I can not make IP SLA to signal SNMP traps upon timeout
Hello team.
I want SNMP traps to be sent every time an IP SLA (ICMP) object times out. For that purpose, I carried out the following
ip sla monitor logging traps
ip sla monitor 1
type echo protocol ipIcmpEcho 10.1.1.254
timeout 1000
frequency 15
ip sla monitor schedule 1 life forever start-time now
snmp-server enable traps rtr
snmp-server host 10.1.1.10 mycommunity
But no SNMP trap is sent when the IP SLA object times out. ¿ Am I missing something?
Any help will be greatly appreciated.
Rogelio Alvez
Argentina
SNMP traps for IP SLAs are handled through the system logging (syslog) process. This means that system logging messages for IP SLAs violations are generated when the specified conditions are met, then sent as SNMP traps using the CISCO-SYSLOG-MIB. The ip sla monitor logging traps command is used to enable the generation of these IP SLAs specific traps. The generation of IP SLAs specific logging messages is dependant on the configuration of the standard set of logging commands (for example, logging on). IP SLAs logging messages are generated at the "informational" system logging severity level.
The command ip sla monitor logging traps is sometime hidden and may not show with ?, so just copy and paste in global config mode and have logging on and check if any traps are generated.
-Thanks
Vinod
**Encourage Contributors. RATE them**
Similar Messages
-
I can not make a call out from I phone 6 gives fast busy signal or says call can not be made at this time.
At this time there are outages on the AT&T network. The network team is working to get this resolved as soon as possible.
-
I can not make or recieve calls or texts
I have had an EE contract for almost a year now, I can use Imessage and FaceTime but I can not make calls or texts and I can not recieve them. I have called EE and they haven't helped, I have signal and 3G but the 3G barely works. Does anyone know what I can do?
Hi ,
Thanks for coming to the community with this.
Does this happen in all areas?
Also have you tried the SIM in another phone at all?
I will certainly see what I can do for you . -
I updated my iPhone device for thw 7.1.1 update that was avalibe on 4-23-2014. when I did this my phone is prompting me to connect to itunes on my computer. My computer is no longer working and I can not make or recieve calls on my phone.
Sounds like the device is in recovery mode. You will need to restore the phone. See this support document for instructions. http://support.apple.com/kb/HT1808
-
I have two seperate itunes accounts on two seperate devices and i can not make an itunes purchase on either one. When signing into the account it ask for the answer to security questions. I have NEVER answered a security question for these accounts. Each time it is a different set of questions. This has only happend since the original devices have been replaced/upgraded. How do I fix this? There is money in each account and both have recieved itunes giftcards for christmas that they are unable to use!
sailsalot wrote:
I have a new ipad and have used the community to answer questions for myself. Your help has been great! I don't know how you got my sailsalot name from my Skype account but I signed in with you as "gags76" and got help with my new ipad. I discovered I used a different Apple id and password on my ipad from my computer (imac) and changed that. My e-mail is Could you email me if there is something I should do at my end. I have to use itunes to sync with my ipad so I have been going back and forth between the two. Should I sign in with my proper Apple id on my ipad?
Yes -
All- I get this message ("iPhone can not make or receive calls. Restore from iTunes" (happend once while on airplain mode and now once while in wifi only area, out of cell range)). iPhone 4. Newest OS. Never happened with old OS! Cycling phone on/off does not help. Ignoring message causes phone to cycle off then on. After first time this happened, I restored. Six days later...same problem! Clearly a new fix is necessary. Suggestions?
I have not tried that...I will look up the process so that I can do it correctly (and still transfer all of my files, contacts, etc). Any suggestions? What is the advantage of restoring as a new device..is this more akin to a complete wipe of a hard drive?
-
I have one folder on an XSAN that one machine can not make changes to. Whenever I try to duplicate or copy a file in this folder I get 'The operation can’t be completed because an unexpected error occurred (error code -50).'
The permissions are fine, and I have trashed the finder plist and reset the NVRAM.
Anyone have a answer?
ThanksTips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
- make sure you have at least 10% of your harddisk in free space (I had only 5%).
- do a PRAM-reset (http://support.apple.com/kb/ht1379)
- perform a hardware test (http://support.apple.com/kb/HT1509)
- make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
- after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
So far I only cleared up some space on my HD, and already the problem occurs less.
Still, I will go through the other tips too.
(will post progress) -
I can not make a "Byte Code Adapter Installation"
When I open meets both paragraphs in step Managed System Configuration is somewhat obscure situations that do not allow the automatic configuration Introscope agent and Introscope Manager
Please help to resolve a number of questions that might help me complete the setup :
1. Why has the status of Enterprise Manager : <No Enterprise Manager configured> ( see picture)
I set up Enterprise Manager in accordance with the installation instructions and complied with all the setting items . Since without any configuration can be associated with the appearance of this status ?
2 . Why Server Node is empty detail settings ?
JDK Location:
Enterprise Manager Host:
Enterprise Manager Port:
Introscope Agent Name:
Introscope Agent Profile:
Autoprobe Directives:
Wily Version:
Introscope Agent Version:
Introscope Agent Log Location:
3 . What a mistake ($ MC: DIAG_WILY_MSG: 032 : L), which appears when I click configuration "Configure Introscope Agent Setup ...", and what it can be linked ? ( see picture )
And the last question , which is also linked to the process of automatic configuration and refers to a phrase from the instruction (Introscope Version 9
Installation Guide For SAP July 2012) points out "Automated Installation of the Introscope Agent via SMD"
there is such an item:
2 . Deploy ISAGENTJ5 *. SCA which is the Introscope Java Agent 9 with SDM to Solution Manager. You may need to deploy also ISAGENT *. SCA which is Introscope Java Agent 8.
However, nowhere does it say where exactly ( on what the absolute path ) I must perform unloading and then what to do with this dischargeThe problem was resolved a small manipulation - on stage Basic Configuration,
point 3 "Configure CA Introscope"
I forgot to add to the list of CA Introscope Enterprise Managers link to my manager.
Thus it is necessary to take into account that the path should be correct (usually for linux - /usr/sap/ccms/apmintroscope) and the directory should be applied appropriate privileges.
Then in paragraph "Byte Code Adapter Installation" - there are all the necessary data, and it starts to work correctly -
Hello. Having a problem with skype. i am online, all buttons work, however i can not make a video call the button simply doesnt work. Messages works. voice calls works. Please help.
Sounds like you need to contact skype.
-
I need to know how to fix my iphone4 I was playing one of my games and a up date poped up I pushed on the up date when it restarted all I have is a white screen with four black dots and all the driffent laughes and a i with a blue circle around it I can not make any calls or get any calls or any thing
I don't have apps on my phone so i can;t do anything
-
I have problem with concoction i can not make call or sms
I have problem with my i phone 5 i can not make call and sms do please help me
I think you don't understand the purpose of this forum. This is a user-to-user support forum. You're not talking to Apple. You're not talking to your cellular carrier.
One last time and then I'm done:
You need to call your cellular carrier and get this sorted out. No one here can help you. -
Can not make a picture but no white line in pdf
Can not make a picture but no white line in pdf
There are many threads on same topic, please follow the suggestion mentioned here :
https://forums.adobe.com/message/6486790#6486790
Thanks,
Sanjit -
Hi people!
is mandatory to have a credit card to my account? and if I do not have a credit card I can not make a Itunes Account?Hi,
In addition to Roger's post, you will need a credit or debit card at a future date if you want to buy from Istore.
You can use itunes gift cards that have been purchased from external sources. Card needed if to want to buy gift card from Istore.
Jim -
Need to add condition to a template and can not make it work.
I am trying to add a condition to a template and can not make it work. Mainly because I am new at this. I have a field that needs to have a condition set. The field is LTD. The maximum value is $233.00. If the amount is less the 233, that value is used. If it is over 233 then 233 is used. So, if LTD is greater then 233.00 then 233.00 else LTD.
Can anyone help me write this for a Word BI Publisher Template. I need this report now but can't go to class until later this year.
Thanks,
RickReplace LTD with the correct element name.
<?choose:?>
<?when: LTD > 233 ?>233<?end when?>
<?otherwise:?><?LTD?><?end otherwise?>
<?end choose?> -
My device icon in the left column does not appear. so, I can not make the sync.
my device icon in the left column does not appear.
so, I can not make the syncDevice Not Recognised
For PC > http://support.apple.com/kb/TS1538
For Mac > http://support.apple.com/kb/ts1591
Maybe you are looking for
-
Last year I created a small website with Dreamweaver CS3. I had to update it - Using CS5 and now my links do not work. Mainly, I was changing the dropdown menu under the Levies and Bonds Explained tab. Can anyone take a look at my template code and
-
PI : Idoc to JDBC scenario : repeating segments mapping issue
Experts Please help. Question reg. mapping for ECC idoc to JDBC scenario. I am using the ORDRSP idoc which has multiple segments as below. IDOC -> multiple E1EDK14 segments with 2 fields (QUALF and ORGID) Depending on the value of the QUALF field i n
-
Showing data 6 months greater than date parameter??
I have a request to build a set of worksheets that accept an intial parameter - Start Date in the format MMM YYYY. When a user enters JAN 2009 - I want the worksheet to show data from Jan, Feb, Mar, Apr, May and June (2009). Can anyone point me in th
-
Unbalanced Body Tag on a line that doesn't exist
I'm receiving an unbalanced body tag error on line 129 and line 194, however these two lines don't exist in the template ALSO, whenever I create new pages from the template it automatically tries to save the new pages as .dwt and places them in the t
-
I haven't had any problems with my iPhone until I traveled to Canada this weekend. Twice while up there the time warped ahead by 1 hour. I looked like a total dork lined up waiting impatiently for the doors at the theatre to open an hour yearly. The