I can not see incoming calls after LOLLIPOP update

Hi. When i get a call i cannot see screen, who is calling. It is necessary when phone is locked. Colud you help me?

You may need to perform a software repair using PC Companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 60% battery.
Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable. If PC companion does not start the repair process, you might need to run it in compatibility mode with Windows 7 (in some cases XP).
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Similar Messages

Xperia Z1 can not send/receive MMS after Lollipop update

Xperia Z1 can not send/receive MMS after Lollipop update, is anyone else having this issue. Any ideas on what I can do to restore MMS?

MMS need a data plan, there are certain carriers/networks that allow MMS to be sent w/o a data plan to their branded/locked phones, you will have to contact your carrier/network regarding this.
Is your phone braded or was it branded? did you flashed lollipop ?
@KMcFarlane
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Can not see incoming calls, like I could in PC Sui...

Hi,
I had PCSuite (latest version off the web-update features) installed, I decided to click on the OVI Suite installation ...
I DL and Installed just fine, after useing the OVI suite and getting used to it i find that I am missing the "online" freatures, like incoming SMS and specially incoming calls are not shown any more.
I have E66 connected via USB in PCsuite mode, and compared to the PCSuite I could right away, before the phone even rang, see a pop-up on the screen, telling me that a incoming call is there.
I liked that feature, as you could click SMS, hangup etc .
How do I get the same feature in the "new" OVI suite ??

This is solved in release 2.0.2.42

I can't see incoming calls since update when I'm on the phone

I can't see incoming calls since the update when I'm on the phone with someone. The calls don't show up in my recent as missed either.

I went through the steps as suggested.
Until someone calls through, I won't know if my swap icon appears, and I can see who my incoming caller is. I'll let you know when that happens.
Geez, I have a 4 not a 5, no wonder my phone did not appear up to date!

HT4623 I phone 5s with 7.0.4 software I can not see the caller ID while on the phone for call waiting.

I phone 5s with 7.0.4 software I can not see the caller ID while on the phone for call waiting. Any help???

The following may help: http://support.apple.com/kb/TS4268

Asterisk not seeing incoming calls

I have Skype Connect set up and an asterisk box set up to use it. I can succesfully call out from asterisk, but I do not see any incoming calls on the number assigned to my Skype Connect Profile. If I call the number it rings a few times then gives a busy signal.
Here is my sip.conf:
[general]
context=from-skype ; Default context for incoming calls
allowoverlap=no ; Disable overlap dialing support. (Default is yes)
udpbindaddr=0.0.0.0 ; IP address to bind UDP listen socket to (0.0.0.0 binds to all)
bindport=5060
bindaddr=0.0.0.0
tcpenable=yes ; Enable server for incoming TCP connections (default is no)
tcpbindaddr=0.0.0.0 ; IP address for TCP server to bind to (0.0.0.0 binds to all interfaces)
srvlookup=yes ; Enable DNS SRV lookups on outbound calls
notifyhold = yes ; Notify subscriptions on HOLD state (default: no)
sendrpid=yes
register => 9905XXXXXXXX:[email protected]/9905XXXXXXXX
[skype]
type=peer
context=from-skype
username=9905XXXXXXXX
secret=Redacted
canreinvite=no
insecure=port,invite
dtmfmode=rfc2833
host=sip.skype.com
realm=sip.skype.com
nat=yes
qualify=yes
fromuser=9905XXXXXXXX
fromdomain=sip.skype.com
disallow=all
allow=g729
allow=ulaw
allow=alaw
trustrpid=no
sendrpid=yes
[1001]
type=friend
callerid=1001
canrevinite=no
dtmfmode=rfc2833
mailbox=1001
disallow=all
allow=ulaw
transport=udp
secret=password
host=dynamic
context=default
And my extensions.conf
[general]
static=yes
writeprotect=no
[globals]
TRUNK=Skype
[default]
[from-skype]
exten=>9905XXXXXXXXXX,Noop(${CALLERID(name)} , ${CALLERID(num)})
exten=>9905XXXXXXXXXX,n,Dial(SIP/1001,30,t,r)
exten=>9905XXXXXXXXXX,n,voicemail(100|u)
exten=>281203XXXX,Noop(${CALLERID(name)} , ${CALLERID(num)})
exten=>281203XXXX,n,Dial(SIP/1001,30,t,r)
exten=>281203XXXX,n,voicemail(100|u)
The last 3 lines were my best guess at how to tell it what the incoming call phone # is and I'm not sure it's entirely necessary. Any thoughts?

Dear MRLindstrom,
I am sorry to hear that you are having issues receiving incoming calls to your Skype Connect Online number.
In looking at your Asterisk configuration, I would suggest changing your 'incoming call field' (the last 3 lines you have included below) to your 9905xxxxxxxxxx, rather than 281203xxxx.
Please make that change and let us know if you are able to receive calls.
Thank you,
MariaA
Skype Enterprise Support

Bought a new phone and now we can not receive incoming calls

This week I bought a new Panasonic cordless handset with no answering machine to replace our AT&T desk phone. I set it all up and waited the 7 hours for it to charge. Checked for dial tone, ringer, and volume. Called the house # from my cell phone and the screen on the Panasonic never showed an incoming call - kicked into voice mail (provided by Verizon) after the preset 5 rings so I left a test message. Panasonic screen showed a "1 new voice mail message". I was able to dial the voice mail access phone # and listen to my test message. Disconnected the new handset and reconnected our old phone - worked just fine. Returned the Panasonic to the store where purchased and exchanged for another (same model). Sales assoc. said there may be a code needed from Verizon. Spent hours on the phone attempting to speak to a real person at the customer service # and decided none work there anymore - everything was automated! After "4 digit pin" frustrations I gave up!
So if you've read this far and can help I'd sure appreciate it! Line works fine, old phone works fine, checked ringer/volume on new phone. Only working phone jack in the house (used to have 2 but when we contracted with V last year they only changed over one - another frustration). And how can I find out when our contract is up?!?

Your mostly talking to peers here. Better off using the
http://www22.verizon.com/support/residential/contact-us/index.htm
option which is on all the Verizon pages. Should always lead you to phone numbers (1-800-verizon) and often an online chat. Sometimes will show you and email option.
As far as peers helping we would need to know what type phone service and general area of the country. Obviously varies as I have had no trouble with panasonic, uniden and other phones at my two locations (NY and FL).

Can not see cFP-2220 after creating an exe file

I am using a cFP-2220 with LabView 2011. I can see the cFP-2220 with Max, the program I created runs in my PC but the data from the cFP-2220 it is slow to up date.
I access the cFP-2220 thru the network terminal and a net card in my PC.
I have created an EXE file to run in the PC for that test stand as a stand along program. The program runs but it does not see the cFP-2220 or any of the data been collected. The test stand PC does have MAX install. When I run MAX in the stand PC it sees the cFP-2220 and can read the data from the modules the PC is wire to the cFP-2220 thru a net card.

Sorry for the delay to respond... I do have installed the minimun files that are available Field Piont 6.0.10 and LabView RT 11 is part of them.
I also using share variables. The program VI runs fine in my PC but when I create the exe file and deploy on the test stand it asks fot the location of the FPLV,dll and the NI_TGT.dll and it can not read or write to any of the DAQmx vi's.
I accidently remove one my FP-SG-140 from the list of inputs, I did put it back but I damage how the share variables weere working I am getting and error -1950679023 and it does not see any of my inputs.
I have another question how do I down load the variables to the cFP-2220 that is another erros that shows up when I installed other files into the cFP.

Can't see incoming calls while on a call...

While on the phone, if a call comes in, im unable to see it. However it does beep indicating there is an incoming call. Why is that? Please help!!!!!

go to Settings- General- Reset- Reset Network Settings it will reboot the phone and it should be working from there. I have an iPhone 4s with Verizon and that did the trick.

Bluetooth no longer works for incoming calls after recent update

When I updated my Bluetooth to iOS 6, the Bluetooth no longer works for incoming calls. I press button to answer call, it makes a small cracking noise, and then sends the call to my phone. I can use the Bluetooth for outgoing calls and it works just fine. I was hoping when I updated to iOS 6.0.1 that the problem would be fixed. I have uninstalled and reinstalled Bluetooth but that has not helped either. I am frustrated. I have a LG HBM-905 Bluetooth that I loved prior to this problem.

Magically started working today after I synced.
Post relates to: Treo 700w (Verizon)

Bluetooth connectivity and beeping during calls after lollipop update

After this update I have had problems with the bluetooth audio cutting out. Also during calls a strange beeping sound can be heard every minute. Is anyone else having this issue?

Couple of other ideas looking around on the web, try hardwired headphones and see if the problem does indeed go away (narrows it down to bluetooth only), if you are playing back from sd card try moving to phone to see if that solves it (some people have seen similar issues with failing micro sd cards). You aren't by chance getting notifications when the drop outs happen? It could be muting the audio to playback notification but not playing back the notification (just a thought). Try different apps for playback assuming you are listening to music.
BTW how do you like the Gear circle (other than the cutout issue)?

Can not print from preview after Lion Update

I can't print from preview since I updated to Lion. After I hit command P or select print from the file tab preview totally freezes up and gives me the spinning wheel of death until I force quit preview. I have no issues printing from anything else, such as word, excel, web pages. So I don't think it's a printer/driver error. Help?

I would still mention what printer you have and make sure you have the latest printer driver.

I can not syn whit Ical after the update now De server reageerde met 'HTTP/1.1 409 Conflict'

I have problems with iCal sync after the update, reporting gebruikesnaam orpassword are not good while I wait for this place and use mobileme name will becoming, I now get the message The server responded with
"HTTP/1.1 409 Conflict" what should I do if the agenda does not 3 weeks.

wimfromde meern,
Read the "Troubleshooting iCal" link in MobileMe: Troubleshooting new MobileMe Calendar issues.
Let us know what happens.

Can't see incoming caller's name

In my outgoing calls list I can see phone number and person's name (taken from contacts), but in incoming one there is only phone numbers
Is there any option to turn on showing contact name?

do your contacts use phone number only or also name and surname labels? you can had as many info to any number as you like - from nickname to email or even adress, within that contact editing menu...
the other reason of incoming number not appearing may be that the caller wants to be anomymous and blocks his ID cell info and usualy appearing as "unknown" on your screen.
My baby E61i was stolen from me !!!

No sound on voice calls after Lollipop update

I recently upgraded my Xperia T2 Ultra to Lollipop. Since then, when I call anyone, or they call me I have no sound coming from the built-in earpiece speaker. I have the volume all the way up, but nothing. If I change it to speakerphone mode I can hear the other party, but I do not want to have to use speakerphone all the time. Has anyone else encountered this problem? Found any solutions?

Reinstall lollipop with PCC PC Companion (PCC) Bridge (for Mac) Alternatives on How to backup Xperias http://talk.sonymobile.com/thread/36355

I can not see incoming calls after LOLLIPOP update

Similar Messages

Maybe you are looking for