I can not safe changes of preferences in Mail or Adressbook
Hello,
I am using Lion on a MB pro. All Software is up to date. There are two users installed - both with admin rights.
The one I am using everything is fine. Today my wife changed on her account some preferences in Mail, but she
wasn't able to safe those changes. There appeared an error messages that maybe the right at library/prefrendes are
not ok. When we try to change preferences in other programs it is equal. Never before we had a problem like this!
So first I looked up the rights via finder. No visible problem. Nevertheless I repaired all the rights after restart from the recovery volume,
even the rights of the user folders. BUT PROBLEM STILL REMAINS.
Is there anybody who has an idea or must I create a new user?
Thank you for your help.
M
Do you have Adblock Plus installed? If you do, disable on the page where you normally see your stock info. I've uploaded an image of what happens on another site where ABP is enabled. The Global News image disappears with ABP enabled even though it's not an ad.
If that doesn't work, try running Firefox in [[Safe Mode]]. If it works correctly in that configuration, then one of your add-ons is the culprit.
Similar Messages
-
Since purchasing my Mac Pro with retina display, I can no longer change the preferences on MP Navigator for Canon MX870. I can change them on my old Mac Pro with Lion, but not the new one. I can scan but I can't save it to a folder on my hard drive. I can only let it default to a back up date folder. Tried all sorts of things to change the preferences and folders, nothing worked. Ideas?
StephanieTo prevent your iPhone from automatically syncing when you plug it in, click on iTunes in the menu bar, then preferences, then "devices", then tick "prevent iPhones, iPad's and iPod's from syncing automatically".
Plug it in, then on the iPhone sync summary screen, click "info" along the top.
Make sure the "sync contacts" option is not ticked. as long as it's not ticked, then it won't sync with your mac's contacts but will still include them in backups.
Also, if you use iCloud, make sure that the iPhone/mac are either not signed into the same account, or that "contacts" is not turned on for both of them -
Base unit of measure can not be changed since EAN is already assigned.
Hi,
We would like to change the UOM from EA to SET .In order to tag MM # as BOM Header and ZCEN (Serial number profile)but the error massage appears as below print screensystem is not allowing to do so ,throwing following error message:
"Base unit of measure can not be changed since EAN is already assigned."
Could you help to resolve the same.
Thanks,
AmitHi,
Thats correct you must be getting Error message M3 341 ,
EAN international article number is tied with material number in basic data view with EAN Category and seperate number range
EAN is a standardized unit that uniquely identifies a material relating to a unit of measure or type of packaging.
The International Article Number (EAN) is assigned by the manufacturer of the material. In this case, the EAN identifies the
manufacturer uniquely. A company can assign EANs using "in-store" numbering techniques known only to the company.
If you still want to change UOM you need to first remove the EAN assigned..please explore further if you have internal number range
for EAN or external ..etc
Thanks
Diwakar -
I am trying to invite one person to an event. I click the plus sign create the event and add my one attendee. However, when I go to complete it the attendee is no where to be found and I get a pop up box that's says "attendee can not be changed". I didn't change the attendee. The names was pulled from the address book with no problem. I do notice when I go to change my calendar that the attendee line seems to disappear. Help? I am using iCloud with Mac book Pro, ipad2 and iPhone.
Connect to iTune and "Check for Update" (tap to enalrge image)
-
I have one folder on an XSAN that one machine can not make changes to. Whenever I try to duplicate or copy a file in this folder I get 'The operation can’t be completed because an unexpected error occurred (error code -50).'
The permissions are fine, and I have trashed the finder plist and reset the NVRAM.
Anyone have a answer?
ThanksTips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
- make sure you have at least 10% of your harddisk in free space (I had only 5%).
- do a PRAM-reset (http://support.apple.com/kb/ht1379)
- perform a hardware test (http://support.apple.com/kb/HT1509)
- make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
- after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
So far I only cleared up some space on my HD, and already the problem occurs less.
Still, I will go through the other tips too.
(will post progress) -
The audio file can not be changed! - help
I really need help. I just installed Logic Express 8, and I tried to import a song in order to edit it (as a lead in music bed for a podcast). Every song I import in says I am unable to edit it - "The audio file can not be changed! Volume or file is locked."
How do I unlock the file/volume in order to edit t? This is the only reason why I purchased Logic and if I cannot do this I spent a lot of money for no reason. Please help.OK, basics first..
if the audio was 'bought' from itunes or some other download, it could have some kind of 'digital rights management' (DRM) on it. So you won't be able to edit anything, it's protected. Nothing you can do there.
Also make sure it isn't already open in another application that might be 'holding on' to it.
However, it could be something simple to do with protections on the file itself.
Locate the music file you imported on your harddisk click on it once so it is highlighted, now press cmd-i, or select file menu and 'get info'.
There are some settings here where one can 'lock' a file. There is a check box under the 'general' section that needs to be unchecked, there is also a 'permissions' section at the bottom of the 'info' window of the file.
Make sure you have read and write permissions. -
Pr's Generated by PM Orders Can not be Change
The PR's generated by PM can Not be change or be used for a quotation. Does anybody Know anything about it.
Please if somebody can help me I will appreciate it.
Regards FernandoHi,
PR generated from PM orders can be changed only via PM order. Some one has to do the changes in PM order which will reflect in PR automatically.
Enjoy SAP .
Dont forget to give points if it useful ans.
Namskar,
Ketan Dave -
When I create a rectangle, I can not to change the shape of a rectangle with the cursor in illustrator CC 2014 For what?
Xavigarcia,
I am afraid you have come across the Live Rectangle bug which is limited to the MAC versions starting with 10.7 and 10.8, but not 10.9 (Mavericks) or 10.10 (Yosemite). Hopefully, the bug will be fixed soon.
So a switch to Mavericks or Yosemite with a reinstallation might be the way to solve it here and now.
To get round it in each case, it is possible to Expand the Live Rectangles to get normal old fashioned rectangles, or to Pathfinder>Unite, or to use the Scale Tool or the Free Transform Tool.
A more permanent way round that is to create normal old fashioned rectangles, after running the free script created by Pawel, see this thread with download link:
https://forums.adobe.com/thread/1587587 -
the songs on the iPod on Itunes are grey and can not be changed while in the library are ok, what happen?
Connect the device to your computer.
Open iTunes.
Select iPhone, iPad, or iPod in the Devices list.
Click the Summary tab and select "Manually manage music and videos".
Click Apply.
Even when you have enabled manual management, you can still sync some content automatically. Select any content tab, such as Video, to enable automatic syncing for that type of content. -
Why I Can not Open a safari preferences,
Why I Can not Open a safari preferences,
I not even able to write a web address. My home page is aol I have to search to be able to open a web page
everything starts after I Update my computer to OX X Yosemite
Can Someone help meLaunch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take the action that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
A few days ago I tried to e-mail a friend, when I started A box came up and it required me to add a plugin..Java. I contacted my e-mail courier and microsoft, they told me that is was a plugin from Mozilla Firefox. Since then I must go through Java to send or open an e-mail... this is NOT to my satisfaction, it takes too long for all of this to open and if it is not cleared , I am dropping Mozilla and going elsewhere. Why has this occurred? Is this a result of the last update? If so can I delete the last update and continue on the other version?
== This happened ==
Every time Firefox opened
== last weekSorry, I have no idea what you mean by '''"The Java plugin has created a time unfriendly issue with my e-mail account, I can not open or send any e-mail without using this plugin,"'''.
If you think your problem is caused by the Java plugin, you should visit the Java support forum for assistance.
http://forum.java.sun.com/index.jspa
If you could explain what you mean by '''"time unfriendly''' issue with my e-mail account", maybe we'll be able to help you solve that issue.
It might be helpful for us if we knew exactly which web-mail provider you are using. It seems strange to me that viewing or sending web-mail would actually "need" Java for operation, its more likely that some other item on the web page needs Java to run some advertising or other garbage that isn't a necessary part of the web-mail functionality you want to use. -
I cannot open my Yahoo Mail but everything else is OK. When I click Yahoo Mail Icon, I get this error message "Safari Cannot open this page. Safari can not establish secure connection with Yahoo Mail.
It sounds as though a script on the site, or an advertisement, is not working quite right...
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
(You also can clear Firefox's cache completely using:
orange Firefox button ''or'' Tools menu > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now")
(2) Remove the site's cookies using either of these. Save any pending work first.
While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
Then try reloading the page. Does that help? -
Mail does not save changes to Preferences Accounts upon quitting
When I upgraded to Mavericks, I encountered two problems with Mail. They may actually be one problem, but I can't tell.
The first, broader, and more concerning problem is that when I make a change to any account in Preferences > Accounts and then I quit and relaunch Mail, the change that I made is not preserved.
The second and narrower problem is that I have two iCloud accounts that I cannot delete even though I have deselected Mail from my iCloud account in iCloud preferences. When I attempt to delete these accounts, I get this error message:
The account could not be removed
Account removal failed with error: “The operation couldn’t be completed. Unable to find an account for the UID given.”.
You can try deleting the account from the “Internet Accounts“ preference pane in System Preferences.
There is more detail to this second problem that can be found at this discussion.Same problem … since upgrading to 10.9.4 … every time I restart Mail all the changes to Preferences are ignored and I have to redo.
Checked ~/Library/Mail/V2 folder and it showed I had read/write access … just to make sure I "changed all enclosed files" to read/write for my userid.
No worked ...
Any other suggestions??
Very frustrating!! -
I was trying to make an alias of "SAFARI" icon to have on the desktop & in the dock as well, I managed to make the safari icon appear on the desktop, but when I wanted to switch from firefox to safari it wouldn't open / start safari, so OK, no big deal, I moved it the trash, ( by rt. click,>move to trash>click ) the horror starts here, everything on the desktop disappeared into the trash !!!!! ......
So I have tried to "drag & drop", "alias", "copy", "duplicate" to get things back out of the trash, but every attempt is met with a message "the desktop con not be changed", and whatever I try to bring anything out of the trash window, it gets a "minus - sign" added to it when it crosses over the edge of the trash window, and of course it jumps right back into the trash when the mouse button is released.
I think (barely) I will need the do a "clean install", or a "restore" from the install DVD to restore / get the desktop back.
And while the only thing on the desktop now is the HDD icon, clicking it open does not show the desktop in the Lf. column of the window where it should be, or any OS X folders when clicking on anything, but the OS is is running for this post and yahoo, etc., and there is a upward facing arrow next to the "network" name in the left column, that doesn't go away, like after installing some software, this is weird !!
Any solid ideas welcomed, and Thanks for reading my driveling post, ..... wayne146 .........
this is happening on my back-up machine, a G4 400mhz PCI, OS X TIGER 10.4.11 & 9.2.2 in classic ( all the 9.2.2 stuff does still show in the hdd when clicked )
I am having bigger troubles with my QS 800 dp, so I need this one to stay online, Please help !!!to safari it wouldn't open / start safari, so OK, no big deal, I moved it the trash, ( by rt. click,>move to trash>click ) the horror starts here, everything on the desktop disappeared into the trash !!!!!
I am confused by what you did.
open / start safari
What did you do? This looks like a terminal command.
Or, did you click on the safari icon then right click on the safari icon then click on open?
I do not understand how you that moving to the trash would be helpful.
I suspect disk corruptions.
I run disk utility verify the file system on your starup disk. See below.
verify & repair your startup drive
To verify & repair you file system on the startup drive, you will need to run disk utility from you installation DVD.
This article will tell you how to get to disk utility. Once in a disk utility, you can go and attempt to recover the disk.
http://support.apple.com/kb/TS1417
To repair your startup drive, you will need to run disk utility from your startup DVD.
Mac OS X 10.4: About the utilities available on the Mac OS X 10.4 Install DVD
http://support.apple.com/kb/HT2055
How to run disk utility from your startup DVD.
Insert your startup DVD into your reader. Power down your machine. Hold down to the c key. Power on your machine. This will bootup your startup DVD.
This will bring you to a panel asking you for your language. Pick your language.
You you come to the Install Mac OS panel. Do not install.
Click on Utilities menu item. This will give you a pulldown list of utilities.
Click on the disk utility.
You are now in disk utility. Pick your disk. Click on repair it should be on the lower right of the panel.
Once the repair completes successfully, you should update your permissions.
Verify a disk
As an alternative, you can verify that the filesystem on the disk is correct. You will not be able to repair the file system.
I suggest that you use disk utility to verify that your startup disk is OK. Macintosh-HD -> Applications -> Utilities -> Disk Utility Start up disk utility. On the left pane view, you will see a list of all your disks. click on your startup disk. Click on the First Aid Tab. Click on verify. Hopefully your disk will verify. If not, you have to boot from your installation DVD and run Disk First Aid from there to attempt to repair your file-system. -
Condition type value can not be changed in PO pricing
I have created PO which is having pricing procedure consisting different condition type. When i create any subsequent document (MIGO or MIRO) and realized that condition value in the pricing need to be changed so I have reversed all subsequent document so that can carry out "update pricing".
when i press Update pricing button on the condition tab, its showing message that new pricing can not be carried out. I observed that some condition types of pricing are grayed out.
Kindly help to solve this problem. Kindly help me how to 1) update pricing or 2) can change value of condition type.
answers will be rewardedHi shiwanshu
Actually i tried the same and could change after I have reversed all subsequent documents
Since your system does't allow you change and since you have reversed all the subsequent docs why dont you delete the PO item and add a new one with right pricing..
i guess it will solve your problem..
Hope helps
Best Regards
Reward please if found useful
Maybe you are looking for
-
I have an ipod Touch which i use with all my apps.. paid and free and im going to get the iphone soon.. Am I able to transfer all my Ipod Touch apps to the Iphone? Thanks A very excited Rob
-
It showed a number of apps to be updated on my iPad, so I clicked 'update all' as usual. It started, then the screen went white. The icons for the apps on the desktop went black, as they do, with the first one half way around the little circle time
-
How to find out Mapping Loading type using db query
Is there a way to find out mapping loading type using a database query. Is there a table in database which stores loading type information? Thanks, Niranjan
-
Create Text Files as Unicode in SAP 4.5
Hi Experts Is there any way to generate generate/save text files in SAP 4.5? Thanks
-
I invited 18 participants as co-authors on a document. Originally, all of their names appeared in the share bar. However, now there are only 5 co-authors showing up. These five have opened the document in the interim 2 weeks; the others have not. Doe