I can not find the accept box for itunes terms and conditions.

It asks me to accept the iTunes terms and conditions. I am expecting to see an accept indicator to activate or check. But nothing. Pls help

OK? I just wanted to make sure because it is a family common mistake that other users have made in the past.
What are you trying to download - not that it really matters. Can you quit or clear put of what you are doing? Is there a cancel option?
Do you see a spinning wheel by any chance?

Similar Messages

  • HT4539 Where is the Accept button on iTunes terms and conditions

    WHereis the Accept  on iTunes Terms and Conditions

    In regards to IOS7, if your inquiries have led you here:
    I had the same issue where the "accept" button never showed up.
    I alleviated my issue by accident. I read a review that mentioned country bound issues.
    So I decided to go to the manage>change country link at the bottom of my iTunes account page.
    I changed it to the United States (even though I believe it was already set to that).
    Then once again I tried to download an app in iTunes and on my iPhone 4s, and it worked.
    I'm not sure if that was the issue, or if what I read about a massive influx of users attempting to use apple's servers or something like that was the problem. Either way, it works. I hope this works for you too, I know I was SUPERBLY frustrated after a day of the problem.
    P.S. I downloaded the IOS 7 before updating my itunes to 11.1.
    I think that caused the issue.
    My first step after encountering my issue was updating my itunes to 11.1.
    Then I tried to download an app and I accepted the terms and conditions on itunes instead of my phone.
    THEN I changed the country.
    PPS!! haha.
    I turned my iPhone off while I attempted to download an app post-country change.
    I'm not sure if that was important, but that's what I did.
    also, the apps downloaded after all this will be in cloud FYI. Just download them to your phone from App Center>updates>purchased
    Message was edited by: greensheeps

  • How do I get to the Submit box in itunes terms and conditions?

    Was trying to rent a movie, and the terms and conditions showed up  I checked the box, but my ibook screen won't scroll down far enough to hit the "submit" button.  Suggestions?

    iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
    iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device)

  • Error!! Can not find the delivery details for the delivery Id :

    hi all,
    I have a report which i need to burst in seven different reports wherein my delivery key is column "emp_id". Now when i schedule the report to burst then the report completes with a warning. I see that there are various delivery cycles for the report and for one of the cycles i get the following message
    Error!! Can not find the delivery details for the delivery Id :
    hence, what happens due to this is, even there are successful deliveries for other delivery ids but then i get only two rows of data in each of the seven bursted ouput xls files. wheareas the data runs in thousands of rows for each cycle.
    Hence whats happening is, that due to error /warning in one of the delivery cycles other reports are also not showing data.
    I am not sure whats causing the issue and why i am not getting complete bursted files out.
    Please suggest
    Thanks
    Ronny

    I guess, you are in 10.1.3.3.2 :),
    in the latest release 10.1.3.4.1, there are more enhancement wrto bursting and performance i believe.
    check th release notes
    can you send me the xml and bursting query you have, i can try simulating in my local.

  • Nternal ERROR: Can not find the ACL containter for object ...

    We are using OWB 10.2.0.3. We tried to introduce two basic roles to prevent user A from accessing certain parts of our project. Somehow (I cannot really say how) we ended up in the error message below whenever we want to modify the security properties of an object.
    Neither in metalink nor in the oracle forums I could find any hint about that error.
    Can anyone help??
    Thanks in advance, Maren
    Internal ERROR: Can not find the ACL containter for object:CMPMap@1ba11bc/id=2023180/owningFCO=2023180/proxyFor=(CMPMapGen@1a4d5c6/id=2023180/stname=CMPBatchMap/pname=LOAD_XML/lname=LOAD_XML/status=CLEAN/committed=true/persistent=true/propsLoaded=false)
    Internal ERROR: Can not find the ACL containter for object:CMPMap@1ba11bc/id=2023180/owningFCO=2023180/proxyFor=(CMPMapGen@1a4d5c6/id=2023180/stname=CMPBatchMap/pname=LOAD_XML/lname=LOAD_XML/status=CLEAN/committed=true/persistent=true/propsLoaded=false)
         at oracle.wh.repos.pdl.security.SecurityPolicyManager.getAccessCharMapOfPrivilegeOwner(SecurityPolicyManager.java:166)
         at oracle.wh.repos.impl.foundation.CMPElement.getAccessCharMapOfPrivilegeOwner(CMPElement.java:2743)
         at oracle.wh.repos.pdl.security.OWBSecurityImpl.hasPrivilege(OWBSecurityImpl.java:820)
         at oracle.wh.repos.pdl.security.OWBSecurityImpl.internalSecurityCheck(OWBSecurityImpl.java:1449)
         at oracle.wh.repos.pdl.security.OWBSecurityImpl.securityCheck(OWBSecurityImpl.java:649)
         at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:660)
         at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:623)
         at oracle.wh.ui.common.WhSecurityHelper.securityCheck(WhSecurityHelper.java:112)
         at oracle.wh.ui.console.commands.EditObjectCmd.performAction(EditObjectCmd.java:107)
         at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
         at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:189)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:478)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)

    Hi Maren
    Like you I get this error and do not know what steps caused it.In my scenario I have some mappings that give the error and some that do not - the repository user gets the error but the repository owner does not.
    Thinking back over the last number of months (as this project contains 7-8 months od work - we do have exports of the project) I think the ones giving the error are those that perhaps were copied from another to start the coding but I cannot be sure.
    I have read the metalink note mentioned above as well as the the queries posted by Oleg and yourself. The queries posted are slightly different, one has a where clause
    fco.classname = 'CMPACLContainer' (Maren's)
    and the other
    fco.classname='CMPMap' (Oleg's).
    Was this intentional Maren on your behalf for your problem to be fixed?
    We are using 10.2.0.3.33 OWB client and 10.2.0.3.0 OWB repository.
    Thanks
    Edwin

  • Suddenly all of my Office-programs have stopped working and will not launch on my MacBook. Could anyone give an amateur from Norway a hint of what may cause the problem? And I can not find the installation-disc for Office...Super! :)

    Suddenly all of my Office-programs have stopped working and will not launch on my MacBook. They were all already installed when I bought the computer. Could anyone give an amateur from Norway a hint of what may cause the problem? (And I can not find the installation-disc for the Office Programs...Super!)

    Have you contacted Microsoft support - http://www.microsoft.com/mac/support ? 

  • After iPhone connects to iTunes, can not find the photos tab for sync

    After iPhone connects to iTunes, can not find the photos tab for sync. Thus, I can not copy some phototes from my Macbook to iPhone, But my iTouch can do this. I don't know why.

    If you are using a mac, you use iphoto.
    If you are on windows, you use whatever camera software windows uses.
    Itunes does not import photos.

  • What do I do if I can not find the serial number for lightroom?

    What do I do if I can not find the serial number for lightroom?

    If youv'e already registered it, the My products and services page should have your serial number.

  • I can not adjust the automatic download for music, apps and books at the iPhone and the iPad. where is the mistake?

    I can not adjust the automatic download for music, apps and books.
    This is a problem by my iPhone and my IPad.
    Where is the mistake??

    Settings > Store > Change the settings you want.

  • Can i find the serial number for my ipad and mac book through my apple account/itunes?

    Can one find a serial number through itune/apple acount?

    Welcome to Apple Support Communities
    Of course. If you registered them to your Apple ID, open http://supportprofile.apple.com and log in with your Apple ID, so you will see their serial numbers

  • HT201359 Hi, it's incredibly frustrating to not be able to find an agree button for new terms and condition. Where do I actually do it?????? Thanks Jitka

    Hi where do I agree on terms and condition? The file is massive while not having the agree button. Very frustrating!!!

    You can see number of charging cycles in System Profiler , under Power.
    In regards to your battery/charger issues one thing - try to switch your computer off, take the battery out, and hold power button for 5 (10, just for a sake of it seconds.
    Then put battery back in, and try to charge it/power it up. It's amazing how many issues can this solve...
    Let us know!

  • I can not find the menu on new iTunes on my macbook to authorise my computer

    I need to authorise my macbook to my apple Id. Apple support told me to go onto itunes then into store menu but I cant find it anywhere. Ive searched everywhere for it and googled it but all are steps to help windows and not macbooks. Someone please help me authorise my computer.

    iTunes application window (not Finder or a browser) > menus at top >  Store menu > drag down to Authorize This Computer. (In earlier versions of iTunes, access this option from the Advanced menu).

  • I can not find the start icon to restart anywhere and it used to be here.

    Start icon used to be in lower left hand corner and also a side bar menu with start option on right side of screen.

    The Windows 8.1 start icon is hidden?
    If Firefox's toolbar area is not showing, Firefox might be in full screen view. The F11 key switches between regular and full screen view.
    If Firefox's toolbar area is visible but the Firefox window is too tall and is blocking the Windows Taskbar, you can try resizing the Firefox window. Press Alt+Spacebar to call up the "control menu" for the Firefox window, then click Size or type s, press the down arrow on the keyboard once, then press the up arrow key repeatedly until you can see the Taskbar, then press Enter.
    Does that help?

  • Where can i find the menu box for firefox

    i am trying to play games on pogo some of them will not load. when i go to find out why it says go to foxfire menu and i cant find t. please help me thanks

    What is the help article sending you to look at? This advice might be obsolete.
    Anyway, there are two menus in Firefox 34:
    * Application menu you open using the "3-bar" menu button on the right end of the main toolbar. To compare with the old Firefox menu from Firefox 4-28, see [http://jeffersonscher.com/res/menu/comp.php this page].
    * Optional menu bar (File, Edit, View...) which you can display if you like using one of these methods:
    ** right-click a blank area of the tab bar > Menu Bar
    ** right-click the "+" button on the tab bar > Menu Bar
    ** tap the Alt key to display the bar temporarily, then View > Toolbars > Menu Bar
    ** Use the Customize feature to access the Show/Hide Toolbars button (see: [[Customize Firefox controls, buttons and toolbars]])

  • How can I find the image file for iTunes album artwork?

    I know how to see the image, how to search for album artwork on the web, and how to save a new or different image. However, I want to be able to find specific images in Finder that are already connected with an album. I am not able to zero in on it. All I find is a collection of folders.

    These things accesible by control clicking (or right clicking with a multibutton mouse) are what are known as contextual menus and are incredibly powerful timesavers.  Try control clicking on things and see what you find. 

Maybe you are looking for

  • The listing of my calendars is gone

    I know this has happened before, because I found (and have since lost) a thread on it. I have recently migrated back to ical/address book/etc. - all mac PIMs - and it's not going well. The problem today is that, when I open iCal, it appears there's n

  • Error in Function Module

    Hi, I have a FM in 4.6 with the same code but on syntax check it doesnt give any error, but if i create the same in ECC 6.0 i'm gettinga an error staing tht "A target area must be declared either explicitly with an INTO clause or implicitly with a TA

  • Webservice for proxy to SOAP adapter interface

    Hi Experts, we have scenario Proxy to SOAP for this inteface is it possible to provide the webservice from PI side. if yes please let me know the steps. i know the process how to provide the webservice when the SOAP adapter at sender side. 1) through

  • Is it possibile to retrieve .nav from pdf portfolio?

    Hi all! There is any way to retrieve the .nav file from pdf portfolio? Is it possible? Thanks

  • Automating Goods Issue to PM Orders?

    Guys, do you know of any way of setting up automatic goods issue to PM orders? I.e. a background job that will post GI to PM orders once a day when stock is available? Regards, Kenneth