I can not get data from the sensor lsm330dl-i2c (LM3S8962)

Hello
Can you please tell how to configure the i2c for LSM330dl. The application my program, and part of the datasheet.
thank you
Attachments:
545.jpg ‏35 KB
1.jpg ‏206 KB
2.jpg ‏178 KB

Hi,
I was taking a look at your code and the following example LabVIEW Embedded for ARM I2C Example and there may be an issue with the front panel not updating correctly. Can you use breakpoints and probes to check the wire values? This will let you verify whether the values are actually coming through and just not updating on the front panel.
Also are you able to run that example (you'll have to create a new ARM project to use the example with the LM3S8962)? The example looks very similar to what you are already doing.
Cheers,
Scott A
SSP Product Manager
National Instruments

Similar Messages

've Password job a year ago to Mobil iPhone 4, and now lost and I can not wipe data from the device or transferred to the new device .. What do I do?

've Password job a year ago to Mobil iPhone 4, and now lost and I can not wipe data from the device or transferred to the new device .. What do I do?

iPhones require a SIM for activation.
Put the device in DFU mode (google it) and restore via iTunes.

I can not synchronize data from the prelude livelog

I can not synchronize data from the prelude livelog apparently seems to be all right, more aprasenta the following message: The Open Clip does not support XMP.
The Prelude can not apply metadata in it.
please can someone help me

Hi -
When it comes to AVCHD footage, Prelude wants to leverage the complex folder structure in order to save metadata. If the file is just the *.MTS file and is not part of the original folder structure, Prelude will report it cannot write metadata to the file. You can transcode the *.MTS to another format and then add metadata.
We are looking at future solution for what we call "naked MTS file", but unfortunately that is not part of the currently released product version.
Michael

How can I get Data from the Sound cart in Labview? Does a VI exist?

How can I get Data from the Sound cart in Labview? Does a VI exist?

Yes, there are VIs for acquiring data from Sound cards. And examples too. If you don't have LabVIEW yet, do a search on NI's site for example VIs.
Khalid

Can not get data from database

hi all,
    there is a problem , when i write like below :
SELECT * FROM bsis INTO CORRESPONDING FIELDS OF TABLE it_temp
          WHERE bukrs = p_bukrs
            AND hkont = p_hkont.
p_bukrs , p_hkont are all on the selection screen , and p_bukrs = 1200 another is eq blank. i can not find any data , but with the same condition i can find some data in database , when i debeg i found that p_hkont is initial.
    when i write like this :
SELECT * FROM bsis INTO CORRESPONDING FIELDS OF TABLE it_temp
          WHERE bukrs = p_bukrs .
this time i can find the data like the database.
    so , does someone know where the problem is , why i can not get data ?
kind regards
kevin

hi,
if u r using bukrs and hkont as parameters in selection screen then
SELECT * FROM bsis INTO CORRESPONDING FIELDS OF TABLE it_temp
WHERE bukrs = p_bukrs
AND hkont = p_hkont.
this will work.
if u r using then as select-option then the above does n't work.
bcoz select-options work as internal table bcoz of that u have use the query like this
SELECT * FROM bsis INTO CORRESPONDING FIELDS OF TABLE it_temp
WHERE bukrs IN p_bukrs
AND hkont IN p_hkont.
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Edited by: Alvaro Tejada Galindo on Aug 15, 2008 5:25 PM

Can not get data from mySql

I prepared a GUI user connection application in NebBeans 5.5 accessing mySql database in the company server. The application run very well in desktop.
However, when I post it to the company server web, it gets nothing from the database.
Can any one give advice???
Thank you in advance.
The following is my application
import java.util.Vector;
import java.awt.event.*;
import java.awt.*;
import java.awt.event.*;
public class UserConnection extends javax.swing.JFrame {
//constants for database
private final String userName = "labmanage";
private final String password = "labmanage";
private final String server = "jdbc:mysql://svr.corp.com/labmanage";
private final String driver = "com.mysql.jdbc.Driver";
private JDBCAdapter data = new JDBCAdapter(server, driver, userName, password);
//variables
private String user, pwd;
private Vector<Vector<String>> userTable = new Vector<Vector<String>>();
private Vector<String>colUserNames = new Vector<String>();
* Creates new form UserConnection
public UserConnection() {
initComponents();
/** This method is called from within the constructor to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
// <editor-fold defaultstate="collapsed" desc=" Generated Code ">
private void initComponents() {
userLabel = new javax.swing.JLabel();
pwdLabel = new javax.swing.JLabel();
userTextField = new javax.swing.JTextField();
passwordField = new javax.swing.JPasswordField();
submitButton = new javax.swing.JButton();
statusLabel = new javax.swing.JLabel();
jScrollPane1 = new javax.swing.JScrollPane();
statusTextArea = new javax.swing.JTextArea();
changePwdButton = new javax.swing.JButton();
setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
setTitle("User's Connection");
setBackground(new java.awt.Color(153, 204, 255));
setCursor(new java.awt.Cursor(java.awt.Cursor.DEFAULT_CURSOR));
setFont(new java.awt.Font("aakar", 1, 12));
userLabel.setText("User Name:");
pwdLabel.setText("Password:");
submitButton.setText("Submit");
submitButton.addMouseListener(new java.awt.event.MouseAdapter() {
public void mouseClicked(java.awt.event.MouseEvent evt) {
submitButtonMouseClicked(evt);
submitButton.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
submitButtonActionPerformed(evt);
submitButton.addKeyListener(new java.awt.event.KeyAdapter() {
public void keyTyped(java.awt.event.KeyEvent evt) {
submitButtonKeyTyped(evt);
statusLabel.setText("Status:");
statusTextArea.setColumns(20);
statusTextArea.setEditable(false);
statusTextArea.setLineWrap(true);
statusTextArea.setRows(3);
statusTextArea.setText("Initial assigned password is \"dime\".");
statusTextArea.setWrapStyleWord(true);
jScrollPane1.setViewportView(statusTextArea);
changePwdButton.setText("Change password");
changePwdButton.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
changePwdButtonActionPerformed(evt);
org.jdesktop.layout.GroupLayout layout = new org.jdesktop.layout.GroupLayout(getContentPane());
getContentPane().setLayout(layout);
layout.setHorizontalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.addContainerGap()
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(userLabel)
.add(pwdLabel)
.add(statusLabel))
.add(35, 35, 35)
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.add(submitButton)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(changePwdButton))
.add(passwordField, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 230, Short.MAX_VALUE)
.add(userTextField, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 230, Short.MAX_VALUE)
.add(org.jdesktop.layout.GroupLayout.TRAILING, jScrollPane1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 230, Short.MAX_VALUE))
.addContainerGap())
layout.setVerticalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.addContainerGap()
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(userLabel)
.add(userTextField, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(pwdLabel)
.add(passwordField, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(statusLabel)
.add(jScrollPane1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.add(15, 15, 15)
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(submitButton)
.add(changePwdButton))
.addContainerGap(27, Short.MAX_VALUE))
pack();
}// </editor-fold>
private void submitButtonKeyTyped(java.awt.event.KeyEvent evt) {
if(evt.getKeyCode() == KeyEvent.VK_ENTER) {
submitButton.doClick();
submitButton.requestFocus();
changePwdButton.requestFocus();
private void changePwdButtonActionPerformed(java.awt.event.ActionEvent evt) {
String command = evt.getActionCommand();
if(command.equals("Change password")) {
passwordField.setText("");
//Get connection to the changing password panel
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
new ChangePassword().setVisible(true);
private void submitButtonActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
String command = evt.getActionCommand();
if(command.equals("Submit")) {
user = getUser();
pwd = getPwd();
data = new JDBCAdapter(server, driver, userName, password);
data.executeQuery("SELECT * FROM USERTABLE");
colUserNames = data.getColumnNames();
userTable = data.getDataTable();
if(colUserNames.elementAt(0).equals("")) {
statusTextArea.setText("Can not connect to database");
boolean checkUser = false;
int i = 0;
while(!checkUser && i<userTable.size()) {
if(user.equalsIgnoreCase((String) userTable.elementAt(i).elementAt(0))) {
//Find the user in database
checkUser = true;
//Check user's password
if(pwd.equals((String)userTable.elementAt(i).elementAt(1))) {
//Check for initial default password. The user is requested
//to change his password
if(pwd.equals((String) "dime")) {
statusTextArea.setText("You are requested to change your " +
"initial assigned password. Click 'Change password' please.");
else {
//Set UserConnection Panel to invisible
setVisible(false);
dispose();
//Get connection to the table
if(userTable.elementAt(i).elementAt(2).equals("0")) {
//Get connection to non-editable table
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
PVRackReportNonEdit rackReport = new PVRackReportNonEdit();
rackReport.createAndShowDialog();
else {
if(userTable.elementAt(i).elementAt(2).equals("1")) {
//Get connection to editable table
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
PVRackReport rackReport = new PVRackReport(user);
rackReport.createAndShowDialog();
//PVRackReport rackReport = new PVRackReport();
else statusTextArea.setText("You do not get approval for viewing data. " +
"Please contact the administrator for details.");
else {
passwordField.setText("");
statusTextArea.setText("Please enter corrected password or" +
"the administrator for details.");
i++;
if(!checkUser) {
passwordField.setText("");
statusTextArea.setText("Not find such user's name." +
"contact the admistrator for details.");
private void submitButtonMouseClicked(java.awt.event.MouseEvent evt) {
// TODO add your handling code here:
* @param args the command line arguments
public static void main(String args[]) {
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
new UserConnection().setVisible(true);
public String getUser() {
return userTextField.getText();
public String getPwd() {
return passwordField.getText();
// Variables declaration - do not modify
private javax.swing.JButton changePwdButton;
private javax.swing.JScrollPane jScrollPane1;
private javax.swing.JPasswordField passwordField;
private javax.swing.JLabel pwdLabel;
private javax.swing.JLabel statusLabel;
private javax.swing.JTextArea statusTextArea;
private javax.swing.JButton submitButton;
private javax.swing.JLabel userLabel;
private javax.swing.JTextField userTextField;
// End of variables declaration
Here is my JDBCAdapter
package rackdemo2;
* This is an adaptor which transforms the JDBC interface
* to the PVRackTableDialogue
import java.util.Vector;
import java.sql.*;
import javax.swing.table.AbstractTableModel;
import javax.swing.event.TableModelEvent;
public class JDBCAdapter {
Connection connection;
Statement statement;
ResultSet resultSet;
Vector<String> columnNames = new Vector<String>();
Vector<Vector<String>> rows = new Vector<Vector<String>>();
ResultSetMetaData metaData;
public JDBCAdapter(String url, String driverName,
String user, String passwd) {
try {
Class.forName(driverName);
connection = DriverManager.getConnection(url, user, passwd);
statement = connection.createStatement();
catch (ClassNotFoundException ex) {
System.err.println("Cannot find the database driver classes.");
System.err.println(ex);
catch (SQLException ex) {
System.err.println("Cannot connect to this database.");
System.err.println(ex);
public void executeQuery(String query) {
if (connection == null || statement == null) {
System.err.println("There is no database to execute the query.");
return;
try {
resultSet = statement.executeQuery(query);
metaData = resultSet.getMetaData();
int numberOfColumns = metaData.getColumnCount();
// Get the column names and cache them.
// Then we can close the connection.
for(int column = 0; column < numberOfColumns; column++) {
columnNames.addElement(metaData.getColumnLabel(column+1));
// Get all rows.
while (resultSet.next()) {
Vector<String> newRow = new Vector<String>();
for (int i = 1; i <= columnNames.size(); i++) {
String tempString = resultSet.getString(i);
if(!tempString.equals("null")) {
newRow.addElement(tempString);
else {
newRow.addElement("");
rows.addElement(newRow);
//Modify dataTable to add empty row to separate chassis
if(numberOfColumns>1) {
int nRow = rows.size();
Vector<String> row = new Vector<String>();
for(int i=0; i<numberOfColumns; i++){
row.add("");
if(nRow>0 || numberOfColumns>0) {
//Adding blank row to separate chassis
int i = 0;
while(i<nRow) {
if(!rows.elementAt(i).elementAt(0).equals("")) {
if(i>0) {
rows.add(i, row);
i++;
nRow = rows.size();
i++;
close();
catch (SQLException ex) {
System.err.println(ex);
public void close() throws SQLException {
resultSet.close();
statement.close();
connection.close();
// MetaData
public Vector<String> getColumnNames() {
return columnNames;
public Vector<Vector<String>> getDataTable() {
return rows;
public int getColumnCount() {
return columnNames.size();
// Data methods
public int getRowCount() {
return rows.size();
}

Thank you for your answer.
I'm very new to mySql as server. When I was assigned
to write the application, the administrator has set
up mySql database in the company web server for my
application. My program runs very when using my
workplace desktop with java web start or with java
web start in netbeans (all paths should be link to my
desktop hard disk, i.e. users/application/). I can
not run the application at home because I can not
access to the company intranet server (for security
purpose). The problem happens when I post the
application in the company web page (I have to modify
all paths in jnlp file to the company web address).
The program then runs without exception except it
seems that it gets no data from the database (for
example, when I type my username, it returns that
"There is no such user name. contact.." as what I
code in the application for not correcting user name)
It happens for not only using my company desktop but
also for others.
Please help me.
Thank you in advance.And all this could have been answered yesterday, in your other thread, when I asked you "Is the DB configured to allow that user to connect to the DB from where that user is attempting to connect from?"
Seeing as how you get that error, the obvious answer was, "No." At which point we could have continued.
Configure the needed users into the DB, without forgetting to allow them access from the machines from which they are going to access from.
Although, I agree with Rene, that you should set up a server of some sort, located on the same machine as the DB, for communicating with the DB.

How can i get data from the other system?

hi,
i want get some data from the other r3 system in my r3 system? now this two r3 system are installed two server.

Hi,
U can achieve this by RFC function module...
create a function module and make it as REMOTE ENEBLED IN ATTRIBUTES TAB..
for example i have to r/3 systems as A and B.
I want to get data from B system..
so create the FM in B system and then in A SYSTEM u have to call that one ,like this....
DESTINATION NAME IS FOR SYSTEM B.
CALL FUNCTION 'ZRFC' DESTINATION <DESTINATION NAME>
EXPORTING
IMPORTING
TABLES..
Regards,
Nagaraj

Can not get data from actionscript db operation class?

DBOperation.as:
import flash.events.*;
import flash.net.NetConnection;
import flash.net.ObjectEncoding;
import flash.net.Responder;
import mx.collections.ArrayCollection;
import mx.controls.List;
import mx.rpc.events.ResultEvent;
import mx.collections.ArrayCollection;
public class DBOperation
private var nc:NetConnection;
private var responder:Responder;
public var list:ArrayCollection;
public function DBOperation():void{
nc = new NetConnection();
nc.objectEncoding = ObjectEncoding.AMF0;
nc.connect("rtmp://localhost/ins");
public function getSolutionData(sql:String):Boolean
responder=new Responder(getSolutionList,null);
nc.call
("dbo.getSolutionData",responder,sql);
return true;
public function getSolutionList
(solution:Object):void{
var solutionList:Array = new Array();
for(var items:String in solution)
solutionList.push
({label:items,title:solution[items].title,owner:solution
[items].owner,submitTime:solution[items].submitTime,image:solution
[items].image,imgInstruction:solution[items].imgInstruction});
list = new ArrayCollection(solutionList);
datagrid.mxml:
<mx:Script>
<![CDATA[
import DBOperation;
import mx.collections.ArrayCollection;
[Bindable]
private var solutionList:ArrayCollection;
private function initDG():void{
var dbo:DBOperation=new
DBOperation();
dbo.getSolutionData("some sql
strings");
solutionList=dbo.list;
]]>
</mx:Script>
my problem is I can get the data using DBOperation class,but
I can not
assign it to solutionList by "solutionList=dbo.list;"
The debug information says dbo.list=null, however inside
DBOperation
the "list" is full of data.
What's wrong with it??
Thanks!

hi,
if u r using bukrs and hkont as parameters in selection screen then
SELECT * FROM bsis INTO CORRESPONDING FIELDS OF TABLE it_temp
WHERE bukrs = p_bukrs
AND hkont = p_hkont.
this will work.
if u r using then as select-option then the above does n't work.
bcoz select-options work as internal table bcoz of that u have use the query like this
SELECT * FROM bsis INTO CORRESPONDING FIELDS OF TABLE it_temp
WHERE bukrs IN p_bukrs
AND hkont IN p_hkont.
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Edited by: Alvaro Tejada Galindo on Aug 15, 2008 5:25 PM

I can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name

can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name. My original external has an error and needs to be reformatted but I dont want to lose this informations its my entire Itunes library.

Sounds like the source drive is formatted as case sensitive and the destination drive is not. The preferred format for OS X is case insensitive unless there is a compelling reason to go case sensitive.
Why can't you change the filename? Is it because the source drive is having problems? If so is this happening with only one or two or a few files? If so the best thing would be to copy those over individually and then rename them on the destination drive.
If it is more then you can do manually and you can't change the name on the source you will have to reformat the destination as case sensitive.
Btw this group is for discussion of the Support Communities itself, you;d do better posting to Lion group. I'll see if a host will move it.

I am trying to download xfinity tv go app. I can not find it in my App Store and can not download it from the comcast website. All I get is a blank screen in the App Store. My Apple ID is associated with a Canadian address. How can I find the app?

I am trying to download xfinity tv go app. I can not find it in my App Store and can not download it from the comcast website. All I get is a blank screen in the App Store. My Apple ID is associated with a Canadian address. How can I find the app?

Its possible the App is not available in the Canadian store if the link doesn't work for you.
https://itunes.apple.com/us/app/xfinity-connect/id320788270?mt=8

When I was talking on phone, suddenly the phone was switched off. i tried to switch it on but it gave the message....connect to itunes for set up. when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it

when I was talking on phone, suddenly the phone was switched off.
i tried to switch it on but it gave the message....connect to itunes for set up.
when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it to factory settings. It also said while restoring ypu will lose all media data but you can restore the contacts.
I restored the factory settings....the phone was on recovery mode...it was verified by itunes and all that..but in the end it again said that iphone has some problem and can not function right now.
after that when ever i connect it with itunes, it gives the message, it can not activate the iphone further, try again later or contact customer service.
What to do now?????? Customer service people say..it is hardware problem

If it's a hardware problem, then the phone will need to be replaced.
There is no magic that can fix a hardware problem.

Can we get data from business views in CR 2008/XI?

Hi All,
Can we get data from business views in CR 2008/XI?
If its possible, pls let us know how to get connect with Business View in both of these versions and what is the tool that we have to use to create Business Views.
Thank you,
Krishna Pingali

Hi Krishna,
Crystal Reports/BusinessObjects Enterprise ( BOE ) Business Views can only be created using the BV build which comes with BOE and installed using the Work Station installer for BOE. for both XI and 2008.
You cannot mix these two versions on the same PC not can one talk to the other, the BV designer must match the same version as BOE. XI ( version 11.0 ) is no longer available but if you mean XI R2 ( version 11.5 ) then it still is.
It's not completely clear which Business View you are referring to? BOE has a Business View Designer so not sure if this is just a naming problem or not? If you are referring to the BOE Business View Designer then the above is true. If your reference is about some other BV designer or data source then you need to clarify.
Contact our Sales department for pricing and availability.
Thank you
Don

EJB-Archive for getting Data from the DB

Hello,
I want to get data from the Database. I created a EJB-Project with an Entity Bean and a Session Bean.
The jar-Archive that I generated is corrupt. Is that normal?
Can you provide me with information on database acces?
In ABAP it would be a piece of cake: Select * from table into ...;-)
Greetings, Frank

Hi Frank,
I see that you are interested in getting data from R/3, please correct me if I'm wrong.
If that's so, you cannot do it by purely using EJBs, as an entity bean maps to a Table row in the database, which is not quite straight forward in terms of R/3.
The only way to get data from R/3 is to use
1)Java + SAP JCO
2)or a Netweaver technology like Webdynpro + Adaptive RFC
3)Portal Component + SAP JCO.
Again, assuming you're dealing with a WebAS server, coming to EJBs, its no different to any other application server. So, you need an RDBMS to use Entity Beans.
Please let me know if you've got more doubts.
Regards,
Rajit

IChat Error: "Can't get video from the camera"

When I try to Screen Share with iChat on a local network, I receive the error "Can't get video from the camera" when I have an external camera plugged into the FW400 port on my Mac Mini. The Screen Sharing feature works great when the camera is not connected. Anyone know why this is and how to fix it?

Tell us about the Network you created please.
What make and model modem ?
Can it route (issue IPs) ?
IS there a router ?
Make and model of that please ?
If there are two devices which is doing DHCP if any are ?
IS there any computer that is sharing it's Internet Connection with any other computer ?
I take it from the title and the post that you infer you can Video and Audio chat ?
The Cannot get Video from Camera normally gets and Error Log pop up.
This can be opened with the reveal triangle on the left. The Details shown will have a Error number. Do you know what this log says ? (normally Error 20 or 21)
Old logs are stored in Users/(your account)/Library/Logs/iChatConnectionErrors by date.
IF you post an Error Log stop at the line that Says "Binary Images for iChat" as we don't need the bits below that yet.
As the Screen share in iChat uses an Audio component then the Camera if it is also the Mic needs to be ON.
In your case this may mean that in the ichat Video Menu both Camera Enabled and Mic Enabled should both be ticked.
(I have never seen an iChat error code for not (specifically) being able to get the Mic input so the message might be the only one iChat can pop up)
It does seem very odd that it only effecting Screen Sharing.
I have a Firewire connected DV converter that has two Firewire ports itself so I can input the camera feed to two computers. When this is in place the System also sees it as a Network.
I have also heard of one person with a Firewire Stills camera and I think the Storage space was seen as an External Device and therefore appeared Networked which is why I asked the first set of questions.
iChat does not like being in Two networks (a modem that issues IP address and a router doing the same or Wireless to a neighbour and Ethernet to your Own Internet connection, the Mac being the hub in a Share Internet connection, Wireless and Ethernet to the same router and using Parallels when set to Share the Mac's IP are the most common)
The Screen Sharing option in iChat > Video Menu is ON ? (at both ends ?)
As iChat's Screen Sharing is related to the System Screen Sharing and therefore Apple Remote Desktop you may find that in any routing device you may have to open ports 5900 and 5988 if not using UPnP
http://support.apple.com/kb/TS1629?viewlocale=en_US
You said Local Network. Do you mean this is using the Bonjour Buddy List ?
11:21 AM Saturday; June 14, 2008

Powerpivot Error on Refresh -- "We couldn't get data from the data model..."

I'm using Excel 2013 and Windows 8.1. I have a spreadsheet I've been using for over a year, and I've just started getting this error message when I try to refresh the data.
"We couldn't get data from the Data Model. Here's the error message we got:
The 'attributeRelationship' with 'AttributeID' - 'PuttDistCat9' doesn't exist in the collection"
Any idea how I can fix this problem? I haven't changed anything related to that particular attribute. All the data is contained in separate sheets in the workbook, so there are no external sources of data.
Thanks.
Jean

Thanks for all the suggestions.
I found a slightly older version of the spreadsheet that still refreshes properly, so I don't think I have any issues with the version of Excel or Power Query. (I've had this same error before, and I believe I applied the hotfix at that time.)
I think this problem started after I updated a number of the date filters in the pivot tables. I haven't made any changes to the data model, and the only updates I've made were to add data (which I do all the time), and to change the date filters on
the pivot tables.
As suggested, I added a new pivot table querying one table (the table with the attribute that shows up in the error message), and it worked fine. I can also refresh this pivot table.
Then I tried adding a pivot table which went against several tables in the data model (including the table in question). The pivot table seemed to return that data properly. However, when I tried to refresh it, I got the same error message ("we
couldn't get data from the data model...").
Dany also suggested running the queries one at a time to see which one is in error. Without checking all the pivot tables, it appears that any which use the table "HolePlayedStrokes" generate the error (this is the table with the attribute
mentioned in the error message). Pivot Tables without that particular table seem to refresh OK. Unfortunately, that is the main table in my data model, so most of the pivot tables use it.
Any other suggestions? I'd be happy to send a copy of the spreadsheet.
Thanks for all the help.
Jean

I can not get data from the sensor lsm330dl-i​2c (LM3S8962)

Similar Messages

Maybe you are looking for

I can not get data from the sensor lsm330dl-i2c (LM3S8962)