I can not get website to work with ShockWave

I don't know where to post this, but I need some help with it.
Back in 1997 I was using Director, which I no longer have. At that time I created a website that contained some interactive pages where I had used Director to create content the required using Shockwave.
I now have a MBP running system 10.6.2. I tried to open the pages in Safari and I get a dialog box telling me:
"Some content on the page can’t be shown because its MIME type is unspecified."
I downloaded Shockwave and Flash from Adobe, I restated my computer and still get the same message. I am not sure if ShockWave works with 10.6.2 or not.
I am wanting to get the content of the pages so that I can use them on something else. If I could open the interactive pages I might be able to copy and past them off the webpages. Or if I could open the files with some other program then I could recover the content. Recovering the content is my goal, not running the interactive files online.
Anyone have a suggestion?

HI,
It's possible (more like probable) the software you used to create the site isn't compatible with the latest version of Flash. I'm pretty sure why you are getting this... "Some content on the page can’t be shown because its MIME type is unspecified."
Go to the Adobe Director support area here...
http://www.adobe.com/products/director/
You can ask their customer service for suggestions so you can extract the data from your site.
Carolyn

Similar Messages

HT4108 I have a hdmi connector and can not get a picture to come on my tv. Need help also bought the RCA cables and can not get it to work with my iPhone 4 g

I have a hdmi dock connector and can not get it to show on my tv. It's a iPhone 4g please help also have a RCA cable to and can not get it to work either

With what apps? Not all apps require video output.

IPhone 4 quit vibrating n can not get it to work with ibrate

Can any one help me my iPhone 4 quit vibrating n I can't get to work

Hey Little poignant,
Thanks for the question. I understand that your iPhone 4 is no longer vibrating, let's double check the settings to make sure everything is configured properly.
Settings > Sounds > Vibrate on Ring (Make sure this is ON)
Settings > Sounds > Vibrate on Silent (Make sure this is ON)
Settings > Sounds > Ringtone > Vibration (Make sure this is not set to "None")
If the above settings are configured properly, we'll need to isolate this issue further. I recommend restoring your iPhone as outlined in this article:
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Thanks,
Matt M.

I can not get Safari to work with my Alienware MX18 running Win 7 Pro 64Bit

Any suggestions on how to correct the problem?

Could you walk us through the problems you're having with running Safari, please?
(If you get an error message, let us know what it says. Precise text, please.)

I use incredimail for my email and can not get it to work with foxfire for sending links etc

i will try to email a link and at first it went to outlook but i use incredimail so i need to know how to make it launch incredimail
== This happened ==
Not sure how often
== everytime i try to send a link

See this KB article.
[http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox]

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host>

I have a pioneer 50 inch plasma   I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.   The receiver has two HDMI inputs in the back.

I have a pioneer 50 inch plasma + I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.
The receiver has two HDMI inputs in the back. However they say they are not for PC's. Furthermore they must be set up by going to the home menu.    I tried everything, but I can not get the receiver to talk to the Apple TV. I even tried a connector that uses an HDMI to the Apple TV that has the other side of the cable as 5 RCA cables. I could not get the receiver to see the Apple TV.   I have a newer TV in the house, it has no problem talking with the Apple TV. But this older system seems to be handicapped in its ability to talk with the newer Apple TV system.
My Email is [email protected]
Do you have any suggestions
Thanks
Bob

I could not access the Apple TV on the television.   If I put the Apple TV directly into by TV, I have an external sound system (entertainment system), therefore I worry that I would by pass the audio.
Thanks for taking your time to attempt to help!   Any more suggestions would be greatly appreciated.
Bob

Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. t worked, but only for those with PC. I could not get it to work with Apple Yosemite even with reader installed . is there a way i can make it work for apple /

Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. It worked, but only for those with PC. However, I could not get it to work with Apple loaded with Yosemite even with reader installed . Is there a way i can make it work for apple / Mac? It worked fine on a mac using Mountain Lion and reader
Thanks

LiveCycle = XFA forms.
afaik - These cannot be used in Apple OSs.
Be well...

Email messages from my icloud account update on all my devices showing if they have been read and if a reply has been sent. This does not happen with my tinyworld (TalkTalk) email account. Can I (how can I) get this to work with TinyWorld?

Email messages from my icloud account update on all my devices showing if they have been read and if a reply has been sent. This does not happen with my tinyworld (TalkTalk) email account. Can I (how can I) get this to work with TinyWorld?

You have to look at the email protocol being used. the Apple email system uses IMAP, does Tinyworld use IMAP or POP?
Does the email system permit delivery receipts to be requested?
Just some of the things one needs to determine from the information provided by the email service provider.

My printer is a fairly new all-in-one Brother MFC-7860 DW. It is not listed in the iPad AirPrint printers. Can I get it to work with my new iPad2?

My printer is a fairly new all-in-one Brother MFC-7860 DW. It is not listed in the iPad AirPrint printers. Can I get it to work with my new iPad2?

If it's not an Airprint enabled printer, you can not natively through your iPad. BUT, there are apps you can purchase in the App Store, like Print Central ($9), which is what I use myself and works well for my needs.

I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?

I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?

The latest Apple driver support begins with the MP 171.
Here is Ricoh's official driver download page specifically for the Afico MP 161. Note that new drivers for this device were released on Aug 2, and include Lion and Mountain Lion.
Hopefully, this will solve your device issues.

HT1203 i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

It is almost as if the program does not exist on my computer. If I search for it, the only thing that comes up is the installer. I cannot find it anywhere despite the fact I have installed it numerous times, uninstalled it and conducted a fresh install, and the Adobe website checks says that it is installed.

How can I get Lion to work with label printer- Brother QL 570 or Dymo 450 Turbo?

I can't get Lion to work with label printers, either Brother QL 570 or Dymo Turbo 450. I want to uninstall Lion and use Snow Leopard unless there is a way to make Lion work with these devices. Any ideas?

Dymo has released new drivers since Lion came out. Have you downloaded and
installed them from the Dymo website?
Some people have said that their Dymo label printers were set to off line by Lion, but
worked fine after going to Print & Scan, selecting the Dymo printer, and making sure
it was active/on-line. I had to do that with my Dymo 450 Label Writer.
I cannot offer any tips about Brother, but you may wish to check their website
for latest drivers.

HT1212 Old ipod, can not get it to connect with itunes & i no longer have the computer it was once synced to. It will not allow me to do anything but turn it off & on.

Old ipod, can not get it to connect with itunes & i no longer have the computer it was once synced to. It will not allow me to do anything but turn it off & on.

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

The air port on my imac went off and i can not get it to work

my air port on the imac weny off and i can not get it to work now

Apple used to use airport name for everything.. is this the internal wireless card?? Or external airport router?
If it is the internal wireless card, is it still listed in system profile.. and do a hardware test with your original CD.
See http://support.apple.com/kb/ht1509
The problems with Mavericks are very great.. if you upgrade installed anything can happen.. a common feature is the internal wireless card fails to work.
Give details and we can figure it out.
Here is discussion about the same thing as I think has happened to your imac in macbook.
https://discussions.apple.com/thread/5219345?tstart=30

I can not get website to work with ShockWave

Similar Messages

Maybe you are looking for