I can not open Calender. The server responded with an error. Access to account "virgin net" is not permitted. The server responded: "403" to operation CalDAVAAccountRefreshQueueableOperation.

I can not access Calender.
Keep getting blocked by message.
The server responded with error.
Access to account "virgin net" is not permitted.
The server responded:
"403"
to operation.
CalDAVAaccountRefreshQueueableOperation.

Please take each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Step 1
In the Internet Accounts preference pane, delete any calendar accounts you don't use.
If there's no improvement, delete all calendar accounts and add them back. With an iCloud account, all you have to do is uncheck and recheck the box marked Calendars & Reminders in the iCloud preference pane.
Step 2   
You may be trying to access an invited event that you declined, or one that was rescheduled after you accepted it. The error message should give you a clue as to what it is. If the calendar is on iCloud, you can bring up the Calendar on the website and select
          Show Declined Events
from the popup menu with the gear icon in the upper right corner of the page. The declined events will appear in gray, and one of them should match what's shown the error message. [Credit for this solution to ASC member Psi.]
Step 3
If you get the error when trying to accept an invitation in an email attachment, it's because the organizer didn't properly create the event.
Step 4
Follow the instructions in this support article. Modify as necessary for a calendar that's not on iCloud.

Similar Messages

  • HT4968 Calendar is locked on my Mac. I keep getting the message "The server responded with an error: Access to iCloud is not permitted. The server responded 403 to operation caldavmigrate to server queue able operation." How do I resolve?

    Calendar is locked on my MAC.
    I keep getting the message" The server responded with an error: Access to icloud is not permitted. The server responded 403 to oepration caldavmigrate to server queueable operation."
    How do I recify?

    We previously had a similar issue when migrating multiple accounts from MobileMe to iCloud.  The issue was resolved by disabling and then enabling iCal sync through iCloud on our iMacs in System Preferences.
    Always backup your calendar before troubleshooting (File > Export > iCal Archive).
    The following steps are roughly from a Apple Support Community discussion.
    Open iCloud in System Preferences.
    Switch off (uncheck) iCal sync in iCloud System Preferences pane.
    Backup iCal before doing this. You will need to remove calendar data.
    Open iCal and verify the iCloud account is removed in the iCal preferences under accounts.
    Close iCal, reopen System Preference and switch on (check) iCal sync in iCloud System Preferences pane.
    Reopen iCal and verify the iCloud account is enabled in the iCal preferences under accounts.
    At this point if the problem persists you might try completely signing out of iCloud and then signing back in. But remember to backup all related data (iCal, Contacts, Mail, Photostream, etc) before turning off iCloud sync!

  • Since last weekend (3-15-15) I have been unable to send/receive text messages with a friend who has Sprint service. The messages send with no errors on either side, but neither side is receiving the messages. Is anyone else having any similar issues?

    Since last weekend (3-15-15) I have been unable to send/receive text messages with a friend who has Sprint service. The messages send with no errors on either side, but neither side is receiving the messages. It seems to be only this one person affected by this issue, everyone else that I've tried sending messages to has responded with no trouble. Is anyone else having any similar issues?

    Retrohacker, Your text messages are too important to be missed! Let's figure this out, together. Are you able to successfully make and receive calls from your friend? Which phone do you have with us? Any new messaging applications or changes that you can recall on the phone since this issue began? Please share details so we can get to the bottom of this for you.  TanishaS1_VZW Follow us on Twitter @VZWSupport  If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • MY calendar screen on my MacBook Pro is locked up will not let me close. "The server responded with an error" I have tried force quit, and shutting of the computer.

    My MacBook Pro 15in mid 2010 4gb 1067, 2.4gighertz i5, os 10.9.5 has locked up the calendar screen displays "The server responded with an error" and will not let me exit the msg or the screen I can use the rest of the computer.  I have turned of the computer, force quit and other things.  I tried to send a Calendar by email

    I tried your suggestion but it did not work (hold shift down when re-launching calendar). Here is the message I keep getting. Help - this endless loop prohibits me from accessing any calendar functions.
    The server responded with error.
    Access to account “Google” is not permitted.
    The server responded:
    “403”
    to operation CalDAVAccountRefreshQueueableOperation.

  • Mail responds with this error when I have attachments which are not that large.  How can I get around this. very aggravating. error reads Your message has size 32.1 MB, which exceeds 28.3 MB, the maximum allowed by the server.

    error message is-Your message has size 32.1 MB, which exceeds 28.3 MB, the maximum allowed by the server.  What can I do to get it to accept larger files. This was only 4 pages scanned.

    You can use the Preview app to reduce the fille size or send multiple emails.

  • Since updating yesterday iTunes will not open/sync/recongnize my iPhone. No error messages, ive tryed un/re-installing it but the same thing occurs.. Anyone! Please can you Help? Thank-you

    HELP!!  my iTunes will not respond to connection via usb, it does not reconize it or sync it, no purchased,  wont re-charge etc, when it used to work Yesterday
    and i did an update... ive tryed un/re-install and its the same problem... how ever on my other computer its fine...... Please HELP !! Thank-you

    Hey!
      Glad to hear that you and your family made it through relatively unscathed!  I think we all need to take better care of our wonderful planet, because I think we are upsetting Mother Nature! 
      I have the Windows Installer Clean-Up screen up and tried to upload a screen cap for you, but IE immediately shuts down every time I try.  So I'll have to transcribe the screen for you:
      I see the following:
    (All Users)
    (All Users) [1.2.0.10]
      Those are the top two lines.  The following lines after that are programs he has installed on the machine like Acrobat, Adobe, Autodesk Inventor, and such and they all have a name and program number in brackets.
      And I now again have the obligatory Apple programs installed and listed again:
    (All Users) Apple Application Support [1.5.1]
    (All Users) Apple Mobile Device Support [3.4.0.25]
    (All Users) Apple Software Update [2.1.2.120]
    (All Users) Bonjour [2.0.5.0]
      Please note that iTunes is NOT LISTED.
      Everything else 'appears' to be normal, I'd say.
    Take care, and I'll see you on the flipside!  According to my clock, it's 4:11am Thursday morning there!
    See ya!
    - Austin 

  • When I try to open firefox I get a message that it could not open because of a problem with chrome registration. After click close 3 or 4 times, the page that opens up is an "add-ons" , plug ins etc. How do I get rid of that?

    Top of page that opens says
    Add-ons
    Get Add-ons, Extensions, themes, plugins, installation
    Restart Firefox to complete your changes Restart firefox
    HP Smart Web Printing
    Norton IPS ...
    Norton Toolbar...
    So on
    Why is this happening and how do I solve this problem? I am just about ready to switch back to Explorer.

    Top of page that opens says
    Add-ons
    Get Add-ons, Extensions, themes, plugins, installation
    Restart Firefox to complete your changes Restart firefox
    HP Smart Web Printing
    Norton IPS ...
    Norton Toolbar...
    So on
    Why is this happening and how do I solve this problem? I am just about ready to switch back to Explorer.

  • TS3999 The server responded with an error

    I have tried to amend an entry in Calendar, but when closing the entry it reverts to the previous time (Im trying to keep trtack of my work rota and I did overtime) I get the message.
    The Server responded with an error
    Access to "M&S Felixstowe" in "CJ Work" in account "CJ's Email" is not permitted.
    The server responded:
    "403" to operation CalDAVWriteEntityQueeableOperation.
    Can anyone help.
    I can use it to enter but not amend!!!!

    I am tired of how Yahoo has gotten worse and worse. It is the ONLY account I get problems with DAILY (even after removing and re-adding). AOL will act up once in a while not taking a saved password but accepting it when OK is clicked.... But Yahoo is always responding with such errors.... Today's calendar error is:
    The request (CalDAVAccountRefreshQueueableOperation) for account “Yahoo” failed.

  • When opening the Calendar app, I am greeted with a box that says "This calendar can not be refreshed."  After clicking on "OK" another box pops up saying "The server responded with an error."  How can I get rid of these?

    When opening the Calendar app, I am greeted with a box that says "This calendar can not be refreshed," and after clicking ok there is another box saying "The server responded with an error."  How do I get rid of this.  The calendar functions all right, but just have to close both of those boxes after doing any action in the calendar app.

    Please take each of the following steps that you haven't already tried, until the problem is resolved. Back up all databefore making any changes.
    Step 1
    From the Calendar menu bar, select
    Calendar ▹ Preferences ▹ Accounts
    Choose the affected account from the list on the left and uncheck the box marked
    Enable this account
    Then check the box again. Test.
    Step 2
    Make a note of the account settings, then delete the account and add it back with the same settings.
    Step 3
    If you can't add the account, the settings may be invalid. Verify them. How you do that depends on what kind of account it is. If it's a Google calendar and you've activated 2-step verification, you need to generate an application-specific password in your Google account and enter it in place of your old password.
    Step 4
    Quit Calendar. Triple-click the line below on this page to select it:  
    ~/Library/Calendars/Calendar Cache  
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a file named "Calendar Cache" selected.
    Move the selected file to the Trash. There may be one or two other files in the same folder with names that begin in "Calendar Cache". If so, delete those files too.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • I received the error (in iCal on my iMac): "The server responded with an error". The error message is very large, and if there is a way to acknowledge and close it I can't find it. Because this error message is open, I can't do anything in iCal. Any sugge

    I received the error (in iCal on my iMac): "The server responded with an error". The error message is very large, and if there is a way to acknowledge and close it I can't find it. Because this error message is open, I can't do anything in iCal. Any suggestions on how I could kill this error message? Thanks.
    iMac, Mac OS X (10.7.2)
    Basically i tried to enter too much information into my calendar and it has crashed  now i can not get rid of the error message or use the calendar  can anyone help please

    did you find ou how to get rid of it i can't

  • I received the error (in iCal on my mac) : "The server responded with an error" while creating an event. I can't delete or acknowledge this error and now iCal is frozen. Any suggestions?

    I received the error (in iCal on my iMac): "The server responded with an error". The error message is very large, and if there is a way to acknowledge and close it I can't find it. Because this error message is open, I can't do anything in iCal. Any suggestions on how I could kill this error message? Thanks.

    did you find ou how to get rid of it i can't

  • The server responded with an error.  Access to "Don Weist/Winhall" in "Work" in account "iCloud" is not permitted.  The server responded: "403" to operation CalDAVWriteEntityQueueableOperation.

    "The server responded with an error.
    Access to “Don Weist/Winhall” in “Work” in account “iCloud” is not permitted.  The server responded: “403” to operation CalDAVWriteEntityQueueableOperation."
    Does anyone know how to repair this problem.  It just began happening today.
    Thanks,
    Ken

    We previously had a similar issue when migrating multiple accounts from MobileMe to iCloud.  The issue was resolved by disabling and then enabling iCal sync through iCloud on our iMacs in System Preferences.
    Always backup your calendar before troubleshooting (File > Export > iCal Archive).
    The following steps are roughly from a Apple Support Community discussion.
    Open iCloud in System Preferences.
    Switch off (uncheck) iCal sync in iCloud System Preferences pane.
    Backup iCal before doing this. You will need to remove calendar data.
    Open iCal and verify the iCloud account is removed in the iCal preferences under accounts.
    Close iCal, reopen System Preference and switch on (check) iCal sync in iCloud System Preferences pane.
    Reopen iCal and verify the iCloud account is enabled in the iCal preferences under accounts.
    At this point if the problem persists you might try completely signing out of iCloud and then signing back in. But remember to backup all related data (iCal, Contacts, Mail, Photostream, etc) before turning off iCloud sync!

  • The server responded with an error. (not MobileMe related)

    Hello,
    At work, some people are getting this message on their computer:
    *The server responded with an error.*
    There was an unexpected error with the request (domain CalDAVErrorDomain / error 5 / description 'The server has not specified a calendar home for the account at "/ -- http://192.168.[my edit:rest of address]".').
    Can anyone please help?

    AppleMan - you're a star! Thank you very much. Bit late in coming to the rescue - just like the Cavalry always was, allegedly - but nevertheless very welcome. It has sorted the problem out for me, and probably many others who, like me, did not know that there was an empty box waiting for the Password!
    Cheers and thanks. Case closed
    Chris

  • OMacbook calendar gets the message "the server responded with an error" and is now not syncing. Any idea?

    I haven't done anything to my Macbook (I don't think) but out of the blue when adding entries to my calendar,  I now get the message "the server responded with an error". Consequently it will not sync with the Cloud. I have an iMac which DOES sync with both iPad and the iPhone.
    Anyone any idea?
    ALan

    Sorry, no help there. Ical does not stay open long enough to do anything with. All it does is crash and apologise and say it will notify Apple.
    Guess I will just delete it altogether and use google calendar.

  • I can't open .pkg files.  i get an error telling me to choose an application to open them.  the Installer app is not in my Utilities folder or in System/Library/CoreServices.

    i can't open .pkg files.  i get an error telling me to choose an application to open them.  the Installer app is not in my Utilities folder or in System/Library/CoreServices.

    Install the UnArchiver and try again.
    http://wakaba.c3.cx/s/apps/unarchiver
    There is no Installer.app in the Utilities or Applications folder, there is one in the System/Library/CoreServices.
    If yours is not there, then you need to:
    1: Backup your data off the machine to a non-TimeMachine drive and disconnect all drives.
    2: If you have TM, try to restore the Installer.app from the TM drive and reboot. See if things work.
    If the above doesn't work, your going to have to re-install just OS X 10.6 (and bundled programs) from the disk by holding c and booting off the 10.6 disk and simply installing OS X. Then software updating to 10.6.8.
    This will replace all bundled programs and OS X, not touch your files (backup regardless) and most third party programs.
    Some third party programs will have to be reinstalled form original sources because they install Kext files into OS X and thus kicked out by the 10.6 reinstall form disk.
    All should go well, however if you boot to a gray screen or other freeze, reboot holding the shift key down, then update all your third party software to be current to 10.6.8.
    Another method is to re-install in to CoreServices the Installer.app from the 10.6 disk using the extraction program called Pacifist from CharleSoft, then running software update to get any updates for Installer.app.
    http://www.charlessoft.com/

Maybe you are looking for

  • Problem with customer exit variable that is input ready as well

    Hello all, I'm facing an issue with a customer exit variable that again has been defined as input ready. I'm not sure why it is working incorrectly and I#m wondering if this is a bug or if I do s.th. stupid. The problem is that in the exit program ZX

  • Can I upgrade Server 2012R2 Standard to 2012R2 Datacenter while in a failover cluster?

    I would like to know if it is supported to upgrade my Server 2012R2 Standard to 2012R2 Datacenter while in a failover cluster. I have a 3 node cluster all running Server 2012R2 standard with only a few VM's running on them at this time. -Jim

  • Error Disables All Other Events

    I am using a property node for my STOP button to trigger an event within an event.  Everything was working fine when I just threw it together; added error handling and cleaned stuff up it no longer worked.  The symptom was my event within the first e

  • Premier Pro CC 2014

    I have an Oct 2013 MPB, 2.6 i7, 16Gb RAM, running Yosemite 10.10, and my PP CC is currently up to date. The new features are very nice, I particularly like the masking features. They are great! However, I don't know what else to say other than it cra

  • Firefox hangs when opening in Vista but this is a new problem

    I am running Firefox 3.6 and Vista. My laptop is 18 months old and I have been using Firefox since day one. In the past week, Firefox has started to hang on opening. I takes as long as a minute to clear, and I don't have this problem with IE8 or AOL.