I can not get my computer to take the download for Firefox.

I am trying to download Firefox, but everytime I get to the extracting stage it stops. What can I do to finish the download?

Hi,
Here it is:
  http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=304431
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • HT4623 I can not get my Ipad to update the latest software rendering my Ipad useless. It keeps saying software update unavailable.

    I can not get my IPAD to update the latest software the update says it is unavailable at this time try later I have been trying for 5 hours  any suggestions as this renders my IPAD useless

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    You can no longer update to iOS 6.x, or down grade the iOS.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
    How to Upgrade to iOS 7
    The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
    There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
    To upgrade using Wi-Fi:
    Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
    Go into the iPad's Settings.
    Locate and tap "General" from the menu on the left.
    The second option from the top is "Software Update". Tap this to move into the update settings.
    Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
    Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
    To upgrade using iTunes:
    First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
    You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
    Now you are ready to begin the process:
    If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
    Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
    After canceling the dialog box, iTunes should automatically sync with your iPad.
    If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
    After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
    From the iPad screen, click on the Update button.
    After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
    After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
     Cheers, Tom

  • My computer restarted while my shuffle was installing and now I can't get my computer to register the connection. What do I do?

    My computer restarted while it was installing the shuffle for the first time. Now I cannot get my computer to register the connection and I cannot put music on my shuffle. How can I get my computer to install the driver again and start using my shuffle?

    Hey jessandmatt17,
    If you cannot get your iPod Shuffle to show up in iTunes, check out the following articles depending if it shows up on your computer within Windows Explorer. With the iPod Shuffle plugged in check in Windows Explorer to see if it shows up as a removable device. They both will help no matter how the iPod Shuffle shows up.
    iPod not recognized in 'My Computer' and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Can not get Garage Band on my ipone 5c for free

    can not get Garage Band on my iphone 5c for free

    Hello anime26,
    Check out the article below to walk you through getting GarageBand for free. One thing to remember is that in order to get it, you would need to have purchased your iPhone after September 1st. 
    Free Apple apps for your iPhone, iPad, and iPod touch with iOS 8
    http://support.apple.com/kb/HT5913
    Regards,
    -Norm G. 

  • I have a pioneer 50 inch plasma   I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.   The receiver has two HDMI  inputs in the back.

    I have a pioneer 50 inch plasma + I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.
    The receiver has two HDMI  inputs in the back.  However they say they are not for PC's.  Furthermore they must be set up by going to the home menu.    I tried everything, but I can not get the receiver to talk to the Apple TV. I even tried a connector that uses an HDMI to the Apple TV that has the other side of the cable as 5 RCA cables.  I could not get the receiver to see the Apple TV.   I have a newer TV in the house, it has no problem talking with the Apple TV.  But this older system seems to be handicapped in its ability to talk with the newer Apple TV system.
    My Email is [email protected] 
    Do you have any suggestions
    Thanks
    Bob

    I could not access the Apple TV on the television.   If I put the Apple TV directly into by TV, I have an external sound system (entertainment system), therefore I worry that I would by pass the audio.
    Thanks for taking your time to attempt to help!   Any more suggestions would be greatly appreciated.
    Bob

  • HT1430 Can not get mail , it sayes that the user name or password is incorret, it the right one

    Can not get mail , it sayes that the user name or password is incorret, it the right one

    You need to contact the email provider and reset your information. All your iPhone does is send the information to the provider and they are stating your username or password are incorrect. If you contact the provider they can help you reset it so it will work with your phone

  • Hi there, I updated to ML about 3 weeks ago I can not get in to my apps to download it again as when it was installing the first time I decided to skip the part where it said do i want to do the iTunes and iCloud thing. any sugentions how to go back and

    Hi there, I updated to ML about 3 weeks ago I can not get in to my pps to download it again as when it was installing the first time I decided to skip the part where it said do i want to do the iTunes and iCloud thing. any suggentions how to go back and change that part or do I have to download it again.
    Thanks
    GeeRic

    To set up iCloud, open System Preferences > iCloud, and follow its steps to use iCloud

  • Cannon HV20 - can't get my computer to acknowledge the camera

    I just purchased a cannon HV20 camcorder. I have followed instructions and can't get my computer to acknowledge the camera.
    what am i doing wrong?

    hiya!
    let's quickly try something simple. while the ipod is plugged in to the computer, try resetting it:
    Resetting iPod if it appears frozen or doesn't respond
    do you get recognition once the reset is complete?
    love, b

  • TS4002 I can not activate my iphone after running the software for icloud account not remember, I wish abble to open my computer soon. My phone IMEI 013007007033970

    I can not activate my iphone after running the software for icloud account not remember, I wish abble to open my computer soon. My phone IMEI 013007007033970

    Hi nguyen trong thang,
    I apologize, I'm a bit unclear on the exact nature of your issue. If you are saying that you are having issues activating your iPhone, you may find the troubleshooting steps in the following article helpful:
    iPhone: Troubleshooting activation issues
    http://support.apple.com/kb/ts3424
    Regards,
    - Brenden

  • I can not find a Flash version of the BIOS for HP Pavilion tx1320er.

    Good day!
    I can not find a Flash version of the BIOS for HP Pavilion tx1320er.
    I can not start the laptop black screen at startup, all the LEDs are lit, read this bill is that it is written bios. The battery dropped does not help, when you turn to pressed keys windows laptop B responds uttering a sound. but I have no USB BIOS version, so just to be sure of the death of my laptop.
    P.S. I write a google transleyt sorry for the errors of translation.

    Hello,
    What does "I tried the apt version of which doesn't download," mean? Are you trying to download from get.adobe.com/flashplayer or from Ubuntu's Update Manager?
    BTW, I deleted your other thread.  Posting the same topic in multiple threads doesn't help your issue get answered quicker and does lead to confusion in responding to two different threads.
    Maria

  • Every time I try to call or they call me, my phone beugs I can not immediatly to call, denied access the directory for 2 to 4 minutes after that it works again   I tried all but nothing, everything works except the call   I have an iPhone 4 Version 6.1.3

    every time I try to call or they call me, my phone beugs I can not immediatly to call, denied access the directory for 2 to 4 minutes after that it works again
      I tried all but nothing, everything works except the call
      I have an iPhone 4 Version 6.1.3
    thank you for your help

    That is the highest you will be able to go with 3g. You need 3gs or 4 to go any higher (multi processors and more memory needed).  Version 4.2.1 marks the end of your updates for that device.

  • HT201320 I changed my yahoo password but now can not access mail on my iPad  The settings for email is not a hot link

    I changed my yahoo password but now can not access mail on my iPad  The settings for email is not a hot link

    Go into setting on the iPad
    Mail, Calendar, contact...
    Tap your email account
    back out the dots and enter the correct passcode.

  • I need to download Mac OS X 10.8. Can someone please steer me to find the download for 10.8?

    (the original version) so that I can upgrade my system and install Logic X. I currently have 10.7.5 and a late 2011 Macbook Pro and the new Logic will not install. Can someone please steer me to find the download for 10.8?

    First check the... Tech Specs  >  http://www.apple.com/osx/specs/
    Mountain Lion Download...
    http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion
    Be sure to make a Backup of your Current System Before Upgrading.

  • I want to change my password but can not get passed verification even though the answers are correct, so I have asked for an email and none has come.Can some one help?

    I have tried to change my password and get to the part where you need to verify by answering the questions, and I get can not get any further, as it tells me the answers aren't the ones they have but I know it is correct, so I have asked for an email to be sent, but no email comes.I receive other emails from iTunes but not the one helping me to change the password. Has any one got any idea why?

    Contact iTunes customer support, no one in these user to user support forums can assist  you.

  • Can not get new version of itunes to download

    can not get the new version of itunes to download to my apple so i connect my iphone

    I just clicked on the apple icon in the upper left corner of osx and choose software update then it
    updated the latests version of itunes
    but if it's very old you have a problem
    Syncing with iTunes on a Mac or PC requires:
    *Mac: OS X v10.5.8 or later

Maybe you are looking for

  • Was library sharing disabled in iTunes 6.0.1.3?

    I'm no longer able to see other users' libaries (on my network) since I upgraded to 6.0.1.3. I know others who have the same problem, even though we have "Look for shared music" checked in Preferences. Users with older versions of iTunes can see othe

  • Error while installing AD4J

    Hi, I am getting a system error during the AD4j installation. Here is the error stack. The installation is successful but it couldn't start the Jam Console service. The log also contains the values i am using for key generation. Am I missing some ste

  • Mostly tables in process or scheduled for a longer period of time

    Hi Folks, I am a newbie to SLT. Sorry if I ask some basic stuff. I am using HANA and SLT and can see below list of tables are in state or 'In Process' or 'Scheduled' for couple of days. For one of my Ztable its says 'scheduled' in HANA and trigger st

  • Configuring IDOC to file Scenario in PI 7

    Hello All, I am doing an IDOC to file scenario, all the configuration is done. When i trigger the outbound IDOC, I can see in SXMB_MONI the sender component, sender Namespace, sender interface and reciever component are coming up correctly as configu

  • Matrix summary report

    I have following coloumns in a table PERSON      (id) EDU     (educated,non-educated) CITY     citycode COUNTRY     countrycode I have to generate matrix summary report in SQLplus. I have to print countrycode in vertical coloumn(LEFT MOST), I have to