I can not find NI cRIO-9076 in Remote System

I can not find NI cRIO-9076 in Remote System. How can i deal with it? The Status LED is on every couple seconds.

It must be activated before Apple's tracking system will recognize it. I just tried your SN and that was the message I got from https://selfsolve.apple.com/wcResults.do.
I suggest editing your post and removing the identifying information in it, as millions of people can read these forums and not all of them are completely honest.

Similar Messages

  • 10.5.5 update hangs panic msg. can not find driver for 7,2,5 system dualG5

    Down loaded 10.5.5 and ran it, loaded software and rebooted on G5 Dual 2Ghz system.
    10.5.4 worked no problem.
    Got back panic saying can not find driver for platform 7,2,5
    Anybody know how to back this update back to 10.5.4?
    or fix this to get 10.5.5 working.
    Thanks

    I am experiencing something very similar. After downloading the update, it closes all app's and attempts to install. I've been looking at a stalled progress bar for 30 minutes.... No error messages yet, but my prospects don't look good. Any advice?

  • HT4061 Why I can not find my iphone4S information in apple system?

    The system said this iphone serial number can not be found in the system. I just bought it in an Apple Store, Canada. Is it refurbished? Thanks.

    It must be activated before Apple's tracking system will recognize it. I just tried your SN and that was the message I got from https://selfsolve.apple.com/wcResults.do.
    I suggest editing your post and removing the identifying information in it, as millions of people can read these forums and not all of them are completely honest.

  • Can I find the OS of a remote system using LabVIEW?

    I wish to be able to start an application on a remote system using
    LabVIEW. To do this, I need to know what the OS of the remote system is
    (Windows, Linux, etc). I can ask the user to provide this information
    for me, but is there any way I can get LabVIEW to automatically
    retrieve this information? I know I can use the application node with
    the OS sub-section to get this information for the local machine... is
    there any way I can remotely run this? Would VI server allow me to run
    this, if I turned it into a VI, on the remote system such that I could
    retrieve this information for the remote system? Or is there a neater
    solution I'm missing?
    Cheers,
    M.J.

    Heya... many thanks for the suggestion(s).
    The problem with my case is there's any number of users on the network
    that might be using this, and it could be running on a Windows or Linux
    box, depending on user circumstances, so trying to get a VI Starter
    type application put into the start-up of all machines just in case is
    a) overkill & b) more than I want to bite off So basically I
    need to have the VI running on the machine in order to use VI server is
    what I'm hearing & reading from the help, which essentially my idea
    of dynamically firing off labview & loading/running any VI on the
    remote system just ain't possible... hmmmn.
    Back to the drawing board then, it looks like...
    Cheers,
    M.J.

  • Error - "Can not find Microsoft Word installed.."

    Hi,
    I downloaded RH6 demo to test it, but can't generate a
    printed documentation.
    When I try, I only get an error message
    "Can not find Microsoft Word installed on your system"
    I have no idea why this happens. First, in the layout
    settings I have set .pdf to be produced - DOC option is not
    checked.
    Also, MS Word is installed (Office 2003), and in Tools /
    Options / HTML Editors Word 2003 is listed, with a correct path to
    Winword.exe (which I reselected, just in case) .
    This happens on Windows Vista Ultimate edition, UAC off.
    Other layouts are generated normally.
    Any idea how to fix it?
    Thanks

    RH6 is not supported under Vista.
    I cover this in the article I wrote for Adobe's DevNet pages.
    http://www.adobe.com/devnet/robohelp/articles/get_started.html
    It is also covered in the Getting Started Guide that ships
    with the product. A soft copy can be found at
    http://www.adobe.com/support/robohelp/documentation.html
    See also Snippets on my site where there is a reference to a
    forum post about running RH6 under Vista.
    When you installed RH6 did it find Word on your system then?
    Did you install using your logon with admin rights attached?

  • I have reinstalled snow leopard 10.6.8 and want to restore my i photos from time machine. can not find iphoto libary in time machine, can"t not find home-pict. iphoto lib.  in time machine

    i have reinstalled snow leopard 10.6.8,  and want to restore my i photos from time machine. Can not find i-photo libary in time machine, can't not find > home-pict. iphoto lib.  in time machine. Please help.

    On my HD it does not say ,restore, in yourname -pict. Iphoto lib.,
    On the time machine, it , yourname etc, oes not show up at all.
    Only right side of TM, your name etc. does not show.

  • Help:Can not find the file in jar!

    Hello everyone:
    I build a project using Netbeans 5.0 and make a jar file with it...
    The code in the project as follows will throw an exception described that it can not find the file named datasource-config.xml
    String dataFilePath = getClass().getResource(dataFile).getPath();
    //System.out.println("filepath:"+dataFilePath);
    InputStream input = new FileInputStream(dataFilePath);
    when I run the project with the main() function as an entry it works perfectly and output:
    filepath:/C:/projects/java_project/search/build/classes/com/cn/wxjt/lucene/config/datasource-config.xml
    But when I compressed the project with jar and run it , it will show:
    filepath:file:/C:/projects/java_project/search/dist/search.jar!/com/cn/wxjt/lucene/config/datasource-config.xml
    there is a (!) between search.jar and /com/cn/wxjt...
    I dont know why I generate a ! symbol in the file path... Is it cause the exception->
    java.io.FileNotFoundException: file:\C:\projects\java_project\search\dist\search.jar!\com\cn\wxjt\lucene\config\datasource-config.xml
    If you have any idea, plz tell me.
    Thank you and best wishes to you !
    :)

    If the file you want to read is in your jar file, use
    getClass ().getResourceAsStream
    (relative_path_file_name)Hope that help,
    Jackhey jack i want to open the file as new File
    i m using this.getClass().getResource("resource/backend.xml");
    the resource is the directory inside the jar file.
    when i prints the url it shows:
    the jar file is in the WORK directory
    URL : jar:file:/home/neeraj/WORK/show.jar!/resource/backend.xml
    now when i creates new File using the url.getFile() method the file does not exist.
    although the same programs runs well when i uses the InputStream
    so plz tell me cant I create a new File from the above method????
    thanks in advance
    with regards
    neeraj

  • I can not find the messages in sxmb_moni in http to rfc scenarion

    hi i'm using http client tool when i send the message its working fine i'm getting the response, but i can not find that message in sxmb_moni in http to rfc scenario
    can anyone help me

    Hi lnaki vila
    I'm using pi 7.0 version
    i can see the other scenarios like SOAP to RFC, SOAP to IDOC,FILEto IDOC
    in sender side i'm not using any communication channel and adapter engine i'm just using http client tool for testing purpose
    i'm getting the response that's fine because its a synchronous communication
    i checked sxmb_adm in that -->integration configuration LOGGING parameter of category RUNTIME is set to  ENGINE_TYPE and current value is HUB(Integration server)
    thanks in advance
    regards
    Satish

  • Can not find "Work Folder" in windows server standard edition

    Guys, I have a testing lab and all is working with the exception of the fact that I can not find "work Folder" to install it.  I'm using windows server 2012 standard evaluation copy edition.  Normally work folder should be under >file
    and storage service>file and iSCSI services.  However, it is not there.  Can someone help please
    staphisco

    Hi,
    From the overview, Work Folder is not supported in Windows Server 2012 (only Windows Server 2012 R2). 
    Work Folders Overview
    http://technet.microsoft.com/en-us/library/dn265974.aspx
    Software requirements
    Work Folders has the following software requirements for file servers and your network infrastructure:
    A server running Windows Server 2012 R2 for hosting sync shares with user files 
    If you have any feedback on our support, please send to [email protected]

  • Can not find a library in Aperture after upgrading to Mavericks?

    I upgraded my Aperture to 3.5 on Mavericks. Since I have updated my Aperture, I cannot open my second Library "Aperture Library"
    This is what it happens:
    I can not find my "Aperture Library" photos, and when I try to switch between the library (File>Switch Libaries>"Aperture Library" this comes up:
    When I click on relaunch:Then when I click on "Aperture Library" and press chose, a 3 second process occurs and Aperture returns back to where it was when it was opened. The "Aperture Library" doesn't appear anywhere.
    When I go to Altinoz (My Mac) > Pictures > Aperture Library:
    When I try to open the Aperture Library folder in My Mac > Pictures > Aperture Library
    Do you want to import this library to Aperture (which was already in the old verison of Aperture)
    An error comes up:
    The library could not be imported because it is from an out of date version of Aperture 3. Please upgrade the library to the latest version of Aperture 3 and try again.
    I would really appreciate your help on helping me find "Aperture Library" Photos I have, since the upgrading to Mavericks really made annoying problems to me.

    It seems to me that you need Aperture 3.2.4 to open your library.
    If you have it then do the following:
    Uninstall Aperture 3.5
    Install Aperture 3.2.4
    Start Aperture and verify that you can access your library
    Update to Aperture 3.4.5
    Start Aperture and verify that you can access your library
    At the end update to Aperture 3.5 and upgrade your library
    If you don't have the older versions, maybe try to open the library in iPhoto. Does that work?

  • Can not find some messages in Mail using search

    I have some problems with Mail.app I can not find some messages in Mail using search, the strange thing is that sometimes mail search finds some messages, but after rebuilding spotlight index the search displays other messages with the all messages searched using same search criteria. I have also tried to delete Envelope index file from the Mail folder in usr/library and forced mail to import all mailboxes but it started to crash importing some of mailboxes - I deleted the messages from that mailboxes, imported remaining mailboxes and tried to rebuild mailbox, but everything without a successes. Any ideas how to solve it?

    Hi lnaki vila
    I'm using pi 7.0 version
    i can see the other scenarios like SOAP to RFC, SOAP to IDOC,FILEto IDOC
    in sender side i'm not using any communication channel and adapter engine i'm just using http client tool for testing purpose
    i'm getting the response that's fine because its a synchronous communication
    i checked sxmb_adm in that -->integration configuration LOGGING parameter of category RUNTIME is set to  ENGINE_TYPE and current value is HUB(Integration server)
    thanks in advance
    regards
    Satish

  • The Bluetooth low energy protocol is not backward compatible with classic Bluetooth protocol. My iPhone 4s can not find my sonny in-dash player. However my iPhone 3GS does it. Very disappointed with this. Any idea how it can be fixed???

    The Bluetooth low energy protocol is not backward compatible with classic Bluetooth protocol.
    My iPhone 4s can not find my sonny in-dash player. However my iPhone 3GS does it. Very disappointed with this.
    Any idea how it can be fixed??????

    Hello,
    You are correct, Blue tooth low engergy, BTLE.(only) devices are not backward compatible with Classic bluetooth and cannot connect.
    However the Apple 4S and above have Bluetooth 4.0 support.. Hardware wise it has bothClassic Bluetooth, like the 3GS, as well as Bluetooth Low Energy.  There is no good reason why your 4s cannot communicate to your Sony in-dash player using the Classic bluetooth that resides in the 4S.
    I know that this does not answer the why it does not work, but it should work. Do you have to somehow re-pair the new phone up to the player?  Not  knowing the model of the Sony it is hard to investigate.
    And I hate to ask but are you sure that the Bluetooth radio is on in the phone?
    JT

  • The "always allow" button is grayed out in settings regarding cookies, and I can not find where to change the setting.  (Restrictions are not on.)

    The "always allow" button is grayed out in settings regarding cookies, and I can not find where to change the setting.  (Restrictions are not on.)  Do you know where I go to change the setting to allow me to "always allow" cookies?

    Hi lisaarnett111,
    If you are having issues turning on Always Allow for cookies in Safari on your iPad, you may want to check to make sure that you don't have Private Browsing enabled, as noted in the following article:
    Turn Private Browsing on or off on your iPhone, iPad, or iPod touch - Apple Support
    Regards,
    - Brenden

  • How can I use iCloud-keychain if i can not find my country in the country code list?

    How can I use iCloud-keychain if i can not find my country in the country code list?

    Welcome to the Apple Community.
    If your country code does not appear in the list…
    Go to System Preferences > iCloud > Keychain and enter your Apple ID password (Settings > iCloud > Keychain, from a mobile device)
    Select the ‘Create Different Code’ option. (Mobile devices only)
    Select the advanced option and choose whether to create a random code or no code, selecting the later allows syncing across devices but not with Apple’s servers.

  • Can not find data in virtual cube

    Experts,
    I can not find data in virtual cube with services function module (copying Z_RS_BCT_FIGL_DATA_GET_VC10 from RS_BCT_FIGL_DATA_GET_VC10).The standard cube is maintained with data.
    Can anybody tell me what could be the reasons the data is coming through Virtua cube.
    Thanks,
    AK

    Hi,
    i_basic_infoprov is the name of the provider where the data is selected from. This must be a basic provider that contains data. What I meant was, create a copy of fm RS_BCT_FIGL_DATA_GET_VC,1 maybe as Z_BCT_FIGL_DATA_GET_VC1, and enter the name of this fm in the properties of your virtual cube. For that fm it might also be a good idea to enter a default value for i_infoprov. And this should be the name of your virtual cube.
    regards
    Siggi

Maybe you are looking for