I can not install my wireless P2015 dn Laser Jet Printer with the MS 7 software.

For three years the P2015 worked "wireless"on my Lenovo T60p with microsoft XP.  It ran through my wireless router and printed fine. 
I just updates the software to MS 7 (32 bits, 2007) and the printer will not run off the router.  I hooked the printer up directly by cord, downloaded the printer drivers off the MS 7 software and it worked fine while attached.  The router works fine with MS 7 for the internet and the email on my computer and the two other computers (still MS XP) on the router.
I tried installing the 2015nd Laser Jet using the CD driver it came with originally and I come to a screen "searching for available printers" and there is nothing in the box below to choose from (blank screen).  It goes though a "searching for available printers" routine and finally the message come up "No printers were found".  This same thing occurs when I try downloading from the HP Web site drivers.  I get the same screens and the same results. 
What do I need to do?  (I am a beginning level of computer knowledge)
This question was solved.
View Solution.

Hi Edronenburg,
Even though the software installer can not find your printer automatically, you can still install the printer if you know the IP address.
If you press and hold the "Go" button on the control panel for several seconds (until the lights begin flashing) the config page will print. On this page you can find the IP address of the printer that has been assigned by the router. During the software install, instead of having the installer automatically search for the printer, choose to manually enter the IP address. This should allow the software install to complete successfully.
(Although I am an HP employee, I am speaking for myself and not for HP.)

Similar Messages

  • Can you install logic pro onto more than one computer with the same cd key?

    can you install logic pro onto more than one computer with the same cd key?

    Only a desktop and a laptop, both of which must be Macs you own.
    (60296)

  • COMPATIBILTY OF MY WIRELESS OFFICE JET 4500 G510N PRINTER WITH THE IOS AIRPRINT SOFTWARE

    IS MY WIRELES OFFICE JET 4500 G510N PRINTER COMPATIBLE WITH THE IOS AIRPRINT SOFTWARE IN THE IPAD2
    This question was solved.
    View Solution.

    No. You can use it with the ePrint mobile app for iOS devices. You can find out more by following the links below. Hope this helps.
    Supported Printers for the HP ePrint Mobile App or HP ePrint Home & Biz:
    http://goo.gl/RsNpf
    HP ePrint Mobile Apps FAQs:
    http://goo.gl/33WFq
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Can I install on my MacBook Pro and Windows PC with the same account?

    Hello
    I have a Mac and a PC(Win), now I am thinking about purchase Creative Cloud, can I install on my OSX and Windows? Or I need to buy 2 license?
    Thanks you all.
    Michael

    Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
    -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
    -Windows or Mac does not matter... 2 on the same operating system, or 1 on each

  • I can not install Windows Media Player plugin when i'm using the beta version of Mozilla. Even after the installation, it doesn't work.

    Windows Media Player plugin doesn't work with the beta version of Mozilla.

    Make it easier. C:/Program/Mozilla Firefox (the old installation) and copy the entire folder "plugins". Now go to the path of the Firefox beta installation and paste the folder. All the old add ons will work. Bye

  • Why can't I find/access my recent downloads and imessage with the new IOS software update?

    I just recently updated my phone to the new IOS 7 software. I had to do this using my computer. It updated ok but now when I try to find apps that I downloaded (from the computer again) I am unable to locate them. I did find one app that was downloaded but when I click install nothing seems to be happening. I have turned the phone off and on several times hoping it would reset but nothing. I am also unable to access imessage for some reason. Help!!!

    You can't update your iPad past iOS 5.1.1
    Many iPad 1 owners reported slow downs with iOS 5.
    Under the Settings app, General category under About, how much storage capacity does your iPad have left?
    You could try a hard restart or reset by holding down the sleep/on-off button and home button simultaneously.
    Once the screen goes black, wait about two seconds, then let both buttons go.
    See if this changes anything.
    Good Luck!

  • My iPad 1 can not scan for wireless networks

    My iPad 1 can not scan for wireless networks

    it happends to me sometimes. put the plain mode for a few seconds. you can after go to normal function. normally my iphone start searching for the wifi just after that !

  • I can not install Windows 7 By applying Boot Camp

    Hi
    I have a problem
    I can not install Windows 7
    By applying Boot Camp
    I have a message appear
    Boot Camp does not support installing Windows on this Mac.
    Boot Camp does not currently support installing Windows on a Mac with a 3 TB hard drive.
    Hardware
    3.4GHz Quad-core Intel Core i7, Turbo Boost up to 3.9GHz
    32GB 1600MHz DDR3 SDRAM - 4x8GB
    3TB Fusion Drive
    NVIDIA GeForce GTX 675MX 1GB GDDR5
    Apple Magic Mouse + Magic Trackpad
    Apple Wireless Keyboard (English) & User's Guide
    Accessory Kit
    Software
    iLife '11
    OS X Mountain Lion
    Apple did not you tell me about this problem at the time of purchase 
    Is there a solution to the problem ?

    Unfortunately, I can not partitioning Alhardsk such manner described Palmqal
    http://im32.gulfup.com/mGuB1.jpg
    http://im36.gulfup.com/hLrW1.png
    http://f.cl.ly/items/04323L1k173F1r2h0v3b/Screen%20Shot%202013-01-30%20at%203.56 .21%20PM.png
    Is there another application that divide Alhardsk ?

  • Can not install device driver in Windows 8.1

    I can not install driver of my webcam(Odyssey OD 202) windows 8.1 (upgraded from windows 8)
    The USB webcam is shown in Device manager.
    When I attempt to update driver and search for it automatically it shows the following message.

    Hi Atanu Barai,
    There may be a compatibility issue between the Microsoft driver and the device . I agree with ZigZag ,you may need to download the driver from the manufacturer website .Please pay attention to the compatibility ability issue with the
    Windows 8.1 when you try to download the driver.
    If the issue persists, try to plug in the device with another USB port to have a check .To verify whether it is caused by the USB controller ,we can try to connect another USB device to have a check.
    Meanwhile ,please check the Event Viewer for related information.
    Best regards

  • Can not install Ovi Store Nokia 603

    can not install shop. Tried to install four different versions, including misrepresented and that you download the browser when they click the icon.
    At the end of the installation says: "Installation not possible"

    Download this CWRT file to microSD card.  Turn phone off insert in phone turn on.  Then browse to CWRT file run.  Then open up web browser go download ovi store file install.  All fixed.
    Note:
    Make sure to install CWRT file in C:\  when prompt.  This will not get lost when phone get reset. 
    Attachments:
    CWRT Core 1.00(11124).sisx ‏810 KB

  • Can not connect my wireless printer to the new router.

    Can not connect my wireless printer to the new router.

    Can you please provide details:
    1.  The make and model of printer
    2.  Make and Model of Wireless Router
    3.  Is your printer connection wireless to router or a cable to PC
    4.  What have you done or attempted to do to establish a connection?
    5.  Any further info to assist

  • Can not install powerdvd10 on B540 which was uninstall accidently

    Can not install powerdvd10 on B540 which was uninstall accidently. When I try to install from downloaded exe. file 
    there was error message "This software can only be installed on a lenovo system"

    hi DILIPDKJ,
    Just to verify, is this the PowerDVD software that you're trying to install?
    PowerDVD 10 BD
    v10.0.3029.52
    IN12STW153WW5.exe
    114 MB
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • I can not install the newest version of iTunes because of a file that can not be found. This is what I am seeing:(The feature you are trying to use is on a network resource that is unavailable. C:\......\Application Data\Apple\Apple Software Update\

    I can not install the newest version of iTunes because of a file that can not be found. This is what I am seeing:(The feature you are trying to use is on a network resource that is unavailable. C:\Documents and Settings\Aubrie\Local Settings\Application Data\Apple\Apple Software Update\)

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
    http://majorgeeks.com/download.php?det=4459
    Here's a screenshot showing the particular links on the page that you should be clicking:
    After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
    Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
    When the dialog appears, choose to save the file.
    (2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Can Not  installed latest iTunes 10.5.2 for Windows XP

    To System support,
    I am having trouble installed latest iTunes 10.5.2 for Windows XP. When I start install the exe file, I got an error message:
    “There is problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.”
    Could someone tell me why I can’t install iTunes 10.5.2?
    I even fellow the trouble shooting from iTunes page by uninstall the older version of iTunes. Now I can’t even link my iPhone or iPad now. Please advise me on what is missing in my computer for costing this issue. Thanks for all your supports.
    My computer inf:
    System:
    Microsoft Windows XP
    Professional
    Version 2002
    Service Pack 3
    Computer:
    Intell(R) Core 2 Duo CPU
    T7500 @ 2.20GHz
    2.19 GHz, 1.50 GB of RAM

    “There is problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.”
    Perhaps let's first try updating your Apple Software Update.
    Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
    If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

  • I can not  install apps in my new ipod touch ios 6

    i can not  install apps in my new ipod touch ios 6
    it is showing appication is failed to installed
    why is this happening
    can any one help me....

    The problem is when i drag n drop downloaded apps from torrentz into itunes n syncronize it add those apps into my itouch ... but the message shown in my i touch is .. that application failed to install..
    in the itunes those appliacations are unchecked automatically ... but i can install apps which are downloaded from the istore .... they are working properly
    but the ones i downloaded from the torrentz are not getting installed..

Maybe you are looking for

  • Report Server Internal Error During Report Generation

    Hi, We are running 9iAS on Sun Enterprise server. Though we have successfully installed Form & Report Servers. The Form Server is running perfectly but while reports are generated from Report Server, it gives Internal Server Error (HTTP Error Code: 5

  • Drop-down in workbook

    Hi, If the drop-down picture can have a help to search, to be able to look for a value in concretly, beside being able to filter through other characteristics that help you to look for the above mentioned value. That is to say, I include a clients' d

  • Delete a char from string ?

    Hi, I want to delete a char from string. i used the following function. String f = formulla.replace('[',''); The above function doesnt work as it tells me to put a space or some char in 2nd parameter which i dont want. i just want to delete all occur

  • What should I do? i  have error while installing creative cloud desktop, i have error with number 1

    I am on the mac, and i don't know what should i do?

  • Echo commands on Nexus OS

    Hi,  When I enter any commands on my N5k's, I see echos of the full command, date/time stamp, and OS version: # sho run !Command: show running-config !Time: Wed Nov 26 15:42:04 2014 version 6.0(2)N2(2) <then running config is shown> Why is this?  It