I can not find the safety-lock by internetbanking with firefox 4
I have downloaded Firefox 4. the newest version and with interbanking i have to control if i have the correct website of my bank. Under right of the page must be a safety-lock in the environment https://
The padlock has been replaced by the site identity button, for details on using it see https://support.mozilla.com/kb/Site+Identity+Button
Similar Messages
-
I replaced my hard drive and lost iPhoto. Is there a way to retrieve? I can not find the starter discs that came with my Macbook Pro.
Customer Service: Contacting Apple for support and service - this includes international calling numbers. You can purchase replacement discs from Apple.
Or, you can upgrade to Lion or Mountain Lion:
Upgrading from Snow Leopard to Lion or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
A. Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion - System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps.
For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.
B. Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply. -
most Of my purchased songs inb I tunes can not play because i tunes can not locate the orignal song.What can I do THANK YOU
most Of my purchased songs inb I tunes can not play because i tunes can not locate the orignal song.What can I do THANK YOU
-
Hi to the Mac Folks,
I have 10.6.8 and have installed two new printers HP 8610 and an Epson 7880 and can not find the Page Set-up menu anywhere in the applications I a trying to print from. This is regardless of either printer selected.
I primarily print photos from Photoshop CS5. The term Page Set-up has gone missing in the file pull down menu. Can't make any choices There are no page sizes, paper types, appearsto be locked on a 13x19 size paper format. Either being too large or too small.
Saw a 2008 locked issue about this however none of the help fit my situation, options discussed are not available to me.
Preview has no "Page Setup" - or does it?
Does the constant struggle with computer compatability weirdness issues ever end or is it a enslavement scheme?
WoodyHey,
if you know the name(s) of the root folder(s) you want to access (eg. by making a note on the Windows side) then you can make them appear by just doing Shift-Command-G in Finder ("Go to Folder…"), and entering the full path to the required folders. You can then navigate all the contents as normal.
HTH,
S. -
I can't find the Scroll Lock button on my notebook
was in a program when something happened to the box I had up on screen, was told to hit the scroll lock key, but I can't find the scroll lock key - can anybody help me??
This question was solved.
View Solution.Hi I was out in the world when I ran into the "No Scroll Lock" key / function on mt HP DVP Laptop. Really, HP could not add a ctrl + function key for this?
There is an easier solution than hooking an external keyboard, especially if you are not in the home/office.
USE THE WINDOWS ON SCREEN KEYBOARD! I found this on another post on the HP board. In Windows 7 you can easily find the On Screen Keyboard by pressing the windows globe on the bottom right corner that brings up your 'Start Menu" and type in "On Screen" in the search box at the bottom. You should see "On Screen Keyboard" app come up at the top. Alternately, go to Control Panel, Ease of Access, and you will see "Start On Screen Keyboard". Once enabled when you select the on screen application it comes right up. You can leave the on screen minimized at the bottom if you need to toggle Scroll Lock on and Off.
So there is a solution that does not include finding an external keyboard. But HP, this can't be a difficult thing to add to the bios, no? Like Alt + Fn Num Lock? -
HT201441 I can not find the previous owner and ask them the Apple ID!
what van I do if can not find the previous owner???
If you have bought a second-hand iPhone and the previous owner has locked it, only he can unlock it as indicated in the Help page you came here from. If you cannot contact him you will be unable to use the phone; there is no way round this.
-
Hello please tell me how you can unlock the phone I bought İclod worker can not find the old vledeltsa. sorry English is not good, I know
If it's locked to the previous owner's account then only he/she can remove it from their account : http://support.apple.com/kb/TS4515
-
Help:Can not find the file in jar!
Hello everyone:
I build a project using Netbeans 5.0 and make a jar file with it...
The code in the project as follows will throw an exception described that it can not find the file named datasource-config.xml
String dataFilePath = getClass().getResource(dataFile).getPath();
//System.out.println("filepath:"+dataFilePath);
InputStream input = new FileInputStream(dataFilePath);
when I run the project with the main() function as an entry it works perfectly and output:
filepath:/C:/projects/java_project/search/build/classes/com/cn/wxjt/lucene/config/datasource-config.xml
But when I compressed the project with jar and run it , it will show:
filepath:file:/C:/projects/java_project/search/dist/search.jar!/com/cn/wxjt/lucene/config/datasource-config.xml
there is a (!) between search.jar and /com/cn/wxjt...
I dont know why I generate a ! symbol in the file path... Is it cause the exception->
java.io.FileNotFoundException: file:\C:\projects\java_project\search\dist\search.jar!\com\cn\wxjt\lucene\config\datasource-config.xml
If you have any idea, plz tell me.
Thank you and best wishes to you !
:)If the file you want to read is in your jar file, use
getClass ().getResourceAsStream
(relative_path_file_name)Hope that help,
Jackhey jack i want to open the file as new File
i m using this.getClass().getResource("resource/backend.xml");
the resource is the directory inside the jar file.
when i prints the url it shows:
the jar file is in the WORK directory
URL : jar:file:/home/neeraj/WORK/show.jar!/resource/backend.xml
now when i creates new File using the url.getFile() method the file does not exist.
although the same programs runs well when i uses the InputStream
so plz tell me cant I create a new File from the above method????
thanks in advance
with regards
neeraj -
Can not find the the RBS tables after installing the Remote Blog Storage
Hi,
I am trying to configure the Remote Blob storage on my Sharepoint Server 2013. I am using the SQL Server Express 10.50.6000.
Everything is going fine, but I can not find the tables in the Database.
I am not sure where I did the wrong thing.
machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
but the installation is looking for some other.
Thanks in advance.
=== Verbose logging started: 3/23/2015 13:55:09 Build type: SHIP UNICODE 5.00.7601.00 Calling process: C:\Windows\system32\msiexec.exe ===
MSI (c) (44:F8) [13:55:09:000]: Resetting cached policy values
MSI (c) (44:F8) [13:55:09:000]: Machine policy value 'Debug' is 0
MSI (c) (44:F8) [13:55:09:000]: ******* RunEngine:
******* Product: RBS.msi
******* Action:
******* CommandLine: **********
MSI (c) (44:F8) [13:55:09:000]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (44:F8) [13:55:09:000]: Grabbed execution mutex.
MSI (c) (44:F8) [13:55:09:016]: Cloaking enabled.
MSI (c) (44:F8) [13:55:09:016]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (44:F8) [13:55:09:016]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (90:A4) [13:55:09:016]: Running installation inside multi-package transaction D:\RBS.msi
MSI (s) (90:A4) [13:55:09:016]: Grabbed execution mutex.
MSI (s) (90:34) [13:55:09:016]: Resetting cached policy values
MSI (s) (90:34) [13:55:09:016]: Machine policy value 'Debug' is 0
MSI (s) (90:34) [13:55:09:016]: ******* RunEngine:
******* Product: D:\RBS.msi
******* Action:
******* CommandLine: **********
MSI (s) (90:34) [13:55:09:031]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (90:34) [13:55:09:031]: Setting cached product context: User non-assigned for product: FB42F99F09B0E3646985F32DFE3C9C29
MSI (s) (90:34) [13:55:09:031]: Using cached product context: User non-assigned for product: FB42F99F09B0E3646985F32DFE3C9C29
MSI (s) (90:34) [13:55:09:031]: Setting cached product context: machine assigned for product: 000021599B0090400100000000F01FEC
115C834F46A5E33479CEE53534AD76A0
:34) [13:55:09:265]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:09:265]: Machine policy value 'DisableFlyWeightPatching' is 0
MSI (s) (90:34) [13:55:09:265]: Enabling baseline caching for this transaction since all active patches are MSI 3.0 style MSPs or at least one MSI 3.0 minor update patch is active
MSI (s) (90:34) [13:55:09:265]: APPCOMPAT: looking for appcompat database entry with ProductCode '{56D21E05-679B-40F2-94C1-DB0D7EB2E461}'.
MSI (s) (90:34) [13:55:09:265]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (90:34) [13:55:09:265]: Transforms are not secure.
MSI (s) (90:34) [13:55:09:265]: PROPERTY CHANGE: Adding MsiLogFileLocation property. Its value is 'D:\rbs_install_log.txt'.
MSI (s) (90:34) [13:55:09:265]: Command Line: TRUSTSERVERCERTIFICATE=true FILEGROUP=PRIMARY DBNAME=WSS_Content DBINSTANCE=jpntkyint01\sharepoint FILESTREAMFILEGROUP=RBSFilestreamProvider FILESTREAMSTORENAME=FilestreamProvider_1 CURRENTDIRECTORY=D:\ CLIENTUILEVEL=3 CLIENTPROCESSID=14660
MSI (s) (90:34) [13:55:09:265]: PROPERTY CHANGE: Adding PackageCode property. Its value is '{1AC68E73-94F1-4A01-B229-82B2F73C3326}'.
MSI (s) (90:34) [13:55:09:265]: Product Code passed to Engine.Initialize: '{56D21E05-679B-40F2-94C1-DB0D7EB2E461}'
MSI (s) (90:34) [13:55:09:265]: Product Code from property table before transforms: '{56D21E05-679B-40F2-94C1-DB0D7EB2E461}'
MSI (s) (90:34) [13:55:09:265]: Product Code from property table after transforms: '{56D21E05-679B-40F2-94C1-DB0D7EB2E461}'
MSI (s) (90:34) [13:55:09:265]: Product registered: entering maintenance mode
MSI (s) (90:34) [13:55:09:265]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:09:265]: Determined that existing product (either this product or the product being upgraded with a patch) is installed per-machine.
MSI (s) (90:34) [13:55:09:265]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:09:265]: Product {56D21E05-679B-40F2-94C1-DB0D7EB2E461} is admin assigned: LocalSystem owns the publish key.
MSI (s) (90:34) [13:55:09:265]: Product {56D21E05-679B-40F2-94C1-DB0D7EB2E461} is managed.
MSI (s) (90:34) [13:55:09:265]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:09:281]: MSI_LUA: Credential prompt not required, user is an admin
MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding ProductState property. Its value is '5'.
MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding ProductToBeRegistered property. Its value is '1'.
MSI (s) (90:34) [13:55:09:281]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:09:281]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:09:281]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3: 2
MSI (s) (90:34) [13:55:09:281]: Entering CMsiConfigurationManager::SetLastUsedSource.
MSI (s) (90:34) [13:55:09:281]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:09:281]: Specifed source is already in a list.
MSI (s) (90:34) [13:55:09:281]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (90:34) [13:55:09:281]: Machine policy value 'DisableBrowse' is 0
MSI (s) (90:34) [13:55:09:281]: Machine policy value 'AllowLockdownBrowse' is 0
MSI (s) (90:34) [13:55:09:281]: Adding new sources is allowed.
MSI (s) (90:34) [13:55:09:281]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:09:281]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:09:281]: Package name retrieved from configuration data: 'RBS.msi'
MSI (s) (90:34) [13:55:09:281]: Note: 1: 2262 2: AdminProperties 3: -2147287038
MSI (s) (90:34) [13:55:09:281]: Machine policy value 'DisableMsi' is 1
MSI (s) (90:34) [13:55:09:281]: Machine policy value 'AlwaysInstallElevated' is 0
MSI (s) (90:34) [13:55:09:281]: User policy value 'AlwaysInstallElevated' is 0
MSI (s) (90:34) [13:55:09:281]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:09:281]: Product {56D21E05-679B-40F2-94C1-DB0D7EB2E461} is admin assigned: LocalSystem owns the publish key.
MSI (s) (90:34) [13:55:09:281]: Product {56D21E05-679B-40F2-94C1-DB0D7EB2E461} is managed.
MSI (s) (90:34) [13:55:09:281]: Running product '{56D21E05-679B-40F2-94C1-DB0D7EB2E461}' with elevated privileges: Product is assigned.
MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding TRUSTSERVERCERTIFICATE property. Its value is 'true'.
MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Modifying FILEGROUP property. Its current value is 'default'. Its new value: 'PRIMARY'.
MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding DBNAME property. Its value is 'WSS_Content'.
MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding DBINSTANCE property. Its value is 'jpntkyint01\sharepoint'.
MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Modifying FILESTREAMFILEGROUP property. Its current value is 'default'. Its new value: 'RBSFilestreamProvider'.
MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding FILESTREAMSTORENAME property. Its value is 'FilestreamProvider_1'.
MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding CURRENTDIRECTORY property. Its value is 'D:\'.
MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding CLIENTUILEVEL property. Its value is '3'.
MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding CLIENTPROCESSID property. Its value is '14660'.
MSI (s) (90:34) [13:55:09:281]: Machine policy value 'DisableAutomaticApplicationShutdown' is 0
MSI (s) (90:34) [13:55:09:328]: PROPERTY CHANGE: Adding MsiRestartManagerSessionKey property. Its value is '489ffd242e95054781e9ce4b8d0b8aa5'.
MSI (s) (90:34) [13:55:09:328]: RESTART MANAGER: Session opened.
MSI (s) (90:34) [13:55:09:328]: TRANSFORMS property is now:
MSI (s) (90:34) [13:55:09:328]: PROPERTY CHANGE: Adding PRODUCTLANGUAGE property. Its value is '1033'.
MSI (s) (90:34) [13:55:09:328]: PROPERTY CHANGE: Adding VersionDatabase property. Its value is '300'.
MSI (s) (90:34) [13:55:09:328]: SHELL32::SHGetFolderPath returned: C:\Users\medsvradmin\AppData\Roaming
MSI (s) (90:34) [13:55:09:328]: SHELL32::SHGetFolderPath returned: C:\Users\medsvradmin\Favorites
Action ended 13:55:09: AppSearch. Return value 1.
Action start 13:55:09: ValidateProductID.
MSI (s) (90:34) [13:55:09:390]: Skipping action: Sqlmsirc_CheckLanguage_64 (condition is false)
MSI (s) (90:34) [13:55:09:390]: Doing action: CostInitialize
Action ended 13:55:09: ValidateProductID. Return value 1.
MSI (s) (90:34) [13:55:09:406]: Machine policy value 'MaxPatchCacheSize' is 10
MSI (s) (90:34) [13:55:09:406]: Baseline: Sorting baselines for {56D21E05-679B-40F2-94C1-DB0D7EB2E461}.
MSI (s) (90:34) [13:55:09:406]: Baseline: New baseline 10.50.1600 from transaction.
MSI (s) (90:34) [13:55:09:437]: Baseline: Sorted order Native: Order 0.
MSI (s) (90:34) [13:55:09:437]: Baseline Data Table:
MSI (s) (90:34) [13:55:09:437]: ProductCode: {56D21E05-679B-40F2-94C1-DB0D7EB2E461} Version: 10.50.1600 Attributes: 0 PatchId: Native BaselineId: -2147483648 Order: 0
MSI (s) (90:34) [13:55:09:437]: Baseline File Table:
MSI (s) (90:34) [13:55:09:437]: PROPERTY CHANGE: Adding ROOTDRIVE property. Its value is 'D:\'.
MSI (s) (90:34) [13:55:09:437]: PROPERTY CHANGE: Adding CostingComplete property. Its value is '0'.
MSI (s) (90:34) [13:55:09:453]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:09:453]: Note: 1: 2205 2: 3: Patch
MSI (s) (90:34) [13:55:09:453]: Note: 1: 2205 2: 3: PatchPackage
MSI (s) (90:34) [13:55:09:453]: Note: 1: 2205 2: 3: MsiPatchHeaders
MSI (s) (90:34) [13:55:09:453]: Note: 1: 2205 2: 3: __MsiPatchFileList
MSI (s) (90:34) [13:55:09:453]: Note: 1: 2205 2: 3: PatchPackage
MSI (s) (90:34) [13:55:09:453]: Note: 1: 2228 2: 3: PatchPackage 4: SELECT `DiskId`, `PatchId`, `LastSequence` FROM `Media`, `PatchPackage` WHERE `Media`.`DiskId`=`PatchPackage`.`Media_` ORDER BY `DiskId`
MSI (s) (90:34) [13:55:09:453]: Delta compression fallback method for this product transaction is 'MSI 2.0 legacy obsolescence'
MSI (s) (90:34) [13:55:09:453]: Note: 1: 2205 2: 3: Patch
Action start 13:55:09: CostInitialize.
MSI (s) (90:34) [13:55:09:453]: Doing action: FileCost
Action ended 13:55:09: CostInitialize. Return value 1.
MSI (s) (90:34) [13:55:09:468]: Note: 1: 2205 2: 3: Class
MSI (s) (90:34) [13:55:09:468]: Note: 1: 2205 2: 3: Extension
MSI (s) (90:34) [13:55:09:468]: Note: 1: 2205 2: 3: TypeLib
Action start 13:55:09: FileCost.
MSI (s) (90:34) [13:55:09:468]: Doing action: IsolateComponents
Action ended 13:55:09: FileCost. Return value 1.
Action start 13:55:09: IsolateComponents.
MSI (s) (90:34) [13:55:09:468]: Doing action: CostFinalize
GE: Adding ClientDir1025 property. Its value is 'C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Client Library\ar\'.
MSI (s) (90:34) [13:55:09:593]: PROPERTY CHANGE: Modifying ServerDir property. Its current value is 'C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Server'. Its new value: 'C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Server\'.
MSI (s) (90:34) [13:55:09:593]: PROPERTY CHANGE: Modifying Eula1033 property. Its current value is 'C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\1033'. Its new value: 'C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\1033\'.
MSI (s) (90:34) [13:55:09:593]: Target path resolution complete. Dumping Directory table...
MSI (s) (90:34) [13:55:09:593]: Note: target paths subject to change (via custom actions or browsing)
MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: TARGETDIR , Object: D:\
MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: WindowsFolder , Object: C:\Windows\
MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: ProgramFiles64Folder , Object: C:\Program Files\
MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: INSTALLDIR , Object: C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\
MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: GAC , Object: C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\
MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: ClientDir , Object: C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Client Library\
MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: ClientDir3082 , Object: C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Client Library\es\
MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: ClientDir1025 , Object: C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Client Library\ar\
MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: ServerDir , Object: C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Server\
MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: Eula1033 , Object: C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\1033\
MSI (s) (90:34) [13:55:09:593]: Doing action: IsDotNet20Or40Installed
Action ended 13:55:09: CostFinalize. Return value 1.
MSI (s) (90:34) [13:55:09:593]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'IsDotNet20Or40Installed'
MSI (s) (90:34) [13:55:09:609]: Creating MSIHANDLE (1) of type 790542 for thread 9268
MSI (s) (90:6C) [13:55:09:609]: Invoking remote custom action. DLL: C:\Windows\Installer\MSIB261.tmp, Entrypoint: IsDotNetFramework20Or40Installed
MSI (s) (90:FC) [13:55:09:609]: Generating random cookie.
MSI (s) (90:FC) [13:55:09:609]: Created Custom Action Server with PID 14944 (0x3A60).
MSI (s) (90:D0) [13:55:09:640]: Running as a service.
MSI (s) (90:D0) [13:55:09:640]: Hello, I'm your 64bit Impersonated custom action server.
MSI (s) (90!08) [13:55:09:640]: PROPERTY CHANGE: Adding DOTNETCOREPATH property. Its value is '1'.
MSI (s) (90!08) [13:55:09:640]: PROPERTY CHANGE: Adding IsDotNet20Or40Installed property. Its value is '1'.
MSI (s) (90:6C) [13:55:09:640]: Closing MSIHANDLE (1) of type 790542 for thread 9268
One or more .NET Framework assemblies found in MsiAssembly table require the GAC, need to check for the .NET Framework
MSI (s) (90:34) [13:55:09:640]: Skipping action: CA_ErrorPrereqDotNet20Or40 (condition is false)
MSI (s) (90:34) [13:55:09:640]: Doing action: SqlFollowComponentsValidate_Redist_64
Action ended 13:55:09: IsDotNet20Or40Installed. Return value 1.
MSI (s) (90:34) [13:55:09:640]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SqlFollowComponentsValidate_Redist_64'
MSI (s) (90:34) [13:55:09:687]: Creating MSIHANDLE (11) of type 790542 for thread 9268
MSI (s) (90:04) [13:55:09:687]: Invoking remote custom action. DLL: C:\Windows\Installer\MSIB281.tmp, Entrypoint: SqlFollowComponentsValidate
Action start 13:55:10: InstallServices.
MSI (s) (90:34) [13:55:10:498]: Doing action: StartServices
Action ended 13:55:10: InstallServices. Return value 1.
MSI (s) (90:34) [13:55:10:498]: Note: 1: 2205 2: 3: ServiceControl
MSI (s) (90:34) [13:55:10:498]: Note: 1: 2228 2: 3: ServiceControl 4: SELECT `Name`,`Wait`,`Arguments`,`Event`, `Action` FROM `ServiceControl`, `Component` WHERE `Component_` = `Component` AND (`Action` = 0 OR `Action` = 1 OR `Action` = 2)
Action start 13:55:10: StartServices.
MSI (s) (90:34) [13:55:10:498]: Doing action: RegisterUser
Action ended 13:55:10: StartServices. Return value 1.
Action start 13:55:10: RegisterUser.
MSI (s) (90:34) [13:55:10:498]: Doing action: RegisterProduct
Action ended 13:55:10: RegisterUser. Return value 0.
MSI (s) (90:34) [13:55:10:498]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:10:498]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
Action start 13:55:10: RegisterProduct.
MSI (s) (90:34) [13:55:10:498]: Doing action: PublishComponents
Action ended 13:55:10: RegisterProduct. Return value 1.
MSI (s) (90:34) [13:55:10:498]: Note: 1: 2205 2: 3: PublishComponent
MSI (s) (90:34) [13:55:10:498]: Note: 1: 2228 2: 3: PublishComponent 4: SELECT `PublishComponent`.`ComponentId`, `PublishComponent`.`Qualifier`, `PublishComponent`.`AppData`, `Feature`, `Component`.`ComponentId`, `Component`.`RuntimeFlags` FROM `PublishComponent`, `Component`, `Feature` WHERE `PublishComponent`.`Component_` = `Component`.`Component` AND `PublishComponent`.`Feature_` = `Feature`.`Feature` AND ((`Feature`.`Action` = 1 OR `Feature`.`Action` = 2) OR (`Feature`.`Action` = 4 AND `Feature`.`Installed` = 0) OR (`Feature`.`Action` = 3 AND (`Feature`.`Installed` = 1 OR `Feature`.`Installed` = 2 OR `Feature`.`Installed` = 4)))
Action start 13:55:10: PublishComponents.
MSI (s) (90:34) [13:55:10:498]: Doing action: MsiPublishAssemblies
Action ended 13:55:10: PublishComponents. Return value 0.
Action start 13:55:10: MsiPublishAssemblies.
MSI (s) (90:34) [13:55:10:498]: Doing action: PublishFeatures
Action ended 13:55:10: MsiPublishAssemblies. Return value 1.
MSI (s) (90:34) [13:55:10:498]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:10:498]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
Action start 13:55:10: PublishFeatures.
MSI (s) (90:34) [13:55:10:498]: Doing action: PublishProduct
Action ended 13:55:10: PublishFeatures. Return value 1.
MSI (s) (90:34) [13:55:10:513]: Resolving source to launched-from source.
MSI (s) (90:34) [13:55:10:513]: Setting launched-from source as last-used.
MSI (s) (90:34) [13:55:10:513]: PROPERTY CHANGE: Adding SourceDir property. Its value is 'D:\'.
MSI (s) (90:34) [13:55:10:513]: PROPERTY CHANGE: Adding SOURCEDIR property. Its value is 'D:\'.
MSI (s) (90:34) [13:55:10:513]: PROPERTY CHANGE: Adding SourcedirProduct property. Its value is '{56D21E05-679B-40F2-94C1-DB0D7EB2E461}'.
MSI (s) (90:34) [13:55:10:513]: SOURCEDIR ==> D:\
MSI (s) (90:34) [13:55:10:513]: SOURCEDIR product ==> {56D21E05-679B-40F2-94C1-DB0D7EB2E461}
MSI (s) (90:34) [13:55:10:529]: SECREPAIR: CryptAcquireContext succeeded
MSI (s) (90:34) [13:55:10:529]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:10:529]: Determining source type
MSI (s) (90:34) [13:55:10:529]: Source type from package 'RBS.msi': 2
MSI (s) (90:34) [13:55:10:529]: SECREPAIR: Hash Database: C:\Windows\Installer\SourceHash{56D21E05-679B-40F2-94C1-DB0D7EB2E461}
MSI (s) (90:34) [13:55:10:623]: SECREPAIR: Hash Value for the file:RBS.msi matched
MSI (s) (90:34) [13:55:10:623]: Source path resolution complete. Dumping Directory table...
MSI (s) (90:34) [13:55:10:623]: Dir (source): Key: TARGETDIR , Object: D:\ , LongSubPath: , ShortSubPath:
MSI (s) (90:34) [13:55:10:623]: Dir (source): Key: WindowsFolder , Object: D:\ , LongSubPath: , ShortSubPath:
MSI (s) (90:34) [13:55:10:623]: Dir (source): Key: ProgramFiles64Folder , Object: D:\ , LongSubPath: Program Files\ , ShortSubPath: PFiles\
MSI (s) (90:34) [13:55:10:623]: Dir (source): Key: INSTALLDIR , Object: D:\ , LongSubPath: Program Files\Microsoft SQL Remote Blob Storage 10.50\ , ShortSubPath: PFiles\jfw2d1_t\
MSI (s) (90:34) [13:55:10:623]: Dir (source): Key: Eula3082 , Object: D:\ , LongSubPath: Program Files\Microsoft SQL
MSI (s) (90:34) [13:55:10:623]: Dir (source): Key: DocsDir , Object: D:\ , LongSubPath: Program Files\Microsoft SQL Remote Blob Storage 10.50\Documentation\ , ShortSubPath: PFiles\jfw2d1_t\gsutoqfr\
MSI (s) (90:34) [13:55:10:623]: Dir (source): Key: MaintainerDir , Object: D:\ , LongSubPath: Program Files\Microsoft SQL Remote Blob Storage 10.50\Maintainer\ , ShortSubPath: PFiles\jfw2d1_t\jygjogya\
Files\jfw2d1_t\g-pfawke\pt-PT\
MSI (s) (90:34) [13:55:10:623]: Dir (source): Key: ClientDir2052 , Object: D:\ , LongSubPath: Program Files\Microsoft SQL Remote Blob Storage 10.50\Client Library\zh-CHS\ , ShortSubPath: PFiles\jfw2d1_t\g-pfawke\zh-CHS\
Action ended 13:55:10: PublishProduct. Return value 1.
MSI (s) (90:34) [13:55:10:638]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:10:638]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:10:638]: Note: 1: 2205 2: 3: Shortcut
MSI (s) (90:34) [13:55:10:638]: Note: 1: 2228 2: 3: Shortcut 4: SELECT `Shortcut`,`Name`, `FileName`, `Component`.`Directory_`, `Arguments`, `WkDir`, `Icon_`, `IconIndex`, `Hotkey`, `ShowCmd`, `Shortcut`.`Description`, `Shortcut`.`Directory_`, `Component`.`RuntimeFlags`, `Component`.`Action`, `Target`, `ComponentId`, `Feature`.`Action`, `Component`.`Installed`, `DisplayResourceDLL`, `DisplayResourceId`, `DescriptionResourceDLL`, `DescriptionResourceId` From `Shortcut`, `Feature`, `Component`, `File` WHERE `Target` = `Feature` AND `Shortcut`.`Component_` = `Component` AND `Component`.`KeyPath` = `File`.`File` AND ((`Feature`.`Action` = 1 OR `Feature`.`Action` = 2) OR (`Feature`.`Action` = 4 AND `Feature`.`Installed` = 0) OR (`Feature`.`Action` = 3 AND (`Feature`.`Installed` = 1 OR `Feature`.`Installed` = 2 OR `Feature`.`Installed` = 4)) OR (`Feature`.`Action` = NULL AND (`Component`.`Action` = 1 OR `Component`.`Action` = 2) AND (`Feature`.`Installed` = 1 OR `Feature`.`Installed` = 2 OR `Feature`.`Installed` = 4)))
Action start 13:55:10: CreateShortcuts.
MSI (s) (90:34) [13:55:10:638]: Doing action: FixCounters
Action ended 13:55:10: CreateShortcuts. Return value 0.
MSI (s) (90:34) [13:55:10:638]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'FixCounters'
Return value 0.
Action ended 13:55:20: INSTALL. Return value 1.
Property(S): DiskPrompt = [1]
Property(S): InstallMode = Typical
Property(S): DOTNET20SP = #2
Property(S): DOTNET35SP = #1
Property(S): DBINSTANCEREGISTRY = SHAREPOINT
Property(S): DBNAMEREGISTRY = WSS_Content
Property(S): FILESTREAMSTORENAMEREGISTRY = FilestreamProvider_1
Property(S): SCHEMASUFFIXREGISTRY = <suffix>
Property(S): WelcomeBmp = WelcomeBmp
Property(S): TRUSTSERVERCERTIFICATE = true
Property(S): SCHEDULEMAINTAINERTASK = 1
Property(S): MAINTAINERGC = GarbageCollection
Property(S): MAINTAINERREFSCAN = r
Property(S): MAINTAINERDELETE = d
Property(S): MAINTAINERORPHAN = o
Property(S): MAINTAINERCONSISTENCY = ConsistencyCheck
Property(S): MAINTAINERCONSISTENCYREPAIR = true
Property(S): OPENREADME = 1
Property(S): FilestreamPoolTranLifetimeUnit = time
Property(S): TEXTFILEVALUE = 0
Property(S): CONSOLEVALUE = 0
Property(S): DBTABLEVALUE = 0
Property(S): EVENTLOGVALUE = 4
Property(S): DBINSTANCE = jpntkyint01\sharepoint
Property(S): DBNAME = WSS_Content
Property(S): FILEGROUP = PRIMARY
Property(S): INTEGRATEDSECURITY = 1
Property(S): DBUSERNAME = username
Property(S): DBPASSWORD = **********
Property(S): FSDBINSTANCE = jpntkyint01\sharepoint
Property(S): FSDBNAME = WSS_Content
Property(S): FILESTREAMMETADATAFILEGROUP = PRIMARY
Property(S): FILESTREAMFILEGROUP = RBSFilestreamProvider
Property(S): FILESTREAMSTORENAME = FilestreamProvider_1
Property(S): SCHEMASUFFIX = <suffix>
Property(S): FILESTREAMTRANPOOLSIZE = 5
Property(S): FilestreamPoolTranLifetimeTime = 00:01:00
Property(S): FilestreamPoolTranLifetimeDays = 01
Property(S): FILESTREAMMAXPOOLSIZE = 200000
Property(S): FILESTREAMMAXSIZEINBANDWRITE = 1258290
Property(S): FILESTREAMMAXSIZEINBANDREAD = 1258290
Property(S): FILESTREAMMAXSIZEINLINEBLOB = 61140
Property(S): FILESTREAMWRITEALLOCATIONSIZE = 0
Property(S): MAINTAINERDURATION = 120
Property(S): SQLServerText1 = 0
Property(S): SQLServerVersionText3 = 0
Property(S): _IsMaintenance2 = Modify
Property(S): ModifyIcon = ModifyIco
Property(S): RepairIcon = RepairIco
Property(S): RemoveIcon = RemoveIco
Property(S): ErrorIcon = ErrorIco
Property(S): TARGETDIR = D:\
Property(S): USERNAME = Windows User
Property(S): _IsMaintenance = Reinstall
Property(S): AgreeToLicense = No
Property(S): Interrupted = 0
Property(S): SetupIcon = SetupIco
Property(S): Installed = 00:00:00
Property(S): CreateFilesNoUI = C:\Windows\system32\;D:\RBS.msi
Property(S): FixLogConfig = 4;0;0;0;0
Property(S): FixRemoteFilestreamStoreConfig = remotefilestream;C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Provider Libraries\Filestream Provider\RemoteFilestreamProviderConfiguration.xml
Property(S): FixFilestreamStoreConfig = filestream;C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Provider Libraries\Filestream Provider\FilestreamProviderConfiguration.xml
Property(S): RegisterProviderFile = RegisterFilestreamProvider.sql
Property(S): FILESTREAMTRANPOOLTRANLIFETIME = time 00:01:00
Property(S): IsDotNet20Or40Installed = 1
Property(S): ProgramMenuFolder.Sql = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
Property(S): SAPBINOTEPAD = Notepad.exe
Property(S): MaintainerDir1025 = C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Maintainer\ar\
Property(S): ClientDir3082 = C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Client Library\es\
Property(S): FilestreamDir1025 = C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Provider Libraries\Filestream Provider\ar\
Property(S): ProviderDir = C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Provider Libraries\
Property(S): Eula3082 = C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\3082\
Property(S): ProgramFiles64Folder = C:\Program Files\
Property(S): SourceDir = D:\
Property(S): VersionNT = 601
Property(S): Privileged = 1
Property(S): Manufacturer = Microsoft Corporation
Property(S): ProductCode = {56D21E05-679B-40F2-94C1-DB0D7EB2E461}
Property(S): ProductLanguage = 1033
Property(S): ProductName = SQL Server 2008 R2 Remote Blob Store
Property(S): ProductVersion = 10.50.1600.1
Property(S): UpgradeCode = {BA2FF55A-725F-40E5-956E-D08AD0B8175B}
Property(S): ProductShortName = Remote Blob Store
Property(S): PlatformExtension = _64
Property(S): PlatformId = x64
Property(S): AppGuidRegKey = Redist_Uninstall_RegKey
Property(S): ARPPRODUCTICON = ARPIco
Property(S): ARPHELPLINK = http://www.microsoft.com/sqlserver
Property(S): PIDTemplate = 53934<````=````=````=````=`````>@@@@@
Property(S): PROMPTROLLBACKCOST = P
Property(S): INSTALLLEVEL = 100
Property(S): ALLUSERS = 1
Property(S): SuccessIcon = SuccessIco
Property(S): WarningIcon = WarningIco
Property(S): LicenseIcon = LicenseIco
Property(S): CompleteIcon = CompleteIco
Property(S): CustomIcon = CustomIco
Property(S): NewIcon = NewIco
Property(S): UpIcon = UpIco
Property(S): DialogBanner = BannerBmp
Property(S): Details = 0
Property(S): ReinstallModeText = omus
Property(S): Display_IsBitmapDlg = 1
Property(S): ProductID = none
Property(S): ISENABLEDWUSFINISHDIALOG = 1
Property(S): SQLServerVersionText1 = 0
Property(S): SQLServerVersionText2 = 0
Property(S): CA_ERRORCOUNT = 0
Property(S): CA_WARNINGCOUNT = 0
Property(S): CA_SUCCESSCOUNT = 0
Property(S): UI_SHOWCOPYRIGHT = yes
Property(S): ShowUserRegistrationDlg = 1
Property(S): ButtonTextStyle = {\ButtonTextStyle}
Property(S): DlgTextStyle = {\DlgTextStyle}
Property(S): DlgTextStyleB = {\DlgTextStyleB}
Property(S): DlgTitleStyle = {\DlgTitleStyle}
Property(S): DlgTitleStyleB = {\DlgTitleStyleB}
Property(S): FixedStyle = {\FixedStyle}
Property(S): Error_UninstallDependant = 1
Property(S): DefaultUIFont = Tahoma8
Property(S): ProductFeaturesDefined = 1
Property(S): RBSRegistryKey = Software\Microsoft\Remote Blob Storage
Property(S): SCHEMASUFFIXVALID = 0
Property(S): EnableCustomConfigDlg = 1
Property(S): EnableCustomRemoveDlg = 1
Property(S): EnableDotNetCheck = 1
Property(S): FXAssemblyVersion = 2.0.0.0
Property(S): VSAssemblyVersion = 8.0.0.0
Property(S): EnableFeatureDlg = 1
Property(S): MaintenanceWelcomeDlg_Next = MaintenanceTypeDlg
Property(S): ReadyToRemoveDlg_Back = MaintenanceTypeDlg
Property(S): CustomerInfoDlg_Next = ReadyToInstallDlg
Property(S): CustomerInfoDlg_Back = LicenseAgreementDlg
Property(S): ReadyToInstallDlg_NotInstalled_Back = CustomerInfoDlg
Property(S): ReadyToInstallDlg_Installed_Back = MaintenanceTypeDlg
Property(S): InstallWelcomeDlg_Next = LicenseAgreementDlg
Property(S): LicenseAgreementDlg_Back = InstallWelcomeDlg
Property(S): LicenseAgreementDlg_Next = CustomerInfoDlg
Property(S): ModuleID_REDISTBASE = SQLBASE_Redist_64
Property(S): ErrorDialog = ErrorDlg
Property(S): MsiLogFileLocation = D:\rbs_install_log.txt
Property(S): PackageCode = {1AC68E73-94F1-4A01-B229-82B2F73C3326}
Property(S): ProductState = 5
Property(S): ProductToBeRegistered = 1
Property(S): CURRENTDIRECTORY = D:\
Property(S): CLIENTUILEVEL = 3
Property(S): CLIENTPROCESSID = 14660
Property(S): PRODUCTLANGUAGE = 1033
Property(S): VersionDatabase = 300
Property(S): VersionMsi = 5.00
Property(S): VersionNT64 = 601
Property(S): WindowsBuild = 7601
Property(S): ServicePackLevel = 1
Property(S): ServicePackLevelMinor = 0
Property(S): MsiNTProductType = 3
Property(S): WindowsFolder = C:\Windows\
Property(S): WindowsVolume = C:\
Property(S): System64Folder = C:\Windows\system32\
Property(S): SystemFolder = C:\Windows\SysWOW64\
Property(S): RemoteAdminTS = 1
Property(S): TempFolder = C:\Users\MEDSVR~1\AppData\Local\Temp\
Property(S): ProgramFilesFolder = C:\Program Files (x86)\
Property(S): CommonFilesFolder = C:\Program Files (x86)\Common Files\
Property(S): CommonFiles64Folder = C:\Program Files\Common Files\
Property(S): AppDataFolder = C:\Users\medsvradmin\AppData\Roaming\
Property(S): FavoritesFolder = C:\Users\medsvradmin\Favorites\
Property(S): NetHoodFolder = C:\Users\medsvradmin\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
Property(S): PersonalFolder = C:\Users\medsvradmin\Documents\
Property(S): PrintHoodFolder = C:\Users\medsvradmin\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
Property(S): RecentFolder = C:\Users\medsvradmin\AppData\Roaming\Microsoft\Windows\Recent\
Property(S): SendToFolder = C:\Users\medsvradmin\AppData\Roaming\Microsoft\Windows\SendTo\
Property(S): TemplateFolder = C:\ProgramData\Microsoft\Windows\Templates\
Property(S): CommonAppDataFolder = C:\ProgramData\
Property(S): LocalAppDataFolder = C:\Users\medsvradmin\AppData\Local\
Property(S): MyPicturesFolder = C:\Users\medsvradmin\Pictures\
Property(S): AdminToolsFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
Property(S): StartupFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
Property(S): ProgramMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
Property(S): StartMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\
Property(S): DesktopFolder = C:\Users\Public\Desktop\
Property(S): FontsFolder = C:\Windows\Fonts\
Property(S): GPTSupport = 1
Property(S): OLEAdvtSupport = 1
Property(S): ShellAdvtSupport = 1
Property(S): MsiAMD64 = 6
Property(S): Msix64 = 6
Property(S): Intel = 6
Property(S): PhysicalMemory = 8192
Property(S): VirtualMemory = 6311
Property(S): AdminUser = 1
Property(S): MsiTrueAdminUser = 1
Property(S): LogonUser = medsvradmin
Property(S): UserSID = S-1-5-21-300911508-3398273753-3262312657-1000
Property(S): UserLanguageID = 1033
Property(S): ComputerName = JPNTKYINT01
Property(S): SystemLanguageID = 1033
Property(S): ScreenX = 1024
Property(S): ScreenY = 768
Property(S): CaptionHeight = 19
Property(S): BorderTop = 1
Property(S): BorderSide = 1
Property(S): TextHeight = 16
Property(S): TextInternalLeading = 3
Property(S): ColorBits = 32
Property(S): TTCSupport = 1
Property(S): Time = 13:55:20
Property(S): Date = 3/23/2015
Property(S): MsiNetAssemblySupport = 4.0.30319.34209
Property(S): MsiWin32AssemblySupport = 6.1.7601.17514
Property(S): RedirectedDllSupport = 2
Property(S): MsiRunningElevated = 1
Property(S): DATABASE = C:\Windows\Installer\6847f.msi
Property(S): OriginalDatabase = D:\RBS.msi
Property(S): UILevel = 2
Property(S): ACTION = INSTALL
Property(S): ROOTDRIVE = D:\
Property(S): CostingComplete = 1
Property(S): OutOfDiskSpace = 0
Property(S): OutOfNoRbDiskSpace = 0
Property(S): PrimaryVolumeSpaceAvailable = 0
Property(S): PrimaryVolumeSpaceRequired = 0
Property(S): PrimaryVolumeSpaceRemaining = 0
Property(S): DOTNETCOREPATH = 1
Property(S): SourcedirProduct = {56D21E05-679B-40F2-94C1-DB0D7EB2E461}
Property(S): SOURCEDIR = D:\
MSI (s) (90:34) [13:55:20:201]: Note: 1: 1728
MSI (s) (90:34) [13:55:20:201]: Product: SQL Server 2008 R2 Remote Blob Store -- Configuration completed successfully.
MSI (s) (90:34) [13:55:20:201]: Windows Installer reconfigured the product. Product Name: SQL Server 2008 R2 Remote Blob Store. Product Version: 10.50.1600.1. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error status: 0.
MSI (s) (90:34) [13:55:20:217]: Deferring clean up of packages/files, if any exist
MSI (s) (90:34) [13:55:20:217]: MainEngineThread is returning 0
MSI (s) (90:A4) [13:55:20:217]: RESTART MANAGER: Session closed.
MSI (s) (90:A4) [13:55:20:217]: No System Restore sequence number for this installation.
=== Logging stopped: 3/23/2015 13:55:20 ===
MSI (s) (90:A4) [13:55:20:217]: User policy value 'DisableRollback' is 0
MSI (s) (90:A4) [13:55:20:217]: Machine policy value 'DisableRollback' is 0
MSI (s) (90:A4) [13:55:20:217]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (90:A4) [13:55:20:217]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (90:A4) [13:55:20:217]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (90:A4) [13:55:20:217]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (90:A4) [13:55:20:217]: Restoring environment variables
MSI (s) (90:A4) [13:55:20:217]: Destroying RemoteAPI object.
MSI (s) (90:FC) [13:55:20:233]: Custom Action Manager thread ending.
MSI (c) (44:F8) [13:55:20:233]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (44:F8) [13:55:20:233]: MainEngineThread is returning 0
=== Verbose logging stopped: 3/23/2015 13:55:20 ===I copied and pasted the strips from SSMS in another computer
CREATE
TABLE [dbo].[Taxonomy](
[fish_id] [numeric](38, 0)
IDENTITY(1,1)
NOT NULL,
[fish_order] [varchar](50)
NOT NULL,
[fish_family] [varchar](50)
NOT NULL,
[fish_genus] [varchar](50)
NOT NULL,
[fish_species] [varchar](50)
NOT NULL,
CONSTRAINT
[Taxonomy_pk] PRIMARY
KEY CLUSTERED
[fish_id] ASC
)WITH
(PAD_INDEX
= OFF,
STATISTICS_NORECOMPUTE =
OFF,
IGNORE_DUP_KEY =
OFF, ALLOW_ROW_LOCKS
= ON,
ALLOW_PAGE_LOCKS =
ON)
ON [PRIMARY]
ON [PRIMARY] -
In my network I have a Mac mini, AirPort Extreme base station and a Netgear ReadyNAS Duo v2. Everything is connected by cable. The problem is that the Mac mini can not find the NAS. Mac mini is looking for wirelessly connected devices, type TimeCapsule. How do I get my Mac mini to find the NAS and set the NAS as a source of data storage?
I have a ReadyNAS and use it as a Time Machine destination with no problems, even over WiFi. The ReadyNAS and Mac are both on the same LAN (even though the Mac is on WiFi), please check to see if your WiFi is on a different LAN to the Ethernet side of things, I have my Airport set to bridging mode so both sides of the AirPort count as the same LAN.
Next you need to check you have actually configured Time Machine in the ReadyNAS, as shipped it is initially turned off. You need to go to the ReadyNAS web management interface (FrontView) and then click on Backup on the left, and then select Time Machine. You also need to make sure Bonjour is enabled for the ReadyNAS, this is accessed by clicking on Services on the left and then selecting Discovery Services, make sure all the Bonjour options are ticked on. -
Error!! Can not find the delivery details for the delivery Id :
hi all,
I have a report which i need to burst in seven different reports wherein my delivery key is column "emp_id". Now when i schedule the report to burst then the report completes with a warning. I see that there are various delivery cycles for the report and for one of the cycles i get the following message
Error!! Can not find the delivery details for the delivery Id :
hence, what happens due to this is, even there are successful deliveries for other delivery ids but then i get only two rows of data in each of the seven bursted ouput xls files. wheareas the data runs in thousands of rows for each cycle.
Hence whats happening is, that due to error /warning in one of the delivery cycles other reports are also not showing data.
I am not sure whats causing the issue and why i am not getting complete bursted files out.
Please suggest
Thanks
RonnyI guess, you are in 10.1.3.3.2 :),
in the latest release 10.1.3.4.1, there are more enhancement wrto bursting and performance i believe.
check th release notes
can you send me the xml and bursting query you have, i can try simulating in my local. -
OWB 11gR2 - Internal ERROR: Can not find the ACL containter
OWB 11gR2 - Internal ERROR: Can not find the ACL containter
=======================================
I am using OWB 11gR2 (11.2.0.1) on Win XP 32 bit. I have 3.23 GB RAM. OWB design center is ver slow on my desktop. We have our OWB repository is on Unix server.
We applied the patch 10270220.
We are getting
Internal ERROR: Can not find the ACL containter for object:CMPPhysicalMap@19654/id=104020/owningFCO=104020/proxyFor=(CMPPhysicalMapGen@19f99ae/id=104020/stname=null/pname=MAPPING_1/lname=MAPPING_1/status=POSTED/committed=true/persistent=true/propsLoaded=true)
What is happening here?
Thanks in helping.We have a map with 3 sources and 1 target. The 3 sources pass through Joiner then Expression then Target.
We are getting this error, during deployment. It shows compling for awhile, then through this error.
Here is the piece from detail window:
===========
at oracle.wh.repos.pdl.security.SecurityPolicyManager.getAccessCharMapOfPrivilegeOwner(SecurityPolicyManager.java:174)
at oracle.wh.repos.impl.foundation.CMPElement.getAccessCharMapOfPrivilegeOwner(CMPElement.java:2806)
at oracle.wh.repos.pdl.security.OWBSecurityImpl.hasPrivilege(OWBSecurityImpl.java:914)
at oracle.wh.repos.pdl.security.OWBSecurityImpl.internalSecurityCheck(OWBSecurityImpl.java:1542)
at oracle.wh.repos.pdl.security.OWBSecurityImpl.securityCheck(OWBSecurityImpl.java:694)
at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:959)
at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:924)
at oracle.wh.repos.pdl.dispatcher.EventDispatcherImpl.beforeReadObject(EventDispatcherImpl.java:824)
at oracle.wh.repos.pdl.foundation.OWBRoot.beforeRead(OWBRoot.java:1785)
at oracle.wh.repos.owbGen.CMPStringPropertyValueGen.getValue(CMPStringPropertyValueGen.java:217)
at oracle.wh.repos.impl.properties.CMPStringPropertyValue.getValue(CMPStringPropertyValue.java:117)
at oracle.wh.repos.impl.extended.PropertyFactory.getStringValue(PropertyFactory.java:440)
at oracle.wh.repos.impl.extended.CMPWBPrimitiveProperty.rawStringValue(CMPWBPrimitiveProperty.java:260)
at oracle.wh.repos.sdk.mapping.WBMapHelper.getStringProperty(WBMapHelper.java:716)
at oracle.wh.repos.sdk.mapping.WBMapHelper.getStringProperty(WBMapHelper.java:733)
at oracle.wh.repos.sdk.mapping.WBMapHelper.getReferencedLocations(WBMapHelper.java:1361)
at oracle.wh.service.impl.runtime.EnvironmentUtils.getReferencedLocations(EnvironmentUtils.java:284)
at oracle.wh.service.impl.runtime.EnvironmentUtils.getReferencedLocations(EnvironmentUtils.java:141)
at oracle.wh.service.impl.runtime.EnvironmentUtils.getReferencedLocations(EnvironmentUtils.java:135)
at oracle.wh.service.impl.runtime.RuntimePlatformServiceImpl.getReferencedLocations(RuntimePlatformServiceImpl.java:1238)
at oracle.wh.ui.runtime.application.WHRuntimeCommandUtil.addConnectorLocations(WHRuntimeCommandUtil.java:477)
at oracle.wh.ui.runtime.application.WHRuntimeCommandGenerateDeploy.getSingleDeployLocations(WHRuntimeCommandGenerateDeploy.java:3408)
at oracle.wh.ui.runtime.application.WHRuntimeCommandGenerateDeploy.getLocationsAndNewConnectors(WHRuntimeCommandGenerateDeploy.java:3517)
at oracle.wh.ui.runtime.application.WHRuntimeCommandGenerateDeploy.doPreDeploymentActions(WHRuntimeCommandGenerateDeploy.java:3224)
at oracle.wh.ui.runtime.application.WHRuntimeCommandGenerateDeploy._internalDeploy(WHRuntimeCommandGenerateDeploy.java:2420)
at oracle.wh.ui.runtime.application.WHRuntimeCommandGenerateDeploy.doDeploymentAsynch(WHRuntimeCommandGenerateDeploy.java:2117)
at oracle.wh.ui.runtime.application.WHRuntimeCommandHandler$1.construct(WHRuntimeCommandHandler.java:1005)
at oracle.wh.ui.runtime.SwingWorker$2.run(SwingWorker.java:124)
at java.lang.Thread.run(Thread.java:595)
===========
Did anyone receive such errors? -
Warnings in FileReference - can not find the cause
I'm trying to make a loader of a few photos (use FileReference). I get the warnings, but I do not know the reason for their appearance.
warning: unable to bind to property 'fr' on class 'Object' (class is not an IEventDispatcher)
warning: unable to bind to property 'name' on class 'flash.net::FileReference'
warning: unable to bind to property 'data' on class 'flash.net::FileReference'
warning: unable to bind to property 'fr' on class 'Object' (class is not an IEventDispatcher)
warning: unable to bind to property 'name' on class 'flash.net::FileReference'
warning: unable to bind to property 'data' on class 'flash.net::FileReference'
CODE:
import mx.events.CollectionEvent;
import flash.net.FileReferenceList;
import mx.collections.ArrayCollection;
[Bindable]
private var photos:ArrayCollection = new ArrayCollection;
private var frList:FileReferenceList = new FileReferenceList;
private function init():void
photos.addEventListener(CollectionEvent.COLLECTION_CHANGE,function():void
startUploadButton.enabled = (photos.length>0);
clearPhotosButton.enabled = (photos.length>0);
frList.addEventListener(Event.SELECT,addPhotos);
private function selectPhotos():void
var fileFilter:FileFilter = new FileFilter("Images jpeg","*.jpg;*.jpeg");
frList.browse([fileFilter]);
private function addPhotos(e:Event):void
for (var i:uint = 0; i < frList.fileList.length; i++)
var elem:Object = new Object;
elem.fr = FileReference(frList.fileList[i]);
elem.fr.load();
elem.fr.addEventListener(Event.COMPLETE,refreshThumb);
photos.addItem(elem);
private function refreshThumb(e:Event):void
photosList.invalidateList();
public function clearPhoto(data:Object):void
photos.removeItemAt(photos.getItemIndex(data));
photosList.invalidateList();
private function startUpload():void
photosProgressContainer.visible = true;
var request:URLRequest = new URLRequest();
request.url = "http://localhost/tempLoader-debug/upload.php";
var fr:FileReference = photos.getItemAt(0).fr;
fr.cancel();
fr.addEventListener(ProgressEvent.PROGRESS,uploadProgress);
fr.addEventListener(DataEvent.UPLOAD_COMPLETE_DATA,uploadComplete);
fr.upload(request);
private function uploadProgress(e:ProgressEvent):void
photosProgress.setProgress(e.bytesLoaded,e.bytesTotal);
private function uploadComplete(e:DataEvent):void
photos.removeItemAt(0);
photosList.invalidateList();
if (photos.length > 0)
startUpload();
else
photosProgressContainer.visible = false;In my opinion this is the line that is causing you the warning:
<mx:Image source="{data.fr.data}" maxWidth="100" maxHeight="75"
horizontalAlign="center" verticalAlign="middle" />
That means that data should be a custom binable object and fr should be another
custom bindable object.
like
public class BindableData
public var fr:BindableData2;
public class BindableData2
public var data:String;
I am not sure though what you are trying to do though, but I assume you try top
load an image from your disk. This link will help you:
view source enabled...
http://www.everythingflex.com/flex3/flexcampItaly/
the blog post ...
http://blog.everythingflex.com/2009/09/08/flexcamp-presentation-filereference-load-part-1- of-3/
C
From: Astraport2012 <[email protected]>
To: Ursica Claudiu <[email protected]>
Sent: Sun, October 3, 2010 3:07:57 PM
Subject: Re: Warnings in FileReference - can not find the cause
I found the solution to the first part of the warning. Only need to modify the
object as ObjectProxy
public var elem:ObjectProxy = new ObjectProxy;
But with the second part is still a problem (warning: unable to bind to property
'name' on class 'flash.net::FileReference'
warning: unable to bind to property 'data' on class 'flash.net::FileReference').
I do not fully describe the problem in the first message. The main application
calls the component and passes it parameters. They cause errors.
It is this component photoThumb.mxml:
<?xml version="1.0" encoding="utf-8"?>
width="120" height="110"
backgroundColor="#FFFFFF" backgroundAlpha="0"
rollOver="{controls.visible=true;}" rollOut="{controls.visible=false;}">
<mx:Image source="@Embed('t1.png')" width="100%" height="100%" alpha="0"
horizontalAlign="center" verticalAlign="middle"/>
<mx:VBox width="100%" height="90" y="5" horizontalAlign="center" >
<mx:Image source="{data.fr.data}" maxWidth="100" maxHeight="75"
horizontalAlign="center" verticalAlign="middle" />
</mx:VBox>
<mx:Label text="{data.fr.name}" width="118" truncateToFit="false" bottom="0"
textAlign="center" />
<mx:VBox id="controls" visible="false" y="65" right="10" horizontalAlign="right"
>
<mx:Button label="X" click="parentDocument.clearPhoto(data)" fontSize="6"
width="30" height="15" />
</mx:VBox>
</mx:Canvas -
Nternal ERROR: Can not find the ACL containter for object ...
We are using OWB 10.2.0.3. We tried to introduce two basic roles to prevent user A from accessing certain parts of our project. Somehow (I cannot really say how) we ended up in the error message below whenever we want to modify the security properties of an object.
Neither in metalink nor in the oracle forums I could find any hint about that error.
Can anyone help??
Thanks in advance, Maren
Internal ERROR: Can not find the ACL containter for object:CMPMap@1ba11bc/id=2023180/owningFCO=2023180/proxyFor=(CMPMapGen@1a4d5c6/id=2023180/stname=CMPBatchMap/pname=LOAD_XML/lname=LOAD_XML/status=CLEAN/committed=true/persistent=true/propsLoaded=false)
Internal ERROR: Can not find the ACL containter for object:CMPMap@1ba11bc/id=2023180/owningFCO=2023180/proxyFor=(CMPMapGen@1a4d5c6/id=2023180/stname=CMPBatchMap/pname=LOAD_XML/lname=LOAD_XML/status=CLEAN/committed=true/persistent=true/propsLoaded=false)
at oracle.wh.repos.pdl.security.SecurityPolicyManager.getAccessCharMapOfPrivilegeOwner(SecurityPolicyManager.java:166)
at oracle.wh.repos.impl.foundation.CMPElement.getAccessCharMapOfPrivilegeOwner(CMPElement.java:2743)
at oracle.wh.repos.pdl.security.OWBSecurityImpl.hasPrivilege(OWBSecurityImpl.java:820)
at oracle.wh.repos.pdl.security.OWBSecurityImpl.internalSecurityCheck(OWBSecurityImpl.java:1449)
at oracle.wh.repos.pdl.security.OWBSecurityImpl.securityCheck(OWBSecurityImpl.java:649)
at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:660)
at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:623)
at oracle.wh.ui.common.WhSecurityHelper.securityCheck(WhSecurityHelper.java:112)
at oracle.wh.ui.console.commands.EditObjectCmd.performAction(EditObjectCmd.java:107)
at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:189)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:478)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)Hi Maren
Like you I get this error and do not know what steps caused it.In my scenario I have some mappings that give the error and some that do not - the repository user gets the error but the repository owner does not.
Thinking back over the last number of months (as this project contains 7-8 months od work - we do have exports of the project) I think the ones giving the error are those that perhaps were copied from another to start the coding but I cannot be sure.
I have read the metalink note mentioned above as well as the the queries posted by Oleg and yourself. The queries posted are slightly different, one has a where clause
fco.classname = 'CMPACLContainer' (Maren's)
and the other
fco.classname='CMPMap' (Oleg's).
Was this intentional Maren on your behalf for your problem to be fixed?
We are using 10.2.0.3.33 OWB client and 10.2.0.3.0 OWB repository.
Thanks
Edwin -
In new iPad 4g, when sim card is not inserted, I can not find the enable 4g tap in the setting-cellular data tap, can some one please tell me if this is normal and if so, then when it appears, thanks
If the SIM is out of your phone, find my phone needs a data connection, so could use wifi - IF in range of a wifi and one that it can join (ie. a known network or one that is wholly open so no login required). Your phone could also simple be turned off, so not findable, or it may have been restored (plugged into iTunes and restored as new) again, making it permanently unfindable. Honestly, for someone stealing an iPhone, this is likely the first thing they do - restore as new and it is theirs forever.
Find my iPhone is tied to the users iCloud account - the find function is part of the iCloud account's services and it communicates with the iCloud servers over a data connection - either wifi or 3G.
Have you set up your iCloud account on your replacement phone, and is it working properly on that phone?
Maybe you are looking for
-
I deleted all my photos and videos and then delete the deleted files but the photo app is still taking up 12 GB of space and I have no room for new stuff. How can I clear the memory space used by my deleted videos and photos? I don't know why the p
-
SAP TM - Change in Search help in UI structure does not reflect in FPM screen
Hi Experts, We have a FBI view in which we have added a search help to a UOM field by adding the standard search help /SCMTMS/SH_QUANTITY in the UI structure. The standard search help is showing in the UI. Now we want to add a filter in the search he
-
I just don't get it! DW practically makes web pages sing, dance and tell jokes, but won't let me center an image easily. I had hoped to 'go live' with my website today, but I've spent 3 hours trying to figure out how to center one stupid image on
-
Is anyone using Pegasus with iMovie?
I purchased Pegasus when I got my new macbook Pro, latest version purchased a few months ago. Pegasus seems fast and promising. Decided to get all my iMovie stuff and organize it onto Pegasus. I had been using a Powermac G5 previously. Was using fina
-
Connecting multiple ColdFusion 10 instances to a single Apache 2.2 server
This is replicated from StackOverflow's "Server Fault" site. The CF community there is under represented, so I'm posting here too. Sorry for "cross post". This is on Windows 7 Home Premium edition. I have got two ColdFusion 10 (updater 2) instances: