I can not restore my ipad air

I have the iPad Air when you attempt to run appear an apple and does not work and when you attempt to restore it shows the error 17 and some times 2005 what can i do

Hey Sohaib99,
Thanks for the question. You can check for information based on restore errors in the following resource:
Resolve iOS update and restore errors - Apple Support
http://support.apple.com/en-us/ts3694
Thanks,
Matt M.

Similar Messages

  • I can not restore my ipad, its giving the message

    I can not restore my ipad its giving the message : The Ipad could not be restored, an unknown error has occured (1)

    Hi ..
    Instructions for you here >  iOS: Unable to update or restore

  • How can I restore my iPad Air to factory settings as I don't have internet on my laptop. After I erased everything from settings. It shows to restore n update through Apple server. Pls help me how to restore it to factory settings.

    How can I restore my iPad Air to factory settings as I don't have internet on my laptop. After I erased everything from settings. It shows to restore n update through Apple server. Pls help!

    Without internet connection there is no way for you restore the iPad.

  • I can not restore my ipad

    I can not restore my I Pad my i pad is an I Pad 2 Error 1611 shows up every time i try restoring. Can someone please help!!!!

    Not sure if you've seen this kb...
    http://support.apple.com/kb/TS3694#error1611

  • Can not get my ipad air 2 to reset or reboot

    I have an ipad air 2 that I believe is running IOS 8.1. I jailbroke it using Pangu. After not finding much need for a jailbroken devise I went to reset the ipad to factory settings. I backed up the devise to my macbook and followed the reset procedure going to settings, general, reset, and erase all content and settings. The ipad then restarted and it appeared to be doing it's thing. The ipad rebooted after a while and the apple logo appeared, then After about 2 hours the apple logo was still there and it seemed to be stuck.
    I then plugged the ipad into my computer and opened itunes. itunes recognized the ipad and give me the option to set it up as a new devise or restore from back up. I choose to sset up as a new devise. The ipad then just displayed the apple logo for a few more hours, once again it seemed to be stuck. I preformed a hard reset on the ipad by holding the power and home buttons at the same time and reconected it to itunes. Now itunes does not even recognize the ipad when it is plugged into the computer. I reset the devise several times and it still will not get past the apple logo.
    I then powered the ipad off and let it sit overnight while I searched online for a solution to this problem. the next day it appears that the battery had been completely drained because I was getting the low battery symbol when I was trying to turn the ipad back on. I then plugged it into my macbook and let the battery recharge for about an hour. I then tried to put the ipad in rocovery more and reset it from itunes, but now it looks like it is not going into recovery more. I have held down the home and power buttons while powering on in an attempt to put it into recovery mode and that does not seem to be working. I tried to do a recovery fix using redsn0w but that did not work either.
    I would really like to be able to fix this thing on my own before sending it to apple. If anyone has any ideas or suggestions on how to fix it I am all ears. At this point I just want to reset it to factory settings. I do not care if I am able to recover any of the data that was on it. If anyone can help me get this things working I would be willing to send you some $$$ via Paypal for your time. Thanks

    Jailbreaking violates the Apple warranty and licensing agreement and voids ALL support from Apple.  No one on here can help you as doing so is a violation of the Terms of Use of these Communities.  If you send the iPad to Apple they will just send it back to you as they are not permitted to work on a machine that has been jailbroken.

  • HT1766 I can not restore my iPad from my iCloud as it asks for my old Apple ID. The Apple ID Can not be changed. I have lost all my content and I am desperate to get it back - Please help!!!

    I needed to restore my iPad but I can not back up from my iCloud as it is asking for the password of an old ID. It has been some time since I changed the ID and all seemed to work fine..... I have lost all my content unless I get this back - please help!

    Sync with new computer
    https://discussions.apple.com/docs/DOC-3141

  • I can not restore my ipad because I don't remember my password

    I follow the instructions for restoring my ipad but it still does not work because it say's I need to put in my password. Well, I don't know my password that's why I'm trying to restore it. I need help please

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • Can not activate my ipad air?

    I bought new iPad Air but can not activated. what are the solutions?

    What happens when you try to activate your iPad?
    If there is an error message, what is the exact complete wording
    of that message?
    You need to provide some more details before someone can offer
    a solution.

  • Can't Restore/Update iPad Air. Stuck in DFU mode

    I'm not sure what else to do as I've looked and researched and can't figure this out. I'm trying to update my iPad Air to iOS 8.1.3, started at 9 PM and now it's 2 AM. Each time I attempted to update the iOS, I got the iTunes error 17. Research said it may be an issue contacting Apple servers, so I after doing research I edited my hosts file and added 74.208.10.249 gs.apple.com to it. After doing that, I get error 3014. At one point I was able to get past that, but then I got error 2005. As it stands now, my iPad is stuck in DFU with the iTunes icon saying to connect it but I can't do anything to get it back up. Can anyone please help figure this out?... To summarize:
    1. iTunes gives error 17 with:
    120.0.0.1 localhosts
    ::1           localhosts
    74.208.10.249 gs.apple.com
    2. iTunes gives error 3014 with:
    120.0.0.1 localhosts
    ::1           localhosts

    Forgot to mention, this is the most recent version of iTunes 12.1.0.71 and I'm using Windows.

  • TS3694 I can not restore my ipad after an update

    I tried to do my update on my ipad and it went into restore mode.  I can't restore it after I had it plugged into the computer and it went on the apple site.  Can anyone help?

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • Can not restore the ipad error 14

    I have tryed several times to restore my Ipad and get the new software version, but i receive a message error 14

    Have you found out how to fix this issue yet? I am still having this problem.

  • I can not restore the IPAD 2

    Good day!
    IPad 2 3G 32 GB
    there is such programs, in which the screen does not go out when idle and continue to live their lives and conserving device, like a week ago so left and forgotten in a day no matter how much tried to include not turn on when the system is charging appears to connect to itunes.
    Now it does not start at all, can only be translated into DFU (HOME POWER 10 sec, then HOME 10 sec), the firmware was 5.x, I do not remember.
    connected to itunes, trying to restore (PC with win 7 x64), removed the antivirus, firewall turned off, the error 1602 to latest firmware (6.1).
    Sew while trying to previous official firmware using "SHIFT restore" - Error 1394
    Sew tried to MACBOOK, the same mistake in 1602 to the latest firmware.
    tried the above on WiFi or directly via ethernet.
    read different forums, clean file hosts, back returned the 74.208.10.249 gs.apple.com to hosts, test it on a software update itunes and Windows, running the test in itunes, changed only the error number - 1602, 1601, 1600
    do not want to put different jailbreak, like the official standard firmware, so that was or the latest firmware (6.1).
    help advice what to do next, such as the standard operation of the recovery, the official firmware and it fails.
    I NEED HELP!!!
    Regards, D-A-N

    Hi imobl,
    Thanks for the reply.
    My issue is that I never actually backed up contacts or camera roll to any program like outlook or image viewer etc. Contacts and photos were just kept on the phone. I have been able to  view the itunes backup file  that is on the computer. The backup file has all my contacts and images on there.
    Are there any ways to get these contacts and images back into my ipad 2?
    (I have tried to import the contacts files from the itunes backup file into outlook but outlook does not understand the format.
    I have also tried to import the picture files from the itunes backup file into Irfanview but Irfanview doesnt understand the format either)
    I just realised I wrote the iphone model incorrectly. It was a 3 (not 3g) so I wasnt able to track it unfortunately as it was not able to connect up to Icloud etc

  • Can not restore my Ipad 2

    Hi all
    Please help. I tried to update my Ipad 2 to IOS 6 , but I dont know what happed , I saw the apple logo and the loading bar moving ,so I left it there . When I got back to it was blank , so I turned it on and the plug into itunes logo appeared . So , I plugged it into the computer and Itunes said ipad in recovery mode , so i clicked update and restore , then the loading bar came up on itunes , nothing came up until it finished and then , Itunes says it got disrupted , check your wifi connections and try again later . my connections are always five bars and i did not do anything when it was updating , it tried about four times but it said that every time .
    Please help , I will do anything to see the homescreen again.

    iPad Recovery Mode = http://support.apple.com/kb/ht4097
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.

  • My Ipad on version 6.1.2 , I can not updated to 6.1.3  and I can not restore it as we'll . I have tried with ITunes and with the device it self , please help

    I can not restore my IPad and I can not update it  . I tried with ITunes and with the device as well
    Any help. Please

    It really helps if you describe what is happening, otherwise there is no way to offer meaningful suggestions. Just saying "I can't ..." Doesn't tell us anything helpful.

  • HT1369 I can not see my ipad on itunes

    i CAN NOT SEE MY IPAD AIR ON ITUNES

    Hello rodfrommasterton,
    I understand that your iPad Air is not recognized by iTunes. The following article may help to resolve your issue:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks,
    Matt M.

Maybe you are looking for

  • How do I move a pattern layer independent of its vector mask?

    I've created a pattern fill layer and assigned a vector mask to it. How do I move the pattern around without affecting the mask? I realize if I want to rotate the pattern I'd need to convert it to a smart object, but if I only need to adjust the patt

  • PostNetText hits the server twice for a single call

    I'm having some serious problems with a Shockwave bug regarding the behavior of postNetText. In a Shockwave test movie I've created, I'm calling an in-house web service as follows: on makeRequest theRequestURL   gNetID = postNetText(theRequestURL, me

  • Where can i see Java restart log?

    Hi, I have an error and doubt the cause is because of restart of java side.i know i can check SM21 to see the log about ABAP side,then how about java side?Our system only restart java stack.so i want to confirm the restart of java was done or not. Wh

  • Log4j message Problem

    Problem description: my logger.info statements from my classes are logged in to the app.log file which is my application log file and also on my Websphere console (System out.log ) staements are displaying , actually my requirement is to see logger s

  • Accessing Oracle 7 DB from Novell Server

    We are using a novell server with netware as our web server. I want to access the Oracle 7 database that is on our unix server using java. Do I need sql*net and the jdbc drivers on the novell web server?