I can not open light room 3

Says another application has it open. i un install and reinstalled but it still will not open.. Do not know why. I'm using windows 7

You catalog is probably still locked-most likely from a bad shut down of your previous Lightroom session.
Search for a file with the same name as your catalog but a .LOCK extension. Delete this file. Lightroom should open normally.

Similar Messages

CAN NOT FIND LIGHT ROOM 5.7 BASIC EXPOSURE , CONTRAST,HIGHLIGHTS ETC ?

CAN NOT FIND ANY MORE IN LIGHT ROOM 5.7
DEVELOP
BASIC
EXPOSURE , CONTRAST,HIGHLIGHTS ETC ?

Yeah, they disappear when you type in ALL CAPS. Kidding aside.
Right-click on any panel header (ie. Tone Curve) and put a check next to Basic.

Can not install Light Room cc

Light Room does not install past 85%. I get the following error message:
ERROR: DW006: Apple Package failed to install successfully.
ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1

Hi vitreus,
I am sorry but Lightroom 5 is not compatible with Mac 10.6.8. Please refer to the Tech specs.
http://www.adobe.com/in/products/photoshop-lightroom/tech-specs.html
Regards,
Abhijit

My iphone 4s stopped working and the flash light is on. I can not open or close the phone. The only thing working is the light. What is going on?

My iphone 4s stopped working and the flash light is on. I can not open or close the phone. What is going on?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried?

Desk top pc windows 7 ultimate, after update of itunes can not open under my account shows up very light on task bar but opens fine under my wifes account on same computer

Windows 7 ultimate, after update can not open itunes under my account shows up very light on task bar, but opens fine under other accounts on same computer

Hi M0M1!
I have an article for you that seems to describe your issue and can provide some helpful troubleshooting steps for this issue:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Specifically, you will want to focus on this section of the article:
User-specific troubleshooting
If you experience the issue in one particular user account, the suggestions below may resolve the issue. Before proceeding, you'll need to make hidden files and folder visible in Windows using steps 1-5.
Remove iTunes Preference files. Some of the files that iTunes stores settings and preferences in may be unusable. iTunes saves its preferences in two folders. Move one of them to the desktop and test to see if the issue persists. If it does, move it back and remove the second folder. The locations for the preference folders are:
c:\Users\username\AppData\Local\Apple Computer\iTunes
c:\Users\username\AppData\Roaming\Apple Computer\iTunes
Create a new iTunes Library.
Hold the Shift key while opening iTunes. You'll be asked to choose an iTunes library.
Choose Create Library.
In the following window, select a location to save the new iTunes Library.
Click Save. iTunes will open the new library. After you close iTunes, you can always select the original library by holding the Shift key while opening iTunes.
Recreate your iTunes Library. If your iTunes library has become unusable, rebuilding it may resolve the issue.
Check for issues with content files. Sometimes an audio file can cause iTunes to quit unexpectedly or stop responding when it's analyzing gapless playback information. To determine which file may be causing the issue, follow the steps below:
Quit iTunes.
Navigate to the iTunes folder:
Windows Vista: c:\users\username\Music\iTunes
Windows 7 and Windows 8: c:\users\username\My Music\iTunes
Move the iTunes Library.itl file to your desktop.
Open iTunes. You shouldn't see any content in iTunes.
Choose File > Add Folder to Library.
Navigate to the folder where your music is located:
Windows Vista: c:\users\username\Music\iTunes\iTunes Media
Windows 7 and Windows 8: c:\users\username\My Music\iTunes\iTunes Media
Choose an artist, album, or song to add to the library.
Wait for iTunes to successfully add the item to your library and perform the gapless playback scan.
If successful, continue adding songs to your library.
If there is an issue with one of your files, you'll notice your issue reappear after you add it to the library. You should repeat these steps, being careful not to add the files that caused the issue.
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

Garage Band Problem: I can not open my existing files on Garage Band. They appear in a light gray. I can only open recent files. How do I open the existing files?

I would like help opening my existing files in Garage Band? I recorded 22 songs earlier this month which I want to edit, but I can not open these files.
The only files I can open are the more Recent files.
Please advise me what to do?
Thanks,
Bonnieta

It's not an apple solution but you can try MailRaider by 45 RPM software. I have not used it personally but it was one of the hits that came up when I did a google search for .msg on Mac.
Hopefuly the link posts but if not then just head over to macupdate and do a search for MailRaider
http://www.macupdate.com/app/mac/31845/mailraider
Hope this helps.

Can not open my web page?

Installed my new 2T unit 5 days ago, it was fine till this afternoon. I can not open web page or connect to internet. (wired or wirelessly)
No issue with my cable modem as i tested by pluging wire direct from the modem.
"Green" light in front is OK, i have to unplug power and plug power back in after 10 sec to restore the unit to function again.
I read about the new time capsule will loss connections over time, wonder if anyone has experienced this problem in the past?

Hi BigChinaD,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
Resetting an AirPort Base Station or AirPort Time Capsule FAQ
http://support.apple.com/kb/HT3728
Cheers,
- Judy

I can not open the history even of today and see

5/8/10
Dear ladies and gentlemen,
• I thank you all each and every person, ladies and gentleman who are connected with Mozilla Firefox in any manner and who have contributed for its development and any other who is in any way even concerned and every well wisher of Mozilla. My good wishes for all of them and for their work that it has become so popular and every one of them has laboured selflessly and without any money angle for that and that is the best thing. Such selfless work must be appreciated by each and all.
• My earlier suggestion for accepting cheques from those who like me do not have any cr. card has still not been accepted.
• You please incorporate features from other good programmes as these are still not there in FireFox and I am using only this since when I first installed it and I do not intend to use any other but these features as I remember were available few years back are still not there in Mozilla so today there should be many more features which can be incorporated in Firefox.
• When the connection is on but not opened i.e. the connection has been switched on but not opened i.e. the modem lights are on and not off then if I go back to a page opened then the Firefox shows loading problem but if I switch off the modem then I can access that very same page. This should be taken care of so that even if I switch on the modem but the connection is not on even then I should be able to see the page 1 or 2 or many pages backwards.
• Then I can not open the history even of today and see that page whereas earlier I could click any history page and it showed even if it was 5 days old (which is my setting) and I have not changed any setting.
• I also thank the all add-on creators because I have installed very few but even then these are very useful.
• I would also suggest that you incorporate these add-ons in the FireFox itself for example I suggested many moons back that let there be a system of any number of tabs being opened (and a few more suggestions) and it is available as add –on in tab mix plus which I have now installed.
• I also request to everyone concerned to give his ideas as to what other features can be incorporated in Firefox and these suggestions be on your website and after a certain number of well wishers and users select the idea you please either develop it yourselves or any well wisher can do it and then it can be incorporated in the Firefox.
• I also give you my suggestion which is not available presently to my knowledge in the browser or add-ons this is that if I move a window in tab mix plus then it is always in a window for each tab but instead of that my suggestion is that I should be able to move any no. of tabs or any other tab to one particular window only and that too in any manner I like in any sequence like at a particular No. of tab say 15th etc.
• I also feel presently having some problem that when I shut down the computer after save and quit pages that are there are not reopened. Loading problem in those pages appears I do not know the reason but Firefox should be able to show all the last page/pages/window/windows I was perusing after I saved and quit.
Thanking you,
Best wishes for all of you.
Yours sincerely,
DS

Hi,
Please provide more details about your computer along with the graphics card. Also, A log file might help identify the cause of the crash. Please right-click 'My Computer', select "Manage," look under 'Event Viewer->Windows Logs->Application' to see if there's an event there from Premiere Pro. If so, copy the contents of that log and paste them here.
Thanks,
Rameez

Can not open MS word docs

I have an emac running 10.2.8, two users, when i sign in and try to open a word document from the desktop a window opens and says i can not open the document because it's in use by another user. I created this document and the other user has not signed on in months. I then tried all of my word docs and the same message appears. I've shut down the computer, restarted putting in my password but same problem occurs. I repaired permissions but no change. These are my docs and no one else is "signed in" or using them. I cannot copy them or send them via email (which now unexpectedly quits upon opening), Do I need to archive and install?, How much free space on the hard drive do I need to reinstall the OS?
Thanks for any response.
Joe

Many system issues can happen as the hard disk drive's capacity is over-full
with saved content and there is no room left in the hard drive for the OS X
and applications to function. The drive should have more than 10% free of
content in order for the OS X and Applications expected to run in the Mac
to have room. This space is for swap files, virtual memory, and flex space
where the system has to automatically find and use free space for most
everything the computer can do.
{There are specific rules (seen online in helpful articles, some in Support)
on how to transfer iTunes music libraries or make and restore archives
to external hard disk drives and maybe save to DVD if possible; these
and iPhoto libraries eat up essential space on a hard disk drive.}
The drive is over-full and a failure (including damage to the physical drive)
is a matter of time. He should try to archive music on DVD off the Mac
& then free-up that space on the internal hard disk drive so the OS X
and apps can use the free space for their required functions. Moving a
few dozen original items, after saving them off the computer, to Trash
may be helpful, but that would take a lot of time & looking.
An externally enclosed drive, properly formatted for OS X and capable
of booting the computer (firewire 400) is advised; at this point.
My computers have about 50% empty hard disk drives; that free space
allows the OS X's automatic virtual memory allocation to create and use
that space to help the apps and system function properly. When it is not
there, the system tries to overwrite non-essential files or could cause a
kind of corruption to happen on the main hard disk drive...
The documents and other permission issues are a symptom of other stuff.
A computer in a good state of maintained health requires some effort;
and when that is not done routinely, things get slower and as the drive
gets full, stuff can fail. So, to free-up user created files such as music
(including hidden duplicates if they exist) so that space can be reclaimed
and used by the OS X, is a good idea.
To get and use an externally enclosed hard disk drive in a self-powered
unit with AC Adapter, probably a FireWire ported one so the transfer
rate is fast enough to get the job done (USB 1.1 is too slow to boot an
older computer, so FireWire can; a clone of the entire computer could
be created on a formatted FireWire bootable externally enclosed drive
and that could be used as a bootable backup.) Archiving this way is a
way to keep all the files and their status collectively together; then if
something happens to the computer's internal drive, this remains.
To boot the computer from the OS X install disc and see if a disk repair
and a permissions repair can be done in that disc's version of Disk Utility
may be helpful. Not sure if that old of a system will tell you much in this
Disk Utility (on installer disc, but not used to install anything) but you
can Verify the SMART status of a hard disk drive & also try to repair it.
But the drive is over-full if there are only mere MBs of free space. He
should look into the Get Info (File menu in Finder) on the Hard Drive
Icon to see what the total capacity of that drive was, and how little is
remaining; then work on getting rid of non-essential items, so as to
save the system itself from damages. Also, if the computer is getting
older, it may be time to consider a new replacement hard disk drive;
and if so, a larger capacity one could be installed, and the older one
put in an external FireWire enclosure, then the content may be cloned
back into the computer on a partition or direct; so there'd be more
free space that way for the contents. (Or weed out non-essentials, too.)
More information would be needed to proceed, since this situation is
at best sketchy and could be problematic to say the least.
Good luck & happy computing!

Why i can not open Video Capture Device Settings in Adobe Flash Media Live Encoder?

Hi! I've got a problem with Adobe Flash Media Live Encoder 3.2. Why i can not open Video Capture Device Settings? I'm clicking this button, but it doesn't appear, there is just a blinking of the camera's window. Please help me, i'm looking like a shining red pig! Need to change the light or contrast.

"The audio preview in FMLE indicates there IS audio being input"
How do you know this?
are you "Saving to file"? how is the audio in the saved file?
Adninjastrator

HT201250 Backups in time machine visible but I can not open them.

My time machine works theoretically. It backs up and I can see the data there. But it is showen in a light blue/grey colour and I can not open them.

In the Finder, right-click or control-click the folder icon and select Show View Options from the contextual menu. In the dialog that opens, select None from the Arrange by menu. Close the dialog and try again.

I am connected to the Internet (Wifi) but can not open any website

I have not used my Mac Book Air for a while.
Now I am connected to the Internet but can not open any website.
Just nothing happens
Anybody had this issue?

Is there any message shown on the screen?
Power down the router. Unplug it from the wall. Wait 10 minutes.
Plug it back in. Power it on. Wait until all the lights are lit up properly.
Restart the computer.

Process.start("winword", filename) can not open file with space in the path and name

Hi,
I am trying to write a class which can open file with selected application. for simplicity, now I just hard code the varaibles.
the problem: if the path or file name has space in it, even it exist, winword still can not open it.
could someone kindly show me what I did wrong and how to do it properly.
Thanks in advance.
Belinda
public static class FileOpen
public static void info()
string path = @"c:\a temp folder\aaa 1.txt";
if (File.Exists(path))
    // the file I am using in the sample does exist
     MsgBox.info("yes");
else
     MsgBox.info("no");
// working
//Process.Start("winword", "c:\\aaa.txt");
// not working
//Process.Start("winword", "c:\aaa.txt");
// not working
Process.Start("winword", "c:\\a temp folder\\aaa 1.txt");
// not working
Process.Start("winword", path);

string AppPath;
AppPath = ReadRegistry(Registry.CurrentUser, "Software\\FabricStudio", "TARGETDIR", value).ToString() + @"help";
string FileName = "'"+ AppPath + "\\ImageSamples.doc" + "'";
try
System.Diagnostics.Process.Start("Winword.exe", FileName);
can any body please help for this.
where i am making mistake?

Error message when updating Itunes...can not open Itunes program

I am recieving error message when updating Itunes for my computer. The error message reads "MSVCR80.dll is missing and the other error message reads Error 7 (Windows error 126)" I can not open my Itunes. I have reloaded the Itunes onto my computer but still have the same error messages. Please help.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99364)

Can not open some PDFs in Outlook

I can not open PDFs in 2010 Outlook from just one particular email. Other PDFs from other emails open fine.
have uninstalled and re-installed latest Adobe Reader.
How do I fix?

Hi,
Do you mean you can't open PDFs send from a particular email address or just the PDFs in one particular email?
Can you view the PDF from web access?
In addition, please try Anil's suggestion, download the pdf to local and try to open it locally.
Please let me know the result.
Best Regards,
Steve Fan
TechNet Community Support

I can not open light room 3

Similar Messages

Maybe you are looking for