I can not find my device (I Pad) when connected to my desktop.

I am unable to find my device (IPad) in ITunes when when connected.

Hello Myrtle1234
Start with the article below to troubleshoot your iPad showing up within iTunes.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
-Norm G.

Similar Messages

  • TS3694 mi ipod touch will not boot, it goes to the apple logo then shuts off, I tried to restore it but it shuts off while restore is going on then it saids it can not find the device

    Hello,
    I need help before i go to the apple store for help.
    My problem is that I have an Ipod touch which it was working fine but now it will not boot all the way.
    It will not show the red bar when is ready to be turn off or reboot when using both buttons to reset it it will only come to the apple logo then goes blank.
    I tried to restore via Itunes but same result, it will start showing is doing the extract then it will go blank and get a message saying that It can not find the device.
    What do i need to do.
    Thank you for your help.
    regards,
    Mario
    PS. The OS I am not sure do not remember exactly.

    - Reboot the computer
    - Try another USB port
    - Try another cable try another cable
    - Inspect the dock connector for bend or missing contacts, corroded contacts, broken, missing or cracked plastic.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Hello buy a movie on apple tv, and now can not find the device tells me I should go to settings / downloads / check downloads, but that does not exist in the menu of the apple tv, please help

    Hello buy a movie on apple tv, and now can not find the device tells me I should go to settings / downloads / check downloads, but that does not exist in the menu of the apple tv, please help

    Welcome to the Apple community.
    A number of people have reported similar issues recently, many appear to have found a discrepancy of some kind in their account settings and making changes to these settings or simply resetting them has resolved the matter.
    Check your account details are correct, check that you are using the correct details for Location, Region and Time Zone. You may want to change these settings and then change them back to see if that helps.
    You might also try logging out of and then back into your iTunes account (Settings > iTunes Store > Apple ID’s > Sign Out) and restarting your router. (Some have reported that after doing this, they need to check for rentals even though it may report that there aren’t any, after which rentals once again appear in the ‘movies’ feature)
    Rentals should appear under their own heading in the ‘Movies’ feature, you might also check at Settings > iTunes Store > Check For Rentals.

  • IPod: I clicked the eject button on the sidebar in itunes now I can not find the devices button or my iPod anymore in the iTunes side bar.....Help!

    iPod: I clicked the eject button on the sidebar in itunes now I can not find the devices button or my iPod anymore in the iTunes side bar how do i find it again?.....Help!

    You can use iTunes, connect iPod Touch to computer iTunes.
    Select iPod Touch in iTunes under DEVICES (left panel)
    Select Books tab (right panel near the top)
    Deselect those books that you have read
    Click Sync button (bottom right)
    Have a read to get up to speed using iPod Touch
    iPod touch User Guide (For iOS 5.0 Software)

  • BlueTooth can not find any device or cell - TOSHIBA Qosmio X505-Q894

    I have a  TOSHIBA Qosmio X505-Q894 win 7 64 bit My Bluetooth will NOT find any devices.... Including my phone, HTC evo 4g. I'm at a coffee shop and my phone sees 6+ items and my PC sees none I have uninstalled all the Bluetooth devices in Device Manager and reinstalled Toshiba Stack 6.4 and 7.xx differenttimes. I also have turned off "auto windows driver update" so it didn't interfer with the toshiba download drivers. I have made my phone discoverable and also my phone does not see my laptop even....
    THE actual problem - WILL NOT detect anything. http://official3.com/toshiba/wififail.gif
    PICTURE OF my F8 controls http://official3.com/toshiba/F8.gif
    My Device Manager - everything is "working" http://official3.com/toshiba/device-manager.gif
    Bluetooth logo in corner. http://official3.com/toshiba/wififailcorner.gif

    Anyone? Please help!

  • HT5622 Trying to send some  ringtone files to my new iphone 4s... thprogram tells me to go to itunes and click on my phone under devices... i can not find the device button anywhere on your home page

    Trying to send some ringtones from desk top computer to my iphone 4s.... the instructions tell me to go to itunes...click on devices and find my phone.... where would i find the device button on your home page/

    u

  • Can not find display device for screen 1

    Hi guys,
    I got a strange problem. I HAD a working tv-out with my beyond kernel. I updated my system:
    starting full system upgrade
    [06/08/06 21:41] removed nvidia (1.0.8178-16)
    [06/08/06 21:42] upgraded codecs (20050412-2 -> 20060501-3)
    [06/08/06 21:42] warning: extracting /boot/kconfig26 as /boot/kconfig26.pacnew
    [06/08/06 21:42] upgraded kernel26 (2.6.16.19-1 -> 2.6.16.20-1)
    [06/08/06 21:42] installed nvidia-utils (1.0.8762-4)
    [06/08/06 21:46] installed nvidia-beyond (1.0.8762-1)
    After that I can not use my sweet tv-out anymore. As u can see I have used nvidia driver with my beyond kernel so I installed the nvidia-beyond instead.
    Can some one tell me what went wrong?? 

    Well if u mean if I removed the old nvidia driver then yes. I am currently having two kernels one is my beyond and the other is the standard one. So for the moment I am running beyond kernel with beyond nvidia....and I also got nvidia-utils installed since the driver wants it. I got dual boot I started up windows and  in that OS my tv-out is working. Maybe I should totaly remove the old kernel and mkinitrd..dunno if that will fix my prob. Ohh..I have rebooted after wards ...  One strange thing is that I booted up with my old kernel and installed nvidia driver as well. To see if I could get my tv out back. At that point I had both drivers installed, maybe they did a conflict..I will reinstall all nvidia drivers including utils and only have beyond driver...I got a feeling that my driver mess things up totaly.

  • Time machine can't find wireless device despite strong Wifi connection

    Every time I try to set up time machine, whenever it tries to find a wireless device it says "Airport Utility was unable to find any Airport wireless devices. Make sure the Airport wireless device you want to set up is plugged in and in range of your computer, and then rescan again." I already have a perfectly strong connection to my router so why does it keep saying that it can't find a wireless connection?

    Bernard778 wrote:
    I have the very same problem. MB recognizes my 2TB Verbatim when connected directly via USB and Time Machine goes to work. When I connect the HDD to my router, my MB sees the HDD in Finder, but Time Machine can't find it ("Airport Utility was unable to find any Airport wireless devices. Make sure the Airport wireless device you want to set up is plugged in and in range of your computer, and then rescan again.").
    @Pondini - this is not a time capsule, I have a HDD on my WiFi network.
    Hi, and welcome to the forums.
    You have two problems with this setup.
    First, Apple doesn't support backing-up that way. See this Apple article: [Disks that can be used with Time Machine|http://docs.info.apple.com/article.html?path=Mac/10.6/en/15139.html].
    Second, backups done locally (when the HD is connected to your Mac via USB) are placed in a Backups.backupdb folder at the top level of the drive. When they're done over a network (Ethernet or WIFI), that folder is inside a +sparse bundle,+ and you can't easily switch between the two.

  • Why can not find "NationalInstruments.Teststand.Interop.API" when add it from C# referenes

    Hello experts,
    I would like to learn to how to use C# IN teststand,and find an instructio about how build dll in C#.
    It said add  "NationalInstruments.Teststand.Interop.API" reference in C# references.
    However,it can not be found as attached.
    Who can help about this,appreciated for your help.
    Attachments:
    0140710152735.png ‏127 KB
    0140710152735.png ‏127 KB

    Hey Albert,
    The corresponding assembly is in your first screenshot, listed as "TestStand 2013 API Primary Interop Assembly". 
    Hope it helps, and let us know if you have any more questions about it!
    Daniel E.
    TestStand Product Support Engineer
    National Instruments

  • Satellite Pro A300 can not find USB devices

    Hello forum,
    we have a costumer who has bought a Toshiba Satelite Pro A300 from us, but he gets a strange error on it.
    he connects a Sandberg USB 2.0 5port Hub to one of the usb ports, the pc finds the hub, but when he connects a memory stick to the hub nothing happens.
    the hub and memory stick works on others pc's.
    hope somebody can help.
    best regards
    John Bork
    DANBIT A/S

    Hi
    What happens if you connect the memory stick directly without this USB hub?
    I had also an USB hub but these hubs are a little bit complicated and tricky The USB specifications allows a certain power and depending on the devices that you connect you have to use an active USB hub, that means with external power supply.
    But normally Satellite Pro A300 should have enough USB ports If its necessary I would recommend an USB hub with 2 or 3 ports maximum

  • I CAN NOT FIND MY DEVICE SETTING IN ITUNE

    HOW CAN I SET MY SYSYTEM TO SEE DEVICE IN ITEUNE 10.7

    Please fix your CAPS lock key, typing in all CAPS indicates yelling and is frowned upon in online forums.
    There is nothing in iTunes to set a system to see devices.
    Device not detected in iTunes for Windows

  • Connecting Iphone to PC, but can not find iphone device in iTunes.

    When I connect my Iphone to my PC, it doesn't work..There no signal Iphone4 syncing in iTunes. Can anyone help?
    What wrong with Iphone, when I connect to my PC. It appears only a Autoplay, but no new devices in iTunes. How can I transfer mp3 and video from PC to iPhone???

    Start here:
    http://www.apple.com/support/itunes/books/

  • Windows can not find specified device, path or file. You may not have appropriate permission to access

    What do I need to change to get past this? I tried changing all user accounts to administrator, but to no avail.

    Hi
    Some required information are needed for us to help you.
    Hi NabeelOmer,
    We wonder if you have taken any action such as system restore after this issue occurred.
    You might also try this command to restore your access control list.
    Run this command to navigate to the drive letter, example is D
    D:
    To reset all permissions, run this command
    icacls * /reset /t /c /q
    Visual Studio is a very invasive program and which provides the ability to enumerate projects and solutions for system, user should never try uninstalling it manually without any guidance.
    Visual Studio made changes for your whole system, if the file has been moved or deleted this error would occur.
    Since you mentioned that you get this error almost everywhere even in control panel. We suggest you repair/reinstall your Visual Studio first and check if it could be fixed.
    How to: Repair Visual Studio
    https://msdn.microsoft.com/en-us/library/aa983433%28v=vs.90%29.aspx?f=255&MSPPError=-2147217396
    Regards
    D. Wu

  • Why can not find the G/L document when use mr8m reverse .

    Dear all,
    I want to reverse a document use MR8M trans code, but the message tell me the document is not exists. but I can find the document in FB03 . why?
    This document type is RE.
    Please help me.

    sorry ,the document is error.

  • Why I can not find my CoCd(Company code) when I Assign plant to company cod

    Hi All,
    In SPRO.
    I have defined my company in /Enterprise Structure/Definition/Financial Accounting/Define company.
    When I try to Assign plant to company code(/Enterprise Structure/Assignment/Logistics-General/Assign plant to company code). It reports my company code is not existing.
    Can someone tell me what's wrong. have I missed sth?
    Thanks and regards,
    Samson Zhu

    Plant will be copied Logistics->general -> Define, delete, copy check plant
    after defining and copying then you can assign this plant to company code as you specified.
    I think this will solve ur problem.
    Regards
    Ravi

Maybe you are looking for

  • My ipod touch has melted its charger?

    I have had my 4th gen ipod touch for about 6 months and have never had a problem with it. It was working as normal yesterday, and I plugged it in to charge overnight but when I woke up the plastic around the cable and the end of the charger had melte

  • Bleed Areas and PDF Export

    I set my book up in indesign and have all the bleed areas marked out.  When i export to a pdf it comes out fine, but when i export to a pdf  using the documents bleed settings i get an issue. On the two pages facing each other the inside edge of each

  • Difference between nio-file-manager  and nio-memory-manager

    Hi, what's the difference between nio-file-manager and nio-memory-manager? The documentation doesn't really discuss the differences as far as I know. They both use nio to store memory-mapped files don't they? What are the advantages/disadvantages of

  • Database is corrupt when trying to open Creative Suite 3 in Mavericks

    I backuped up my hardrive on my iMac i7 then erased the hard drive and repartitioned it so I could run 2 different operating systems.   I renstalled all my backup info on one of the partitions  and then upgradded ito OS X Mavericks.  When I went to o

  • Not enough disk space on imovie?

    i have imovie from the ilife '09 package. i make a lot of videos and upload them to youtube all of the time, but just recently i went to upload a 50 second video to youtube and it said "The operation could not be completed because there is not enough