I can not get the temperature to work.

Howdy
I just got my MSI FX 5900XT yesterday and it is running fine. However I can not get the temperature to show on it. I have tried everything I can find on the forums like the different registry hacks and such. And it still does not work.
In the one program 3D Turbo when it is first starting up it looked like the temps are trying to work then they just shut off. It stats to lite up and stuff they just goes down.
Anyone know of another program or something else that I can try to get it to work ?
Again I have tried everything that I have found on these forums that people have suggested so do not say try that stuff.
I know this card has a temp probe as the 5900XT cards from other companies works fine people tell me. So unless MSI done something and took it out it should be there and be able to work just fine.

Quote
Originally posted by The Black Wibble
Every piece of information about the card is obtained through the device driver so I say it is a driver problem. I'd uninstall the driver, remove all traces of msi/nvidia driver binaries and config files using drivercleaner. Deleting all references in the registry to MSI or nvidia might help, too, before rebooting and installing nVidia's 53.03 drivers.
Tony.
I purchased the card also from newegg and i have yet to get the temp sensor to work. I read in one reveiw that the chip for that is not in this card. Also that the overclocking program from Msi should not be used. I have searched all over for some info on the dynamic overclock technology DOT .The only mention of it is on the motherboard overclocking but it looks like its part of the video driver ? I have had very poor results trying to overlclock this card. 3d clock 450 ram 730 locks up all the time . I also run a amd 2400
[email protected] Let me know if im missing something on this card or not but dont want the hazzel of returning it

Similar Messages

After update to OS4.2.1 I can not get the ringer to work for incoming calls

after update to OS4.2.1 I can not get the ringer to work for incoming calls. If I set Vibrate on, that's the only notification I get. Tried everything including blowing away ALL my apps and restoring phone to new. Lost all my apps but the ringer still won't ring

God Bless u! LOL I have an otterbox case on my phone and had no clue that the mute button was there....Thank you so much!! The volume on my movies & everything else worked...even when I would go into "settings" and adjust the volume of the ringtone. I knew it was something simple...Thanks again..

Help, please! i can not get the sound to work on my pc

i can not get the sound to work on my pc

Try opening the device manager and remove your sound hardware and then rediscover. This works often. Let me know how it goes.
iGirlTech

I can not get the debugger to work on oracle studio 12.3 - It will not attach

I can not get the debugger to work on oracle studio 12.3 - It will not attach

APN for Tmobile is epc.tmobile.com
MMSC is http://216.155.174.84/servlets/mms
Here are the instructions:
Create devel catalog (appl from this catalog can damage your phone but don't have to so if you are not sure about your needs or skills dont use it and wait for official applications from Nokia or firmware update) The software hosted in Extras-devel is NOT ready for normal users! PLEASE PLEASE PLEASE don't play with it unless you really know what you are doing. Be ready to file proper bug reports instead of posting complaints. Expected problems: crashes, battery drain, poor system performance, full disk space & more - SERIOUSLY! Don't play with Extras-devel if you haven't backed up your data or are prepared to re-flash your device.
Application manager --> Application catalogs --> New
Catalog name: Extras-devel
Web address: http://repository.maemo.org/extras-devel
Distribution: fremantle
Components: free non-free
Refresh catalogue
Install fAPN and fMMS
Run fAPN and create new APN with MMS setting which you can get from your operator or find on this page (this may not be needed for all users, see note below)
Run fMMS and it will start with configuration
Put APN name the same you named your MMS APN point during fAPN configuration
Type MMSC which you can take from your operator
Type your number starting with +
Put max size of pics you want to have in outgoing MMS
Save all and start sending MMS from fMMS menu.
It is very important to put correct setting in new APN and be sure if there is proxy needed in your operator.
WHEN YOU GO TO MMS to set your configuraions, the information should look like this
MMSC: http://216.155.174.84/servlets/mms
Resize Image: 300
Your Phone Number: +##########
NOW U ARE DONE!! =)

My Macbook are from 2012, and i can not get the Airplay to work. Apple-tv3

Hello,
I can not get the Airplay work betwine my Macbook and Airplay.
Have read a lot about it online, and can not understand way its-not work. My mac is from 2012. have dobbel Chek. Also with Serial number on our site.
Do you have any answer for way its not work?

Update to Mountain Lion, or higher, which is required.
Troubleshooting AirPlay

Can not Get the Sample Recording working

Hi All,
This is the first time using LCCS, and my questions are:
I used the LCCS sample Recording and I cann’t get this to work
How to you register a repository for a given developer account, the document is not clear on how to do this
I am having problems sharing my screen, do I need to place everything in a ConnectSessionContainer or can I use ConnectSession?
Can anyone help me with this?
Thanks
Chaz

Hi Lorraine,
I presume that the TV is actually switched to your Joytech AV device ? I presume it gives some kind of signal so that you check that the TV can actually detect it. I once spent a happy few hours trying to use my TV in this way only to find it was switched to the composite inputs not the S-Video one. ;-)
regards,

I can not get the FMMS to work on tmobile network

I downloaded the FMMS app and try to send mms but it keeps giving me an error for APN location. the only apn location available is tmobile internet and below there is a mmsc: http://... I also am not sure what goes in there as an address.and what would be the resize 120? 200?
Can anyone help me out please or tell me that this app actually works? thanks

APN for Tmobile is epc.tmobile.com
MMSC is http://216.155.174.84/servlets/mms
Here are the instructions:
Create devel catalog (appl from this catalog can damage your phone but don't have to so if you are not sure about your needs or skills dont use it and wait for official applications from Nokia or firmware update) The software hosted in Extras-devel is NOT ready for normal users! PLEASE PLEASE PLEASE don't play with it unless you really know what you are doing. Be ready to file proper bug reports instead of posting complaints. Expected problems: crashes, battery drain, poor system performance, full disk space & more - SERIOUSLY! Don't play with Extras-devel if you haven't backed up your data or are prepared to re-flash your device.
Application manager --> Application catalogs --> New
Catalog name: Extras-devel
Web address: http://repository.maemo.org/extras-devel
Distribution: fremantle
Components: free non-free
Refresh catalogue
Install fAPN and fMMS
Run fAPN and create new APN with MMS setting which you can get from your operator or find on this page (this may not be needed for all users, see note below)
Run fMMS and it will start with configuration
Put APN name the same you named your MMS APN point during fAPN configuration
Type MMSC which you can take from your operator
Type your number starting with +
Put max size of pics you want to have in outgoing MMS
Save all and start sending MMS from fMMS menu.
It is very important to put correct setting in new APN and be sure if there is proxy needed in your operator.
WHEN YOU GO TO MMS to set your configuraions, the information should look like this
MMSC: http://216.155.174.84/servlets/mms
Resize Image: 300
Your Phone Number: +##########
NOW U ARE DONE!! =)

Satellite Pro M70: Can not get the TV OUT working

I have connected my laptop to my TV via the TV-OUT socket and a 4 pin S-Video lead. I have turned on the TV as an output in the advanced settings of my graphics card. I have selected TV via the Fn-F5 keys and I get nothing on my television.
Can anyone suggest what I might have left out to make this work?
The S-Video lead is new and the hook up to the TV is via a Joytech AV Control Center 2.
The Joytech unit is operational and the video lead appears OK as the Fn-F5 key press indicates that a TV is available - this disappears as an option if I unplug the video lead from the Joytech unit.
Any help would be greatly appreciated.

Hi Lorraine,
I presume that the TV is actually switched to your Joytech AV device ? I presume it gives some kind of signal so that you check that the TV can actually detect it. I once spent a happy few hours trying to use my TV in this way only to find it was switched to the composite inputs not the S-Video one. ;-)
regards,

I have photoshop elements 11 and I can not get the encoder to work

I have photoshop elements 11 and when I put the code in for the encode to be activation .It keeps coming up with the code is not right.

See if this helps any:
http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

I have IMac 10.7.5 Lion I use I forgot the password and I did a few fixes from the we sites, which did not work and now I can not get the computer to reboot the gray screen comes on and if a shift c I get a load bar and it goes half way and help

I have IMac 10.7.5 Lion I use I forgot the password and I did a few fixes from web sites, which did not work and now I can not get the computer to reboot the gray screen comes on with the apple and if a shift+c, I get a load bar and it goes half way and stops, I can get into the black screen area with the hard drive info
I did the following:   mount -uw /    rm/var/db/.AppleSetupDone    shutdown/uses/us reboot Ok I know I should not have, but now I need help to reboot and hopefully not lose everything on the desk top, Linda Markle

You did the wrong things. In the future it's a good idea to remember not to do something when you don't know what you are doing and what happens when you do it.
Forgot Your Account Password
For Lion, Mountain Lion, or Mavericks
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see:
       Reset a Mac OS X 10.7 Lion Password
       OS X Mountain Lion- Reset a login password,
       OS X Mavericks- Solve password problems,
       OS X Lion- Apple ID can be used to reset your user account password.

I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click warp

I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click warp text, it wont let me. Just sounds the ding, alert, can still slightly navigate the program but can not use any other tools after clicking warp text. I just have to open task manager and close the program. not sure if I'm doing something wrong or maybe I just need to uninstall and re install. Having trouble finding out how to uninstall and reinstall because the program came pre installed on my desktop.

It actually sounds like the warp text window is opening off screen.
Resetting the photoshop elements 10 preferences should fix it.
*Press and hold the Shift+Ctrl+Alt keys just after you start the launch of the photoshop elements 10 editor
*Keep holding the keys down until you get a dialog asking if you want to delete the adobe photoshop elements setting file
*Press Yes

I can not get the flash player plug in to work with Internet Explorer

I can not get the flash player plug in to work with Internet Explorer

Zoltan71 wrote:
I just bought this computer. My Internet Explorer is version 11.0.1
I have the box checked to Install new version automatically, but it has not done any upgrading.
I can't get the computer to update anything as far as I can see.
The flash plug in does work with the Crome browser but it will not work with Internet explorer.
I looked in the manage add-ons and it says enabled.
I also went into the safety tab and deselected
Active X filtering.
Restarted and still does not work.
I need help.....
Chrome uses a different and separate plug-in.
There are things about IE you need to know, especially 11. Specifically:
"User-Agent Strings"
That doesn't mean a lot, I'm sure, but it's the root of your problems, and Flash Player has nothing to do with it.
Microsoft "rewrote" the User-Agent Strings for the abomination they call their latest and greatest browser. User-Agent Strings are what websites use to identify the browser you're using and provide the proper content for it's browser engine, like ActiveX stuff, and Flash or HTML5 video. Thanks to the geniuses in Redmond, WA, the User-Agent Strings for IE11 (which has a Trident engine), ID it as either "Gecko" (Firefox) or "Webkit" (Chrome). Problem is: when the site the directs to the content for one of these two engines, the Trident engine in IE can't intepret it and the site then sees IE as an "unidentified" browser.
The problem with an unidentified browser is that the plug-ins in that browser aren't recognized either, so even though you're up to date, it says you need the latest Flash Player when you use IE11. YouTube... has converted to HTML5 video so if it doesn't detect Flash Player, it can display HTML5 (MP4) video which requires no plug-in to play. Facebook can't do that, because HTML5 doesn't apply to games... only video.
Microsoft has no plans to "fix" the mess they've created because they think it's a great idea to block you out of the websites you visit.
They recommend using "Compatibility View" and pretending that you're using an older verison of IE... Problem with that is that it's seen limited success, and you have to enable it for EVERY page that has problems... individually.
I'm not big on "pretending" so I recommend actually using another browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

I have just won an iphone 3gs in a raffle but when i put in my sim it tells me that it is not supported how can i get the iphone to work

I have just won an iphone 3gs in a raffle but when i put in my sim it tells me that it is not supported how can i get the iphone to work?

In that case the procedure assuming it is a PAYG phone is to get an o2 PAYG sim, put £20 on it and then make a few calls making sure you leave £15 on the sim to pay for the unlock. Then there is an online unlock request form on the o2 site just fill this in. It takes between 1-14 days and you get a message from o2 telling you how to complete the official unlock through iTunes.
I got my o2 unlock in nov 09 so this is not just opinion.

HT5701 Downloaded Safari 6.0.4 and my software is not up to date to run it. I can not get the old version of Safari to work again.

Downloaded Safari 6.0.4 and my software is not up to date to run it. I can not get the old version of Safari to work again.

Open  > About this Mac, and tell us what OS X version you have. If it's 10.8, reinstall OS X 10.8.3 > http://support.apple.com/kb/DL1640
If, after reinstalling the update, you still can't use Safari, hold Command and R keys while your computer is starting and reinstall Lion or Mountain Lion

HT1386 I have an app called ipieta which was originally downloaded onto an ipod. I gave the ipod to someone else, but now that I've had the iphone I can not get the audio even though it is downloaded into itunes music like it said to do. It won't work.

I have an app called ipieta which was originally downloaded onto an ipod. I gave the ipod to someone else, but now that I've had the iphone I can not get the audio even though it is downloaded into itunes music like it said to do. It won't work. I've tried more than several times to get help but nothing helps. Do I need to deauthorize the ipod or perhaps erase all the downloaded ipieta stuff and start over?
Thanks for any suggestions

Sorry. There's nothing anyone can do. The current version of the facebook app will not run on 4.2.1. The iPhone 3G won't run anything higher than 4.2.1. You're stuck.
Maybe it's time to buy yourself a new iPod Touch.

I can not get the temperature to work.

Similar Messages

Maybe you are looking for