I can not make a wireless bridge in the band 2.4 Linksys wrt1900ac
I can not make a wireless bridge in the band 2.4 I make the same settings on band 5 and runs perfect
I'd check to see if the 1900AC can bridge two WiFi connections at the same time. It may only beable to bridge one or the other radio at a time. I know that with the 5Ghz radio is bridged on the 1900AC, the 2.4Ghz radio is running and working as a wireless AP.
Similar Messages
-
Can not connect my wireless printer to the new router.
Can not connect my wireless printer to the new router.
Can you please provide details:
1. The make and model of printer
2. Make and Model of Wireless Router
3. Is your printer connection wireless to router or a cable to PC
4. What have you done or attempted to do to establish a connection?
5. Any further info to assist -
I can not make a "Byte Code Adapter Installation"
When I open meets both paragraphs in step Managed System Configuration is somewhat obscure situations that do not allow the automatic configuration Introscope agent and Introscope Manager
Please help to resolve a number of questions that might help me complete the setup :
1. Why has the status of Enterprise Manager : <No Enterprise Manager configured> ( see picture)
I set up Enterprise Manager in accordance with the installation instructions and complied with all the setting items . Since without any configuration can be associated with the appearance of this status ?
2 . Why Server Node is empty detail settings ?
JDK Location:
Enterprise Manager Host:
Enterprise Manager Port:
Introscope Agent Name:
Introscope Agent Profile:
Autoprobe Directives:
Wily Version:
Introscope Agent Version:
Introscope Agent Log Location:
3 . What a mistake ($ MC: DIAG_WILY_MSG: 032 : L), which appears when I click configuration "Configure Introscope Agent Setup ...", and what it can be linked ? ( see picture )
And the last question , which is also linked to the process of automatic configuration and refers to a phrase from the instruction (Introscope Version 9
Installation Guide For SAP July 2012) points out "Automated Installation of the Introscope Agent via SMD"
there is such an item:
2 . Deploy ISAGENTJ5 *. SCA which is the Introscope Java Agent 9 with SDM to Solution Manager. You may need to deploy also ISAGENT *. SCA which is Introscope Java Agent 8.
However, nowhere does it say where exactly ( on what the absolute path ) I must perform unloading and then what to do with this dischargeThe problem was resolved a small manipulation - on stage Basic Configuration,
point 3 "Configure CA Introscope"
I forgot to add to the list of CA Introscope Enterprise Managers link to my manager.
Thus it is necessary to take into account that the path should be correct (usually for linux - /usr/sap/ccms/apmintroscope) and the directory should be applied appropriate privileges.
Then in paragraph "Byte Code Adapter Installation" - there are all the necessary data, and it starts to work correctly -
I just replaced our wireless modem with a new one; our airport extreme is now flashing amber light. When I get into airport utility it attempts to scan for the device but can not detect it. The utility screen is blank - nothing to select or configure. The menus are also blank. What do I need to do?
I just replaced our wireless modem with a new one; our airport extreme is now flashing amber light. When I get into airport utility it attempts to scan for the device but can not detect it. The utility screen is blank - nothing to select or configure. The menus are also blank. What do I need to do?
-
I've got a new iphone 5 and i dont know why im unable to complete purchase of Apps from itunes store,i keep getting error message saying contact itunes store support to complete this transaction...i would really appreciate if anyone would assist in any way
If you haven't already done so then you can contact iTunes support via this page and ask them why the message is appearing (these are user-to-user forums, we won't know) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
-
hello, im unable to make an icloud account on my iphone, because whenever i make an account, a messege appears that this device has enough accounts so you can not make a new one, so the problem is that i dont konw about the perevious accounts, what should i do to delete pervious accounts and create a new one?
The problem is that there is a limit for creating new iCloud accounts from a device and if the previous owner already created three accounts with this iPhone you bought from him, then you would have to use another device in order to create a new one.
-
I can't make my iphone 4 forget the hpsetup network which keeps showing up at work. My phone won't automatically connect to my company's wireless network. I have to reselect it everytime I come to work.
Settings/General/Reset - Reset network settings will "forget" all WiFi networks so you can select them again.
If the problem with your company network is not solved by doing this, are there multiple sites that have the same network name for the company network? Or is it the default network name for the router type (e.g., DLINK, LINKSYS, etc)? If so, this is what is causing the problem and there is no solution other than convincing IT that it is a bad idea to have duplicate network names. -
How can I make my wireless keyboard "discoverable" after replacing the batteries?
How can I make my wireless keyboard "discoverable" after replacing the batteries? Bluetooth keyboard setup said my "keyboard is not connected" when I turned it on today.....assuming the problem was batteries, I replaced them.
I've got it working now.....
-
I updated my iPhone device for thw 7.1.1 update that was avalibe on 4-23-2014. when I did this my phone is prompting me to connect to itunes on my computer. My computer is no longer working and I can not make or recieve calls on my phone.
Sounds like the device is in recovery mode. You will need to restore the phone. See this support document for instructions. http://support.apple.com/kb/HT1808
-
I have two seperate itunes accounts on two seperate devices and i can not make an itunes purchase on either one. When signing into the account it ask for the answer to security questions. I have NEVER answered a security question for these accounts. Each time it is a different set of questions. This has only happend since the original devices have been replaced/upgraded. How do I fix this? There is money in each account and both have recieved itunes giftcards for christmas that they are unable to use!
sailsalot wrote:
I have a new ipad and have used the community to answer questions for myself. Your help has been great! I don't know how you got my sailsalot name from my Skype account but I signed in with you as "gags76" and got help with my new ipad. I discovered I used a different Apple id and password on my ipad from my computer (imac) and changed that. My e-mail is Could you email me if there is something I should do at my end. I have to use itunes to sync with my ipad so I have been going back and forth between the two. Should I sign in with my proper Apple id on my ipad?
Yes -
All- I get this message ("iPhone can not make or receive calls. Restore from iTunes" (happend once while on airplain mode and now once while in wifi only area, out of cell range)). iPhone 4. Newest OS. Never happened with old OS! Cycling phone on/off does not help. Ignoring message causes phone to cycle off then on. After first time this happened, I restored. Six days later...same problem! Clearly a new fix is necessary. Suggestions?
I have not tried that...I will look up the process so that I can do it correctly (and still transfer all of my files, contacts, etc). Any suggestions? What is the advantage of restoring as a new device..is this more akin to a complete wipe of a hard drive?
-
I have one folder on an XSAN that one machine can not make changes to. Whenever I try to duplicate or copy a file in this folder I get 'The operation can’t be completed because an unexpected error occurred (error code -50).'
The permissions are fine, and I have trashed the finder plist and reset the NVRAM.
Anyone have a answer?
ThanksTips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
- make sure you have at least 10% of your harddisk in free space (I had only 5%).
- do a PRAM-reset (http://support.apple.com/kb/ht1379)
- perform a hardware test (http://support.apple.com/kb/HT1509)
- make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
- after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
So far I only cleared up some space on my HD, and already the problem occurs less.
Still, I will go through the other tips too.
(will post progress) -
when i burn videos to a dvd-r disc it works on my macbook but not on a windows/pc or my dvd player. How can i make it work on all the above and not just a mac product?
Unfortunately, the recording & movie industry does not respect the rights of the people who make them money, and thus you can only use the paid-for content in ways they see fit. Even if I lived in a bunker where no one else could possibly see the movie I paid for, therefor I'm not 'sharing it illegally', I would still not be allowed in a blue moon to copy that movie to DVD for TV viewing. Someone will tell you to get an AppleTV. How about Apple give us one for free? Until this changes, people wanting to use their content in multiple locations will continue to download music & movies via torrents, legally or illegally.
-
Can not print using wireless. It printed fine using ethernet
Running 10.6.8 on mac mini. Ethernet port has quit. (lighting strike I think, it fried two routers, did not get anything else)Nothing to go on here.
Do you have a wifi capable printer? If so, what model? What happens when you try to set it up? -
Hello my name is jose quant, and let me know how I can use CAMERA RAW adobe bridge because the bridge use and want to open a camera raw image, I get a message that says: MAIN BRIDGE aplicaion NOT ACTIVATED. BRIDGE REQUIRES A PARTICULAR PRODUCT HAS BEGUN AT LEAST ONCE TO ACTIVATE THIS FEATURE. I wonder what that means?
I use a lapto (windows 7) 64-Bit operating system.
Thank you,
my email is: [email protected], if you send me the answer to my queryYou need to activate Photoshop.
Mylenium
Maybe you are looking for
-
I want to be able to take all the email addresses someone else has used to distribute an email and create the same distribution list for myself for future use. I don't want to add all those people to anywhere in my contacts list. I just want them t
-
Problem to check out object in siebel 8.1, using Windows Vista
Hi people, i'm quite new to siebel and recently, i am supposed to start developing applets and BCs. The problem is, i cant check out object from the server. whenever i hit the button Check Out, the system (Siebel 8.1) is hang and stop responding. Can
-
Using the Alphabets & + in keypad
When I make a international call on a BB or other phone, I end up typing "+ <countrycode> <number>" How to use the "+" on the iPhone keypad? Can the alphabets be used to dial using the name of the contact? Smart phones have the feature to select use
-
My ipad won't shut down properly
My ipad will not sleep nor shut down properly. When I plug it in it freezes. Any solutions to this?
-
ISA570-Load balancing and Losing packets
I am load balancing two isp's. One isp is fine, but the other I have very high packet loss when pinging the corresponding wan interface from any machine located outside our network. During the packet loss, I cannot https to our firewall from outsid