I can not get my phone to ring

my phone will not ring or vibrate, how do you turn on ringer

Hello, Krystina1968. 
Thank you for visiting Apple Support Communities. 
I would check and make sure the Ring/Silent switch is not engaged to silent.  Also, check the settings on your device to make sure vibrate is enabled. 
iPhone Buttons
http://support.apple.com/kb/ta38625
Sounds and silence
Cheers,
Jason H. 

Similar Messages

  • I can't get my phone to ring. When a call comes in the phone vibrates. I have checked my settings

    I can't get my phone to ring. When a call comes in the phone vibrates. I have checked my [email protected]

    There should be a little switch on the top left side of your phone. It's the silent mode. If it's switched on, you will see an orange bar there. Switch it off, and you'll get your sound back.

  • I can not get my phone to sign in to my wi fi. I used to, then I lost power to the internet and now it won't. Al other devices will.

    I can not get my phone to sign in to my wi fi. I used to, then I lost power to the internet and now it won't. All other devices will.

    Try forgetting the Wi-Fi network and then joining it again, just tap Settings >  Wi-Fi > the arrow next to your network > Forget this Network, then join the network again.
    If that doesn't do it, take a look at this Apple doc -> iOS: Troubleshooting Wi-Fi networks and connections

  • I can not get my phone backed up to the Cloud. Can someone please assist?

    I can not get my phone to back up to the cloud.  Can someone assit me with this?

    You’d need to supply more details about what’s not working for us to help…

  • I can not get a phone calls from my country after using ssim card here.

    Hi I am Amy whoes phone is from South korea using ur ssim card from yesterday in NY.I asked if i can get phones calls from South korea though the number that i used in South korea and they said yes. Not only one but some at AT&T. But i can not get a phone calls. How can i get a call from South korea? Also, I am wondering if i chage the ssim card from you for my original one from south korea by myself to check. Is it possible that after the checking changing original one to new one from you? Thanks,Amy 

    Reset the network settings, they must still say ATT/Cingular.

  • Can not get i phone to sync

    Can not get my iphone to sync

    On this thread:
    My iPhone 3G is not recognized as device in iTunes.
    Diagnostics says iPhone found/connected. Sync test failed.
    Things I’ve done:
    1)
    http://support.apple.com/kb/HT1923
    Removing and reinstalling iTunes, QuickTime, andother software components for Windows       Vista or Windows 7. Full uninstall,verify, reinstall – multiple times.
        2)
    http://support.apple.com/kb/ts1538
    iPhone, iPad, oriPod touch: Device not recognized in iTunes for Windows
        3)
    http://support.apple.com/kb/HT2292
    Using Msconfig totroubleshoot conflicts in Windows Vista and Windows 7
    Turned on all startup services and processes
    Turned Off NortonInternet Security
    Uninstalled
    Ad Aware
    Immunet
    Soluto
    Malware Bytes
    After reinstall of iTunes and turning off all anti-everything, sync begins but never finishes.
    Also, iTunes slow with some tasks but not all..

  • I have a brand new IPhone 4G.  For the life of me, I can't get the phone to ring. I have been in and out of my settings, have disengaged both silent and vibrate.  But when dialing my number from another phone, the call goes direclty into my voice mail

    I have a brand new IPhone 4G.  I can't get it to ring.  I have gone into settings and disengaged vibrate, and have engaged the ring button on side of phone.  But everytime I dial my number from a different phone, it doesn't ring. Rather the call goes directly into my voice mailbox (ogm heard immediately); not even one ring! Please advise

    Well, if it goes to VM immediately the call isn't reaching your phone, so no wonder it isn't ringing. Do you see a network displayed in the upper left of the screen? Have you activated the phone by connecting to a computer with the latest version of iTunes? Have you called your carrier to make sure they have provisioned it correctly?

  • How can I get my phone to ring every 2 seconds?

       I've looked and looked all over the internet and I have seen people with this problem but so far no solutions. I would like my bb8520 to function as any $20dollar phone would, which is to ring  every 2 seconds instead of every 10 seconds.
       My phone rings, then 10 seconds later it rings again, by the time 10 more seconds have gone by, the caller either hangs up or is sent to voice mail. If you miss the first ring, hear the second but take a little while to find or reach your phone, you miss the call.
       Is there any way I can decrease the time between rings??  I really hope someone has a solution besides contacting the carrier. The caller usually hears about 8 to 10 rings before it goes to voice mail, so it is not a carrier issue. The problem is for me, not for my caller.
       I have already changed the profiles every which way, you can only change the number of vibrations, but not the rings. My only solution so far has been to program a song as a ringtone so it lasts longer, but I prefer a regular ring ring.
      I'ts incredible that RIM hasn't been able to make this easy.
      By the way, my other issue I had is that it wouldn't vibrate and ring simultaneously, but I solved that downloading buzz me.

    about vibrating and ringing at the same time, provided you upgrade the OS on your device from 4.x to 5.0 then this option will be available without requiring to install a third party application like BuzzMe.
    About the ringing, if you are not pleased with the current ring you are using you can of course change it to another. For example of of the series which name starts with Ringer_BBPro_ . It will ring every second.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • I can't get my phone to ring it will vibrate but no ring tone. How  can i fix this?

    I cannot get my iphone 4 phone to ring it will vibrate but no ring tone. How  can i fix this?

    Check:

  • I can not get the phone to turn back on. My email had been blinking off so I tried turning it off. After holding down top button and bottom button it the apple sign came up then went out as it has before when I have approached it this way. But now no go.

    My phone is dead it will not turn back on after taking a step I have used in the past when I have had issues with the phone. In the past I haeld the top button and the button on the face down and it will turn black then the apple sign comes up then off. I can then turn it back on and it seems to be reset and all is good not so today. It will not turn back on.

    1. Plug phone into AC adaptor and charge for at least 30 minutes
    2. If not on, reset phone: press both home and power buttons for at least 10 seconds, releasing when the Apple logo appears.
    If no reponse to above, there is hardware damage and you need to take it to Apple or whoever provides iPhone service in your country.

  • My iphone 5 is frozen on the screen that shows a cable and itunes symbol.  I can not get the phone to enter DFU mode and itunes does not recognize the phone when plugged in to itunes.  The phone was mid update when it was disrupted....

    I plugged my iphone in to do an update and it was mid way through the update when the phone was accidentally disconnected.  Now the phone is stuck on the screen that shows a cable and the iTunes image suggesting the phone needs to be plugged in to iTunes.  I have plugged it in, powered on and off, attempted to enter DFU mode numerous times all with no success.  ITunes does not recognize the phone and I continue to only receive the screen saying I need to plug in to iTunes..  Please help!

    Hold Sleep Button with Home Button toghether until it restarts Always it takes 8 to 15 seconds, after it restarts leave the sleep button and remember do not leave the home button it automaticlly switches to DFU mode.

  • How can I get my phone to ring so I can hear it?

    I cannot hear my phone ring and no sound when I get texts. Volume is set to high.  What do I have to turn on?

    Settings - Do not Disturb = Off.

  • TS1398 i have a iPhone 4. I am trying to connect to the Wifi at my house, and other places that have free WiFi. I can not get the phone to access any networks in order to connect. Could someone please help me try to figure this out.

    I just recently purchased a iPhone 4. I am using it as Prepaid for Verizon. I only get a certain amount of data time, and was trying to use the wifi at my house in order to do somethings online without using my prepaid data, but for some reason it will not pick up the wifi at all, and when i try all the different things I have been told to try it still does not work, how do I get the wifi to work?

    You didn't say what you have already tried, but if you haven't already done so, power-cycle your router (unplug it for 15 seconds then plug it back in), then on your phone go to Settings>General>Reset and tap Reset Network Settings, then try joining your wifi again.

  • HT4972 can not get my phone activate and says no sim on itunes help

    help my phone won't activate after up dateing and says no sim on itunes???

    iPhones are not unlocked by a code
    this is how it works
    http://support.apple.com/kb/HT5014

  • I can not get the phone to turn on after software update iphone 4s. it is showing the itunes and a cable, what should i do?

    I cannot getr my phone to turn on after a software update. it is only showing the itunes icon and a cable. What should I do /

    Hi patche,
    I would recommend you to connect the iPhone to iTunes and follow the steps provided,
    Once you connect the iPhone to iTunes you will be able to Set-up your iPhone on the iTunes itself with the available options.
    HOPE THIS RESOLVES THE ISSUE.
    Regards,
    Abhishek D.K

Maybe you are looking for

  • Error while provisioning to OID group

    Hi, we created 2 groups in OID. we ran OID group lookup Reconciliation task and now we are able to see the created Groups in Lookup.OID.Group. we added the Groups in access policy. but when we are Provisioning Users into OID the Add User to Group tas

  • Help! Trying to add bridge photo gallery to web page in CS4

    I am new to this and have created a photogallery in bridge.  I uploaded the files to my server and they don't appear anywhere.  How do I save them and then add to the page using dreamweaver cs4?   All of the tutorials I find show how to create them n

  • Create time-limited license for my application

    Hi, I have created an application for my client, but i would like to add in a function below into my software for license renew. For example, after the application is used in a PC for one year, it will be locked and will ask user to renew the license

  • Points didn't add to my account for purchase at Pacific Sales

    Hi, I purchased washer and dryer at Pacific Sales and gave My Best Buy™ account to the sales asscociate for the purchase order on Feb 27th. But when I checked my rewards balance today, I didn't see that part of points added to my account.  I checked

  • Time out configuration in SAP ME

    Hi, I would like to know how to define the time out in ME ? Is it something we can configure or is it a default value we cannot change ? Thanks for Help, Michaël.