I can not import in Lightroom 4.4 any RAW-file from my D600. Lightroom gives no picture.

How long have you waited?
When I connect my D600 via USB and import in Lr it takes a long time before the image thumbnails are displayed in the Import Dialog.
I know that using a card reader would probably be much faster (you gotta try that!).
In the meantime I just do something else for 5-7 min (read e-mail, get a cup of coffee) and thereafter the thumbnails are displayed and import is straightforward.
And I do have a powerful and fast system.
So, somehow Lr and the D600 are slow to begin "talking" to each other.

Similar Messages

How to work with raw files from Nikon D600 in Lightroom 3

I need to know how to process my raw files from my Nikon D 600 camera in Lightroom 3.6 and Photoshop 4?
Message title was edited by: Brett N

Support for the D600 was added in Lightroom 4.2.
Updates are no longer released for Lightroom 3. The final update, 3.6, did not support the D600, so you cannot open raw files from this camera natively.
You can use the DNG Converter to change your NEF files into open source DNG files that will open in any version of Lightroom, including 3.

I can not get my new Nikon D 810 raw file to load into Lightroom. I have been doing this same thing for over a year using a Nikon D800.

when I go to add my raw files like I always have it said that it can not read these raw files. I called Nikon an was told that the raw files in the D810 are the same as the D800. Something is up.

Re: D810/Lightroom5 importing Raw files
The raw files are not the same as the D810 has a different sensor than the D800. The file layout might be the same but that doesn't mean any software that supports the D800 will support the D810. Adobe has to profile the new camera and add calibration profiles and then release an update to Lightroom. ACR 8.6 RC supports the D810, so LR 5.6 will probably support the D810 too. For now, you could convert the nef files to dng using the dng converter that comes with ACR 8.6: Adobe Photoshop Camera Raw 8.6 RC for CC and CC 2014 Release Candidate | digital camera raw file support - Adobe Labs

Can not import excel spreadsheet with more than one spreadsheet from an email

i get excel files sent to me all the time by email and have been able to open most of them. Went to a apple store and was told i needed to install numbers app on my iphone 4 to open them up because their was more than likely two or more work sheets in that file. i am on the road and can't get to my imac. I bought numbers did all the updates on the iphone and sync to itunes. it still cant open the spreadsheets if they have more than one work sheet. it does ask do you want to open in numbers i answer the question it starts the import then get error message spreadsheet couldn't be imported. the file format is invalid.
this is frustrating to by an app that was suggested by apple for the solution and it doesn't work.
by the way i have excel on the macbook pro and imac so that is not an issue need to be able to see on the phone while traveling.
by the way it says microsoft excel 97-2004 worksheet 16 kb open in "numbers"
Any suggestions

Hi Caroline
you should be able to apply the exact same principles to your multi query report. The XML will have a main root node and then the results of the queries underneath.
So if you had 3 queries you'd get something like
<REPORTNAME>
<G_FIRST_QUERY>
</G_FIRST_QUERY>
<G_SECOND_QUERY>
<G_SECOND_QUERY>
<G_THIRD_QUERY>
<G_THIRD_QUERY>
</REPORTNAME>
In the template you will be able to map on to the separate sections of the XML very easily.
regards, Tim

I downloaded the newest version of camera raw for LR. I have LR4 and can not import photos from my new Nikon D750. The download said it was sucessful but I still can not import photos.

I downloaded the newest version of camera raw for LR. I have LR4 and can not import photos from my new Nikon D750. The download said it was sucessful but I still can not import photos.

Lightroom doesn't use the Camera Raw plug-in. So downloading the latest Camera Raw didn't do anything at all for you. The only way to update or upgrade Lightroom is to obtain the latest version. If you have Lightroom 4 then the last version of Lightroom you can have at no additional cost is Lightroom 4.4.1. If the camera you are using requires anything newer than what is supported and that version of Lightroom then it will require an upgrade to Lightroom 5.

Why Won't Lightroom 3.6 Import Camera raw files from T5i

I have Lightroom 3.6 all updated. I can't Import any raw files from my T5i
I have also tried using Adobe DNG but it will not read the files either.
Any Help would be Awesome
Thanks

You need LR 4.4 or DNGC 7.4 or newer for the T5i:
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
It is mislabeled as T51 on Adobe’s page.

Lightroom 5 won't import RAW files from Nikon D7000

Since the last two updates of Lightroom 5 I cannot import any RAW files from a Nikon D7000. I have imported thousands of photos previously in RAW from the same camera, and even iPhoto has no issues importing them. I just get an error every time, even though it shows a preview of the photos on the card.

What error are you seeing when you try to import?

I can not import photos into lightroom 4.4 Had no problem before this time.

I can not import photos into lightroom 4.4 Had no problem before this time. I have camera raw7.4 and use a NikonD7100. I have a Mac using 10.6.8. I can see the images and selected for import in Lightroom, but after I check "import" I get a message that Lightroom could not read the files. This happens with both raw and jpeg files. Thanks for a repl

thanks for the reply. would you please tell me how to check for the folder to have write permission. I have done the same settings as before but this time does not transfer. It says can not read files with a code "298". I can see the thumbnails on the screen prior to trying to import the photos, also can see them with the card in the camera and using the view mode. I have up to date camera raw 7.4 for my Nikon D7100 and the settings allow for 7.1 and above

Lightroom 4.4 will not import NEF RAW files from Nikon D610

I shoot a Nikon D800 and have never had any issues importing my NEF RAW files into Lightroom. I borrowed a friend's Nikon D610 and shot a bunch of NEF RAW files. I downloaded them to my computer the same way I always do. For some reason, Lightroom will not import them. The error message is: "The files are not recognized by the raw format support in Lightroom. (455)"
My Lightroom 4.4 is current and up-to-date.
Bottom line: I have a bunch of RAW photo files I can't import into Lightroom for editing. Any help would be GREATLY appreciated!

>Just curious -- is there some difference between the NEF files created on my Nikon D800 (which are easily imported into Lightroom) and the NEF files created on the Nikon D610 (which are not easily imported into Lightroom)
Lightroom 5 supports the D610. There is a big difference between nef from the D610 and older cameras. They were shot with a camera that Adobe hadn't profiled yet when LR 4.4 was out. Otherwise, if you hack the nef files to read that they were shot on a D600, LR 4.4 will read them, but I would caution against doing that as the sensor is slightly different on the D610 than on the D600, resulting in differences in color rendering. Simplest is as dj says to convert the nets to dng (which embeds the newer profiles in the file) or to upgrade to LR 5.

Why does not Lightroom allow me to import RAW files from my Canon 5D Mark III?

Why does not Lightroom allow me to import RAW files from my Canon 5D Mark III?
Error message that it does not support cr. file

Which version of Lightroom?
As Hal points out, if it's pre v 4.1, you can't expect an old version of the software to know what to do with a camera that didn't even exist when the software was released.
Given how many times a day this same issue comes up, maybe it's time Adobe changed the error message to something like "your camera is too old to be supported by this version of Lightroom. Please upgrade" or similar...

I can no longer import raw files from my Panasonic Lumix LX5 into Aperture 3.3.2 - raw files from my other Canon cameras are fine. Am still running Lion - NOT Mountain Lion. Tried all available software updates - no joy. Any ideas please?

I can no longer import raw files from my Panasonic Lumix LX5 into Aperture 3.3.2 - raw files from my other Canon cameras are fine. Am still running Lion (10.7.4) - NOT Mountain Lion. Tried all available software updates - all up to date apparently but still no joy. OS X Lion shows the LX5 as a supported file format. I dont want to have to upgrade to Mountain Lion just to see if this solves the problem. Any ideas please.

Since when did this happen? Directly after you upgraded to Aperture 3.3.2?
If it happened directly after the upgrade the problem may be, that the raw support for your camera got lost. For some posters it helped to register the raw support again, see this post by Alan Roseman:
Aperture 3 preview of raw file greenish
If this does not help, you may need to reinstall Lion to bring back the raw support.
But if the problem occured independent of a new installation, ypu may have a problem with your camera or the card you are using. Have you tried to use a different card or to reformat the card in the camera?

I can not import photos from PC to my Ipad, it says iTunes will no longer sync photos to the iPad

I can not import photos from my PC to the iPad, it says iTunes will no longer sync photos to the iPad

YES Terence! Thank you. Exporting allowed me to move my photos from iPhoto into the Burn Folder on my desktop. But that doesn't explain why I'm having to go that route now. Have I done something (accidentally changed some setting) on my computer that will not allow me to just click and drag anymore? I really liked the convenience of the click and drag option.
I don't have the time tonight to export and burn a lot of CD/DVDs. I'll try that tomorrow and make sure my photos are moving properly. I also need to export photos to my external hard drive to make sure that route is working.
Wouldn't you know that my Apple Care Plan runs out this Wednesday?! I need to make sure everything is working properly before that expires.
Thank you so much for your help. I really, really appreciate it.

Can not import Outlook 2007 .CSV or .PST files into Outlook 2013 on Win 8.1 64 bit

I have a new computer (Sony VAIO Pro 11 Ultrabook) with a brand new install of Win 8.1 - 64 bit and MS Office 2013 Professional Plus. Everything works fine EXCEPT I can not import my contacts or calendar from Outlook 2007 Win 7 - 32 bit into the
.msn folders in each case. I can open .pst files in Outlook 2013 but they open in a local file and when I copy and paste them into the Exchange ActiveSync .msn contact and calendar files so that they will sync with Outlook.com Outlook 2013 crashes.
It can't even be reopened unless the wireless is turned off, and then you have to create a new data file as a default and then delete the old account and re-establish it. I have tried using the import functions as well with both
.CSV and .PST files that were exported from Outlook 2007 and an error message stating that this is not supported comes up. I have also tried to turn on sync with my iPhone to see if the files will sync from the phone through Outlook.com and nothing happens
there either - no sync on the web and nothing at the PC. Email works fine after adding the account again etc.
None of the procedures on the forums work (open PST file in the local folder then copy/paste, drag/drop, or move the files) so please don't respond with those links. All result in crash. Does anyone at MS know what's up with their latest
and greatest SW?
Thank you for your assistance.

Import the calendar and contacts in Outlook.com. For contacts, export from Outlook as csv and import into Outlook by choosing the Other option (https://people.live.com/import/other?biciid=ImportCatalog)
You'll need to save the calendar as an ics file to import it. Select the calendar folder, the File, Save as an save as an ics.
Diane Poremsky [MVP - Outlook]
Outlook & Exchange Solutions Center
Outlook Tips
Subscribe to Exchange Messaging Outlook weekly newsletter

I can not import 60p files from Sony NEX-FS100U to Final Cut Pro X.

I can not import 60p files from my Sony NEX-FS100U to Final Cut Pro 10.0.1. Does Sony offer a plug in?

I shoot fishing footage of big catches. Slow motion playback appears to me to be much better when shot it 60p even compared to 60i. It also blows away all of the other formats for a "still" grab. Thank you for your help as I did a search and downloaded Clip Wrap which converted the files to .mov and they actually do import the full 60 frames. Thank you again for your reply.

I can not import pictures from iPad into Aperture

I have an iPad 1, latest iOS. I shoot Nikon RAW files that I import unsingh the camera connector kit (CCK). I use Aperture, again latest version. All of that in OS X latest and greatest on an iMac (March 2009).
I simply can not import pics from the iPad onto Aperture.
AP3 does see the iPad when I go in import mode (CMD I) and does see all my pics (just came back from vacation with 3000+).
Importing All starts the process, the import wheel spins, but the nothing happens . If I double click on the "Importing..." message to see the scheduled tasks, I do see that a number of importing tasks are scheduled.
However, no progress is ever made.
Any ideas?

Are you connected to the wi-fi and/or 3G

I can not import in Lightroom 4.4 any RAW-file from my D600. Lightroom gives no picture.

Similar Messages

Maybe you are looking for