I can not end call

I can not end call, call drops during conversation, phone freeze by it self

I have got two, both of them has same problems

Similar Messages

  • RE CAN'T END CALL IN LUMIA 800

    i can't end call in lumia 800 and battery is also not getting full charged ..........pls help

    @himanshuonly4u
    Whilst the latter issue is addressed in soon to be released 1600.2483.8107.11501 the former has only so far produced the response "reset" your device or renew SIM which seems rather fallacious, as Lumia 800 one of the first devices bar iPhone to utilise microSIM and neither of which seem to address this issue if your device is so affected.
    Happy to have helped forum with a Support Ratio = 42.5

  • HT4994 I have an Iphone 4 and can not forward calls. every time I put the number in the call forward field it jumps back a page and the button moves to off. can anyone assist.

    I can not forward calls. I go to call forwarding, turn it on, copy and paste my phone number into the correct field (including the international dialling code).
    I then tap the Call Forwarding button, which takes me back one stage and the Call Forwarding button goes to off after a couple of seconds. Anyone who can help?

    Yes, a blocked call will go immediately to your voice mail.
    If you would rather not have that behavior, ask your cellular carrier if you can block that person through the carrier.

  • I have problem with concoction i can not make call or sms

    I have problem with my i phone 5 i can not make call and sms do please help me

    I think you don't understand the purpose of this forum. This is a user-to-user support forum. You're not talking to Apple. You're not talking to your cellular carrier.
    One last time and then I'm done:
    You need to call your cellular carrier and get this sorted out. No one here can help you.

  • Ios5.0.1, can't receive calls, can't end call, can't take video!!!!!

    After installed ios5.0.1, can't receive calls, can't end call, can't take video!! The screen become frozen! Any help please? Thx!

    How about going to a corporate store and see if they will let you put your SIM card in a display model. Your number will transfer over with the SIM card. Then if you call your number from your wife's phone or one of store landline phones and the call goes through, you have ruled out the SIM card being the problem.
    You don't have the phone number set to automatically forward to the voicemail, do you?

  • Can't end call on iPhone

    At the end of a call my iPhone screen is dark and doesn't always pop back to the call screen so I can hit End Call. Therefore, the call continues on until it disconnects. How do I get back to that screen short of never putting the thing to sleep? Could my Marware glove cover have something to do with this?

    Your case is very likely blocking the proximity sensor. Remove the case and see if the problem goes away.

  • I cannot access my voice mails.  I can't get to voice mail either through the phone app nor the viooice mail app.  When I try I get message the "can not complete call as dialed."t  Any ideas?

    I cannot access my voice mails.  I can't get to voice mail either through the phone app nor the viooice mail app.  When I try I get message the "can not complete call as dialed."t  Any ideas?

        backpack12,
    Voicemails are a vital part of having a working phone. We do suggest that you look at the contact and then the number to make sure that it is *86. If you are needing to get your voicemails until then, please dial *86.
    RobinD_VZW
    Follow us on twitter @VZWSupport

  • I have an iPad 2 wifi 3G , living in Iran and can not make call , what i should do?

    Hello , I have an iPad 2 wifi 3G , living in Iran , and can not make call , what i should do?

    If you're trying to FaceTime, you must be connected to a wifi source and the other individual must also have wifi and FaceTime. Like Jonathan said, it can't make calls.

  • Can not make call on face time

    Can not make call on Face time. Mac book pro with mountain lion. Camera ok, face time starts fine, validates apple id ok. Showes list of contacts. when I select one nothing happens!! Face time is on, apple id is ok wi fi is fine (verified with lion macbook pro), also can not access face time preferences, it shows grey????

    try posting in macbook pro forum. or ML

  • "Hello, I bought an iphone from Japan but I can not make calls fom him, his number is 012417004140945. Please help me."

    Hello, I bought an iphone from Japan but I can not make calls fom him, his number is 012417004140945. Please help me."

    Get SIM from the carrier who sold the iPhone.
    Or Get it unlocked from them if they offer unlocking service.
    If it is from SoftBank, they don't.

  • Iphone screen is black when I remove the phone from my ear; can't end call

    This is annoying! It doesn't happen all the time -- only some of the time but at least two times a day. The phone works but it just doesn't show the "end call" option -- or anything for that matter. I can turn it off when I have my headset on but if I don't have the headset on, I have to press the lock key on the top of the phone to get it to do anything. Then it locks, and then when I touch the on button at the bottom of the phone, it shows the display again. Anyone have any ideas or should I take it in?

    Hey jps42247,
    Do you have a protective case on the iPhone? If its covering the Proximity sensor on the iPhone, the iPhone could think the phone is still being held up to your head. In that case the iPhone screen would remain locked so the call could not be ended accidentally.
    If you don't have a case on the iPhone, try resetting or restoring the iPhone.
    http://docs.info.apple.com/article.html?artnum=305743
    http://docs.info.apple.com/article.html?artnum=305744
    Jason

  • Only one problem left, can't end call

    Haven't seen this anywhere, both my wife and I can't end a call. Screen unresponsive, we have to wait untill the other caller hangs up.
    We're un-rooted with the latest updates.
    Thanx in advance

    Yep, still having the problem. This is my second fassy since September and the first one did it too. My wife is still on her first one since Christmas and hers does it as well.
    I've done all of the above including safe mode. Safe mode by the way fixed a glitch where I couldn't back out of my contacts, I had to hit the home button. My wife's did not have this problem.
    We have the exact same apps but hers has always run smoother than the two of mine, go figure.
    I will say I have played with ALL the other phones and the fassy blows them all away!
    We both have Launcher Pro free version which rocks.

  • E61i - can't end call

    I have an E61i and nothing happens when I press the end call button now. I can't hang up on calls anymore without going to the options menu.
    I have the latest version of the firmware. I have a memory card but I removed it and restarted with no effect. I used to be able to just turn my phone off and on and the problem would go away. Now it won't go away.
    Any suggestions

    If your phone warranty is still valid - get it repaired. But I suppose this is not the case... So the only thing I can think of is Hard Reset - dial *#7370# and confirm. But be aware that this will format the device - all data on the phone memory including all applications will be erased.

  • Nokia E5 - Can not hear Caller after disconnecting...

    When i disconnect the phone from the VW car kit, i can not hear a caller when they ring me, the phone does have the car symbol on the bottom status line and the only way to fix the problem is to restart the phone everytime i disconnect from my car kit....not ideal !!!
    Any ideas on why it seem sto think it still connected ?
    Regards
    mark.

    Okay! If you have the same problem, you end all runing programs in the taskbar. reset the phone several times. i can hear the caller after that. hope that the problem comes not back.
    There ist the Problem with the battery!
    Sincerley
    Alex Fromm

  • Can't end calls?

    I have an iPad mini, received it six days ago, but a couple days ago, I can no longer end call, be it phone or FaceTime, does anyone have any suggestions? All other buttons work, and they're all onscreen but pressing end call does nothing.

    Try the basics. Close the Facetime and Messages apps, and reset the iPad. No data will be lost.
    Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Hold down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple logo appears on the screen after which time you can release the buttons and let the iPad start up.
    If that didn't work, try this. Reset all settings. You will not lose any data, but most of the device settings will have to be entered in the settings app again. Settings>General>Reset>Reset all Settings.

Maybe you are looking for

  • How can i input a video into a powerpoint?

    I need to know if its possible to import a tv show into a powerpoint?

  • Create AP Payments (Check, EFT,ACH, Manual ) through API/Interface

    We create invoices in our oracle EBS R12. But as we are child unit of a larger company, they make all the payments via PeopleSoft and send us a EDI file. So now, we want to develop an inegration application using the API/Inerface to apply all the pay

  • How to create Services in ADF

    Hi , I have requirement to create independent services in ADF , which when called, independently complete the tasks of putting or fetching data from the Database., irrespective of the page defs from where it is called. For example a Look up service,

  • Creating new Domain by Copying the existing domain

    Hi, Is there any way to create a new domain by copying the already existing domain directory and pasting it to another directory in same machine or different machine. Can anyone suggest me the configuration file that needs to be updated for new domai

  • Setting Default Keyboard Language

    I just acquired an PowerBook G4 and the thing is set to always turn on with the keyboard set to French language. Once running I know how to switch between English and French settings (and we do use the French at times). I would like to have the Engli