I can not open any applications

when i try to open any application i can not , i do not know why ? i don't want to restore my mac.
please help me...

click on launchpad - then go to utilities - then go to disk utility.
once you're in disk utility, highlight your hard drive, the one above superdrive and click on verify disk (far right).
after verify disk is done, proceed to verify disk permissions.  if there are errors, click on repair disk permissions.
when all completed, restart your macbook.

Similar Messages

  • I just downloaded a program, but now can not open any applications...? I can't open any files or any programs. How would I go about fixing this?

    hey, writing this from my phone. Please pardon how everything is typed.  Quick question. Just downloaded the pear square on program. But now I can not open any applications. I beloved the message that popped up was something along the lines of 'do not have permission to access" ...so... I don't know whether or not I downloaded a virus or not. I was also obviously wondering how I might go about fixing this? -Thank you for your timeo

    Pear square one program

  • Ran disk utility repair permissions....now I can not open any applications on my Mac mini

    my Mac mini (mid 2011. OS X 10.9.1). Was running very slow so I ran repair permissions...after re-booting my computer I can not open any apple applications.  I keep getting a pop up window that says " finder quit unexpectedly". When trying to open safari " safari quit unexpectedly".  I can open skype, google chrome.   The computer indicates that wifi is on and connected - however I can't seem to log into Skype or access any web pages.  What to do next?
    One more thing, I keep getting pop up windows asking for passwords for different items if or keychain...I have tried to put in my password, but that doesn't work. Not sure what password it is looking for but the window won't go away even when I hit cancel

    Boot into your recovery partition (restart, hold down ⌘R until you see the Apple logo), and use Disk Utility to repair your hard drive.  OS X: About OS X Recovery
    Then see if you can restart normally.

  • I updated my applications and now I can not open any of them.

    I updated the required updates due to being given no other option to go around the update and now I can not open any of the applications I installed prior, it just shows the words up to date italisized and grayed out giving me no options to oppen the applications now that I have updated my applications.

    What is your operating system?
    What applications are these?
    How are you trying to open them?  From your description it sounds like you are opening the Application Manager.

  • Protected mode message comes up and when I try to open files it says it encountered an error and to check online.. i can not open any files now

    Within the past week I have been getting messages when trying to open pdf files " that its in protected mode and can not open"
    I deleted adobe and reinstalled directly from Adobe.com and now I can not open any file with a message it has encountered an error
    and will check online for solution. Please assist as no files will open now
    This is details of error
    Problem Event Name:    APPCRASH
      Application Name:    AcroRd32.exe
      Application Version:    11.0.10.32
      Application Timestamp:    547e9779
      Fault Module Name:    StackHash_147f
      Fault Module Version:    0.0.0.0
      Fault Module Timestamp:    00000000
      Exception Code:    c000041d
      Exception Offset:    77a011f1
      OS Version:    6.1.7601.2.1.0.256.48
      Locale ID:    1033
      Additional Information 1:    147f
      Additional Information 2:    147ff66574b08dc93180d912e60eb897
      Additional Information 3:    c48b
      Additional Information 4:    c48be403c52ec6c06778481aaa8948d8
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt

    Can you open Adobe Reader by itself?  If so, try to disable Protected Mode [Edit | Preferenes | Security (Enhanced)].

  • My Creative Cloud subscription has expired, and I assigned the monthly payment, but I can not open any progam creative cloud, I need help how to solve this problem

    my Creative Cloud subscription has expired, and I assigned the monthly payment, but I can not open any progam creative cloud, I need help how to solve this problem

    Carlos-
    Start by signing out and back in to see if it will see the subscription: 
    How to sign in and sign out of creative cloud (activate/deactivate)
    If the apps are installed fine and close after launch see this link:
    CC applications close immediately after launch
    If the problem is something different, please let us know the error you see or what is happening on the screen so we can advise  you on a solution
    Pattie

  • Since up grading to Adobe Reader X when I try to open any program Adobe tries to open it, therefore I can not open any programs now on my computer. I need help very quickly.

    I can not open any programs now that I have upgraded to Reader X. It has made Adobe the default progam to open all programs.

    Hi Kate,
    Please refer to this KB doc. for the solution Application, file icons change to Acrobat/Reader icon
    Let me know if the issue persist.
    Regards,
    Aadesh

  • I've can't open any applications on my Mac ! I tried to delete some files from safari (history) and then none of the apps including iphoto, safari, mail, facetime. I don't know how to fix it, help ? any idea ?

    I've can't open any applications on my Mac ! I tried to delete some files from safari (history) and then none of the apps including iphoto, safari, mail, facetime. I don't know how to fix it, help ? any idea ?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • CAN'T  open any applications after mac os update 10.4.11

    CAN'T  open any applications after mac os update 10.4.11 help

    General advice on updating:
    It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
    So before you do anything else:
    If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
    Turn off sleep mode for both screen and hard disk.
    Disconnect all peripherals except your keyboard and mouse.
    1. Repair Permissions (in Disk Utility)
    2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
    At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
    3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
    The 10.4.11 Combo Updater for PPC Macs is here:  http://support.apple.com/kb/DL170
    And for Intel Macs here:  http://support.apple.com/kb/DL172
    If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
    Full details about the 10.4.11 update here:  http://support.apple.com/kb/TA24901?viewlocale=en_US
    More information on using Software Updater here:
    http://support.apple.com/kb/TA24901?viewlocale=en_US
    Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
    Now proceed as follows:
    4. Close all applications and turn off energy saving and screensaver.
    5. Unplug all peripherals except your keyboard and mouse.
    6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
    7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
    8. Once your Mac is awake, repair permissions again, and you should be good to go!
    If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
    9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
    N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
    Lastly, Apple's own article on the subject of Software Update may also be useful reading:
    http://docs.info.apple.com/article.html?artnum=106695
    [b]If you are updating Safari (or just have):[/b]
    Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up.  If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was [i]not[/i] a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
    Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
    [b][i]Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on.[/b][/i] Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
    Additional tips on software installation here:
    http://docs.info.apple.com/article.html?artnum=106692
    To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for  problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
    Again, the advice is to remove all Input Managers from the following directories:
    /Library/InputManagers
    ~/Library/InputManagers
    especially prior to system updates (they can always be added back one-by-one later).

  • Recently I can not open any app. in my Ipad except original ones. How can I fix this problem?

    Recently I can not open any app. in my Ipad except original ones. How can I fix this problem?

    You do NOT need to restore your iPad.
    I believe that the problem is that there is a disconnect with your iTunes account and your iPad. What you are experiencing is a somewhat common issue after you sync your iPad, update your device - it could be a number of reasons that are causing it. the recommended fix is to download another app in order to "reconnect" your ID and iTunes account to the iPad.
    You can read more about it here. You will need a WiFi internet connection in order to fix it - or you have to be able to sync with your own iTunes library.
    iOS: Troubleshooting applications purchased from the App Store
    But this is what it says in the article.
    3. Install another app from the App Store
    If none of your user-installed apps will launch, there could be an issue with Apple ID authorization. Download and install a free (or paid) app that isn't already installed on your device to reset this information. You could also remove an app from your iOS device and download it again from the App Store or sync the app from your computer.
    Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.

  • I can't open any application

    I tried formatting my sansa player while working on my macbook pro. Since I did that I can't open any application at all. I click on them but nothing happens. I can only use the finder. I tried the disk utility but no joy. Could you please help???

    Have you run "Repair Disk" from your install disks?
    Steps for using Disk Utility
    1. Insert the Mac OS X Tiger Install disc or Install Disk 1 that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair.
    If you repair errors run it until no errors found.
    -mj
    [email protected]

  • I can´t open any application of my ipod touch 4g.

    I can´t open any application of my ipod touch 4g. I have updated the software, download a new app, restart and reset the ipod but it´s still not working. Someone knows what can I do?

    Did you try restoring the iPod from a previous backup or to factory settings yet?  If not, those would be your next steps.
    iTunes: Backing up, updating, and restoring iOS software
    Otherwise, you have a hardware issue, meaning you'll want to set up an appointment at your local Apple Store/Genius Bar to have them take a look at it.
    B-rock

  • HT1430 i can not open any apps on my ipod touch.

    For some reason i can not open any apps on my ipod touch, it was working fine yesterday. I have tried turning it on and off and resetting it and connecting to itunes on pc but nothing i do seems to work, can any one please help.

    - Try purchasing/installing any new app.
    - The remaining items of:
    iOS: Troubleshooting applications purchased from the App Store
    - Restoring the iPod

  • Can not open any open any web pages. Receive the following error message (Error code: sec_error_library_failure)

    I can not open any websites using Mozilla browser. I have attached a screen shot of the error message that I receive. You will also find it below: .
    Secure Connection Failed
    An error occurred during a connection to www.google.com. security library failure. (Error code: sec_error_library_failure)
    The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
    Please contact the website owners to inform them of this problem.
    This error appears on all pages that I try to browse to. All other browsers work fine on my computer.

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
    '''If Firefox is open,''' you can restart in Firefox Safe Mode from the Help menu:
    * Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    '''If Firefox is not running,''' you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".
    ;[[Image:SafeMode-Fx35]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.

  • Can not open any web page in Safari

    can not open any web page in Safari on the IPad.  All other wireless features work fine.

    If this does not work then try a reset ,
    Reset your iPad by pressing the 'Sleep' and 'Home' button at the same time for about 15 seconds or so. Your iPad  will then go through a reset / reboot procedure and will be ready for use within about a minute.
    Don't worry about doing this as you will not lose data or settings.
    Good luck and do report back.

Maybe you are looking for