I can not reinstall iTunes.  Corrupted files in AAS

After my Vista update, I got alert that iTunes had a corrupt file and needed to be reinstalled.  I tried repairing with no luck so I uninstalled and redownloaded.   Now when I try to install i get the following error:    Error writing to file: C:\Program Files\Common Files\Apple\Apple Application Support\ApplePushService.dll  Verify that you have access to that directory.   I am running as admin so I do have access. I have tried deleting the AAS file and it tells error 0x80070091.   If i try to open the folder it says that the files are corrupt and cannot be opened.    I have tried system restore back to a previous point and it says I cannot restore due to corrupt files on C: and to schedule check disk at next start up but it never runs when i start up.   I'm @ a total loss!!!  
Thanks for any help!

You're welcome!
Are there risk leaving that other directory that is corrupted on my PC???
The directory itself shouldn't do any damage apart from take up drive space.
You could try using a file deletion utility to remove it. FileAssassin is worth a try:
http://www.malwarebytes.org/products/fileassassin

Similar Messages

  • I have deleted my itunes b/c I the update to 10.5.2 stopped before fully downloading, now I can NOT reinstall itunes

    I have removed everything in order like the site tells me to.  I have restarted the computer and downloaded the newest version, but it will not open.  I click on the itunessetup.exe to run but NOTHING happens!
    Please help....I am SOOO frustrated!
    Thanks in advance!

    I can now get it to run but I can only get so far before I get this message....something about a corrupt cabinet file "i tunes.cab" .
    Please help!

  • I can not reinstall itunes ,

    I have sw mcafee off and still cannot recover itunes ,which is now 6 .I had previously bought 100 songs aprox. how can I recover my songs , please help me .
    thks Manuel

    hi Manuel!
    are you getting an error message on the installation? if so, what does it say? include error message numbers if you're getting any.
    love, b

  • I am trying to update to iTunes 10 to us my new iPad, but I can not remove a corrupted "apple software update" program... I can get everything else off, but due to "previous version" of software update it will not continue.

    I am trying to update to iTunes 10 to us my new iPad, but I can not remove a corrupted? "apple software update" program... I can get everything else off, but due to "previous version" of software update it will not continue.
    I stopped in to see one of the genius at the local store who referred me to "Windows Installer 4.5 Redistributable" (I am trying to install it on a Windows XP System)
    The last version on iTunes on my PC was iTunes 7.
    Thanks for your help,
    Julia from Woodridge

    Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove".
    Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
    (If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

  • TS5376 I can not install itunes.  I get Runtime Error!  R6034.  An application has made an attempt to load the c runtime library incorrectly.  Please contact the application support team for more information.  I've been uninstalling, moving .dll files, re

    The other day I was prompted to update itunes.  I started to, and it crashed my itunes.  Then I tried to uninstall itunes, so that I could turn around and re-install it again.  Now I can not install itunes.  I get Runtime Error! message. R6034.  For the last two hours I have  tried deleting itunes, moving the .dll files to the desktop, restarting the computer (more times than I can count), deleting the temp files, updating my internet explorer, using the fix it program,..... 
    The two messages that I am getting are:
    Runtime Error! Program:c\Program Files (x86)\itunes\Tunes.exe     R6034   An application has made an attempt to load the c runtime library incorrectly.  Please contact the application's support team for more information.
    Also:  Service to 'Apple Mobile Device' (Apple Moblie Device) failed to start.  Verify that you have sufficient priviledges to start system services.

    I too was getting the same message regarding R6034. After many frustrating hours I went to the iTunes support page and clicked on "install and update." When that page came up I scrolled on to "removing and reinstalling iTunes......" There they tell you what files need to be removed and what order to do it in so you can reinstall iTunes. My iTunes works now and I didn't lose any music.
    About the Apple Mobile Device, well that's one of the files that has to be uninstalled. When you reinstall iTunes the Apple Mobile Device is automatically reinstalled.
    Hope this works for you as it did for me. Warning: it takes about an hour to do all this.

  • I can not open iTunes. It started when an upgrade appeared. Now I get this message when I try to open itunes. can not find MSVCR80.dll     Then I get ERROR 7 (windows error 126)   I tried reinstalling iTunes but that did not help. Please Help Me!

    I can not open itunes on my computer. It started when an upgrade appeared. Now I get a message that states This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem. I tried to reinsall the application but it did not help. I also get a message iTunes was not installed correctly. Please reinstall iTunes   Error 7 (Windows error 126)   Please Help me!

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99623)

  • I've tried multiply times to update itunes 10.5 but it keeps saying that it can't find the file and i can't reinstall itunes because it will delete the 100 gigabites of info on it what can i do

    i've tried multiply times to update itunes 10.5 but it keeps saying that it can't find the file and i can't reinstall itunes because it will delete the 100 gigabites of info on it what can i do

    I've had all kinds of trouble keeping my iTunes software current over the past year, but have found the easiest way to remedy the issue is to simply download the latest version of iTunes as though I am a first-time user and then just install it into the directory my current version of iTunes is using. Doing this has allowed me to update my software without losing any of my media/data. Hope this helps! Best of luck!!!

  • I can not upgrade from 10.2 to 10.6 because of missing "itunes.msi" file.  How do I repair it? I can not remove itunes and start over.

    I can not upgrade from 10.2 to 10.6 because of missing "itunes.msi" file.  I can not delete ITunes and start over either.

    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Why can i not reinstall itunes?

    why can i not reinstall itunes? my computer says that windows installer may not be installed correctly or that my computer is on safe mode which it is not.

    Is this a 64-bit system? If so, try the following user tip:
    "The Windows Installer Service could not be accessed" error messages when installing iTunes for Windows on 64-bit systems

  • I can not get itunes to install and open on my new laptop i am so frustrated i have uninstalled and reinstalled at least a dozen times in the last month

    i can not get itunes to install and open on my new laptop i am so frustrated i uninstalled and reinstalled at least a dozen times in the last month
    i got a error 7 this time but have had diff ones befpre please help

    Will iTunes open in safe mode? Hold down CTRL+SHIFT as, or immediately after, you click the icon that starts iTunes and keep holding until you see this prompt.
    Click Continue.
    Assuming iTunes has opened, enable the menu bar, if necessary, with CTRL+B. Then go to Edit > Preferences > Store and untick Show iTunes in the Cloud purchases. Press OK, close iTunes, wait until it has had a chance to fully close then reopen.
    Will iTunes open normally now?
    If not, see Troubleshooting issues with iTunes for Windows updates for genral advice.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2
    tt2
    Message was edited by: turingtest2

  • Why has iTunes taken over the iPhoto file?  I can not attach pictures to files because I can not find them.  I can not upload pictures to software like Shutterfly for the same reason.

    Why has iTunes taken over the iPhoto function?  I can not attach pictures to files because I can not find them.  This has happened suddenly as if there were some keystrokes that changed the previous pattern. I am not able to upload pictures to programs such as Shutterfly because I can not find them.  When I try to upload, the computer takes me to an iTunes folder.

    How are you uploading?

  • I can not get itunes to download to my computer, keeps saying a temporary file can not install, got any ideas

    I can not get itunes to download to my computer, keeps saying a temporary file can not install, got any ideas.

    keeps saying a temporary file can not install, got any ideas.
    What's the precise text of that message, please? (There's a few different ones I can think of that you might be getting.)

  • HT1349 Can I reinstall ITunes and not lose all my music ????

    I am getting the message "MSVCR80.dll missing from your computer.  Try reinstalling the program to fix the problem."
    Can I reinstall ITunes without losing all my music ????

    Hello,
    "iTunes Store purchases or songs imported from CDs are saved in your My Music folder by default and shouldn't be deleted when you remove iTunes. While you probably won't lose any content in your iTunes Library when following these steps, it's always a good idea to back up your iTunes library."
    Source: http://support.apple.com/kb/ht1925
    Cedric

  • I installed a new vision of Itunes that was sent to me but now can not run ITunes

    I tunes was working great up to today when I installed the new vision sent to me now I can not open Itunes I get this message Itunes was not installed correcly. Please reinstall Itunes Error 7 windows error 126. I try to reinstall Itunes but it does not help not sure what to do next.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
    C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    and paste into:
    C:\Program Files (x86)\iTunes
    The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
    tt2

  • Recently updated Mac OS 10.5.8 to 10.6.8 and and can not open exisiting Illustrator5 files or save new files.

    I recently updated my MacBook Pro OS from 10.5.8 to 10.6.8 and can not open existing Illustrator5 files or save new files can someone help?

    I think you have a corrupted upgrade. Do you have a backup of your old system?
    Here's what you should do for now:
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

Maybe you are looking for

  • Exporting data to Excel 2007 from SAP report

    Dear all, Earlier we used to have Excel 2003 and while downloading data from MC.9 Report - Export - Transfer to XXL, we could able to download the data. Now we have installed Excel 2007 and trying to download the data from MC.9 report, its opening ex

  • How do I sync my Mac with my iphone

    Hi I need a bit of help I'm trying to figure out why the pictures taken on my iPhpone 4s don't automaticly show up on my Macbook Pro, I't be supper if anyone can help me. I've signed into iCloud and my ID is the same as far as I known. Sweetbrandigir

  • Output based on language sel

    Hi All,        I have created a ALV report, in the sel.screen I have 2 radiobuttons with text English and Arabic. Now if I excecute the report with English, the O/P should be in English and if I excute the report with Arabic, I want the O/p to be dis

  • IS there static variables in oracle 9i??

    Hi, I have a requirement. I am establishing an orcale 9i connection from my .net application. Now I am calling an SP and it has a global count variable initialized to 0, and It fetches a count of * from one table and also there are other functionalit

  • CS5.1 - OpenGL stops working after making a lasso selection

    I'm starting to tear my hear out at the moment. Everything was working fine with CS5.1 on a 32bit version of Windows 7, then out of the blue I got multiple warnings from windows saying that my hard drive was about to fail. Thankfully I managed to get