I can not run firefox with old northern utility at same time

I CAN NOT RUN FIREFOX WHEN MY NORTHERN UTILITY IS RUNNING AT SAME, WHEN I SHUT DOWN THE NORTHERN UTILITY THEN THE FIRE FOX WILL RUN, PLEASE TELL ME WHAT CAN I DO KEEP THEM BOTH RUNNING AT SAME TIME! THANKS !
THE SYSTEM IS XP NOTE BOOK !

You'll either have to modify yourself, ask the poster in that other thread for it, or use the LabVIEW driver.

Similar Messages

I can not establish more then 1 call at the same time

Hi,
I have SPA9000 with four active accounts. I can not establish more then 1 call at the same time. Accounts are all in registered state. The field in SIP tab, Default Group Line:, is by default: 1,2,3,4 which means if line 1 is busy try the next one in the order ( in this case number 2). But this is not happening. It always tries to dial out with the first line (account). There is no problem with the provider and I don't want to specify groups of userID's and to assign them special line for dialing out.( by the way in this way it is possible to establish more parallel calls, but then each user will always have to dial thru specific line only). Please help me to find out if the SPA is faulty or give me some workaround, so that when I try to make a call , if one line is busy to dial out thru the next available.
P.S. I suspect that SPA9000 does not notice when the line is busy or not. Maybe there is some issue with the Control Timer Values (sec) on Regional tab.
Thanks,

no it can only be one person at a time

"you can not use multiple instance of Program at the same time"

Hello @ all,
I have a Problem, after the installing from Acrobat Testversion and acrobat reader in version in "all Combination" 8 an 9.
I get this misstake information "you can not use multiple instance of Program at the same time" if I want open more then 1 .pdf.
If I have no pdf open, but acrobat/reader so i can´t open with the same Misstake.
I have deinstalled and installed, Allways I bekame the same information. I tryed all things to clean and know i don`t know forward.
Important: by Drag an Drop in the Acrobat Reader it is going, but by direct click on the pdf i get mistake.
Maybe, you know what I can do!
Thanks for help!

Installation of both Acrobat and Reader in the same Windows machine is not advisable. If I were you, I would remove both completely and then reinstall the one you want to keep.

Can I run two copies of FrameMaker at the same time?

I am trying to learn Structured FrameMaker. Is it possible/legal/safe to start two copies of FrameMaker on my PC at the same time?
Specifically I want to have one copy open in Structured FM to experiment and the other copy in Unstructured to take notes on what I am learning. I am trying to see if I understand the concepts by writing up a tutorial but I do not want to be locked into structured mode when do not have a template which covers all of my needs ( I am still figuring them out) and I do not yet really understand what the structured templates do.
Will the documents save by the rules of the window they are in? What other problems will/could I encounter?
Thanks,
Marjorie

Marjorie,<p>If your machine has sufficient disk space and memory, yes, you can run multiple copies of FrameMaker at once. To run the different user interfaces at the same time, you'd have to start both copies. Then, change the user interface in one copy. Since the change doesn't take affect until you restart FrameMaker, shut down that copy and start a new one (leaving the first user interface in effect in the other original copy.<p>All that said, I suspect you can do the testing you want in one copy of FrameMaker, using the Structured FrameMaker user interface. The structured user interface simply means you can work with structured documents; you can also work with unstructured documents. Each document is independently structured or unstructured; in fact, each flow is independently structured or unstructured. You might therefore consider using the structured user interface and opening one structured and one unstructured document in a single copy of FrameMaker. Or create a single document with side-by-side flows and put structured content in one and unstructured content in the other.<p>Just remember that some of the dialog boxes are slightly different in the two user interfaces. For example, the marker, anchored frame, insert table, and cross-reference dialog boxes all let you select an element tag. Since there are no element tags in an unstructured flow, the element tag text boxes in these dialog boxes shows <Unstructured>. If you are willing to ignore these differences, I recommend you do your experimentation in a single copy of FrameMaker.<p>--Lynne

Can you run Edirol / Focusrite firewire interfaces at the same time?

Hey Guys,
I have an Edirol FA-101 but i'm just about to get a Focusrite Saffire (or maybe a Motu 8pre...haven't decided yet) and was wondering if I can run the 2 interfaces at the same time for more inputs...i know i can chain 2 of the edirol ones but i'm not sure if it works with different makes.
Thanks

so I actually did get myself a focusrite saffire pro 26 and it's pretty cool (apart from the focusrite computer side interface that seems to have a few bugs when you control by hardware...)
I'm probably gonna get myself an octopre or a twintrack pro to make use of at least some of the extra digital inputs but for now I have the semi redundant Edirol FA-101 in my rack, if I can get the two working together then that's great!
I have tried what you said and it did pair them together however it made a really awful noise when trying to record, just intense digital distortion and i'm not really sure why. I'm running it all from a macbook pro with only one FW port (that has the Saffire / Edirol / FW Hard drive / Liquid Mix running from it in that order) do you think this order is more the problem?
Dave

Can you run 7 and 6.5 at the same time?

Since one of the key features I use is missing in version 7 (duration of a selection) I'm wondering if I can somehow run 6.5 along with V7 and, if so, how this would be done.
Thanks!
Rusty

I use both (6.5.2 and 7.0.3) on my Mac mini.
You can only have one "install" of QT on the machine but you can use the QuickTime Player from both versions at the same time.
Version 6.5.2 will run "on top" of the version 7 "framework". You'll have all of the "old" menus when you use it. But you'll also have access to the new H.264 video codec.
Find a copy of QuickTime Player (maybe a back up or a different machine) and place it on your Desktop.

Can you run different processors in G5 at the same time

Hey, I have a G5 dual processors, one 1.8 top and 2.0 bottom.
Can I run them together in a G5?
Both work properly.
Thanks

Well, I found out, in one way it works, but ultimately doesn't.
With a 1.8 in the top and 2.0 in the bottom, the computer boot up to the startup hard drive but the fans amped up, I assume to avoid overheating.

Can't run wiki and web services at the same time?

I'm a newbie with Lion Server, but I've been running several web sites successfully for about 6 months. I'm up to Server 10.7.4.
I've been trying ever since the first installation of Server to get the wiki service running. I had absolutely no luck until I turned OFF the web service (always got the "URL does not exist" error when I tried to create a group wiki from inside the Server app). With the web service off, it all starts up fine and I created my first wiki (woohoo). Turning web service back on kills access to the wiki. I don't find reference to this in any of the dicussions, and especially not in Apple's documentation.
Are the Wiki and Web services mutually exclusive? Or is there a way around this?
I'm using Dyndns to provide me with sub-domains to use, and I've dedicated one of them to the wiki service. Traffic comes in on port 8080, where my web sites are on port 80.
Thanks for any pointers...
edbok

LR supports tethering using a Canon DLL and EOS Utility probably also supports tethering or at least uses something from a similar Canon DLL. You probably cannot have two different versions of that DLL loaded at the same time, so it makes sense there are problems.

How many computers can we run our license for LabVIEW at the same time?

We have LabVIEW 8.2 and we need it to operate on several machines at the same time. How can we do this? Can we check to see if our current license allow us to do this?

Are you talking about developing code on multiple machines or just running programs? If you build your applications into an executable you can deploy those to any machine without buying anything else. If you need the full development environment on each machine but will not be doing development on them look for something called a Debug License.
=====================
LabVIEW 2012

Can you run Boot Camp and Fusion at the same time?

Hi,
I had boot camp installed on my mac pro and loved it. I decided to get greedy and install Fusion using the boot camp partition. The Fusion install went ok but then Microsoft started to get fussy. Every time I would do something on Fusion it would ask me to "Re-activate Windows" when I logged into boot camp. Maybe if I saw Fusion fully working I wouldn't want to run boot camp any more but I think I want to have the option to run either. Right now I only have 1 gig real memory on my mac pro and Fusion seems a little slow compared to native boot camp. Can I run both boot camp and fusion without having to buy two native copies of Windows XP pro? I don't want a "sensible" answer, I want an answer that takes into account how Microsoft treats this re-activation situation.
I guess Leopard might make this all obsolete, but until then .....
... Flash Gordon

You need to make sure to install VMware Tools into your virtual machine (while booted into Windows via Fusion). Once you do this you shouldn't have to continually activate Windows when going back and forth from Boot Camp to Fusion. I've seen this discussed over on the VMware Fusion discussion boards, so you may want to look there for more details.
Also, if Windows starts telling you it's been activated too many times, you can call Microsoft and they'll give you an alternate activation key. The phone number is listed on the Windows error screen. I had to do it and they were very accommodating. I just told them I was running Windows in a virtual machine, and there were almost no questions asked.
You don't need to buy 2 copies of Windows to run both Boot Camp and VMFusion.

Can MBP run both WiFi and Ethernet connections at same time?

I've been running my mid-2012 MBP via USB and WiFi.
I acquired 8-port 10/100Mbp Switch. Can I run hardware like printers, external HD from MBP via the Ethernet switch and still keep USB connections and WiFi net for other purposes at same time?
(I found USB-ethernet adapters on internet)

Macs and many PCs can keep multiple network connections going. When you look at the list of connections in the Network system preference, the one on top is the primary connection and if you want another network interface to be the primary (like Ethernet) you use Set Service Order to drag it to the top of the list.
But when you do that, I think all services use whatever is primary. What I don't know how to do is make specific applications use specific network interfaces.

E3631A IVI class driver can not enable power supply three channel outputs at same time

Hallo,
with E3631A IVI class driver i am trying to enable all the channels at the same time,The problem is that class driver supports only Channel Switching between three Channel,i find in this Forums this Discussion
http://forums.ni.com/t5/Instrument-Control-GPIB-Serial/E3631A-IVI-class-driver-cannot-enable-power-s...
is it possible to enable all outputs at same time that I modify the source code and recompile the drivers,but it is complicated for me.
Is there a another easy way to solve this problem??
Would appreciate if someone who has worked on it suggest a method appropriately. Thanks!
Note：Labview 2009 sp1

You'll either have to modify yourself, ask the poster in that other thread for it, or use the LabVIEW driver.

Can not connect to printer and internet at the same time

I use my airport to connect to the internet via the ethernet port. Internet was working fine until I connected my printer to airport via its USB port. Now the printer works fine but I can't connect to the internet using the same connection.
I can still connect to the same server using its wireless service, but I have to keep hitting the drop down list in the menu bar to select that connection. Can't I just keep connected to the same connection without having to switch back and forth? I thought these mac products were supposed to be all user friendly... I don't have time for this.

The only way to print and use the internet (or university network) at the same time is to do one of the following:
(1) Connect the printer via USB to your computer.
(2) Connect the AirPort Extreme base station (AEBS) via Ethernet to the university's network and then configure the AEBS to act as a bridge (not sharing a single IP address).
The AEBS can NOT wirelessly join the network.

TP4: can not run application with ODBC-JDBC bridge

Hi,
I tried to connect to a oracle 10gR1 Database via ODBC-JDBC bridge.
Test connection in dialog "Edit Database Connection" is sucessfull.
When trying to run the application following error occures:
===========================================
08/05/09 11:48:57 SCHWERWIEGEND: AbstractInfo.getAnnotation oracle.webservices.annotations.async.AsyncWebService cannot be found in the given classpath.
08/05/09 11:48:57 SCHWERWIEGEND: AbstractInfo.getAnnotation oracle.webservices.annotations.async.AsyncWebService cannot be found in the given classpath.
09.05.2008 11:48:58 oracle.j2ee.util.AnnotatedLogger logWithThrowable
SCHWERWIEGEND: J2EE JCA-07001
oracle.oc4j.sql.DataSourceException: Unable to create: sun.jdbc.odbc.JdbcOdbcDriver
     at oracle.oc4j.sql.config.DataSourceConfigUtils.createDataSource(DataSourceConfigUtils.java:403)
     at oracle.oc4j.sql.DataSourceUtils.createDataSource(DataSourceUtils.java:288)
     at com.evermind.server.DataSources.createNativeDataSource(DataSources.java:153)
     at com.evermind.server.DataSources.initDataSources(DataSources.java:1117)
     at com.evermind.server.ApplicationStateRunning.initDataSourceConnector(ApplicationStateRunning.java:1782)
     at com.evermind.server.ApplicationStateRunning.initConnector(ApplicationStateRunning.java:1436)
     at com.evermind.server.ApplicationStateRunning.initConnectors(ApplicationStateRunning.java:422)
     at com.evermind.server.ApplicationStateRunning.initializeApplication(ApplicationStateRunning.java:247)
     at com.evermind.server.Application.setConfig(Application.java:538)
     at com.evermind.server.Application.setConfig(Application.java:433)
     at com.evermind.server.ApplicationServer.addApplication(ApplicationServer.java:2125)
     at com.evermind.server.ApplicationServer.initializeDeployedApplications(ApplicationServer.java:1865)
     at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1235)
     at oracle.oc4j.server.ServerFactory$Worker.start(ApplicationServerFactory.java:249)
     at oracle.oc4j.server.ServerFactory$Worker.run(ApplicationServerFactory.java:259)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.ClassCastException: sun.jdbc.odbc.JdbcOdbcDriver
     at oracle.oc4j.sql.config.DataSourceConfigUtils.createDataSource(DataSourceConfigUtils.java:401)
     ... 15 more
08/05/09 11:48:58 WARNUNG: Application.setConfig Application: current-workspace-app is in failed state as initialization failed.
java.lang.InstantiationException: oracle.oc4j.sql.DataSourceException: Unable to create: sun.jdbc.odbc.JdbcOdbcDriver
     at com.evermind.server.ApplicationStateRunning.initConnector(ApplicationStateRunning.java:1465)
     at com.evermind.server.ApplicationStateRunning.initConnectors(ApplicationStateRunning.java:422)
     at com.evermind.server.ApplicationStateRunning.initializeApplication(ApplicationStateRunning.java:247)
     at com.evermind.server.Application.setConfig(Application.java:538)
     at com.evermind.server.Application.setConfig(Application.java:433)
     at com.evermind.server.ApplicationServer.addApplication(ApplicationServer.java:2125)
     at com.evermind.server.ApplicationServer.initializeDeployedApplications(ApplicationServer.java:1865)
     at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1235)
     at oracle.oc4j.server.ServerFactory$Worker.start(ApplicationServerFactory.java:249)
     at oracle.oc4j.server.ServerFactory$Worker.run(ApplicationServerFactory.java:259)
     at java.lang.Thread.run(Thread.java:595)
Caused by: oracle.oc4j.sql.DataSourceException: Unable to create: sun.jdbc.odbc.JdbcOdbcDriver
     at oracle.oc4j.sql.config.DataSourceConfigUtils.createDataSource(DataSourceConfigUtils.java:403)
     at oracle.oc4j.sql.DataSourceUtils.createDataSource(DataSourceUtils.java:288)
     at com.evermind.server.DataSources.createNativeDataSource(DataSources.java:153)
     at com.evermind.server.DataSources.initDataSources(DataSources.java:1117)
     at com.evermind.server.ApplicationStateRunning.initDataSourceConnector(ApplicationStateRunning.java:1782)
     at com.evermind.server.ApplicationStateRunning.initConnector(ApplicationStateRunning.java:1436)
     ... 10 more
Caused by: java.lang.ClassCastException: sun.jdbc.odbc.JdbcOdbcDriver
     at oracle.oc4j.sql.config.DataSourceConfigUtils.createDataSource(DataSourceConfigUtils.java:401)
     ... 15 more
09.05.2008 11:48:58 com.evermind.server.ServerMessages severe
SCHWERWIEGEND: Exception beim Initialisieren der bereitgestellten Anwendung: current-workspace-app. Application: current-workspace-app is in failed state as initialization failed
java.lang.InstantiationException: Application: current-workspace-app is in failed state as initialization failed
     at com.evermind.server.Application.setConfig(Application.java:636)
     at com.evermind.server.Application.setConfig(Application.java:433)
     at com.evermind.server.ApplicationServer.addApplication(ApplicationServer.java:2125)
     at com.evermind.server.ApplicationServer.initializeDeployedApplications(ApplicationServer.java:1865)
     at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1235)
     at oracle.oc4j.server.ServerFactory$Worker.start(ApplicationServerFactory.java:249)
     at oracle.oc4j.server.ServerFactory$Worker.run(ApplicationServerFactory.java:259)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.InstantiationException: oracle.oc4j.sql.DataSourceException: Unable to create: sun.jdbc.odbc.JdbcOdbcDriver
     at com.evermind.server.ApplicationStateRunning.initConnector(ApplicationStateRunning.java:1465)
     at com.evermind.server.ApplicationStateRunning.initConnectors(ApplicationStateRunning.java:422)
     at com.evermind.server.ApplicationStateRunning.initializeApplication(ApplicationStateRunning.java:247)
     at com.evermind.server.Application.setConfig(Application.java:538)
     ... 7 more
Caused by: oracle.oc4j.sql.DataSourceException: Unable to create: sun.jdbc.odbc.JdbcOdbcDriver
     at oracle.oc4j.sql.config.DataSourceConfigUtils.createDataSource(DataSourceConfigUtils.java:403)
     at oracle.oc4j.sql.DataSourceUtils.createDataSource(DataSourceUtils.java:288)
     at com.evermind.server.DataSources.createNativeDataSource(DataSources.java:153)
     at com.evermind.server.DataSources.initDataSources(DataSources.java:1117)
     at com.evermind.server.ApplicationStateRunning.initDataSourceConnector(ApplicationStateRunning.java:1782)
     at com.evermind.server.ApplicationStateRunning.initConnector(ApplicationStateRunning.java:1436)
     ... 10 more
Caused by: java.lang.ClassCastException: sun.jdbc.odbc.JdbcOdbcDriver
     at oracle.oc4j.sql.config.DataSourceConfigUtils.createDataSource(DataSourceConfigUtils.java:401)
     ... 15 more
09.05.2008 11:48:58 oracle.j2ee.util.AnnotatedLogger logWithThrowable
WARNUNG: J2EE JNDI-00002
09.05.2008 11:48:58 oracle.j2ee.util.AnnotatedLogger log
WARNUNG: Kein javax.jms.ConnectionFactory in null gefunden
09.05.2008 11:49:01 com.evermind.server.http.HttpMessages internalErrorWhileTryingToInstantiate
SCHWERWIEGEND: Interner Fehler ausgelöst beim Versuch, die Web-Anwendung zu instanziieren: GoodsReceipt-ViewController-webapp definiert in Website Default Web Site. Application: current-workspace-app does not exist. Error creating Web application: GoodsReceipt-ViewController-webapp
Ready message received from Oc4jNotifier.
Embedded OC4J Server startup time: 12375 ms.
=========================================
OC4J is up and running, but browser gives error message (404 Not found)
With JDBC connection this application works fine.
Here my jdev specific environment variables:
SET JOH=c:\software\Oracle_JDEV11gP4
SET JDEV_USER_DIR=c:\jdeveloper\home
SET JAVA_HOME=c:\software\Oracle_JDEV11gP4\jdk\bin
Can anybody help me?
br
Peter

Peter --
Can you please describe your use case? The JDBC-ODBC bridge driver is not all that reliable. Sun considers it "transitional" and it is not supported by them.
http://java.sun.com/j2se/1.5.0/docs/guide/jdbc/bridge.html
We still include the driver in JDev primarily to allow connections to MS datasources like Excel and Access that don't have free/open-source pure JDBC drivers. Why would you use the JDBC-ODBC bridge to connect to an Oracle database?
-- Brian

Can I run a sub vi multiply at a same time?

I'm a newbie.
My VI has three buttons and those buttons are connected a sub VI of same
names.
I found that pressing a button invokes the sub-VI correctly, but pressing
another button doesnt open the panel of sub VI (same name as opened one)
while the previously opened sub-VI is running. After closing the previous
sub-VI, it is pened again corresponding to second button press.
Can I open two or more front panel simultaneously from one sub-VI, i.e.
pressing a key opens a front panel regardless of previously opened sub-VI
with same name.
Regards,
Byungin Bae
email : [email protected]

Byungin Bae wrote:
> I'm a newbie.
> My VI has three buttons and those buttons are connected a sub VI of same
> names.
> I found that pressing a button invokes the sub-VI correctly, but pressing
> another button doesnt open the panel of sub VI (same name as opened one)
> while the previously opened sub-VI is running. After closing the previous
> sub-VI, it is pened again corresponding to second button press.
> Can I open two or more front panel simultaneously from one sub-VI, i.e.
> pressing a key opens a front panel regardless of previously opened sub-VI
> with same name.
> Regards,
>
> Byungin Bae
> email : [email protected]
In a word, No.
You can make the VI reentrant (multiple copies) BUT it will not
display it'
s panel at all.
To do this go to the VI setup (right click on the Icon) and Select
Reentrant From the Execution Menu.
If you want to DISPLAY the fronty panel then you must make multiple copies.
This can be done either statically (using file->save a copy as) or
dynamically
using the VI server.
In either case they will not share data unless you make some provision to do
so.
Hope this is less confusing than it sounds.
Kevin Kent

I can not run firefox with old northern utility at same time

Similar Messages

Maybe you are looking for