I can not enter into the app store

HI
I can not Login the app store from my iPhone Because of my address.
I tried to change my address to my original Country
but their is this massage "you have a store credit balance; you must spend your balance before you can change store".
so i bought two applications for my mac to spend my balance but still their is .43 $ which is i can't spend it to settle my balance.
now I Transferor my .43 $ to change my address to my original address so i can Login the app store and update all apps also purchases another app as well as I was able to.
Sincerely
ALI JAAFAR

You shouls be seeing this (tap to enlarge image)

Similar Messages

  • HT204266 I can not log into the App Store, even though I am logged in to iTunes. ? Help please :)

    I can not log into the App Store, even though I am logged in to App Store and my password is entered into the settings. This appended after I accidentally switched to the British version of iTunes and I logged out and back in to get to the US. Now, I keep getting an error message that I can not log into the App Store. I have tried updating it to the computer and restarting, but still keep getting the error message. Help please! :)

    I am afraid all apps are tied to the Apple ID they are purchased with and are not transferable.
    Your son have to buy those apps with his own Apple ID and start from scratch.

  • I can not enter in the App Store using my ID!!?

    Hello
    iTunes and icloud -ok
    But open app store Sing in -
    Thanks

    May not be just your Apple ID...
    Open System Preferences > Security & Privacy then select the General tab.
    Click the lock icon. You may be prompted for your admin password.
    Now select:   Mac App Store and identified developers
    Click the lock to prevent further changes.
    Try the App Store.

  • If i factory reset my ipod touch(5th gen), can i reset it as the option 'set up as new ipod', and then i can just go into the app store/itunes store and restore my music and apps and not icloud with photos and ect?

    if i factory reset my ipod touch(5th gen), can i reset it to the option 'set up as a new ipod', and then i can just go into the app store/itunes store and log into my apple ID so i can just restore my music and apps and not icloud with photos, contacts, ect. and then later i can add contacts that i need/want instead of them restoring them from icloud?
    The reason i asked this question is because i have been wondering this a lot ever since i got an exchange on this ipod (and ive only had it for a few weeks now) because my last ipod had a lot of problems. so after i restored my ipod with my computer/itunes, i downloaded apps that i wanted, and then when i went to the storage to see how much storage was left, it said 0 bytes. i was freaking out because i didnt know how that could be, i mean, cause like, that is impossible when i just 'purchased' it, that the space was full but i looked and all my pictures were on this ipod and i already put them on my computer so i dont need them anymore thats why i wanna reset it now so there is nothing on it so i can have more space for stuff to do and download on it.
    it is updated to iOS 8 but that happened when i purchased it, so i didnt have a choice to update it even though i didnt want to update to iOS 8...
    and i hope you understand my problem..
    i would REALLY REALLY appreciate it if someone could tell me a solution to my problem!!! thank you so much!
    -sierra

    Hey Sierra, You can do just what you have stated. My question, what is your "other"? If it is over 1.5 GB you most likely have corrupt files. Doing a Restore to New, Factory restore should correct it. Just make sure you make a full backup of all information on your iPod to your computer before you restore, so you don't lose your stuff, contacts, videos, pictures, non-iTunes music, etc, use the cable and connect with your computer. Then, via cable, connect to your computer, run the Restore to new, don't use your backup. Treat this iPod as if it was your first one ever. When restore is done, set up and add what info you wish to install on this iPod. The music apps etc you purchased should be on your computer, if not you should be able to retrieve purchased apps and music from iTunes. Any music, videos, apps not purchased from iTunes will be lost to you if you do not save them to your computer or the cloud first. When your done, make a current Backup and you should good to go. Hope this helps. Good luck. Cheers.

  • Why can I not log into The app store after changing credit card information?

    Why can I not log into the App store after changing credit card information?

    DNS -
    Some folks resolve download and other connection issues by using either OpenDNS or Google Public DNS services. The best use is to use it as the DNS configuration in your modem/router/gateway device, but often the configuration in the computer or iOS device will over ride the other configuration if you don't have access.
    Open DNS;
    http://www.opendns.com
    208.67.222.222, 208.67.220.220
    Google Public DNS;
    https://developers.google.com/speed/public-dns/
    8.8.8.8, 8.8.4.4

  • I can not log onto the App Store...

    it has been going on now for over 3 weeks...I had a lightning strike and blew out the on board ethernet ports on my Macpro so I use a ethernet to usb adapter now and that works fine for everything including iTunes but I can't log into the App Store, the error is "An unknown error has occurred" I have called and they told me to go to the Genius Bar...did that and the couldn't help and called support and they told them that they would look into it and get back to within 24-48 hours and I have still haven't heard a thing!!!  This is very frustrating and I have had several cases opened up about this and nothing is working.  Does anyone have any ideas on what to do?  Thank you.
    Charlie O. 

    Guess, you only have another issue with the app store problem. Some cannot login, some are caught into a loop of password prompts...
    All is related to Macs with MacOS 10.4.7 - so again.
    There are two different solutions trials, one is to go to close all applications then navigate to /var/db/crls and delete there the files crlcache.db and ocspcache.db - reboot the system, empty trash and see if this solved the problem.
    If not, second chance is to reset the certificates, mentioned here:
    Delete the files /var/db/crls/crlcache.db and /var/db/crls/ocspcache.db. These can be found using Finder’s Go >; Go To Folder menu (Cmd + Shift + G). This resets the cache of accepted certificates in the system. It doesn’t remove them, it just forces the system to rebuild the caches upon restart.
    Open Keychain Access (/Applications/Utilities/Keychain Access). Select Certificates in the Category picker on the left side. In the search bar, type in the word Class. Look through that list, and find any certificates that have a blue + symbol over their icon. These are the ones you need to modify.
    Select one that has a blue +, and hit Command + I. Click the disclosure triangle beside the “Trust” list to show the list of permissions. Now, what we need to do is to set this certificate to use the system defaults. However, for some reason, when you select it, it doesn’t save. So what you need to do is this. Under “Trust”, where it says “Secure Sockets Layer (SSL)”, change the dropdown menu to say “No Value Specified”. Then, close the window. It will ask for your administrator permissions. Then, open the info pane for that certificate again. Under “Trust” again, now set the dropdown that says “When using this certificate:” to say “Use System Defaults”. You can then close out of the info pane, and enter your password again. Do this for any of the certificates that have a blue + on their icon. There should only be one or two at most.
    Restart your system.
    So, as you see, it start again with reseting the certificate cache and next manually working the certificates, to ensure proper system setting...
    But there are evenly people who failed with this... but you can give it a try
    If all fails - then we have to wait for a fix from apple

  • Just bought a used Oct '13 MacBook Pro and I can't sign into the App Store as it still displays the old owners user ID in the login box (in fixed grey text). Any ideas of how I what I could do? Thanks.

    Just bought a used Oct '13 MacBook Pro and I can't sign into the App Store as it still displays the old owners user ID in the login box (in fixed grey text). Any ideas of how I what I could do? Thanks.

    The first thing you should do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    1. You don't own another Mac.
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
    If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. If you don't have the media, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    2. You do own another Mac.
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. You will need the Apple ID and password that you used to upgrade. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    Once booted from the disc, the USB device, or Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
    After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
    If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
    If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it under your ID. In that case, contact iTunes Support.

  • I have an iphone 4 and recently changed my apple id password. I went through the verification successfully. For some reason, I can't sign into the app store on my iphone using my apple id and password.

    I have an iphone 4 and recently changed my apple id password. I went through the verification successfully. For some reason, I can't sign into the app store on my iphone using my apple id and password.

    Apple doesn't monitor here. Best we can do is to push you to contact Apple directly.
    This is from the iOS Dev Center forum...
    http://devimages.apple.com/maintenance/
    We apologize for the significant inconvenience that our downtime has caused and encourage you to reach out to ourhttps://developer.apple.com/contact/ if you need any assistance.
    (Check under "Program Enrollment").
    Note that your program membership should have been automatically renewed if it lapsed during the downtime period.  If not, please be explicit about that in your support request.
    --- DrErnie

  • I can not get into the iTunes store for the past two days.  I can do a search on the music in upper right corner.  However, the screen is white with "iTunes" in the middle when I do. Any suggestions?  Thank you.

    I can not get into the iTunes store for the past two days.  I can do a search on the music in upper right corner and get a drop down list.  However, the screen is then white with "iTunes" in the middle. Any suggestions?  Thank you.

    Check out this Apple article -> iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    If your computer has one of the LSPs listed you may have to reset winsock.
    If not, you may want to give this article a shot -> iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues

  • Can not connect to the app store

    Hi all,
    I hope one will be able to give me more help than the apple support team.
    I've installed the update on my two computers.
    On the IMac it is working fine in several account.
    On my MacBook Pro, the app is stuck on"Can not connect to the app store".
    I've tried the suggestions of the help menu, and from some discussions. I even reinstalled the ocmbo update.
    Nothing happens.
    If somebody has some clue?
    Thanks in advance.
    arno

    HI and welcome...
    Download and install the v10.6.6 combo update available here.
    http://support.apple.com/kb/DL1349
    Then repair permissions.
    Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. As long as you see, "Permissions Repair Complete" when it's finished... you're done.
    If you see any warnings re: SUID messages, they can be safely ignored, information here: http://support.apple.com/kb/TS1448?viewlocale=en_US

    Carolyn

  • I do not know why, but I can not go to the App Store! before I went there without any problems but now I can not connect with App Store

    I do not know why, but I can not go to the App Store! before I went there without any problems but now I can not connect with App Store

    Open the Finder. From the Finder menu bar click Finder > Go > Go to Folder
    Type or copy/paste:   ~/Library/Cookies
    Click Go then move the com.apple.appstore.plist file from the Cookies folder to the Trash.
    Try the App Store.

  • HT4061 I can not connect to the app store

    I can not connect to the app store help!

    Try this website:
    http://support.apple.com/kb/TS1368

  • I can not connect to the app store using my iphone 5

    I can not connect to the app store using my iphone 5.  When I first got it I was able to-but not since???
    Please help

    Come on guys.  Help me out.  When I click on the app store icon, it'll just go to a blank screen.  The only time there is anything on the screen is under the updates tab.  Then it just says no updates found.  I can not browse apps or search for them.  It just goes to blank screen

  • How can i ge into the app store without using a credit card?

    How do i get into the app store without using a credit card?

    Unless you can find an item in the store that costs the same as your balance then you will need to contact iTunes Support and ask them if they can remove the balance : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • I can't log into the app store

    For some reason, my iPhone 5C won't log into the App Store. I am currently running 8.3. I scroll to the bottom of the App Store to sign in, type my information in, then click sign in. The App store will go back to how it was; unchanged. It still says Sign In at the bottom. How do I fix this?

    Good day Goose253501,
    It sounds as though your iPhone is having some difficulty accessing the App Store servers when attempting to sign in. I would suggest that you troubleshoot using the steps in this article - 
    Can't connect to the iTunes Store - Apple Support
    Thanks for using Apple Support Communities.
    Safe computing,
    Brett L 

Maybe you are looking for

  • Compounded characteristic are not displayed in the variable screen (BI 700)

    Hi Experts, How to display compounded characteristic  in the variable screen of queriies? Example : IO 0PROFIT_CTR is compounded to 0CO_AREA. Tryimg to select 0PROFIT_CTR via a variable, only values of 0PROFIT_CTR are displayed in F4 opo up, not thos

  • Photostream

    I keep getting the message Photostream exe. is not working whenever I open Icloud on  my pc

  • Material and Vendor Info

    Hi Team, Please provide a TCODE for the following: -Vendor and Material reference -Plant and Material Reference - Purch Group and Purch Org Thanks Anita

  • Recommended Hardware configuration for VS

    I was looking at how to improve the performance of my development PC and checked out the VS Virtual Machines on Azure. I noticed two main points, 1) they all seem to have a second drive that appears to be just for the swapfile/temporary files 2) they

  • Hard to Multi record in Logic Pro X

    I am recording a vocal track with a virtual piano track. I arm both tracks to record, but the piano will not record unless the track in also highlighted. This is INSANE. Is there a way to get logic pro x to behave in a "normal" manner? If a the R is