I can not play angry birds chrome after open the web only see a white screen

i open firefox web page and play the angry birds chrome recently but cna not play at all there is big white portion at center no picture turn up pls advice thank you.

Hi,
If you haven't already, try restoring the iPod and setting it up as a new device. This article: http://support.apple.com/kb/HT3828 provides more details about setting the iPod touch up as a new device.
Remember:
If you choose to set up as a new iPhone or iPod, first back up any important backups of that device you want to retain from the backup folders listed above. iTunes only retains one sync-generated backup per device, and the first sync after setting up as new will replace your previous backup. If you change your mind and want to restore to your previous state, you will have to do so from a backup that you have retained through your periodic backup routine. If you have Mac OS 10.5.5 or later and use Time Machine, Time Machine may back up your backup. Copies of a backup marked with a date and time stamp created by selecting to "Restore from the back up of" are retained by iTunes and not overwritten. For an example of a backup with the date and time stamp in the device name, see the picture below in the Deleting a Backup section.
from http://support.apple.com/kb/HT1766
-Jason

Similar Messages

I can not activate my iphone 4 after installing the firmware ios 7, can not remember the password apple id, a check box is all

I can not activate my iphone 4 after installing the firmware ios 7, can not remember the password apple id, a check box are all available, please look into this matter
serial number TP113FG5A4S, imei 012657000548662

Copied from my initial post:
Then you'll NEVER be able to re-activate the phone. This is called Activation Lock & there is no way around it if you don't know that info.
You can try & recover the ID here:
https://iforgot.apple.com/appleid

After updating iOS, I only see a black screen on my iPad asking for a 4 digits passcode, I've tried severeal times and now every time I try I get this message "Ipad dissable wait 60 min... I do not know what to do???

After updating iOS 8.0, I only see a black screen on my iPad 4 asking for a 4 digits passcode, I've tried severeal times and now every time I try I get this message "Ipad dissable wait 60 min... I do not know what to do???

Howdy mendjes25,
It sounds like you’ve recently updated your iPad and now it’s disabled because the passcode you’re entering isn’t being accepted. I can imagine that would be frustrating. Take a look at the article linked below, it describes the alert you’re seeing and provides the possible resolutions for that issue.
iOS: Forgot passcode or device disabled
I hope this helps,
-Jason

After installing my Mac only shows a white screen. Help

I updated and now when it restarted it will only give a white screen.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

T400 overheating playing Angry Birds (Chrome Version)

My T400 seems to be overheating when playing the Chrome Angry Birds. Does anyone have any idea how to prevent. This is with the switchable graphics set to the ATI card.
When asking for help, post your question in the forum. Remember to include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help others with the same question in the future.
My TPs: Twist 2HU: i5-3317U Win 8 Pro, 4GB RAM 250GB Samsung 840 | T420 4177CTO: i5-2520M, HD+, Win 7 Pro x64, 8GB RAM, Optimus, 160GB Intel 320 SSD, Intel 6300 WiFi, BT 3.0 | T400 2764CTO: P8700, WXGA, Win 7 Ult x64, AMD 3470, 8GB RAM, 64GB Samsung SSD, BT, Intel 5300 WiFi | A20m 14.1" PIII 500 (retired). Monitors: 2x Dell U2211h IPS 100% sRGB calibrated w/ Spyder3.

It would get hot enough that it shut down. I never saw it do this, my SO was the one playing. She simply reported that the laptop would get real hot and then turn off / restart.
I updated everything that would auto update, turned off the computer, used some compressed air, and rebooted. It seems fine on the integrated graphics and also seems fine now on the ATI graphics. I will ask her test later with it coming out of the sleep. I think when it first happened the computer had just come out of sleep.
So either it was just dusty (very possible), or maybe there is an issue with having a sleeping computer and then waking it up and doing something moderately tasking?
When asking for help, post your question in the forum. Remember to include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help others with the same question in the future.
My TPs: Twist 2HU: i5-3317U Win 8 Pro, 4GB RAM 250GB Samsung 840 | T420 4177CTO: i5-2520M, HD+, Win 7 Pro x64, 8GB RAM, Optimus, 160GB Intel 320 SSD, Intel 6300 WiFi, BT 3.0 | T400 2764CTO: P8700, WXGA, Win 7 Ult x64, AMD 3470, 8GB RAM, 64GB Samsung SSD, BT, Intel 5300 WiFi | A20m 14.1" PIII 500 (retired). Monitors: 2x Dell U2211h IPS 100% sRGB calibrated w/ Spyder3.

ITunes Music Folder will not play from external hardrive after setting the correct path

I've decided to try and create some more space for my music collection and decided to keep my entire iTunes library on a portable external hardrive. I researched how to do so online and was successful at first. I set the correct path from the advanced menu so that iTunes would recognize and save music to the folder on my HD. It worked fine last night, but today when I try and access it I get the, "could not be used because the original file could not be found. Would you like to locate it?" error message when I try and play a song anywhere in iTunes. I then tried to import the library from my external hardrive and then everything was duplicated. I some how reversed the duplication by using time machine and then redownloading iTunes, which is a riduculous story in itself, but thankfully, I am back at square one.
I have over 24,000 songs with a majority of them rated as well as playlists I do not want to lose. I don't understand why it will not play the songs. Can anyone help me?

If you are going to have the library on an ext HD the transfer the entire iTunes folder. This way you capture all the files - not just the music.
Launch iTunes with the 'option' key down and follow the dialog - tell iTunes to open the iTunes library file on the ext HD and things should be ok.
MJ

After updating the soft my macbook pro can not mount G Drive mobile, after updating the soft my macbook pro can not mount G Drive mobile

I need a suggestion about G Drive mobile which can not be mounted with my macbook pro

Hi Buterem,
I'm sorry to hear you are having issues with your MacBook Pro since your recent Yosemite update. I also apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having intermittent but persistent responsiveness issues with your mouse or trackpad, you may want to try using Activity Monitor to see if these incidents correspond to occupied system resources, especially system memory or CPU. You may find the following article helpful:
How to use Activity Monitor - Apple Support
If the entire system hangs or locks up (for example, if the system clock freezes and stops counting up), you may also be experiencing some variety of Kernel Panic. If that is the case, you may also find this article useful:
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
Regards,
- Brenden

Safari is not playing .mpg videos while navegating in the web

I am having problems with the Safari web browser.
While navigating the web, if I want to watch a video that has an ".mpg" extension, it will simply open a new window and leave it blank without starting the QuickTime plug in to play the video.
I remember Safari used to be able to reproduce almost any type of video files/extensions from the web (after installing Flip4mac...) directly in the web browser, however, not long ago it just simply stopped playing the .mpg extension videos.
I want to be able to view .mpg videos directly in the web browser. Please help me out!
I believe that .mpg is a really common type of file and I just can't believe that the web browser in my iBook G4 is not going to reproduce them....
Thanks!
iBook G4 Mac OS X (10.4.8)

Welcome to Apple Discussions
In System Preferences>Quicktime>Advanced>Mime settings>MPEG, are all boxes selected (they ought to be)? If not, select all, and restart the computer. If all boxes are selected, does the same problem occur if using Safari in another User Account?
Creating a New User Account: Here is guidance from Apple on how to set up the account. You can ignore step 7 in the article.
Also, on the system preference>Accounts panel, click on "log-in" options. There, select "fast user switching". This allows you to go back and forth between user accounts via an icon in your Menu Bar at the top of the computer screen.
Log-on to the new account and start Safari. If the sites are accessible in the new account, then your problem is specific to your regular user account. Otherwise, similar response means a system-wide problem.
iMac G5 Rev C 20" 2.5gb RAM 250 gb HD/iBook G4 1.33 ghz 1.5gb RAM 40 gb HD Mac OS X (10.4.8) LaCie 160gb d2 HD Canon i960 printer

Can nokia 500 play angry Birds?

It runs on anna....will it b able to play a b?

Extreme_farabi wrote:
But Ray...samsung Galaxy has 4 inch display and Samsung Galaxy mini has 3.14 inch display...dis Both can smoothly Run angry Birds...
The version of Angry birds for the Galaxy S has been coded differently to the version that runs on the Galaxy mini because of the different screen sizes and also processor speed and RAM and GPU.
If the Nokia 500 becomes a popular mobile phone, I'm sure Rovio may release a version of Angry birds for it. All we can do is wait and see.
All the best.
Ray

I muted the sound while playing angry birds and now I can't get the sound back. I have the sound on ipod, just not with the games.

I muted the sound while playing angry birds and now I can't get the sound back. I'm fine with ipod, just the games

If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

AFter upgrade, iPhone says tv show (HD) can not play on this iPhone

AFter upgrade, iPhone says tv show (HD) can not play on this iPhone . It is the SNL HD TV SHow will ferrel episode. DOwnloaded from iTunes.

when you bought it, did 2 versions download? For a bunch of shows I bought recently, I got 2 versions - a HD version and a standard (SD) version. To make room, I moved the files off my computer. When I wanted to watch the individual episodes on my iphone, I'd move the SD version back to the computer, and sync it with the iphone. After the recent upgrades - snow leopard, itunes 9, iphone 3.1, something got broken. When I would transfer the SD versions to my computer to sync with the iphone, for some reason something would rename the files with a (HD) tag at the end of the file name (even though they were the SD versions). Removing that tag in finder was all I needed to do to make it work. Odd.

After migrating to a retina macbook with mountain lion I can not play windows media player files with flip4mac anymore

After migrating to a retina macbook with mountain lion I can not play windows media player files anymore. I use flip4mac pro 3.0 and quicktime 7.6.6.
The message I receive is: De bewerking kan niet worden voltooid. (OSStatus fout -50). I also have problems with zip files that can not be saved on the desktop anymore while unzipping.

I actually installed Quicktime pro and Flip4Mac Pro again after I bought the Retina Macbook. Today I did it again but still get the same OSStatus error -50. I guess there is some old file that has to be removed. Flip4Mac comes with an uninstaller. Quicktime does not.
I read that his could be something with security that is why I mention the problem with the zip files as well.

Can not play any video after update to 4.4.2

Can not play any video after update to 4.4.2, it says always that i have to reconnect my HDMI Cable, reason HDCP error.

I have made some tests,
I can only view Trailers, every thing else dosn't work any more. I could not play any Video via Airplay. I tried to do it fom my IPhone 4, my IPad 1 and from my MacBook Pro 15"/i7 2 GHz/Mac OS10.7.2.
It always says the same error.
I reset the divice again and made a restore, but the same error.
I change the HDMI cable, same error.
It works fine before, I had 4.4.1 on it. I'm using a Toshiba Beamer MT700.
Need some help

I can not play any kind of video on my ipad 3 after i installed ios7 please help me

i can not play any kind of video on my ipad 3 after i installed ios7 please help me

I had to reset it again and use the desktop software reinstalling the entire basic software. On your desktop blackberry software go to the software up date thoght tools and if there are no newer veresions available, chose the botton for las version and intall it.

I can not play any games on the new ipad 32 G wifi after take over to oversea , need help please

After I turn off Airplane mode and I want to play games when was downloaded before fly to oversea. I was palying all games on ipad before fly.
now when I turn on ipad and want to paly games but It can not play games on ipad.???
Anyone can fit it on setting?
Need help please.
Thank you.

OK. I am having a little bit of trouble understanding your responses, but let's start with this since you are having an issue with other apps as well.
Reboot your iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. Let the iPad start up completely and then try again.

I can not play angry birds chrome after open the web only see a white screen

Similar Messages

Maybe you are looking for