I can not reboot my computer after suspend

Last night I suspend my computer and today in the morning I wake it up ,but It's a little bit slow so I reboot it,and my tragedy comes...I can not reboot,it keeps showing like this :  http://paste.ubuntu.org.cn/100586 ,please help me ....
Regards.
===================
PS:English is not my mother tongue,forgive my syntax fault...

Do you mean reboot, or you cannot bootup at all?
Intel-based Macs: Resetting the System Management Controller (SMC)...
http://support.apple.com/kb/HT3964

Similar Messages

  • Can not sync with computer after installing IOS 8 on iPhone 5s

    I cannot sync with my computer after installing IOS 8 on iPhone 5s. In iTunes I get a dialogue box that says that the computer is not authorized (it is) I deauthorize and then authorize and it comes up again that the compeer cannot synch because it is not authorized. ???

    If it's not an authorized Apple charging cord, it may no longer work.  When I updated the iOS on my iPhone 5, it did the same thing; iOS 8 is just better at recognizing non-Apple cords.  There are a couple that are still recognized, but most no longer work.  I'd already seen it happen when I upgraded to an iPad Air -- it will definitely only accept authorized Apple cables -- so I knew what was happening.

  • I have IMac 10.7.5 Lion I use I forgot the password and I did a few fixes from the we sites, which did not work and now I can not get the computer to reboot the gray screen comes on and if a shift c I get a load bar and it goes half way and help

    I have IMac 10.7.5 Lion I use I forgot the password and I did a few fixes from web sites, which did not work and now I can not get the computer to reboot the gray screen comes on with the apple and if a shift+c, I get a load bar and it goes half way and stops, I can get into the black screen area with the hard drive info
    I did the following:   mount -uw /    rm/var/db/.AppleSetupDone    shutdown/uses/us  reboot Ok I know I should not have, but now I need help to reboot and hopefully not lose everything on the desk top, Linda Markle

    You did the wrong things. In the future it's a good idea to remember not to do something when you don't know what you are doing and what happens when you do it.
    Forgot Your Account Password
    For Lion, Mountain Lion, or Mavericks
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see:
           Reset a Mac OS X 10.7 Lion Password
           OS X Mountain Lion- Reset a login password,
           OS X Mavericks- Solve password problems,
           OS X Lion- Apple ID can be used to reset your user account password.

  • HT1414 I can not sync my iPhone after restoring it - my computer only gives me the restore (again and again and again) option.  I have no music and only a few aps now on my iPhone.  Any tips before I go to the genius bar?

    I can not sync my iPhone after restoring it - my computer only gives me the restore (again and again and again) option.  I have no music and only a few aps now on my iPhone.  Any tips before I go to the genius bar?

    If you restored as new, without using a backup, and still only get an option to restore, there is a hardware problem or the phone was previously hacked (jailbroken, downgraded iOS, unauthorized unlock).  Your only option is to take it to Apple or whoever provides iPhone service in your country.

  • TS4002 I can not activate my iphone after running the software for icloud account not remember, I wish abble to open my computer soon. My phone IMEI 013007007033970

    I can not activate my iphone after running the software for icloud account not remember, I wish abble to open my computer soon. My phone IMEI 013007007033970

    Hi nguyen trong thang,
    I apologize, I'm a bit unclear on the exact nature of your issue. If you are saying that you are having issues activating your iPhone, you may find the troubleshooting steps in the following article helpful:
    iPhone: Troubleshooting activation issues
    http://support.apple.com/kb/ts3424
    Regards,
    - Brenden

  • My iPhone 4 can not reboot after upgrading to iOS 6; keeps trying and cannot shut off either.

    My iPhone 4 can not reboot after upgrading to iOS 6; keeps trying and cannot shut off either.

    I FINALLY got it to work on BOTH iPhone 4 and iPpad 3.  Here is what I had to do:
    Had to DELETE all e-mail accounts including icloud.
    Did a hard reset (hold down button on top right corner and round button on bottom center)
    Then once it came back on, the iPhone had ALL of the accounts still on it and it was receivng e-mail.
    The iPad receive e-mail until I did the steps above 5 times.  Plus, I had to add back all of the e-mail accounts vs. on the iPhone 4 they were there when my phone came on.
    Now I am receiving e-mail on both devices normally.
    No clue why this happened, but Apple needs to find a fix ASAP.

  • I can not charge my Ipad after I droped it,also the home screen dos not work,whats the solution?

    i can not charge my Ipad after I droped it,also the home screen dos not work,whats the solution?

    Hard Reset
    Press and hold BOTH the Sleep/Wake button & the Home button until you see the Apple logo on the screen.
    if no result try to back up and restore via itunes on a computer. 
    if wont restore try this
    recovery mode
    open itunes on computer
    plug cable into computer not iOS device
    turn device off
    hold home button and plug cable into IOS device.  do not release home button until an itunes graphic appears on IOS device.
    look to computer should have message about recovery mode click ok and restore
    Peace, Clyde
    if u need an article see
    http://support.apple.com/kb/HT1808

  • Not working imessage!! I can not send imessage than after apple id. There are problems with Apple ?? Thanks!

    Not working imessage!! Credit card and I can not send imessage than after apple id. There are problems with Apple seeverele?? Thanks!
    Before the service reset function. Wait 24 hours to activate imessage.

    go to the settings and turn off imessage
    but that don't change the issue that you will never be able to facetime eachtoher
    the appleID is really meant as the handle that identify you it was not meant to be shared
    but can see that people may want to do not buy apps more then once

  • Can not do Surrogate bidding after Bid invitaion End date has been reached

    We are on SRM 5 server 5.5
    We are using surrogate bidding to capture  bid responses and we manually receive vendors responses by the End date on the Bid invitation . We are unable to do surrogate bidding after the End date has been reached hence we then change the End date to a later date so that we can do surrogate bidding.
    Is there a way that this can be done without changing the bid inviation end date ?
    Regards

    SAP standard you can not do Surrogare Bidding after the submission date
    We are going to use Follow On documents

  • When opening the Calendar app, I am greeted with a box that says "This calendar can not be refreshed."  After clicking on "OK" another box pops up saying "The server responded with an error."  How can I get rid of these?

    When opening the Calendar app, I am greeted with a box that says "This calendar can not be refreshed," and after clicking ok there is another box saying "The server responded with an error."  How do I get rid of this.  The calendar functions all right, but just have to close both of those boxes after doing any action in the calendar app.

    Please take each of the following steps that you haven't already tried, until the problem is resolved. Back up all databefore making any changes.
    Step 1
    From the Calendar menu bar, select
    Calendar ▹ Preferences ▹ Accounts
    Choose the affected account from the list on the left and uncheck the box marked
    Enable this account
    Then check the box again. Test.
    Step 2
    Make a note of the account settings, then delete the account and add it back with the same settings.
    Step 3
    If you can't add the account, the settings may be invalid. Verify them. How you do that depends on what kind of account it is. If it's a Google calendar and you've activated 2-step verification, you need to generate an application-specific password in your Google account and enter it in place of your old password.
    Step 4
    Quit Calendar. Triple-click the line below on this page to select it:  
    ~/Library/Calendars/Calendar Cache  
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a file named "Calendar Cache" selected.
    Move the selected file to the Trash. There may be one or two other files in the same folder with names that begin in "Calendar Cache". If so, delete those files too.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • I can not open different sites after installing itunes. Why?

    I can not open different sites after installing itunes. I can`t open google.com or youtube.com. Why?

    Before anyone can help, they need information to work with. Basic stuff: What version of iPhoto. What version of the Operating System. Details. What were you doing when the problem arose? Did it ever work properly? Step-by-step descriptions of how you got to this issue. If something doesn't work, are there error messages? What happens when you try to do this thing? And what steps have you tried already to solve the issue. With this kind of information somebody can develop a starting point for troubleshooting the issue.
    Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that a helper is simply guessing. With information, s/he may be able to get your issue resolved sooner.

  • I can not open my CS6, after that 30 day add for CC finally stopped.  I'm not surprised though. How do I open CS!

    I can not open my CS6, after that 30 day add for CC finally stopped.  I'm not surprised though. How do I open CS6!

    Run the cleaner tool and reinstall.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Mylenium

  • Can not play any video after update to 4.4.2

    Can not play any video after update to 4.4.2, it says always that i have to reconnect my HDMI Cable, reason HDCP error.

    I have made some tests,
    I can only view Trailers, every thing else dosn't work any more. I could not play any Video via Airplay. I tried to do it fom my IPhone 4, my IPad 1 and from my MacBook Pro 15"/i7 2 GHz/Mac OS10.7.2.
    It always says the same error.
    I reset the divice again and made a restore, but the same error.
    I change the HDMI cable, same error.
    It works fine before, I had 4.4.1 on it. I'm using a Toshiba Beamer MT700.
    Need some help

  • HT1420 I can not deauthorise my computer . Itunes store issue " Can not deauthorise " I think i chose some wrong items . Please help me !

    I can not deauthorise my computer . Itunes store issue " Can not deauthorise " I think i chose some wrong items . Please help me !

    click on the store tab on the top left of iTunes.  Scroll to where it says "Authorize this computer...".  Click on that and enter your apple id and password then click authorize.  The reason iTunes says that your computer needs to be authorized is because it is to be sure that iTunes knows can trust your new computer

  • I can not run Adobe reader after installing it. A prompt said can only run an instance.

    I can not run Adobe reader after I installed it. I said can only run an instance.

    Hi,
    Can you share the screenshot of the error message.
    Please use the insert image button on the tool bar to insert the screenshot.
    If you cannot share the screenshot, please provide the exact error message with us.
    Thanks
    ~ Aditya Kalania

Maybe you are looking for

  • Install dc on hyper-v 2012

    hi there I wonder I have new server ( dell r620 with e2620)  with 2 raid volumes 1 mirror system 2 disks (sas) 2 raid 5 data  3 disks ( sas ) the server run 2012 (clear with any applications ) now I want to install new server (vm) run 2008 r2 and to

  • Java inheritance and interface code help required

    please help me I need your 30 mins only,,, working on assignment and I am trying to understand interface and inheritance might not need even 30 mins, please add me on skype *[deleted by moderator]* Or add me on yahoo msgr *[deleted by moderator]* wai

  • [Solved] How do I add a PATH to a PKGBUILD?

    I'm trying to add a binary PATH to a PKGBUILD and am not sure how to do this.  The only experience I've had with PATHs is through my bashrc so I'd like to learn how to do this so that it stay persisitent (i.e. through restarts logoffs and such).  The

  • Intercompany Stock Transport- MIRO problem

    Dear Experts, Client requirement is that in intercompany stock transfer the value should post to the respective supplying palnt g/l account. To meet the requirement i have created customer master record for my 8 plants  with diff  account assignment

  • Maximizing Window while Control Hidden Doesn't Behave Properly

    Hi, I've run into a situation where I'm trying to take advantage of the resizing capabilities of LV8.x and I'm running into a snag I was hoping to get some help on. Basically, when I have a (grouped) control hidden and then maximize the window and th