I can not mount my sd card anymore!!

I don't know what happened !
I just have been to New York for traveling with my wife, and after a day shooting, I want to store my pics into my MacBook Pro retina, but when I put my sd card into the slot, it doesn't show out as usual!
It drives me crazy, I don't want to lose my day with New York !
Anybody can help with this?
I do see the card in the disk utility, but it grey. When I want to mount it, it just say failed with mount!
Thank you anybody for advanced!

I'm seeing something very similar. Same Mac, same OS. I just bought a new 64GB PNY SD card on which to store my drop box. If it's in the SD card slot when I boot the machine, it works fine. If I insert it while the machine is running, it is not recognized.

Similar Messages

Can't mount (CoreStorage) encrypted volume anymore

Hi,
I use the following setup:
SSD: System
Internal HDD: Data (Documents, Music, etc.)
Both disks are encrypted via the Core Storage utility.
It seems I can't mount the "Data" disk anymore.
I wanted to download a random pdf which failed. ("Downloads Folder" is on "Data" Volume) Restarted the machine and now all aliased folders which refer to the "Data" volume have a question mark overlay rendered on their icon.
It's not possible to mount/unlock the "Data" disk through disk utility a. The "Data" volume is, according to DiskUtility quite full (only 16MB left). I have the suspicion that this small amount of space left in combination with the encryption causes some trouble.
What to do?
+-- Logical Volume Group 5898542B-F53F-46A6-B529-C31152081292
=========================================================
Name: Data
Status: Online
Size: 499763888128 B (499.8 GB)
Free Space: 16777216 B (16.8 MB)
|
+-< Physical Volume C6AAFA40-7F30-40C3-BC1E-A71A3C3DA757
| ----------------------------------------------------
| Index: 0
| Disk: disk2s2
| Status: Online
| Size: 499763888128 B (499.8 GB)
|
+-> Logical Volume Family 77CFA80C-6CEA-4FA5-8855-567C90FD2513
Encryption Status: Unlocked
Encryption Type: AES-XTS
Conversion Status: Complete
Conversion Direction: -none-
Has Encrypted Extents: Yes
Fully Secure: Yes
Passphrase Required: Yes
|
+-> Logical Volume E2DB4126-C04C-4AE1-B1AC-CDFF0218D537
Disk: disk3
Status: Online
Size (Total): 499428339712 B (499.4 GB)
Conversion Progress: -none-
Revertible: Yes (unlock and decryption required)
LV Name: Data
Volume Name: Data
Content Hint: Apple_HFS

Your unsupported hardware configuration may be causing the problem. The optical bay wasn't designed to take either an SSD or an HD.

DVD-Audio and "can not detect sound blaster card" with Audigy2 Va

I recently purchased an "Audigy2 Value" card from an eBay user, because I recently purchased some DVD-Audio discs. I downloaded the Audigy2 drivers from the website, and the Creative MediaSource player. 5. Surround sound worked fine for me, though sometimes the driver would reset to the default 2/2. sound and I would have to re-select 5. sound, which was annoying.
Then I was completely unable to get the MediaSource player to recognise my DVD-Audio discs, and the EAX functionality of the player would never work. The EAX logo never appeared in the player. When I tried installing the MediaSource player from an install disc, I got the message "can not detect sound blaster card". Then I discovered the world of EEPROM problems.
I followed advice from some other threads, including using ScanPCI to get information on the card, which yielded the following result.
When installed on my machine (Asus A7A266 motherboard) the ScanPCI reads:
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0005h (I/O Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h Unknown
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 0000A800h
System IRQ 5, INT# A
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
On another machine (specs unknown, it's a "house pc") I got this (with 3 entries!):
Vendor 02h Creative Labs
Device 0002h EMU0K Audio Chipset (SB Li've!)
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 04h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 002002h CT4850 SBLi've! Value
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00009000h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 7002h PCI Gameport Joystick
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 0h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Input, type Other
Subsystem ID 002002h PCI Gameport Joystick
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008800h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h PCI Gameport Joystick (Guess Only!)
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008400h
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
(Just a note: above you can clearly see that it does not say I have an Audigy, it thinks it is a SBLi've. Is this normal? The card IS an Audigy 2, it says so on the card.)
So, I put the card back on my own PC, thinking this has fixed my EEPROM, but I get the same as before. Subsystem ID 0002h. And of course the install software will not detect the card.
I realise that I could go back to using the web drivers, but this still leaves me with MediaSource not recognising the card and not enabling DVD-Audio or EAX, which is why I bought the card in the first place!
I have heard that the VIA chipset is possibly to blame for the EEPROM problems on the Audigy cards, and certainly it seems like it is not permanent, since it gave different information on the other PC. So now I am seriously considering getting a new motherboard.
Do other motherboards cause this same problem? I don't want to buy another board and get the same trouble. All I want is to be able to install my MediaSource and have it recognise my card so I can listen to my DVD-Audio discs.
Cheers,
Russ.

Figured out my problem. Installing the drivers from the web to begin with was a bad idea. They just did not work properly with the card.
The "card not found" problem has gone as well, after installing it in another PC. I am also using the proper install disc now, as the other one I was using turned out to not be for the Audigy 2 value after all, but was an Audigy 2 install disc. That easily explains the "Card not found" error. The differing results from the ScanPCI program are still bizarre, though.
Thanks to all of the people on the forum who posted information in other threads to help me deal with this issue. For now I am sticking with the original drivers from the disc and I am not upgrading.

Can not access the media card files Blackberry 8310 - HELP

Can not access the media card files Blackberry 8310.
I had a battery drain problem. The unit would only last 16 hours before completely drained. Purchased a new battery with the same result. I figured that I should try a complete reset so I did a hard wipe. Once that was done and I loaded the unit back up and returned online, the battery drain problem was resolved but now I can not access the media card.
Here are the messages:
“A media card has been inserted that contains encrypted content which will be unaccessible by this device”
I can see the files. I have transferred them to my PC via the SD card but I can not open them. Here are the settings:
Media card support – ON
Encryption Mode: - Security Password & Device
Encrypt Media Files – YES
Mass Storage Mode Support – OFF
Please note – I can not change the encryption mode since it is set by policy
Security Options – General Settings – Content Protection – Disabled
The version of Desktop Manage I am using is 4.2.1.8. When I try to use the Media Manager to move the files, I get an error message and can’t move the file. If I access the file on the card and try to display it, I get:
Unable to display file /media card/ pictures/ing000000xx.jpg.rem
Here is what I have tried (from the advice on this board):
1)     Read the files directly off the media card – No good
2)     Create a “new” folder on the media card and move a file into it then try to read it – No good
3)     Email the file then read it – No good
4)     Reset Encryption mode to off then try – Can’t do it – IT Policy setting
5)     Be sure that the password was set the same as before the wipe (setting is password & device) – Can’t do it – The Blackberry prevents me from using an old password.
So I think I can’t read the files because I can’t replicate the encryption key. Could that be right? My problem is that I do not understand why this would be the case. It is still the same device and since it knows what the old password was (because it would prevent me from using it again), why would it not generate a key to access the files?
All I am trying to get off the card are pictures on my 6 year old … some are priceless. Can someone help me do this? One would think that this should not be this hard but from all the postings I have found, it seems that it is. And yes, shame on me for not moving the files before I did the reset (THAT will never happen again!) but this being unrecoverable is unconscionable given how many seem to find themselves in this situation.
Thanks for any help you can offer!

Not sure why you couldn't see them using mass storage mode. Did you have the pics stored on your media card? Try going to media-menu-explore-media card-blackberry-pictures See what the extension is on your pics. If any have the extension such as .jpg.rem they are encrypted.
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

Database can not mount in exchange server 2013 due to Unable to mount database. (hr=0x80004005, ec=-543)

Hello All,
Database can not mount. In this Database domain Administrator mailbox have.
Please suggest. It's very important
The error:
[PS] C:\Windows\system32>Mount-Database -Identity MBX-01 -Force
Confirm
At least one committed transaction log file is missing. Mounting this database will result in data loss. If you can
locate the missing log files, don't continue. Are you sure you want to continue?
[Y] Yes [A] Yes to All [N] No [L] No to All [?] Help (default is "Y"): a
Failed to mount database "MBX-01". Error: An Active Manager operation failed. Error: The database action failed.
Error: Operation failed with message: MapiExceptionJetErrorRequiredLogFilesMissing: Unable to mount database.
(hr=0x80004005, ec=-543)
Diagnostic context:
    Lid: 65256
    Lid: 10722   StoreEc: 0xFFFFFDE1
    Lid: 1494    ---- Remote Context Beg ----
    Lid: 45120   dwParam: 0x51FF5F0
    Lid: 57728   dwParam: 0x51FF68C
    Lid: 46144   dwParam: 0x51FF709
    Lid: 34880   dwParam: 0x51FF709
    Lid: 34760   StoreEc: 0xFFFFFDE1
    Lid: 41344   Guid: 1c2c8cab-ae3f-40c8-8024-ffc776b22360
    Lid: 35200   dwParam: 0x2EFC
    Lid: 46144   dwParam: 0x51FFA55
    Lid: 34880   dwParam: 0x51FFA55
    Lid: 56264   StoreEc: 0x1388
    Lid: 46280   StoreEc: 0xFFFFFDE1
    Lid: 1750    ---- Remote Context End ----
    Lid: 1047    StoreEc: 0xFFFFFDE1 [Database: MBX-01, Server: EG-EXCHG-01.ABC.com]
    + CategoryInfo          : InvalidOperation: (MBX-01:ADObjectId) [Mount-Database], InvalidOperationException
    + FullyQualifiedErrorId : [Server=EG-EXCHG-01,RequestId=ca57e784-43c7-4357-9ab6-08881c87bb77,TimeStamp=9/18/2014 5
   :31:08 AM] [FailureCategory=Cmdlet-InvalidOperationException] 51350054,Microsoft.Exchange.Management.SystemConfigu
rationTasks.MountDatabase
    + PSComputerName        : eg-exchg-01.ABC.com

Hi,
This issue indicate corrupted database or corrupted logs. I suggest you to check and repair the database or check and repair the database log.
1. Check the state of database by following command: eseutil /mh "Path of the database"
Ps: Default path of the database is “C:\Program Files\Microsoft\Exchange Server\V15\Mailbox\Mailbox Database\Mailbox Database.edb”
Default path of the log files is “C:\Program Files\Microsoft\Exchange Server\V15\Mailbox\Mailbox Database\E00”
2. If the state is in clean shutdown, move all the log files from the Transaction logs folder location and then mount the database.
3. If the state is in dirty shutdown, check if the log files that is indicated as Logs required is available or not.
4. You can run Eseutil ml “Path of the log file\e00” to make sure that the log files is required is in a Clean state. This command will help you check the health of all the log files in the location.
5. If the log files are healthy, then try Soft recovery with the command Eseutil /r e00 /l ”Path of log files” /p “Path of the database”
Note:
Make sure you make a backup of the database before attempting any kind of repairs
6. Once the command completes successfully, then mount the database.
7. In case the required log files are not available in a clean state or missing, either restore from a successful back up or perform Hard repair with defragment.
Refer to this file about hard repair:
http://gallery.technet.microsoft.com/Step-by-Step-Exchange-2013-f8bed401
Hope this will be helpful for you

Vista can not detect my graphic card ATI HD2600 on Satellite A210-128

Hallo,
Can someone help me with this issue?
I have a Toshiba Satellite A210-128 laptop with vista separately on DVD, but it seems that the dvd is damaged and I can not use it any more.
I have installed on my laptop a brand new Vista from the original DVD that Im using it on my desktop, but the problem is that vista can not detect my graphic card hd2600.
So Im stuck...... I tried to install the ati driver from the Toshiba update site but I get a error because ccc can not detect a graphic card ?????/
What to do????
It is something special with the DVD that i have from Toshiba ?????
Thank you very much.

Hi
> I have installed on my laptop a brand new Vista from the original DVD that Im using it on my desktop, but the problem is that vista can not detect my graphic card hd2600.
So Im stuck...... I tried to install the ati driver from the Toshiba update site but I get a error because ccc can not detect a graphic card ?????/
The whole issue is really mysterious. In my opinion there are two options;
Either your have used and tried to install a wrong graphic driver or there is something wrong with your GPU chip.
Are you 100% that you tired an right graphic driver from the Toshiba European driver page?
If yes, then I recommend contacting the ASP in your country because this could be really an hardware issue.
Furthermore I found you second posting in other thread
http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=142621#142621
and I think more and more that this must be an graphic card issue.

Just bought a mac air with OS X v.10.7 Lion, for work I need to read and write NTFS drives, I install MacFuse and NTFS-3G, but it can not mount (recognize?) External HDD, in my MBP with Snow Lepard it work just perfectly... help please.

Just bought a mac air with OS X v.10.7 Lion, for work I need to read and write NTFS drives, I install MacFuse and NTFS-3G, but it can not mount (recognize?) External HDD, in my MBP with Snow lepard it work just perfectly... help please.

Reinstall MacFuse with the one from http://www.tuxera.com/mac/macfuse-core-10.5-2.1.9.dmg. If that doesn't work, you can use Paragon NTFS for Mac 9.0 which has been designed to work with Lion.

Just bought a mac air with OS X v.10.7 Lion, for work I need to read and write NTFS drives, I install MacFuse and NTFS-3G, but it can not mount (recognize?) External HDD, in my MBP with Lion it work just perfectly... help please.

Just bought a mac air with OS X v.10.7 Lion, for work I need to read and write NTFS drives, I install MacFuse and NTFS-3G, but it can not mount (recognize?) External HDD, in my MBP with Lion it work just perfectly... help please.

Sorry in my MBP Snow lepard it work.. don't have Lion In MBP

I can not create an Installer, After install the Vision Builder Demo and then uninstall it. I can not create a Labview installer anymore, it asks me for a Vision Builder Installer, even if My Labview program does not have nothing to do with it...

I can not create an Installer on LabView, After install the Vision Builder Demo and then uninstall it. I can not create a Labview installer anymore, it asks me for a Vision Builder Installer, even if My Labview program does not have nothing to do with it...
Solved!
Go to Solution.

Hi Shada this can happen if you are including additional installers to your installer for example DAQmx. When you are doing this the installer has to include other files like MAX (Measuremente and Automation Explorer). Probably when you installed Vision Builder it updated MAX, so when your installer is trying to Include MAX, its asking for the source where it was installed in your computer in this case Vision Builder.
Here you can cache the information so its not asked again, or you can download a newer version fo DAQmx, so it will update MAX and change de dependecy.
You can find more details about this issue in this KB:
KnowledgeBase 3S88PJMY: Why Do I Get A "Missing Distribution" Error When Trying to Build an Installe...
And for keeping a copy here is more info:
How Do I Stop the Missing Distribution Notification Each Time I Build An Installer?
Best Regards
Benjamin C
Senior Systems Engineer // CLA // CLED // CTD

Hello I would like to ask I have a problem with the Iphone 3gs 32 g I don install the ios 6.0 and now I can not activate the sim card .... I do not even know what's centenary advise me thank you

Hello
I would like to ask I have a problem with the Iphone 3gs 32 g
I don install the ios 6.0 and now I can not activate the sim card .... I do not even know what's centenary advise me thank you

Did you already try the suggestions from this article?
Symptoms
In certain situations, iPhone may present one of the following symptoms:
"Invalid SIM" or "No SIM Card installed" alert appears intermittently.
Status bar displays "No Service", "No SIM" or "Searching" in a location with good network coverage.
Resolution
If you encounter any of the above symptoms on your iPhone, try these steps to attempt to resolve the issue:
Update your iPhone to the latest version of iOS.
Toggle Airplane mode On and Off.
Try turning iPhone off and then on again.
Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
Restore the iPhone.
copied from iPhone: Troubleshooting No Service or No SIM

"mount: only root can mount" or "Unprivileged user can not mount NTFS"

I'm trying to set up an NTFS partition to use as a common data partition between Arch and Windows. I have it added to fstab so that any user in the ntfsuser group can have access to it, but if it gets unmounted accidentally from the "eject" symbol in the nautilus gui, you have to sudo to mount it back up. Is there a way for it to be remounted automatically when you click on the partition again in Nautilus? I've searched all through the forums and looked through several articles on the wiki but haven't been able to come up with anything. The error I get says
mount: only root can mount /dev/sda4 on /home/adam/UserData
I've tried adding the users option to fstab, but that only manages to change the error to
Unprivileged user can not mount NTFS block devices using the external FUSE
library. Either mount the volume as root, or rebuild NTFS-3G with integrated
FUSE support and make it setuid root. Please see more information at
http://ntfs-3g.org/support.html#unprivileged
I've tried the suggestions at the link in the error, as well as tried the solutions given in [solved] Gnome : mounting NTFS partition as user and a few other posts, but still nothing. If possible, I'd prefer to stay away from the users option in fstab, since it adds a redundant link to the sidebar in nautilus with a different name.

@Mr.Elendig: It is mounted through fstab normally, but in nautilus there's an eject icon on the sidebar next to the name of the drive which I've accidentally clicked on a couple times if I'm just trying to open the drive real quick. Once its been unmounted like that it won't let me remount unless I use sudo. I'm just looking for something to make it a little more convenient than having to pop open a cli and type in a password.
I'll try the suid root when I get home tonight, otherwise I'll look into autofs.

After updating my mac from snow leopard to mountain lion, i can not connect to the internet anymore

After updating my mac book pro from snow leopard to mountain lion, i can not connect to the internet anymore ;(
Anyone know what is wrong with it??
Is something wrong with mountain lion or the wifi itself????
HELP PLEASE!!
I need to use the internet desperately but i cant...
Thank you so much xxx

Hi galleryskins,
The article below may be able to help you with this issue.
Click on the link below to see more details and screenshots.
I've quoted some helpful highlights for you:
OS X Mountain Lion: Zoom content on the screen
Zoom with a mouse or trackpad
To zoom in and out, hold down the modifier key you specified while you perform the scroll gesture.
For example, if you have a trackpad and used the default settings, zoom in by holding down the Control (^) key while you drag two fingers up on the trackpad. Zoom out by holding down the Control key while you drag two fingers down on the trackpad.
If you chose Picture-in-picture zooming, a window appears near the mouse cursor with the magnified image. If you chose Fullscreen zooming, the entire screen displays the magnified image.
I hope this information helps ....
Have a great day!
- Judy

I can not open iphoto and itune anymore

anyone knows why i can not open iphoto and itune anymore/

I have rerun the applications install dvd, but it has not corrected the fault. When I try to open iphoto's I have an error message that says You can’t open your current photo library using this version of iPhoto.
Peter,
the version you installed from the DVD is probably older than the version you used last with your library, so you need to update to the last version you used.
I have tried to update to the latest iphoto 11 but it wont download. Any answers please.
Where are you trying to download from? When you upgrade a version that is installed from the DVD, you need to update from the Software Update menu entry in the Apple-menu.
Also, iPhoto has to be called simply "iPhoto", not iPhoto '11 or something similar and to be installed in the Applications folder. Otherwise it will not be recognised by the updater.
Regards
Léonie

I can not activate a ITune card. I went to Redeem, introduce the code and doesn´t work. I´m realy desappointed.

I can not activate a ITune card. I went to Redeem, introduce the code and doesn´t work. I´m realy desappointed.

Hey there EGARAY,
It sounds like you cannot redeem your gift code to your iTunes account. The following article may help you get that redeemed, or point you in the right direction if you are unable to:
If you can't redeem your iTunes Gift Card or code
http://support.apple.com/kb/HT6021?viewlocale=en_US
Thank you for using Apple Support Communities.
Cheers,
Sterling

HT201412 iPad not responsive. Even hold both the restart and Home buttons for 20 seconds. Trying using iTune to restore it, then only the charging button is shown. iTunes can not even recognize the iPad anymore.

iPad not responsive. Even hold both the restart and Home buttons for 20 seconds.
Originally I can see the iPad symbol on the screen. Trying using iTune to restore it, then only the charging symbol is shown. iTunes can not even recognize the iPad anymore.

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

I can not mount my sd card anymore!!

Similar Messages

Maybe you are looking for