I can not make a "Automated Installation of the Introscope Agent" (Managed System Configuration, p.7)
I can not make a "Byte Code Adapter Installation"
When I open meets both paragraphs in step Managed System Configuration is somewhat obscure situations that do not allow the automatic configuration Introscope agent and Introscope Manager
Please help to resolve a number of questions that might help me complete the setup :
1. Why has the status of Enterprise Manager : <No Enterprise Manager configured> ( see picture)
I set up Enterprise Manager in accordance with the installation instructions and complied with all the setting items . Since without any configuration can be associated with the appearance of this status ?
2 . Why Server Node is empty detail settings ?
JDK Location:
Enterprise Manager Host:
Enterprise Manager Port:
Introscope Agent Name:
Introscope Agent Profile:
Autoprobe Directives:
Wily Version:
Introscope Agent Version:
Introscope Agent Log Location:
3 . What a mistake ($ MC: DIAG_WILY_MSG: 032 : L), which appears when I click configuration "Configure Introscope Agent Setup ...", and what it can be linked ? ( see picture )
And the last question , which is also linked to the process of automatic configuration and refers to a phrase from the instruction (Introscope Version 9
Installation Guide For SAP July 2012) points out "Automated Installation of the Introscope Agent via SMD"
there is such an item:
2 . Deploy ISAGENTJ5 *. SCA which is the Introscope Java Agent 9 with SDM to Solution Manager. You may need to deploy also ISAGENT *. SCA which is Introscope Java Agent 8.
However, nowhere does it say where exactly ( on what the absolute path ) I must perform unloading and then what to do with this discharge
The problem was resolved a small manipulation - on stage Basic Configuration,
point 3 "Configure CA Introscope"
I forgot to add to the list of CA Introscope Enterprise Managers link to my manager.
Thus it is necessary to take into account that the path should be correct (usually for linux - /usr/sap/ccms/apmintroscope) and the directory should be applied appropriate privileges.
Then in paragraph "Byte Code Adapter Installation" - there are all the necessary data, and it starts to work correctly
Similar Messages
-
I can not make a wireless bridge in the band 2.4 Linksys wrt1900ac
I can not make a wireless bridge in the band 2.4 I make the same settings on band 5 and runs perfect
I'd check to see if the 1900AC can bridge two WiFi connections at the same time. It may only beable to bridge one or the other radio at a time. I know that with the 5Ghz radio is bridged on the 1900AC, the 2.4Ghz radio is running and working as a wireless AP.
-
I've got a new iphone 5 and i dont know why im unable to complete purchase of Apps from itunes store,i keep getting error message saying contact itunes store support to complete this transaction...i would really appreciate if anyone would assist in any way
If you haven't already done so then you can contact iTunes support via this page and ask them why the message is appearing (these are user-to-user forums, we won't know) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
-
hello, im unable to make an icloud account on my iphone, because whenever i make an account, a messege appears that this device has enough accounts so you can not make a new one, so the problem is that i dont konw about the perevious accounts, what should i do to delete pervious accounts and create a new one?
The problem is that there is a limit for creating new iCloud accounts from a device and if the previous owner already created three accounts with this iPhone you bought from him, then you would have to use another device in order to create a new one.
-
Software Prerequisites in managed system configuration are not fulfilled
Hello dear Forum,
I'm facing a problem when I configure a PI system in managed system configuration. I register the Netweaver PI AS ABAP technical system to solman's SLD directly(run RZ70), and collect the information of the Netweaver PI AS JAVA from the PI's sld. I don't know whether it matters.
The following error occurs when I Check Prerequisites:
J2EE-FRMW does not fulfill the prerequisites (installed: 7.11 SP0, expected: 7.11 SP001)
But I don't know how to find J2EE-FRMW 7.11 SP001 and do some update, please give me some advice.
Best regards and thanks for your help,
PanyHi Pany,
Steps to follow
- Rename the J2EEFRMW01_5-20002637.zip file to J2EEFRMW01_5-20002637.SCA.
-telnet localhost 5$$08
-logon with the user administrator
- deploy /software/j2eefrmwpatch/J2EEFRMW01_5-20002637.SCA version_rule=all
- Once it is done , then trigger the data to the SLD
- Checked the software component in SLD
- Resync the LMDB with SLD
- Then performed the activity of manage system Configuration.
With Regards
Ashutosh Chaturvedi -
I can not create an Installer on LabView, After install the Vision Builder Demo and then uninstall it. I can not create a Labview installer anymore, it asks me for a Vision Builder Installer, even if My Labview program does not have nothing to do with it...
Solved!
Go to Solution.Hi Shada this can happen if you are including additional installers to your installer for example DAQmx. When you are doing this the installer has to include other files like MAX (Measuremente and Automation Explorer). Probably when you installed Vision Builder it updated MAX, so when your installer is trying to Include MAX, its asking for the source where it was installed in your computer in this case Vision Builder.
Here you can cache the information so its not asked again, or you can download a newer version fo DAQmx, so it will update MAX and change de dependecy.
You can find more details about this issue in this KB:
KnowledgeBase 3S88PJMY: Why Do I Get A "Missing Distribution" Error When Trying to Build an Installe...
And for keeping a copy here is more info:
How Do I Stop the Missing Distribution Notification Each Time I Build An Installer?
Best Regards
Benjamin C
Senior Systems Engineer // CLA // CLED // CTD -
I updated my iPhone device for thw 7.1.1 update that was avalibe on 4-23-2014. when I did this my phone is prompting me to connect to itunes on my computer. My computer is no longer working and I can not make or recieve calls on my phone.
Sounds like the device is in recovery mode. You will need to restore the phone. See this support document for instructions. http://support.apple.com/kb/HT1808
-
I have two seperate itunes accounts on two seperate devices and i can not make an itunes purchase on either one. When signing into the account it ask for the answer to security questions. I have NEVER answered a security question for these accounts. Each time it is a different set of questions. This has only happend since the original devices have been replaced/upgraded. How do I fix this? There is money in each account and both have recieved itunes giftcards for christmas that they are unable to use!
sailsalot wrote:
I have a new ipad and have used the community to answer questions for myself. Your help has been great! I don't know how you got my sailsalot name from my Skype account but I signed in with you as "gags76" and got help with my new ipad. I discovered I used a different Apple id and password on my ipad from my computer (imac) and changed that. My e-mail is Could you email me if there is something I should do at my end. I have to use itunes to sync with my ipad so I have been going back and forth between the two. Should I sign in with my proper Apple id on my ipad?
Yes -
All- I get this message ("iPhone can not make or receive calls. Restore from iTunes" (happend once while on airplain mode and now once while in wifi only area, out of cell range)). iPhone 4. Newest OS. Never happened with old OS! Cycling phone on/off does not help. Ignoring message causes phone to cycle off then on. After first time this happened, I restored. Six days later...same problem! Clearly a new fix is necessary. Suggestions?
I have not tried that...I will look up the process so that I can do it correctly (and still transfer all of my files, contacts, etc). Any suggestions? What is the advantage of restoring as a new device..is this more akin to a complete wipe of a hard drive?
-
ello when i try to down load itunes if says "This installation package can not be opened. Verify that the package exist and that can access it. or contact provider" what do i do LOST
Hi MrJavonte15,
If you are having issues installing iTunes on your Windows machine, you may want to take a look at the following article:
Apple Support: Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
If you have previously installed iTunes and continue to have issues, you may want to remove and reinstall iTunes:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/ht1925
Cheers,
- Brenden -
I have one folder on an XSAN that one machine can not make changes to. Whenever I try to duplicate or copy a file in this folder I get 'The operation can’t be completed because an unexpected error occurred (error code -50).'
The permissions are fine, and I have trashed the finder plist and reset the NVRAM.
Anyone have a answer?
ThanksTips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
- make sure you have at least 10% of your harddisk in free space (I had only 5%).
- do a PRAM-reset (http://support.apple.com/kb/ht1379)
- perform a hardware test (http://support.apple.com/kb/HT1509)
- make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
- after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
So far I only cleared up some space on my HD, and already the problem occurs less.
Still, I will go through the other tips too.
(will post progress) -
when i burn videos to a dvd-r disc it works on my macbook but not on a windows/pc or my dvd player. How can i make it work on all the above and not just a mac product?
Unfortunately, the recording & movie industry does not respect the rights of the people who make them money, and thus you can only use the paid-for content in ways they see fit. Even if I lived in a bunker where no one else could possibly see the movie I paid for, therefor I'm not 'sharing it illegally', I would still not be allowed in a blue moon to copy that movie to DVD for TV viewing. Someone will tell you to get an AppleTV. How about Apple give us one for free? Until this changes, people wanting to use their content in multiple locations will continue to download music & movies via torrents, legally or illegally.
-
Hello. Having a problem with skype. i am online, all buttons work, however i can not make a video call the button simply doesnt work. Messages works. voice calls works. Please help.
Sounds like you need to contact skype.
-
I need to know how to fix my iphone4 I was playing one of my games and a up date poped up I pushed on the up date when it restarted all I have is a white screen with four black dots and all the driffent laughes and a i with a blue circle around it I can not make any calls or get any calls or any thing
I don't have apps on my phone so i can;t do anything
-
I have problem with concoction i can not make call or sms
I have problem with my i phone 5 i can not make call and sms do please help me
I think you don't understand the purpose of this forum. This is a user-to-user support forum. You're not talking to Apple. You're not talking to your cellular carrier.
One last time and then I'm done:
You need to call your cellular carrier and get this sorted out. No one here can help you.
Maybe you are looking for
-
Itunes wont launch with windows 7
I downloaded the new version of itunes and 2 days later updated my computer (Windows 7) and my itunes no longer worked. I uninstalled and re-installed and tryed many times. I came back to my computer earlyer and itunes was open and i accidently close
-
Hi All, I am trying to post a xml a simple XML file to JDBC... I have created a JDBC structure as ( my receiver is Oracle) OUTPUT_MT STATEMENT EMPLOYEE --- my table name action ( Value INSERT) TABLE (value EMPLOYEE my table name) access ID Name Age
-
Result Set is getting close in 12 Min
Hi, I am facing one issue here with the JDBC. I am doing a query to the oracle db , where I have more the 80K records in our one of table. Once I recieved the data in resultset. I am iterating them in batch of length 1024 from the result set. But I a
-
In Advanced Actions, what does the Pause action do? (V7)
I see in the help that a new action has been added to Advanced Actions in Captivate V7, but I can't find out how to use it. What does Pause do? Can I specify a pause time? Here's what i'm trying to do. I want to click a button to make a graphic appea
-
Command object locks table (TX)
Im having locking probmlems with ODP.NET. Im updating same table with many connections in many threads. I get table locks for hours (over 24 hours) and I cant find any timout to set. The CommandTimeout on the Command object is not implemented. In the