I can not play the sound?
I can not play or hear the sound.Though side switch indicator moves .
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
Similar Messages
-
I can not monitor the sound from guitar
I have connected my guitar into the new imac using a USB input interface, i can not monitor the sound for some reason, the guitar appears to be being picked up as the green lights on the input monitor are working, any help gratefull received
Can i also add the guitar actually records on garageband but i cant hear it when played back
-
I can not play the sequence in preview mode. How do I fix this issue?
Each frame loads in the preview window when highlighted, but I can not play the sequence.
I am working on a project for school. I have been draging clips down to the timeline and matching it with a few voice overs. Nothing too complex. I have been previewing my work as I go by pressing the space bar, Im not sure what I did but now Premiere will not play the preview in the Program sequence window.
-
I have a pdf file with the added sounds, so I can not run the sound in adobe reader XI on my tablet samsung galaxi pro (android)
Thanks for writing to us. Unfortunately, such advanced javascript support is currently not provided by Adobe Reader for Android.
Thanks,
Adobe Reader Team -
Can not installed the Sound card driver for Windows XP SP3?(CQ40 333TU)
my notebook model is CQ40 333TU, i downgraded from windows vista to windows xp sp3, but i can not installed the sound driver? and i can not found the xp driver in hp web, help me.
This might help>>>
http://h30434.www3.hp.com/psg/board/message?board.id=OS&thread.id=26
http://h30434.www3.hp.com/psg/board/message?board.id=OS&thread.id=230
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
Help, please! i can not get the sound to work on my pc
i can not get the sound to work on my pc
Try opening the device manager and remove your sound hardware and then rediscover. This works often. Let me know how it goes.
iGirlTech -
I can not hear the sound
Thank you very much!!!
I
What I have → Mac Book Pro/ M-Audio KEYSTATION 61 es / Garageband / LOGIC PRO
M-Audio KEYSTATION 61es + Mac Book Pro + Garageband = SOUND OK CAN HEAR THE SOUND
M-Audio KEYSTAION 61 es + Mac Book Pro + LOGIC PRO = SOUND NG CAN NOT HEAR THE SOUND
LOGIC PRO → M-Audio KEYSTATION 61es@ when I hit the key→LOGIC PRO@ can see the blue screen go on and off, but →I can not hear the sound. -
I have final QT H264 1280x720 AAC Stereo 22,050 kHz.
I can not hear the sound, why?
Thanks.Its very strange, I created this file outside FCP, using video gallery software.
I placed in FCP and looking at the Wave Audio its a straight line. Means the audio is there with -1000db
thanks for help, the case is closed. -
I can not play the songs on my iphone 4s, the more they have been transferred to the cell, help please
Connect your iPod to your computer. When you get the message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod. When your iPod appears in iTunes enable it for disk use, this is required for most if not all the utilities listed below so they can access the files: Using your iPod as a storage drive
The transfer of non iTMS content such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. This is just a selection, have a look at the web pages and documentation, they are generally quite straightforward, just check for one that soecifically state they work with the iPod shufle. You can also read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
YamiPod Mac and Windows Versions
iGadget Windows Only
iPod Access Mac and Windows Versions
Music Rescue Mac & Windows
iPodCopy Mac and Windows Versions
TuneJack Windows Only
iPod2PC Windows Only
There is also manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows. The procedure is a bit involved and was written long before iTunes 7 and Windows Vista so it requires a little adaptation as the iPod preferences are no longer in the location mention for instance but if you're interested it's posted in this thread: MacMuse - iPod to iTunes -
computer crashed had to factory recover OS and can not play the 2 movies i purchased prior to computer crashing can not play and can not locate! How do I recover them?
You definitely need to resurrect the old password associated with the Apple ID you used to purchase the music.
Go here: https://iforgot.apple.com
An email will be sent to the email address associated with that account with instructions regarding resetting that Apple ID's password.
If you no longer have access to that email, the resolution to this problem becomes considerably more difficult. In that event you would need to contact iTunes Support and explain your dilemma. -
I can not hear the sound on my I phone 3GS.
I can't hear the sound on my phone. I have reset it and everything. When you press the sound button to raise the volume, nothing goes up. I can plug earphones and it workes but otherwise, it does not. What can I do?
Hello Dexter1954
Check the side switch on your iPad to ensure that it has not put the iPad on mute. Check out the article below for more information.
iPad: Understanding the side switch
http://support.apple.com/kb/ht4085
Regards,
-Norm G. -
I can not play the music on my ipod on itunes
the ipod is working fine the only thing is when I canect to itunes the ipod appear in itunes but I can not play any song
I do not know if the reason is becouse I have the two ipods in the same camputer.is your ipod set to auto sync? if it is, you cant listen to those songs on your computer. if you want to listen to songs that are on your ipod on your computer, set it to manually sync or whatever. that should work.
-
sound does not play on youtube video with an app.
The "restore disk" is built into the Mac. See About Recovery.
Need more specifics about what error messages you got while installing Adobe Flash.
However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
Click the Try something new! link at the bottom of the YouTube page.
I don't know about the sound issue. Might be hardware as you think. Try other headphones to check. -
I have just uploaded a large number of files from a panasonic video camera on to imovie. I have never had this problem in the past, but when I try to play back the files on my laptop there is no sound. I have tried increasing the sound and normalising via the audio settings, and the sound is playing fine on the video camera. Is there anything I can do?
I have also checked that the files are MOV not MPEG etc
-
Hi, I bought CS6 some months ago, tried it briefly and it worked. Now, half a year later, I really want to work it, but it does not play, neither mp3 nor wav-files. I see the waveform, I can amplify it, cut parts of it, edit it otherwise, but the red lline and the yellow cursor do not start/move and I hear nothing. I clicked on the start btton and on the endless button, nothing happened. I am using Windows 8.1. Please, help....
Invariably, when Audition's transport doesn't start it's because you've lost the connection to your sound device. So go to the Preferences menu and Hardware setup, and re-establish it - you should be good to go then.
Maybe you are looking for
-
Problem in BAPI_HU_CREATE
Dear All, Im using BAPI_HU_CREATE for creating the handling unit, but when i run the program, i m getting a message HU cannot be created and the HU is not getting created,pls find the below coding im using in my program and tell me what could be wron
-
Add prices and display in dynamic text box
Hey, I have a combobox and radio buttons with specific prices that I want attached depending on the choice the user makes. I'm having trouble getting the application to add the total of the selections and display the total in a dynamic textbox. I am
-
MaxLimit correlates with Internal Server 500?
Recently we've seen a spike in the amount page requests returning Internal Server Error 500. Here are our current settings for <entry key="jdbc.InitialLimit">3</entry> <entry key="jdbc.MinLimit">1</entry> <entry key="jdbc.MaxLimit">10</entry> <entry
-
Hi, i have a requirement where i need to convert data in my internal table which is in text format to UTF-16 format before downloading it to a file, is there any function module which can be used . Regards, Raghavendra
-
What is the movement type on stock transfer across company codes
<Deleted original post contents and retypes in capitalized letters - moderator > What is the movement type at the time of stock transfer between the company codes.. Edited by: Arun Varadarajan on Sep 1, 2008 10:56 PM