I can not see my CF-6004 device in MAX
Hi,
I have HP IPAQ PocketPC with Windows Mobile 2005, CF-6004
device, PDA 8.0.1 module and I installed DAQmx Base 2.0 on PocketPC. I followed instructions in documentation I get with DAQmx Base 2.0 and PocketPC is correctly conncted to PC.
But I can not see CF-6004 in MAX?!?
I found out somewhere that DAQmx Base support CF-6004 on Pocket PC 2003 OS but I did not found that information for Windows Mobile 2005 OS!
Thanks for help!
Andrej
Hello Andrej,
Devices that use the NI-DAQmx Base driver will not appear with Measurement & Automation Explorer (MAX). Instead, you should use the NI-DAQmx Base Configuration Utility found within LabVIEW under Tools > NI-DAQmx Base Configuration Utility.
Follow the instructions in the following Knowledgebase for loading the correct task list for use with the DAQmx Base shipping examples:
KB 3RRF2088: NI-DAQmx Base Task Configuration Utility Does Not Show PDA DAQ Device
Also, with the new DAQmx Base 2.1, you can now use the CF-6004 Compact Flash Device with the LabVIEW 8.20 PDA Module to target Windows Mobile 5.0 devices.
I hope this helps,
Travis G.
Applicaitons Engineering
National Instruments
www.ni.com/support
Similar Messages
-
I can not see my i phone/device on my i tunes?
I can not see my i ohone/device on my I tunes aftre i upgraded to the new verision
all I want to do is add a playlist to my i phone.Hello Andrej,
Devices that use the NI-DAQmx Base driver will not appear with Measurement & Automation Explorer (MAX). Instead, you should use the NI-DAQmx Base Configuration Utility found within LabVIEW under Tools > NI-DAQmx Base Configuration Utility.
Follow the instructions in the following Knowledgebase for loading the correct task list for use with the DAQmx Base shipping examples:
KB 3RRF2088: NI-DAQmx Base Task Configuration Utility Does Not Show PDA DAQ Device
Also, with the new DAQmx Base 2.1, you can now use the CF-6004 Compact Flash Device with the LabVIEW 8.20 PDA Module to target Windows Mobile 5.0 devices.
I hope this helps,
Travis G.
Applicaitons Engineering
National Instruments
www.ni.com/support -
CFP 1808 can not see software option under tree in MAX
I have configured the cFP 1808 with the correct IP address so that it is recognized by the laptop but when I expand the tree under the Field Point there is no options under it. I need to install Real-Time software but obviously can't if the option is not given to me.
The cFP-180x are just distributed I/O interfaces for ethernet or RS-232. The do not have an on-board host processor to execute an operating system like RT.
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~ -
Can not see the device net Master Interface in my project.
Can not see the device net Master Interface in my existing project. Need to Modify exististing code. Can not recomiple and create exe file after making changes. Error says the vi's are broken. Tried re-installing industrial communications for device net but get an error saying a newer version is already installed. Do I need to plug my computer into the device net scanner to fix this?
Assume the installation disk is an OS X disk? If it's the original one that came with the system (grey-colored disk versus black retail disk) have you tried to hold the alt key down when you boot? This would allow you to choose the Apple hardware test. If you can do this, choose the Apple hardware test, click the arrow to the right, and when prompted choose the extended test. Does that give you any errors or messages about a hardware problem?
Are you able to hold the C key down when you reboot, to boot off the installation disk? -
I have rented a movie on apple tv and wish to finish it on my mac book air. When I open iTunes on my mac book air I can not see the movie in iTunes. It is an authorised device and I can see other purchases just. How do I fix it?
Rented movies downloaded to an Apple TV can't be transferred to any other device.
(86941) -
I am trying to transfer pictures and music from my phone to my computer, and when I connect my phone, it says Device not installed correctly. I can not see my files or nothing. What can I do?
Try downloading these http://www.samsung.com/us/support/owners/product/SCH-I535MBBVZW
or searching for it here Verizon Wireless Cell Phones - Verizon Wireless Accessories | Samsung -
I have the newest version of the iPad and can not see it under devices in my iTunes account on my PC. I can however see my iPod touch under devices and sync it. How can I get my iPad to show under devices and sync as well? I have also tried may suggestions on the apple support site and none have worked. Any suggestions are welcome.
You need iTunes version 11+.
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
Cheers, Tom -
TS1741 I can not see my Apple TV in my device option in remote
I can not see my Apple TV in my device option in remote
Read the article from which the thread was started and follow the troubleshooting steps provided.
-
HT1386 i can not see my iphone as a device in itunes
i can not see my iphone as a device in itunes so can not sync it, please help
See Here > Device Not Recognised > http://support.apple.com/kb/TS1538
-
On my iPod touch I can see my friends on FaceTime but they can not see me it's making me mad someone please help me and I have it on too.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I am trying to update my iPod but I can't until I sync it. However when i try to sync it a message pops up and says "Blythes iPod" can not be synced because a session can not be started with this device. What do I do? Help!
https://support.apple.com/kb/TS1567
Ah, it has been mentioned daily esp since iOS 5 / iTunes 10.5 but has always been there as an issue.
Order of attempts:
Repair the installers
Uninstall EVERY Apple component (auto and manual)
Services: Restart all 3 Apple items (AMS, Bonjour, iPod)
I* always do the last almost, then launch iTunes, and only then connect iPod.
IF you see a yellow alert in Devices and Printers or in Device Manager, then I could find NO WAY to fix or repair other than a clean OS. Something messed up the device driver support.
If/when Windows asks "what to do when it detects iPod"? don't chose any default action, to me, based on hunch and 3 PCs, that seems to mess AMS up for some reason.
Tried with Windows 7 64-bit Pro and Home Premium, and also Deve Preview 8 (which other than the inability to update iOS to 5.0 seems to run better -- except when it comes to AMS thing! so seems Apple is not on the same page writitng drivers. -
Hi having trouble with camera roll photos - can not see them in i tunes
Hi having trouble with camera roll photos - can not see them in i tunes. Is adobe photoshop the only program I can use?
You don't see them in iTunes. In theory your computer should see the device as a camera and you should be able to transfer the photos in the same way as if you'd connected a 'proper' camera to your computer (this only applies to photos taken with the device or saved from emails/websites etc, it doesn't apply to photos that were synced from your computer). There is some help/guidance in this article for transferring photos to your computer : http://support.apple.com/kb/HT4083
-
HT1386 I can not see/find my iPhone within iTunes when I plug it in.
I can not see/find my iPhone within iTunes when I plug it in. I have updated iTunes, and the iPhone. I am running Windows 8, which is the one variable that has changed since I was last able to sync.
DEVICE NOT RECOGNISED IN ITUNES
If you have connected your device to your computer and it does not appear in the side bar in iTunes then for Windows computers read http://support.apple.com/kb/TS1538 or if you have a MAC then read http://support.apple.com/kb/ts1591 for troubleshooting steps. -
HT201656 i am trying to update my iphone 4 to ios 7 but i can not see general then software update
i am trying to update my iphone 4 to ios 7 but i can not see general then software update
Update it as described in this article; devices running an iOS version prior to 5.0 can't be updated straight from the device and must be updated from iTunes on a computer. It will be updated to the newest iOS release supported by the device’s hardware, which is iOS 7.0.4 for an iPhone 4.
(97574) -
I can not see the photos ( Shared Photostream) I have chosen when I post them on my Mac yet I can see them both on my iphone and Ipad.
If I post them on my other devises they do show up on my mac but if I add to them from my Mac they still have a no show on it but in turn they are now on my other devises.
What am I doing wrong please??Rented movies downloaded to an Apple TV can't be transferred to any other device.
(86941)
Maybe you are looking for
-
Error while sending a message 501 not implemented
Hi all, running some tests checking some Xi interfaces we have the following problem : going to Runtime Workbench --> Component Monitoring --> Adapter Engine e clicking on the Tab "Test Message" we insert Service, Interface, Namespace, Quality of Ser
-
I am unable to connect to the itunes store; I get the message 'Itunes could not be connected to the itunes store. An unknown error occured (-3212). Also when I plug my iphone in to the computer it doesn't ever pick it up please help!!
-
"View as Icon" as default?
Is the any way to have attachments displayed as icons as the default in mail? I know I can select images in an email and set them to be display as an icon via the context menu, but that doesn't seem to "stick". Is there any "hidden pref"? TIA, Phil P
-
[SOLVED] Inkscape and python-numpy problem.
When I'm trying to use the perspective tool in Inkscape I'm getting this message. Inkscape has received additional data from the script executed. The script did not return an error, but this may indicate the results will not be as expected. Failed t
-
SQL*Loader-523 error in solaris sh script
I have a SQLLdr script that I want to call from a unix shell (sh) script. We are running on Solaris 8. When we run from the command line the Sqlldr works, when we run from within a shell script, we are getting an STD ERR -2 error. I have tried runnin