I can not find Mac Mail resource folder

Step 1
Open "Finder" and navigate to the stationery "Resources" folder. By default this is located in "Macintosh HD/Library/Application Support/Apple/Mail/Stationery/ Apple/Contents/Resources. Make sure you are in the hard drive library folder and not the user's library folder.
I can not find this path. Below is what i do get???? I held the "OIption" key and under "GO" to get to Library

ballardisgone wrote:
I held down the option key,went to GO then Library icon???
That is your user Library.
Triple click the line below, press ctrl then click on the highlighted line
/Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery
Select from the pop up menu
Services ▹ Reveal
You are in the right folder

Similar Messages

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"
What are the correct mail account settings and more importantly the correct DNS settings
Thank you for any help you may be able to provide
Cheers
Chris (iMac i7)

Do not delete the old account yet. sign up for an iCloud account if you haven't.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
          •          Server name: imap.mail.me.com
          •          SSL Required: Yes
          •          Port: 993
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
SMTP (outgoing mail server) information:
          •          Server name: smtp.mail.me.com
          •          SSL Required: Yes
          •          Port: 587
          •          SMTP Authentication Required: Yes
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0

Suddenly can not access .mac mail from Apple Mail

Suddenly, I can not access .mac mail from Apple Mail (Version 2.1.1 (752.3)).
For quite a few years I have been using Apple Mail to access my .mac email. As of last Friday, Mail stopped working. Nothing has changed (accept for the installation of the latest OS X security upgrade - SecUpd2006-008Univ.pkg).
I can still access my .mac mail through the .mac web browser and I can still access it through SnapperMail on my Palm Treo 680. But, when I open Apple Mail on my MacBook, it does not do anything, just sits there. When I open the Activity Viewer window, 3 activities are going on:
1. Opening Mailbox
2. Synchronizing with Server (Connecting to...)
3. Synchronizing with Server (Synchronizing with...)
After a few minutes, the error triangle appears next to the Inbox and .Mac logos on the left hand panel.
I have tried Apple Mail from several locations (different ISP / WiFi / LAN) over several days but get the same problem.
Does anyone have ideas for a solution?
Regards
Peter

Let’s first make sure that the update is installed properly, and post back with your observations when done.
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all filesystem issues, if any, reinstall the update that appears to not have been installed properly. You may also need to reinstall the Combo Update for the type of computer and the version of Mac OS X you’re using, unless this is the version of Mac OS X that came with your computer:
About the Mac OS X 10.4.8 Combo Update
Mac OS X 10.4.8 Combo Update for PPC
Mac OS X 10.4.8 Combo Update for Intel
Take a look at the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates
Basically, you should verify/repair the startup disk before installing the update, no applications should be running while installing it, and you may experience unexpected results if you have third-party system software modifications (not normal applications) installed.

I can not find library/application support folder for garageband

Hi,
i am trying to install au plug ins to garageband but i can not find the folder library/application support/audio
please help
Many Thanks

That was for audio plug-ins.
Here is the Application Support:
Here is the Path: Hard drive --> Library --> Application Support --> Garageband

G4 can not find Mac Tiger 10.4 upgrade disk

I am running 10.3.9 and trying to upgrade to tiger 10.4. When i put the disk in absolutely nothing happens. my computer can not even find it. I normally dont have this problem. How do i install this. Also will this disk work with my computer? it is Mac OS Tiger upgrade dvd with Xcode 2, which i have no idea what that means. any help is appreciated!

phnxxx4, welcome to Apple Discussions.
Is the DVD you have black or gray?
Tiger install DVDs are in short supply. Tiger is no longer available at the Apple Store but is still available for $129 by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753). For other sources, do a Google search for MA453Z/A and M9639Z/A . Also look on eBay. Be sure & buy a retail version (black with silver X) and not a model specific version (gray).
Also check this web store http://www.lacomputercompany.com/cgi-bin/rpcart/index.cgi?command=dispitem&type= sku&sku=19521
Possible Alternative - OS X Tiger 10.4 Upgrade DVD $74.95
http://www.yourmacstore.com/shop/shopexd.asp?id=376&bc=no
 Cheers, Tom

Can not access .mac mail thru shared internet connection

I own a powerbook G4.
I recently purchased a mac mini for home. It is connected to a cable modem via ethernet.
I am connecting the powerbook to the internet using internet sharing via airport thru the mini - no problems.
I am, however, unable to connect to my .mac mail from the powerbook.
The following message is displayed:
-There may be a problem with the mail server or network. Check the settings for account ".Mac Account" or try again.
The server error encountered was: The connection to the server "mail.mac.com" on port 993 timed out.
I am able to check mail from the mini.
What am I doing wrong?
It was working earlier, and it DOES work if I reverse the config and connect my powerbook to the cable modem ... weird.
Any help would be appreciated.

The server error encountered was: The connection to
the
server "mail.mac.com" on port 993 timed out.
Port 993 indicates Use SSL (Secure Sockets Layer) is
selected for the .Mac SMTP server which I didn't
believe is supported with a .Mac account and when
selected, I'm not sure why it is working when
connected direct to the Cable modem and not
otherwise.
Go to Mail > Preferences > Accounts and under the
Advanced tab for your .Mac account preferences,
deselect Use SSL and the incoming mail server port
will change from 993 to 143 which is the standard
incoming mail server port for a .Mac or IMAP type
account.
Still does not work.
Port 143 times out.
Both computers accessing the same .mac account - is this a problem?
All other aspects of the wireless network function. Just no email (in or out) on the powerbook connected via airport.
Reset both machines several times as well.
Thanks in advance ...

I have a g4 power mac and system is 10.4.11. Where do you find mac mail?

I accidentally trash mac mail and now I need to reinstall. Where
can I find mac mail. Is it on os 10.4.11 system disk. The g4 is a old computer.
Please advice.

HI Agnes,
Did you just delete it from the Dock?
If so look in the Applications folder.
If you deleted the real Mail.App...
Get Pacifist...
http://www.charlessoft.com/
then extract/install what you need from your Install Disc.
Or re-apply the big 10.4.11 Combo update...
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
Repair Permissions afterwords, reboot.

Mail can not find certificate in key safe

Hi,
I am using own certificates that work all fine with all pc and iphones and ipads and macs using OS below 10.10 (Yosemite) and 10.10.1.
Since I updated a mac pro to the new OS, mail can sign and encrypt replies to received mail, but can not find the certificate when creating new mails.
An error windows drops from the top in the mail editor window (message can not be signed, no trustworthy certificate could be found):
When mail is started fresh, it shows in the properties a certificate line
Once a new mail was tried to produce with using certificates the TLS line disappears:
I think something is wrong in mail. Any idea?

First, the address associated with the S/MIME public key must exactly match the address to which you're trying to send the encrypted message, or from which you're trying to send a signed message. If the message is both signed and encrypted, both addresses must match. The matching is case-sensitive: "[email protected]" does not match "[email protected]".
The signing and/or encrypting certificates must be valid: not expired, revoked, self-signed, or signed by an unknown CA. You can check the status of the certificate in Keychain Access (see below.)
If you can't encrypt or sign messages to a valid address with a valid certificate, continue.
Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select
          Change Settings for Keychain "login"
In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
          Keychain Access ▹ Preferences... ▹ First Aid
If the box labeled Keep login keychain unlocked is not checked, check it.
Select Keychain from the menu bar and repair the keychain.
Quit and relaunch Mail. Test. If the problem isn't resolved, continue.
Export all S/MIME certificates, delete them from the keychain, and reimport. For instructions, select
          Help ▹ Keychain Access Help
from the menu bar and search for the term "export" in the help window. Export each certificate as an individual file; don't combine them into one big file.
Test again. If the test fails, delete all the certificates again, then reinstall them from fresh copies.

Can not find some messages in Mail using search

I have some problems with Mail.app I can not find some messages in Mail using search, the strange thing is that sometimes mail search finds some messages, but after rebuilding spotlight index the search displays other messages with the all messages searched using same search criteria. I have also tried to delete Envelope index file from the Mail folder in usr/library and forced mail to import all mailboxes but it started to crash importing some of mailboxes - I deleted the messages from that mailboxes, imported remaining mailboxes and tried to rebuild mailbox, but everything without a successes. Any ideas how to solve it?

Hi lnaki vila
I'm using pi 7.0 version
i can see the other scenarios like SOAP to RFC, SOAP to IDOC,FILEto IDOC
in sender side i'm not using any communication channel and adapter engine i'm just using http client tool for testing purpose
i'm getting the response that's fine because its a synchronous communication
i checked sxmb_adm in that -->integration configuration LOGGING parameter of category RUNTIME is set to ENGINE_TYPE and current value is HUB(Integration server)
thanks in advance
regards
Satish

Folder from my desktop has disappeared and I can not find it!

I'm hoping someone out there can help me. To put it in short, I have been typing my notes for an exam that I need to pass for my medical license for the last couple of months. Yesterday I went to save the newest document to the folder (which I had saved on the Desktop of my Mac) and it wasn't there anymore. I'm not sure if any other files are missing because that was the main one that I was using at the time. I went into Microsoft Word and File > Recent and they are all listed there but when I click to open them it says that it can not find the file and if I would like to search for it myself. I do have an external hard drive but I guess I did not back up my stuff since I started working on these notes (yeah yeah I know dumb mistake). Can anyone help? I tried using StellarPhoenixMac recovery but I don't think it found anything worth while. Thanks.

Try repairing disk permissions using Disk Utility.
Repairing a disk's permissions using Disk Utility.
Note: This should not delete any information or files from the disk.
Repairing a disk's permissions can help solve various file-related issues.
To begin, make sure your external disk that you are repairing is connected to the computer. If you are repairing an internal disk, skip this step.
After the drive is connected, launch the Disk Utility application in any of the following ways:
Type the first few letters of its name into Spotlight. Select it from the results.
Go Finder > Applications > Utilities > Disk Utility
Go Launchpad > Utilities > Disk Utility
Once you are in the Disk Utility app, select the external drive from the sidebar on the left.
Then, choose the Repair Disk Permissions button on the right.
If this does not solve your issues, you may have no choice but to reformat the drive using Disk Utility.
I hope I answered your question.
Austin

I shot some video on my iphone and can not find a way to upload the videos to my Mac.

I shot some video on my iphone and can not find a way to upload the videos to my Mac. I can not find anything in the iPhone manual or in these discussions. I am sure there is an easier way than emailing each file to myself. Help!

Connect your iPhone to your Mac and start the Image Capture app. It's in the Utilities folder which is in the Appliations folder on your Mac.

I just purchased a new airport extreme 802.11ac I set it up and runs fine when i put my mac to sleep i come back and it can not find my airport i have to restart

I PURCHASED THE NEW AIRPORT EXTREME 802.11AC I SET IT UP AFTER I PUT MY MAC TO SLEEP I COME BACK AND IT SAYS CAN NOT FIND AIRPORT EXTREME I HAVE TO RESTART AND IT FINDS IT.

Try the following, in order, until (hopefully) resolved:
1a. Delete Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Under "Preferred Networks," delete the network(s) you regularly use from the list.
1b. Delete AirPort Keychain Entries
Launch the "Keychain Access" application located in Applications/Utilties.
In the windows on the left side: Select login for Keychains and "All Items" for Category.
Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
1c. Add Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Add the preferred network(s) using the "+" button.
Restart or log out then back in.
2. Move System Configuration Files
(Note: You will have to reestablish your network connections settings.)
Go to /Library/Preferences
Move the SystemConfiguration folder to the desktop.
Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder back to it's original location.)

Can not find "Work Folder" in windows server standard edition

Guys, I have a testing lab and all is working with the exception of the fact that I can not find "work Folder" to install it. I'm using windows server 2012 standard evaluation copy edition. Normally work folder should be under >file
and storage service>file and iSCSI services. However, it is not there. Can someone help please
staphisco

Hi,
From the overview, Work Folder is not supported in Windows Server 2012 (only Windows Server 2012 R2).
Work Folders Overview
http://technet.microsoft.com/en-us/library/dn265974.aspx
Software requirements
Work Folders has the following software requirements for file servers and your network infrastructure:
A server running Windows Server 2012 R2 for hosting sync shares with user files
If you have any feedback on our support, please send to [email protected]

Mac mini can not find the NAS

In my network I have a Mac mini, AirPort Extreme base station and a Netgear ReadyNAS Duo v2. Everything is connected by cable. The problem is that the Mac mini can not find the NAS. Mac mini is looking for wirelessly connected devices, type TimeCapsule. How do I get my Mac mini to find the NAS and set the NAS as a source of data storage?

I have a ReadyNAS and use it as a Time Machine destination with no problems, even over WiFi. The ReadyNAS and Mac are both on the same LAN (even though the Mac is on WiFi), please check to see if your WiFi is on a different LAN to the Ethernet side of things, I have my Airport set to bridging mode so both sides of the AirPort count as the same LAN.
Next you need to check you have actually configured Time Machine in the ReadyNAS, as shipped it is initially turned off. You need to go to the ReadyNAS web management interface (FrontView) and then click on Backup on the left, and then select Time Machine. You also need to make sure Bonjour is enabled for the ReadyNAS, this is accessed by clicking on Services on the left and then selecting Discovery Services, make sure all the Bonjour options are ticked on.

Can not find the Automation Folder.... neither its Key Command...HELP

I would be grateful to anyone who could find a solution to the following issue:
I have read in Logic's 7.2.3 help reference about track automation folder. The sort of arrange window that seems to lurk behind the main arrange page and the place where you can treat the automation data as proper region material. I have tried everything, .. there does not seem to be any key command of the sort, more over I can not find any other way that could give me access to such an editor like the Automation Folder.
Thank you for reading this.
Nik

• 1 • If you choose 'New Track' from the Menu, or use Control-Click-&-hold, you can select from the various options.
• 2 • No, you don't need to do anything — it's entirely voluntary… I feel guilty for even mentioning it… I just thought that since you seem to be genuinely grateful for the help you have been getting, you had probably not read the article fully. I see that you have just had a useful reply from John Alcock, so now's your chance!

I can not find Mac Mail resource folder

Similar Messages

Maybe you are looking for