I can not restore my iPhone 3.error. message iPhone software server not available?

I have tried to restore my iPhone 3 but it comes with the error message 'can not be restored, software server could not be contacted or is temporarily unavailable. Please help.

https://discussions.apple.com/message/19275442#19275442
Hey try this. It's my post and I found a fix that might help you. It might not but it's worth a try if you are still having problems. You may have already tried it, so did I, easily over a hundred times now over the past 5-7 weeks now.
Hope it helps. Or if you find another fix, let me know for reassurance that if it happens again there's another way to get around the iTunes restoring problem.

Similar Messages

TS3899 Not able to access gmail thru iPhone. Error message states "mail server not accessible"

Not able to access my Gmail in my iphone. Error message pops up
"...... mail server not responding ........"

Did this used to work or have you just set it up for Gmail access? Did you do it in accordance with: http://support.apple.com/kb/ht4810 ?
Are you accessing it via cellular network or WiFi? If WiFi then is this your usual network?
If it has been working fine for some time and now suddenly you get this message having changed nothing then it is most likely a temporary glitch at Google end or your ISP perhaps.

HT1925 Can't update iTunes because of error message "iTunes.msi is not a valid installation package for the produce iTunes". How can I fix this?

I can't update iTunes because of error message "iTunes.msi is not a valid installation package for the product iTunes". How can this be resolved. I am using a PC with Windows XP

If you can, uninstall and reinstall itunes..... Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Hope this helps.

I can't connect to Time Capsule- error message: Backup disk is not available. Was working fine before.

I can't connect to Time Capsule- error message: Backup disk is not available. Was working fine before.

Restart it.. Does this all the time with Lion and even worse ML.
Restart the whole network if that doesn't work.. do it in correct order.. from off.. modem.. TC.. clients 2min gap.

Ipod will not restore, I keep getting error message 1604

I have an Ipod 3rd generation touch and when I was syncing my ipod it asked if I wanted me to restore it. I went through the step to restore the ipod and but it won't restore and I keep getting message 1604....does anyone know how to fix this ! !

Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and reopen iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Above from:
http://support.apple.com/kb/TS3694

Can't Restore Ipod...error message

I presume I need to restore my 5th gen Ipod as I can't sync it with itunes. However I also can't restore it.
I get a 1418 error message, also had a -50 error message too.
It has worked once since i got it, i synced it with a mates computer. But I can't get it to sync with my new comp at all.
This is very frustrating as i've not been albe to use it at all. Its just a pretty external hard drive at the mo!
I take it formatting it with windows would be a very bad idea?

I HAVE A 20G IPOD THAT IS 1YEAR AND 10 MONTHS OLD. IT WILL NOT RESTORE ANYLONGER AND SHOWS THE SAD IPOD ICON. I WANTED TO SEND IT IN FOR REPAIRS BUT BECAUSE IT IS PAST THE 1 YEAR WARRANTY ALL IPOD WILL DO FOR ME IS SELL ME A REFURBISHED IPOD FOR $271.94. IPOD SHOULD RECALL THE IPODS THAT ARE FREEZING AND SKIPPING SONGS THAT ARE NO LONGER ABLE TO BE RESTORED. I CANNOT FIND ANYONE TO REPAIR MY IPOD OTHER THAN APPLE JUST WANTING ME TO BUY A REFURBISHED ONE THAT COSTS ABOUT $30 LESS THAN THE BRAND NEW ONE I BOUGHT 1YEAR AND 10 MONTHS AGO. I AM VERY DISSAPPOINTED WITH APPLE IPOD AND I WILL NOT BUY THEIR PRODUCTS AGAIN.

HT1237 My MacBookPro9,2 gets error message: "This software is not supported on your system." Audio jack is ignored. What else can I do?

MACBOOK Pro 13-inch Mid 2012
2.9GHz Intel Core i7
8GB 1600 MHz DDR3
Intel HD Graphics 40000 512 MB
Mac OS X Lion 10..5 (11G63)
Model Identifier:                    MacBookPro9,2
Boot ROM Version:          MBP91.00D3.B08
SMC Version (system):          2.2f44
Passed Last Power on Self-Test
The MacBook EFI Updater File that I downloaded from the Apple website for Support:
http://support.apple.com/kb/HT1237
--> shows my Model McBookPro 9,2 as needing
EFI Boot ROM version MBP91.00D3.B08 (EFI 2.9) (http://support.apple.com/kb/DL1593)
SMC version 2.2f44 (SMC 1.8) (http://support.apple.com/kb/DL1633)
I downloaded and tried to run both the files
MacBookProEFIUpdate2.9.dmg 9/19/12
AND
MacBookProSMCUpdate.pkg
as offered on this matrix, which instructs:
"This article lists firmware updates that were released for Intel-based Macs. They update the firmware that originally shipped from the factory. If your computer does not appear on this list, an update from the factory firmware is not necessary.
If you are unsure whether your computer needs a particular update, simply download and open the update installer. The installer will alert you if the firmware update is already installed or not needed."
and instead of a message telling me of the proper update
"This software is not supported on your system."
So, why would the manual updater not tell me I already have the proper SMC and EFI updates?
What is the reason I get the message that the software I downloaded from Apple Support is not supported on my system?
Is this indicative of a larger problem with my MACBOOK PRO?

[email protected],
why were you trying to reïnstall the Boot ROM and SMC versions that were already installed on your MacBook Pro?
I agree that a “not supported” message is certainly less clear than an “already installed” message would have been.

Can't open "People" due to error message saying email address not found

Unable to access addresses saved in "People". I am able to open, but error message reads that email address cannot be found.

I suppose you mean a webmail service, but it might help to know which one.

HT4108 Digital AV adapter does not support iPad 2. Error message "This accessory does not supported by iPad"

Just bought latest digital AV adapter MD098ZM/A. Does not work with my iPad 2. Error messade" this accessory is not supported by iPad" while the package saying it supports iPad 2 and later.

It's works with the new iPad. It said "accessory not supported". I clicked OK and now it works.

Video will not play on BBC site error message this content does not appear to be working .Help

I have bbc news as home page after i updated to firefox 10 if i try to play embedded video i get the eror message [this content does not appear to be working] Help

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Firfox will not open. then it gives a message of proxy server not allowing connection

Firefox will not allow me to open it. When I could open it, it tells me a proxy server is not allowing a connection.

In Firefox 3.6.4 and later the default connection settings have been changed to "Use the system proxy settings".<br />
See "Firefox connection settings" in [[Server not found]]
You can find the connection settings in "Tools > Options > Advanced : Network : Connection"<br />
If you do not need to use a proxy to connect to internet then select No Proxy

I just updated my IPad to iOS 5 and now can not send email. The error message says the server rejects the address which is not true Asti sends on my desktop.

I just updated my iPad to iOS 5 and now can't send email- I have tried the obvious but no luck. Any suggestions?

Usually 'authentication required' means that you need to submit a username (or e-mail address) and password to the e-mail server, when sending a message. This logic is not different between Outlook and Thunderbird, and even with the latest and previous version of Thunderbird.
Of course you can try the previous version again to see if it solves the problem, although you'll be less secure because you would be missing the latest fixes.
If you'd be willing to get back to Thunderbird, say if your frustration level with your new app would increase too much, please see our article [https://support.mozilla.org/en-US/kb/cannot-send-messages cannot send messages] for further help.
In all other cases I'd appreciate it if you could mark this as answer so we know you don't need further help.

Not supported: Cannot obtain an error message from the server on Win7

App is written against the RDC and runs fine on Xp, but on Win7 it fails when I change databases. Ie you can select from several databases from within the app. When doing so the app closes the RDC connection:
     if (m_Application != NULL) m_Application.Release();
     m_Application = NULL;
     if (m_Report != NULL) m_Report.Release();
     m_Report = NULL;
So that it is then reopened. This works fine on Xp, but not on Win7. I also tried the 11.5 Sp4 runtime. The ODBC log complain about an invalid handle.
I know that the RDC is deprecated, but I wonder if anyone else has run into this?

Go to this link, and book mark it, and it will get you to our download page:
http://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htm
Select Crystal Reports Release 2 and then Service Packs
Thanks again
Don

IPHONE 5: can't receive calls & random error messages, such as "could not activate cellular data network" and "no connection - network unavailable, please connect to wifi or cellular network." This occurs even when signal strength or wifi is operational.

IPHONE 5: can't receive calls and random error messages, such as "could not activate cellular data network" and "no connection - network unavailable, please connect to wifi or cellular network." This occurs even when signal strength or wifi is operational, and it does not matter whether wifi is on or off. ATT went through the standard protocol - resetting network, resetting sim card, etc. No changes. Other phones working fine in same region with same carrier. Apple's solution is to restore software, but haven't gone there yet. Anyone successfully addressed this/these issues?

I should point out that it worked when the iPhone was set back to factory settings, but when restored with the backup, data/internet no longer works again, and I get the "Could not activate cellular data network" error message yet again.

Error message iPhone 5s could not be synced because the sync failed to start

My iPhone 5s will not sync i get the error message "iPhone 5s could not be synced because the sync failed to start"
running IOS 7.1.2
Macbook Pro running 10.9.4
iTunes 11.3.1.(2)
i did not load any new apps this just started. Thanks.

Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

I can not restore my iPhone 3.error. message iPhone software server not available?

Similar Messages

Maybe you are looking for