I can not see my apple tv on my mac any more

I have had my apple tv hooked to my router via e cable. I have had the icon on my tool bar in the upper right hand corner but its gone...  i unhooked the cables and the apple tv and computer are both on the same wifi network but i have no icon to be able to send my computer screen to my tv..  i also just checked and the icon is gone from my ipad???

Is the ATV actually connected to the same network?  Do not assume, confirm.
Power cycle the router.

Similar Messages

  • TS1741 I can not see my Apple TV in my device option in remote

    I can not see my Apple TV in my device option in remote

    Read the article from which the thread was started and follow the troubleshooting steps provided.

  • Can not see shared PC computers on my mac or my mac on my shared computers!

    So i have a home network setup and i have my storage computer that can see my other computers and my xbox 360 but i can not for the life of me get my mac to connect to the home network and see the other computers nor can the other computers see my mac!!! what do i do for the love of god help!!!

    Ya I'm having the same problem, I cannot see my windows shared folders on my mac, and I was able to before I installed leopard. With Tiger it worked just fine. I've tried a fresh install and it still wont see it.

  • Can't see photos copied over from old mac - any ideas?

    I copied my photo library over from my old mac (same method as I used for my iTunes library, which worked) to my new one. I just dragged out the original empty library folder and put the one from the old mac in its place. Non of the photos showed up.
    I figured I would deal with it later and have since added photos from my camera. I am now trying to see the older photos but no luck. My photo library, seen from within iPhoto, has albums for the years listed but without the pictures.
    I did the rebuild but that didn't change anything. I tried importing them but iPhoto tells my I can't import them since they are already in the library.
    Anyone know how to solve this?
    Thanks,
    David

    Do you still have a copy of your original library from the old Mac?
    If so try the following:
    1 - copy it again to the Pictures folder.
    2 - download and run BatChmod on the iPhoto Library folder with the settings shown here, putting your administartive name in the owner and group sections. You can either type in the path to the folder or just drag the folder into that field.
    3 - launch iPhoto with the Option key depressed and select that library folder to open.
    Now see if the album gets converted correctly. You can move your other iPhoto library folders to the desktop temporarily until you see if this procedure is any more successful.
    Also update to 10.4.9 with the COMBO updater and update Quicktime to the latest version, 7.1.5. Of course repair disk permissions afterward with Disk Utility.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Replace old router with WRT110 and now I can not see shared printer on network

    Replaced a BEFW11S4 with a WRT110. Now I can not see a shared printer on the network any more. I have not changed anything on the computer that has the printer shared. I can see the internet on all the computers, but not the shared printer. can you help?

    First which you need to check, is your printer is working Offline on your computer. In this case you need to Re-map your Printer on your Computers back again. First check if you have any Firewall or Antivurs Installed on your computer try to disable it and check if you are able to print from your computer. If not then try to Remap the printer on your computer.
    Go to Network connections window and if you are able to see your computer name on which the printer is installed, then right click on the Printer and click on "Connect" or "MAP" once done you will be able to print from your computer. 
    Note down the IP address of the Computer on which you have Installed the Printer. (Click on Start - Run - CMD and click Ok, now in the command prompt type "ipconfig" and note down the Ip address, Then go to your other computer and Click on Start - Run - CMD and click Ok and now in the Command prompt type "ping (IP address of your main computer) and hit enter and check if you are getting any replies. If yes, then again click on "Start - Run - type ( \\ip address of your main computer) and click Ok, and now you will be able to see your printer name then right click on it and click on "Connect" or Map, once done, now check if you are able to print from your computer. 

  • Wrt160n can not see it as an available network

    I just purchased the WRT160N and followed the setup and was able to connect to the internet with a wired connection. I started my laptop to connect wireless and could not find it as an available network but could see others in the area. I spent 2 hours on the support line with 2 different people and still can not see it or use it wireless. Any ideas?

    You need to adjust the wireless settings/parameters of your router...
    Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
    Leave username blank & in password use admin in lower case...
    For Wireless Settings, please do the following : -
    Click on the Wireless tab-
    -Here select manual configuration...Wireless Network mode should be mixed...
    -Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
    - Set the Radio Band to Standard-20MHz and change the standard channel to 11-2.462GHz...
    - And wireless SSID broadcast should be Enabled and then click on save settings...
    Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
    For Wireless Security : -
    Click on the Sub tab under Wireless > Wireless Security...
    Change the Wireless security mode to WEP, Encryption should be 64 bits.Leave the passphrase blank, don't type in anything...
    Under WEP Key 1 type in any 10 numbers please(numbers only and no letters) and click on save settings...
    Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network.
    Click on Advanced Wireless-
    settings>>Change the Beacon Interval to 75 >>Change the Fragmentation...
    Threshold to 2304 Change the RTS Threshold to 2307 >>Click on "Save Settings"...
    Wait for a minute, Now see if you can locate your Wireless Network and attempt to connect...

  • I have rented a movie on apple tv and wish to finish it on my mac book air. When I open iTunes on my mac book air I can not see the movie in iTunes. It is an authorised device and I can see other purchases just. How do I fix it?

    I have rented a movie on apple tv and wish to finish it on my mac book air. When I open iTunes on my mac book air I can not see the movie in iTunes. It is an authorised device and I can see other purchases just. How do I fix it?

    Rented movies downloaded to an Apple TV can't be transferred to any other device.
    (86941)

  • I have been using my Apple ID in India and recently i moved to Spain and now i can not see my indian apps.it says my apple ID is valid for only spanish store.how to download apps from Indian store being in Spain.

    I have been using my Apple ID in India and recently i moved to Spain and now i can not see my indian apps.it says my apple ID is valid for only spanish store.how to download apps from Indian store being in Spain.

    Did you try to change the location  in Settings/iTunes & AppStore/AppleID -> view Apple ID, log in ->Country/Region -> India?

  • Hi...m using a mac pro quad core.....its not booting up...i can only  see the apple logo and a circle loading...could not get into the login screen

    hi...m using a mac pro quad core.....its not booting up...i can only  see the apple logo and a circle loading...could not get into the login screen...any suggestions please.....m in the middle of a project and now i have got this one
    regards,
    v.s.bharan

    Welcome to Apple Discussions!
    Do you keep your data backed up?
    If not, you should always do so*:
    http://www.macmaps.com/backup.html
    You never know when a hard drive or a directory might go bad.  Having a bootable clone is a must.
    That link also shows you some tools you can use to recover data.
    If you aren't backed up, try buying those tools first, before attempting to repair the directory.
    Directory issues can be fixed with these tools*:
    http://www.macmaps.com/directoryfaq.html

  • Iphone not work i can only see the APPLE NOT WORK, iphone not work i can only see the APPLE NOT WORK

    iphone not work i can only see the APPLE NOT WORK, iphone not work i can only see the APPLE NOT WORK

    First, try to reset by holding the sleep and home button for about 10sec, until the Apple logo comes back again.
    If this does not help, connect in recovery mode and restore, explained in this article: iOS: Unable to update or restore

  • I did a upgrade on my apple tv and alot of the movies that I have on my itunes library I can not see the on apple tv

    I did a upgrade on my apple tv and alot of the movies that I have on my itunes library I can not see the on apple tv

    Movies rented on the Apple TV can only be watched on the Apple TV.
    iTunes Store: Movie rental frequently asked questions (FAQ)

  • HT200197 I have set up my apple ID, my apple TV is connected to my Mac, internet is OK, TV syncing all movies, phones,- ok, but I can not see iTunes store on my apple TV.

    I have set up my apple ID, my apple TV is connected to my Mac, internet is OK, TV syncing all movies, phones,… ok, but I can not see iTunes store on my apple TV. Any suggestions? Thanks

    Thanks, I read several other threads and all it took was to turn off the router and turn it back on again, 'simples'.
    Thanks
    Chris

  • HT4437 Using Mac pro OSX Lion and new purchase of Apple TV - can not see Airplay status icon and can therefore not mirror - Apple TV is seeing router as is the Mac !??

    Have purchased Apple TV.    Set up was OK (saw the wifi router and finalised with getting into itunes - but only purchased items)
    Want to use the Apple TV to view my mac pro screen to use itunes (selection of ANY of my songs) and to display images from my photo folders (mirroring)
    Can not see the 'airplay' icon!!!!??

    Here is a list of requirements for AirPlay Mirroring: http://support.apple.com/kb/ht5404

  • HT1600 I can not see my mac on my apple tv?

    I can not see my mac in the computers icon on my apple tv ? Home sharing is turned on, on both my apple tv and computer as well as ipad and 2 iphones? Any ideas?

    Welcome to the Apple Community.
    The following article(s) may help you.
    Troubleshooting Homesharing

  • Why I can not see any home video or slideshow on my Apple TV?

    Why I can not see any video or slideshow on my Apple TV?

    Can you elaborate on the issue?

Maybe you are looking for