm not sure that had anything to do with it but it worked, my music appeard both of my itunes playlists and the ones I bought in itunes.  Also the other memory dissapeard and it's all good.
    I'm not sure this will help you but thats my 5 cents, if the problem continues its better to call customer service and ask for a technician.
    Hope your problem gets solved. Have a nice day.

  • Can't enable bluetooth second time after 3.0 upgrade

    Since the iPhone 3.0 upgrade, I can only enable bluetooth once. If I turn bluetooth off, then attempt to turn it on again, it appears to crash and I am not able to turn on bluetooth. The only way I can enable bluetooth is to turn the phone off, then back on.

    I'm not sure what you mean by turning "automatically join networks" on.
    Under Settings->Wi-Fi, I have turned on "Ask to Join Networks," which is what I think you mean -- it says, "Known networks will be joined automatically. If no known networks are available, you will be asked before joining a new network." But even if I turn that toggle off, it still says, "Known networks will be joined automatically. If no known networks are available, you will have to manually select a network."
    The behavior I had in the past was that my iPod would reconnect to my office network when I woke it from sleep, so I feel confident it's always automatically connected in the past, and is set as it should be to do so in the future. (Even while asleep, it would occasionally alert me to new e-mail. Since it loses its connection now, it doesn't do so.) Either way, I'm confused about why attempting to manually rejoin a known network would even occasionally get me an "Unable to join network" message, when tapping "Other ..." and re-entering that same network's settings would be successful. Seems it is able to join that network, but won't do it automatically -- and occasionally won't do it unless I teach it about that network all over again.
    But there's also that "Auto-Join" toggle I've mentioned above, on the Wi-Fi Network settings page for this particular network. No matter how I try to turn that toggle on, it reverts off as soon I scroll down the page or tap the button in the top bar to return to the Wi-Fi Networks screen.
    For what it's worth, it remembers my home Wi-Fi network just fine, and connects automatically when reentering range of my router. It also reconnects when waking from sleep, and periodically while asleep as well.

  • Since updating to Firefox 3.6.15, I can no longer print coupons from SmartSource. The error message is that Java is not detected. The check box is longer showing in the Options/Content of this version of Firefox, so I can not enable it.

    # Question
    Since updating to Firefox 3.6.15, I can no longer print coupons from SmartSource. The error message is that Java is not detected. The check box is longer showing in the Options/Content of this version of Firefox, so I can not enable it.

    Same PC as I used to post the question. When I go to the "plug in check" page, it shows I am up to date and it is not disabled.
    Java(TM) Platform SE 6 U24
    Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers 1.6.0.24

  • HT1386 iPhone won't sync with iTunes. It says iTunes can not add songs to iPhone because no songs in iTunes library can be copied to iPhone. Help!!!! What should I do

    iPhone won't sync with iTunes and It says iTunes can not add songs to iPhone because no songs in iTunes library can be copied to iPhone. Help!!!! What should I do. I tried everything!
    I need to add my music to my iPhone from iTunes but its not working!

    First off try and go into your IPhone manually through My Computer and cut photos or anything you can through the device to be able to free space up so that you can continue to do what you want to do with ITunes. This way you will be able to create a backup or do what you have to do to manage your information, photos and texts on your device a little better.

  • Since I'd installed the new version of iTunes, iCal and Address book do not sync with my iPhone 3GS through iTunes anymore and I get an error message stating that iTunes can not sync with this iPhone. Was must i do to correct this issue?

    Since I'd installed the new version of iTunes, iCal and Address book do not sync with my iPhone 3GS through iTunes anymore and I get an error message stating that iTunes can not sync with this iPhone. Was must i do to correct this issue and if i must, how dI reintall iTunes without loosing my content?
    P.S. I am able to sync postcasts and music though!

    http://support.apple.com/kb/TS3694
    http://support.apple.com/kb/TS3125
    http://support.microsoft.com/kb/299357

  • Can not enable fonts for User library in Font Book

    Hi all,
    For some reason I can not enable the user library in the font book using the options in the font book. This means that the User Library is "off". I have tried the following but none of them have worked:
    * Reboot.
    * Delete the Font preferance file.
    * Undo the font book via booting in safe mode and then rebooting in normal mode. Delete the trash which contains the font cache.
    * Manually insert fonts into User>Library>Fonts and restart.
    * Manually empty user fonts folder and re-insert fonts back in.
    * Delete the user fonts folder and re-create it and insert all fonts back in
    Have also tried a few combinations of the above but none of them have worked. I do not want to use the system library fonts folder as this machine is on a network and the users should not have admin rights to their machines.
    I have also checked the user rights to the user fonts folder and all seems ok there.
    Does anyone know how to solve this problem so that I can enable the User font library?
    Any help would be much appreciated.
    Thanks
    Slack

    I have found that for me, on both a PowerMac G5 and an Intel iMac, both running 10.4.8 with all updates, turning on FileVault reliably causes the problem. I.E., if FontBook is working fine on an account which does not have FileVault turned on and I turn on FileVault, then the User collection in FontBook is greyed out and Enable "User" doesn't work. If FileVault is on, none of the suggested work-arounds that I have read about in these discussions or in Apple's support articles help.
    Sometimes, turning off FileVault is sufficient. Other times, I must turn off FileVault and follow the work-around in http://docs.info.apple.com/article.html?artnum=302551 . Sometimes, I must turn off FileVault, throw away the FontBook preferences and restart.

  • I forgot my own identity and password and I can not I use my iphone 5c

    I forgot my own identity and password and I can not I use my iphone 5c

    Activation Lock in iOS 7  >  http://support.apple.com/kb/HT5818
    The Apple ID and Password that was Originally used to Activate the iDevice is required.
    mohamed.reda.nasr wrote:
    I forgot my own identity and password and I can not I use my iphone 5c
    1)   iForgot
    2)   Find your Apple ID

  • HT1369 with the last update I can not longer connect my iphones to iTunes - Is there an update to fix this?

    with the last update I can not longer connect my iphones to iTunes - Is there an update to fix this?

    Hello wendellfromva,
    The following article provides tips that can help get your iPhone to reappear in iTunes.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Allen

  • AFter upgrade, iPhone says tv show (HD) can not play on this iPhone

    AFter upgrade, iPhone says tv show (HD) can not play on this iPhone . It is the SNL HD TV SHow will ferrel episode. DOwnloaded from iTunes.

    when you bought it, did 2 versions download? For a bunch of shows I bought recently, I got 2 versions - a HD version and a standard (SD) version. To make room, I moved the files off my computer. When I wanted to watch the individual episodes on my iphone, I'd move the SD version back to the computer, and sync it with the iphone. After the recent upgrades - snow leopard, itunes 9, iphone 3.1, something got broken. When I would transfer the SD versions to my computer to sync with the iphone, for some reason something would rename the files with a (HD) tag at the end of the file name (even though they were the SD versions). Removing that tag in finder was all I needed to do to make it work. Odd.

  • HT4910 I can not back up my iPhone.  it says I need more storage space.  I purchased more space and icloud says it is there, but the phone is not recognizing this and continues to say that I need to purchase more space in order to back it up.  Any ideas?

    I can not back up my iPhone.  It says I need more storage space.  I purchased more space and icloud says it is there, but the phone is not recognizing this and continues to say that I need to purchase more space in order to back it up.  Any ideas?

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • I can not open safari because iphone is not conneted to the internet

    i can not open safari because iphone is not conneted to the internet. i need to know what to do to make it work

    Settings App > General > Reset > Reset Network Settings. Settings App > General > Cellular > make sure Cellular Data is turned ON to connect to Carrier. Or Settings App > WiFi > Log into WiFi to so you can get internet connection.

  • I can not activate my verizon iphone 4, i restored to factory settings because my iphone wouldnt update to ios6 after trying three times and now that i restored it its saying that it cant activate my phone, please help

    i can not activate my verizon iphone 4, i restored to factory settings because my iphone wouldnt update to ios6 after trying three times and now that i restored it its saying that it cant activate my phone, please help

    This is a Windows error. See this support document for help. iOS: Unknown error containing '0xE' when connecting to a Windows PC

Maybe you are looking for

  • CUP unable to provision FF id in ABAP system

    Dear Experts, I have integrated SPM in CUP for Superuser Access Provisioning. Here while testing as requester I am able to create a request by Superuser Access and selecting all necessary field like system, Manager Firefighter id and after submit req

  • Globally set "float" for my windows... and Skins?

    I really liked how PS would allow me to open up any .psd etc, in it's own floating window, so I could select then drag an image from one doc to the other. Cant do that with the default settings in CS5...but I've found a way to 'force' that for each d

  • Sending Early Watch Alert Report through Email

    Hi All, For sending the Early Watch Alert Report through Email, I have completed the configuration. After adding the desired Email Address in Path Solution_manager-->goto-- > Automatic Email Transmission, do i need to create a Zjob in SCOT T-code or

  • Is "Audible firmware" (2.20.05) SA

    Hi, im posting this thread cause im not sure if i need to install the new firmware that was given in some other post that i didnt understand, the orginal file was token from here: http://www.audible.com/adbl/store/mu...okie=Yes#micro, press " Creativ

  • HT1657 I rented a movie on my iPad, where do I find it?

    I rented a movie on my iPad.  Where can I find it to watch it?