I can not find a suitable driver for my hp deskjet 1280 for OS X 10.7 Lion (macbook) Please help.

I can not find a suitable driver for my hp deskjet 1280 for os x 10.7.  Since updating my software the printer will only use basic functions and prints only black and white, how do I enable the printers full capabilities? Thanks!

Hi,Officially the printer no longer supported on OS X 10.6 or above, therefore the reduced quality due the Generic driver usage:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&task Id=120&prodSeriesId=439162&prodTypeId=18972&prodSeriesId=439162&objectID=c018563 59
However, you may try the 3rd party HPIJS print drivers which list your printer as supported and will more likely provide you a better qualiity then a Generic driver.
Be sure to install any of the 3 required downloads and follow the steps to Set Up the printer:
http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/hpijs
Shlomi

Similar Messages

  • Where can i find the sound driver for my Toshiba Satellite U505-S2970 ?

    Where can i find the sound driver for my Toshiba Satellite U505-S2970 ?
    Please help me. 
    Thanks

    If "Realtek High Definition Audio" is listed under the "Sound, video and game controllers" in the Device Manager then that is your sound driver. Some people have had luck with uninstalling the Realtek HD audio driver from their computer via the Device Manager (be sure to check the "Delete driver software for this "), and then reinstalling it. You can get the latest version of the Realtek HD audio driver from the Realtek download site.
    Many of us who have the Realtek HD sound driver have had to make several tweaks to improve the sound. Opening the Realtek HD Manager and enabling Loudness Equalization and setting the equalizer to Powerful helps with some of the low audio issues some of us have experienced with the Realtek HD sound drivers.

  • RT: Remote desktop says "can't find a suitable device for drive C"

    Hello,
    there is a french post on exactly the same topic, but I can't apply the solution given there.
    My problem is the following: I have a remote desktop prepared to work as RT target. It has been checked for compatibility, the hard drive has been formatted in FAT32 format, it has been found by my host and has been assigned a static ip address. I have installed the software I need ( LabView 9.0 RT) using MAX. Now, when I try to boot it with the option "boot using software installed into the hard drive", all I get is the message
    "Can't find a suitable device for drive C"
    I have reseted the BIOS, have tried formatting the hard drive in the other format, uninstalled and reinstalled the software, tried to start the target pc without the usb stick, but nothing seems to work.
    Do you have any ideas about what is going wrong?
    Thank you,
    Samuel
    Solved!
    Go to Solution.

    So you've got a IDE (and not SATA) hard drive? That should be supported anyway.
    That would only confirm my experience... it's hard to find hardware compatible with LV RT. Before buying you cannot know if it's compatible. Once you have it the evaluation tool might tell you it's supported but still it might not work. I tried several motherboards in the last years, most of them did not work.
    Your best bet might be to use relatively old hardware.

  • Where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.

    where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.
    if there is no driver maybe you can tell me the closest instrument that comes to this one from the list at,
    http://search.ni.com/query.html?lk=1&col=alldocs&nh=500&rf=3&ql=&pw=595&qp=%2BContentType%3AInstrumentDriver+%2BIDNetManufacturer%3A%22Hewlett-Packard%22&qt=peak+power+analyzer&layout=IDNet
    so i could modify and use the driver

    Hello,
    It looks like Agilent/HP makes the 8990A, but I was not able to find a driver for it that we or Agilent has written for this device.
    Since I am not familiar with the 8990A, I cannot recommend which drivers might be similar, but you are pointed in the right direction. Agilent themselves might know more about which models use similar command sets so that you can modify a driver easily.
    Hope this helps.
    Scott B.
    Applications Engineer
    National Instruments

  • HT4790 I can not find my hard drive after encryption

    I have a macbook pro I upgraded to Mountian lion from 10.6.8.
    Went through the encryption process. Now my user can not find his hard drive after a re boot
    Steve

    Uninstall the program. It should have come with an uninstaller. If not, contact the developer for instructions.

  • Error!! Can not find the delivery details for the delivery Id :

    hi all,
    I have a report which i need to burst in seven different reports wherein my delivery key is column "emp_id". Now when i schedule the report to burst then the report completes with a warning. I see that there are various delivery cycles for the report and for one of the cycles i get the following message
    Error!! Can not find the delivery details for the delivery Id :
    hence, what happens due to this is, even there are successful deliveries for other delivery ids but then i get only two rows of data in each of the seven bursted ouput xls files. wheareas the data runs in thousands of rows for each cycle.
    Hence whats happening is, that due to error /warning in one of the delivery cycles other reports are also not showing data.
    I am not sure whats causing the issue and why i am not getting complete bursted files out.
    Please suggest
    Thanks
    Ronny

    I guess, you are in 10.1.3.3.2 :),
    in the latest release 10.1.3.4.1, there are more enhancement wrto bursting and performance i believe.
    check th release notes
    can you send me the xml and bursting query you have, i can try simulating in my local.

  • Nternal ERROR: Can not find the ACL containter for object ...

    We are using OWB 10.2.0.3. We tried to introduce two basic roles to prevent user A from accessing certain parts of our project. Somehow (I cannot really say how) we ended up in the error message below whenever we want to modify the security properties of an object.
    Neither in metalink nor in the oracle forums I could find any hint about that error.
    Can anyone help??
    Thanks in advance, Maren
    Internal ERROR: Can not find the ACL containter for object:CMPMap@1ba11bc/id=2023180/owningFCO=2023180/proxyFor=(CMPMapGen@1a4d5c6/id=2023180/stname=CMPBatchMap/pname=LOAD_XML/lname=LOAD_XML/status=CLEAN/committed=true/persistent=true/propsLoaded=false)
    Internal ERROR: Can not find the ACL containter for object:CMPMap@1ba11bc/id=2023180/owningFCO=2023180/proxyFor=(CMPMapGen@1a4d5c6/id=2023180/stname=CMPBatchMap/pname=LOAD_XML/lname=LOAD_XML/status=CLEAN/committed=true/persistent=true/propsLoaded=false)
         at oracle.wh.repos.pdl.security.SecurityPolicyManager.getAccessCharMapOfPrivilegeOwner(SecurityPolicyManager.java:166)
         at oracle.wh.repos.impl.foundation.CMPElement.getAccessCharMapOfPrivilegeOwner(CMPElement.java:2743)
         at oracle.wh.repos.pdl.security.OWBSecurityImpl.hasPrivilege(OWBSecurityImpl.java:820)
         at oracle.wh.repos.pdl.security.OWBSecurityImpl.internalSecurityCheck(OWBSecurityImpl.java:1449)
         at oracle.wh.repos.pdl.security.OWBSecurityImpl.securityCheck(OWBSecurityImpl.java:649)
         at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:660)
         at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:623)
         at oracle.wh.ui.common.WhSecurityHelper.securityCheck(WhSecurityHelper.java:112)
         at oracle.wh.ui.console.commands.EditObjectCmd.performAction(EditObjectCmd.java:107)
         at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
         at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:189)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:478)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)

    Hi Maren
    Like you I get this error and do not know what steps caused it.In my scenario I have some mappings that give the error and some that do not - the repository user gets the error but the repository owner does not.
    Thinking back over the last number of months (as this project contains 7-8 months od work - we do have exports of the project) I think the ones giving the error are those that perhaps were copied from another to start the coding but I cannot be sure.
    I have read the metalink note mentioned above as well as the the queries posted by Oleg and yourself. The queries posted are slightly different, one has a where clause
    fco.classname = 'CMPACLContainer' (Maren's)
    and the other
    fco.classname='CMPMap' (Oleg's).
    Was this intentional Maren on your behalf for your problem to be fixed?
    We are using 10.2.0.3.33 OWB client and 10.2.0.3.0 OWB repository.
    Thanks
    Edwin

  • HT204266 My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

    My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

    My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

  • Can not fine external hard drive for time machine sence lion was installed

    I can not fine external hard drive for time machine sence lion was installed, it don't reconise it at all.

    I have a Mac Mini (late 2009) and I have an iomega 1TB external hard drive connected to my mini via firewire and usb (usb allows me to use the usb ports on the external 1TB drive to daisy chain other devices).  Since I installed Lion, my Time Machine  and this 1TB drive (and its partitions) is finicky.  Sometimes it is mounted and sometimes it is not.   This issue has only surfaced post Snow Leopard and in the Lion era. I am not the first to say this but the whole reason I went Mac was b/c of Vista.  I am beginning to think that Lion is the new Vista.  Sorry for the latter, just venting... b/c this ain't the first issue with Lion.

  • Where can I find a print driver for my e-mac running os9.2

    Where can I find a print driver for my e-mac running os9.2

    Actually the best place is the web site for the printer. You'll also need the model, but there are still some OS9 drivers out there.
    You must supply the printer make and model for people here to help further.

  • I can't find the yosemite driver for my epson r3000 printer.

    I can't find the yosemite driver for my new epson r3000 printer. I am using 10.10.1. The Epson website says to find the driver by going to the App store and looking for updates. I did that and didn't find any.  In "Printers and Scanners" in System Preferences I notice that the computer is aware that I am connected to the printer (via USB) but a message  at the bottom of the window says that "Software for this printer isn't available from Apple. Contact the printer's manufacturer...".  What to do?

    See -> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 173163&prodoid=63090295&infoType=Downloads&platform=All.
    It looks as though Epson has a driver compatible with Yosemite.
    Clinton
    MacBook Pro (15” Late 2011), OS X Yosemite 10.10.1, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

  • Suddenly all of my Office-programs have stopped working and will not launch on my MacBook. Could anyone give an amateur from Norway a hint of what may cause the problem? And I can not find the installation-disc for Office...Super! :)

    Suddenly all of my Office-programs have stopped working and will not launch on my MacBook. They were all already installed when I bought the computer. Could anyone give an amateur from Norway a hint of what may cause the problem? (And I can not find the installation-disc for the Office Programs...Super!)

    Have you contacted Microsoft support - http://www.microsoft.com/mac/support ? 

  • After iPhone connects to iTunes, can not find the photos tab for sync

    After iPhone connects to iTunes, can not find the photos tab for sync. Thus, I can not copy some phototes from my Macbook to iPhone, But my iTouch can do this. I don't know why.

    If you are using a mac, you use iphoto.
    If you are on windows, you use whatever camera software windows uses.
    Itunes does not import photos.

  • What do I do if I can not find the serial number for lightroom?

    What do I do if I can not find the serial number for lightroom?

    If youv'e already registered it, the My products and services page should have your serial number.

  • How can I get a better driver for my 1394b Hostcontroller in my Macbook pro 2010 to solve the problem, that it is too slow under Windows 7 installed with bootcamp ?

    How can I get a better driver for my 1394b Hostcontroller in my Macbook pro 2010 to solve the problem, that it is too slow under Windows 7 installed with bootcamp ?
    WIndows can't find a better one than the installed LSI Conformed 1394 Hostcontroller

    Read and follow the Bootcamp Installation instructions that you were offered to view when you ran Bootcamp Assistant.
    Run Bootcamp Assistant again and select the option to download the Bootcamp Support software. Follow the instructions. Then boot into Windows and install the Windows Support software you downloaded and saved.

Maybe you are looking for