I can not export, can you help?

I have 10.0.8 version of Final Cut Pro X.
I have a 6 minute video I made and have tried to export it in various forms. When I export it, it either says: Quicktime Failed :50 or Error with frame 7729.
If it does work exporting to quicktime it usually changes fonts in the porgram or deletes the audio.
It will not export to DVD or Youtube. When I try to export it it is very slow.
Can someone walk me through this?

There are so many threads about this…
Find the clip at that frame number and replace it. (In preferences>editing>time display, select frames to make this easier.)
With the range tool, select a section of the sequence that includes the replaced clip and export as a master file. If it exports, export the same section, Share>DVD. In the export dialogue window. under Settings, set output device to HD. If it makes a disk image, you're probably good to export the whole project.
If replacing the clip didn't work, delete all your render files. Open a new project and copy and paste your old project's sequence to it.
Good luck.
Russ

Similar Messages

The product I bought its not working as i expected, it doesn´t translate the exact information from pdf to excel, how can you help me or how can you return my money back....

how can you help me

What about adobé export PDF. ?
Enviado desde mi iPhone
El 07/05/2014, a las 23:00, Claudio González <[email protected]> escribió:
The product I bought its not working as i expected, it doesn´t translate the exact information from pdf to excel, how can you help me or how can you return my money back....
created by Claudio González in Adobe Reader - View the full discussion
If you bought Reader, you were swindled, because it's a free program. And it has never been able of converting PDF files to any other format.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6363992#6363992
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Reader by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Can you help with WebQT stream, Muxed, Export to dv, to iMovie

Can you help?
Downloaded several QT video clips, muxed.
In QT Pro (7.1.2), joined several clips into one QT movie.
Exported to dv, to iMovie.
Problem: 1st imported clip plays ok, but remaining joined clips won't. iMovie recognizes entire time length of joined clips, but they just won't play.
Ideas?
(P.S. I record audio with Audio Hijack Pro (http://www.rogueamoeba.com/audiohijack/) from original QT clips, then paste into iMovie. This works very well.)

I found an answer to my issue but I have no idea why it was fixed. A post on another site suggested opening up Garage band and playing a few notes on the on-screen keyboard and them closing the application. What ever settings that invoked, it worked and I can now import video from my original Canon ZR !

I am currently using final cut pro 6 and i have a problem that i can not to do a play out to the dvcam but i can record from the dvcam, can you help please?

i am currently using final cut pro 6 and i have a problem that i can not to do a play out to the dvcam but i can record from the dvcam, can you help please?

I believe there is no "Export to Tape" feature as appeared in legacy FCP.
SORRY! Just noticed you are using FCP 6.
You need to ask this question in the Final Cut Studio forum.
Message was edited by: Ian R. Brown

I am receiving excel files, which I need to convert with my macbook pro...I did this with export, but the file I got didnt show graphs as it should...can you help...do I need to buy excel for Apple computer, or is there any easier way of dealing with it..

I am receiving excel files, which I need to convert with my macbook pro...I did this with export, but the file I got didnt show graphs as it should...can you help...do I need to buy excel for Apple computer, or is there any easier way of dealing with it..does App "Numbers" help here?

Numbers should be able to read Excel files without any problems. If Numbers does not read the graphics properly then you can try Excel Online. https://office.live.com/start/Excel.aspx

Problem with iOS7 : I have a message on my screen "This phone is not registred as a developper phone..." or something like that, can you help me because I download the iOS7 Beta even if I was not a developper. Thank you very much if you help me.

Problem with iOS7 : I have a message on my screen "This phone is not registred as a developper phone..." or something like that, can you help me because I download the iOS7 Beta even if I was not a developper. Thank you very much if you help me.

JaillotJb wrote:
I download the iOS7 Beta even if I was not a developper.
if you downloaded it and are not a developer, then we are not allowed to help you here. sorry.

Hi, Can you help me I am running an iMac 10.7.5 and iPad 6.0.1 and a macair10.8.2. iCloud is syncing emails and notes but not photos. Photo streaming is switched on on the iMac. what do I need to do to stream photos?

Hi, Can you help me I am running an iMac 10.7.5 and iPad 6.0.1 and a macair10.8.2. iCloud is syncing emails and notes but not photos. Photo streaming is switched on on the iMac. what do I need to do to stream photos?

Hi you have basicly 2 Options.
1 -if you Switch One fotostream on all 3 devices of yours which are working on the same apple id -all Fotos you Take with your iPad will be synchronized via icloud to the other 2 decvices ( w-lan and battery depending).
2- If you select foots or a whole album in iPhoto on your air or iMac and choose than puplish --> fotostream --> new or existing event you can key in a friends mail. If this friend has iCloud and iPhoto ( for iMac or MacBook ) and click on the link in the email it will download this fotos in the fotostream section in iPhoto. If he has a iPad, iPhone,... It will do it in the foto app and if he doesn't have a iCloud account at all and you choose "public web site" while publishing he can see your fotostream on a website.

In the previous version, the menu table in table options, there is an option that gives me the option: the Return key moves to next cell. I do not see this option in the new number. can you help me please?

in the previous version of Number, the menu table in table options, there is an option that gives me the option: the Return key moves to next cell. I do not see this option in the new number. can you help me please?

Hi silvano,
If you use a regular pattern when entering values, press enter (return) after entering the last value in a row. That will take you to the first Body Cell of the next row.
Start in Cell B2
1 Tab 2 Tab 3 Enter
4 Tab 5 Tab 6 Enter
7 Tab 8 Tab 9 Enter
Now you are ready to type into B5 .
Another way that some people find easier is to enter one column at a time
Start at B2
1 enter
4 enter
7 enter
etc.
Now start with C2.
Use whatever suits your work flow.
Regards,
Ian.

I AM STUCK WITH MOZILLA FIREFOX / NOT SHOWN ON MY LAPTOP SCREEN / USING HUGE AMOUNT OF RAM IN GENERAL - CAN YOU HELP????

Hi,
I have copied these problem on you site, as I could explain better then what they did, wich my problem remain the same as they have. And part me explaining what is really happen to my Laptop.
''Mozilla/Firefox 4 will not SHOW on my computer SCREEN.
Firefox won't load onto my computer. I have Windows 7, and each time I try to run the program to install it, it tells me I have another version still waiting to be installed that requires my computer to reboot. When I check "yes" to reboot, my computer reboots but still no Firefox. When I try to uninstall the the old Mozilla program from my Control Panels, there is no Mozilla files or programs listed not in my list of programs but when I go directly to the Windows File on the C: Drive, there's a Mozilla program file there. WHen I go into that file check, I attempt to open the uninstall program. I get an error message that says something to the effect of: "the version Mozilla on this computer is not compatable with my OS." Something about it being and 86bit program. My Firefox 3.6 worked fine 2 days ago. What's wrong??? ''
'''Firefox 4 using huge amounts of RAM on sites with Java scripts
I have been observing Firefox using huge amount of RAM when I am on sites that use Java Scripts to rotate images. I have tried a couple of different sites and have monitored the RAM usage. With Java script enabled Firefox 4 continues to grow its RAM usage by about 10MB a minute. I have had the usage hit as high as 1.5GB. As a comparison I have monitored the same sites in Internet explorer and have not seen the same issue. - Just to eliminate a site issue.
Turning off Java Script solves the issue and eventually frees the RAM.
I am using XP Pro, 3 GB RAM. '''''
My experince with Mozilla Firefox:
Here what really happen when I install the Mozilla Firebox on my La[top you can see the file is there but when I click the program to open its does not shown on the screen but when I check with WTM (Windows Task Manager) its shows that is ON and you can only witness the laptop going very slow and I have to reboot it, and I can not install any other Mozilla :( because of the same problem and all the above.
I really need Mozilla to work as soon as possible due to important deadlines I have pendent, and i can only use Chrome but is not my ideal program. Can you help me , please ?????
Thank you
Vitor Mendes

If it opens in safe mode, you may have a problematic add-on. Try the procedure in the [[Troubleshooting extensions and themes]] article.

Can you help with Tcode to fill this SETUP table? not working for me.

Hi,
For the datasource 2LIS_11_VASCL (SD Sales: Schedule Line Item), I need to fill the Setup Tables via OLI*BW
I understand the * to be the application number, which in this case it is 11 but I get a message that OLI11BW does not exist.
1. Can you help me with the tcode to fill the setup table for 2LIS_11_VASCL?
2. Since there are several datasources with the same application number 11, how do I fill only 2LIS_11_VASCL without filling the others:
2LIS_11_VAHDR                     Sales Document Header Data
2LIS_11_VAITM                     Sales Document Item Data
2LIS_11_VAKON                     Sales Document Condition
2LIS_11_VASCL                     Sales Document Schedule Line
2LIS_11_VASTH                     Sales Document Header Status
2LIS_11_VASTI                     Sales Document Item Status
2LIS_11_V_ITM                     Sales-Shipping Allocation Item Data
2LIS_11_V_SCL                     Sales-Shipping Allocation Schedule Line
2LIS_11_V_SSL                     Sales Document Order Delivery
Thanks

Ok,
I tried that and it basically bring you to OLI7BW as suggested above.
1. At this point, how do you know which of these it is actually filling:
2LIS_11_VAHDR Sales Document Header Data
2LIS_11_VAITM Sales Document Item Data
2LIS_11_VAKON Sales Document Condition
2LIS_11_VASCL Sales Document Schedule Line
2LIS_11_VASTH Sales Document Header Status
2LIS_11_VASTI Sales Document Item Status
2LIS_11_V_ITM Sales-Shipping Allocation Item Data
2LIS_11_V_SCL Sales-Shipping Allocation Schedule Line
2LIS_11_V_SSL Sales Document Order Delivery
2. Also, what does it mean when after running OLI7BW wide, with no restriction on my system, still rsa3 shows no records for 2LIS_11_V_SCL?
Any other way to confirm that there may not be any data in 2LIS_11_V_SCL?
Or any way, to make an entry which reflect in 2LIS_11_V_SCL so that I can verify if OLI7BW actually fills the setup table?
Thanks

TS3992 I have a pre paid Wi Fi with telstra for 12 months and yet I get the message of this I pad has not been backed up I have no idea how to back it up can you help. I have the same problem with my I phone withTelstra please tell me how to back them up

Hi I have an I pad 64 gig and internal wifi bought about 2 months ago. it keeps coming up with a message "this i pad has not been backed up" I have no idea how to do it can you help.
I also have an I phone 4s with the same message both are with telstra the I pad has a 12 month pre paid wifi contract and the phone is on a monthly contract.

Sounds like you actually paying for cellular service and you really need to be on wifi to backup your ipad/iphone.
Normally you have to be connected to wifi and you can do manual backup by going to Settings- icloud- storage and backup and pressing backup now button. Start with your ipad, usually size of the backup smaller and return here if you encounter a problem.

My Mail application is rejecting my password even though I'm putting it in correctly. Mail is working fine on my iPad and iPhone but not my iMac so it must be something to do with the Mail settings on my desktop. My software is up to date. Can you help?

I have an iMac, operating system 10.7.4 with up to date software. My mail application is rejecting my password even though I know I am putting it in correctly. I have an ipad and iphone and the mail application is working fine on them. On my desktop however I cannot receive or send mail. I think it must be something to do with the settings but cannot work out what. I have contacted BT who provides my email and internet. As I have another email address with them that is working correctly they believe it is a problem with mail rather than with them. Please can you help?

OK Vicky, good clues...
See if this helps...
Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over. See if there are duplicates, should be one for Incoming & one for Outgoing.
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544

HT4972 I have an Ipod touch version 4.2.1 and the instructions do not detail how to update to iOS 5. Can you help with me step by step instructions.

I have an Ipod touch version 4.2.1 and the instructions do not detail how to update to iOS 5. Can you help me with step by step instructions.

iOS 4.2.1 suggests that you may have 2nd generation Touch, which cannot be updated past iOS 4.2.1
Check http://support.apple.com/kb/HT1353 for help in identifying your model. A quicker method may be to check the back casing. If your iPod has Model No.A 1288 etched into it, then it's a 2nd gen Touch.
Assuming that you are using the latest version of iTunes (today, that is 10.6.3), to check if your iPod can be updated, connect it to your iTunes and look on the Device/Summary pane. Select Check for Updates. If there is one, you will see a message telling you that and how to install it. However, if you see a message saying that your iPod is up-to-date, then it cannot be updated.

My hard drive's gone, I did repair it and now I'd like to get my 'photoshop Elements 7 back, but got a message saying that the serial number is incorrect and it's not. can you help me, please?

My hard drive's gone, I did repair it and now I'd like to get my 'photoshop Elements 7 back, but got a message saying that the serial number is incorrect and it's not. can you help me, please?

Mseixas you can try running the CC Cleaner Tool located at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html and then reinstalling.

Trying to download iTunes on my husband's windows vista laptop and we keep getting error messages that say error z, apple application support was not found, windows error 2. Tried 2 different browsers and it still would not work. Can you help? Thank you.

Trying to download iTunes on my husband' s windows vista laptop. Have tried 2 different browsers and it almost finishes the download process and we get error messages that say "error z, apple application was not found, windows error 2" Can you help? Thank you.

See Troubleshooting issues with iTunes for Windows updates.
tt2

My right click is not working. the context menu does not come up and i can no longer drag files/folders. I have checked the mouse and track pad in system preferences and the correct boxes are all checked (with a support member). Please can you help

My right click is not working and producing the context menu or ability to drag files and folders. I just spoke with a phone support person and we checked that all the mouse/trackpad options for right click were correct and checked.
Please can you help with this.
It has only just happened in the last few days.
Many thanks

You might want to update your profile so that we can see what model iMac you have and what version of OSX you're running.
For this question, it might help to know if you're dealing with a trackpad, Magic Mouse, or something else?
(Until your issue's resolved, you can Control-Left Click to get the right click functionality).

I can not export, can you help?

Similar Messages

Maybe you are looking for