I can not see my external hard drive

I recently bought a new external hard drive for my pc. I have pictures, music and family videos, however I can see any video or pictures on my iPad using the same he'd.
Any suggestions how to do it?

hernandofromcornwall wrote:
Richard
I download all pictures and videos that I had in the windows pc in the new hdd. I am trying to see and watch those files on my iPad . I am thinking that since the files are jpeg and mpeg the iPad should read it.
Am I wrong?
Yes, you are wrong.
You need to add the files to iTunes on your computer, then sync the iPad with iTunes.

Similar Messages

I can not see my external hard drive that is hooked to my airport extreme

I have hooked my iOmega 1tb hard drive to my airport extreme but can not see it on my macbook pro. need help to set this up

This is unsupported by Apple. You must configure Airport Utility to turn enable File Sharing of the drive in Sharing preferences and in the AEBS configuration. Then you have to "mount" the drive on your Desktop by selecting Connect To Server from the Finder's Go menu.

I can't see my external hard drive in the event library.

I need to move my Imovie to a external hard drive to free up space.
I can not view the external hard drives in the Event libary of Imovie.
I have formated the hard drive to mac os
PLEASE help urgent

Strange if the drive format is Mac extended (journalled). (see: http://help.apple.com/imovie/#mov3ac6d42c)
Can you can see the external drive in the finder?
Can you read to and write from it with the finder?
Have you tried Trashing the iMovie preferences file and re-launching?
Geoff,

Migration Assistant can't see my external hard drive.

Migration Assistant can't see my external hard drive with my back-up info on it. I need to migrate my user data from an older back-up ( OS X 10.4.11) to a recently installed OS X 10.5.8 system on a Mac Pro. The external drive is not bootable. Any ideas?

Great news, thanks!
On iTunes see this...
http://support.apple.com/kb/HT4527
Expand the External drive section & it's 6 steps.
More info, especially the Wrong Way part...
http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive/

I can't see my external hard drive on the network.

I can't see my external hard drive on the network. I have a WRT160NL router with USB. I plugged the drive in the USB and set up a share in the router config.

Did you map the drive? It won't show up in Explorer automatically like a jump drive or an external drive plugged directly into the PC will.
You didn't mention the OS you're running, but what you want to do is choose "Map a network drive" and you'll see the router listed as a network device. Click on it and you should see the external drive listed. You can map it from there.

I can't see my external hard drive connected to my TC

I can't see my external hard drive connected to my TC, I have connected to the USB port on my TC but cannot see it , any ideas

Hello Bob,
I have a powered hub plugged into my Time Capsule.
Into the powered hub I have a printer; printer works fine.
Into the powered hub I have an ExFAT formatted disk.
The ExFAT disk is seen in the AirPort Utility as an "AirPort Disk".
I cannot see the ExFAT disk in Finder or in Window's "My Computer".
When I plug the ExFAT drive directly into Mac or Windows computers the drive is seen in Finder and My Computer.
When the ExFAT drive is plugged directly into Mac or Windows both can read and write files.
Do you think that I need to format the USB ExFAT drive as FAT 32?
I have heard mention "need to map the drive". Do you think this would help?
Thank you for your time.
Rob

Why can I see my external hard drive?

For 2 years or more I've had an external hrad drive to back up my Imac. One day I got a message that there had not beeb a back up for for a really long time ( I have it on automatic).
Ever since, I have not been able to see the external hard drive on mi Imac and have not been able to do regular back ups.
First I turned off, on, restart computer and tried to see if it showed up on another computer, which it did.
What could the problem be? It was working just fine.
Please help
Thanks

EHD's can crash. First thing I'd recommend though is to do 2-3 SMC resets. Shut down the computer, then remove the power cord from both the wall plug and back of the computer, wait 15-20 seconds and restart normally and test.
If that fails use another cable to connect the drive, if that fails open Disk Utility and see if the EHD can be seen. If that fails then replace the drive. I would STRONGLY recommend 2 backups, use Time Machine on disk 1 and then use a create a clone using either SuperDuper or Carbon Copy Cloner on the other drive. When it comes to backing up, redundancy is smart. Would you trust your bank if they only had one form of backup of all your money??

Time Machine can't see my external hard drive

Time Machine won't show me any backup disk options other than "Set up Time Capsule". When I click on that, it searches for AirPort wireless which I do not have installed. How do I get Time Machine to see my external hard drive connected via Fire Wire? I went into Disk Utility and it showed the external drive was there. Backups had been working previously.

I don't know the answer but I have the same thing happen. I have two external drives I use for backup. Sometimes it can see one and sometimes another. Then sometimes it can't see either one. I will take one out for a while then plug it back in and then it may see it. Maybe it's a cable issue or something but I will be curious to hear what someone more knowledgeable says.

I can not find my external hard drive...

The time machine is not working. How do I find my external hard drive and find my backup files? Perhaps this has to do with the fact that I lost power the other day and my router is not working... A different question.. Is this related?

The external hard drive does not work any longer
Do you mean the Time Capsule? If you are having problems with your Linksys router as you indicate, the Time Capsule will likely not function correctly until the Linksys is working normally.
I am getting into the default setting of linsys.
I think you may mean Linksys. If this device is your main router, everything on the network receives connection information from the Linksys, so this device must be functioning correctly in order for any other devices on the network to work correctly.
I can not get the website to open the 192????????
I'm guessing that you are talking about the Linksys router here, correct? You may need to contact Linksys support as our ability to help on that product is going to be limited to a user who understands Linksys products and happens to see this post.
I think we can help on the Time Capsule. Please post back when you have the Linksys router working correctly and we will work on getting the Time Capsule up and running again on the network.
Besides, I tried to log into this website for forever, it wouldn't let me.
I check the Community Support area mutliple times each day and cannot recall any problems with accessing this area in the recent past. We have not seen any other similar compaints from other users, as would normally be the case if there were a general problem with this site.

Finder can't see my external hard drive

Disk Utility can see external hard drive, but finder not.
Also i cannot mount the external hard drive.
I tried to repair, i can see how many files are there, it was working normally before.
Also when on other computer with windows it's working. In windows I can access all the files normally.
When I bought it first I format this in my mac with fat and then i was using normally long time since now.
This is from disk utility:
Verify and Repair volume “PASEK”Repairing file system.** /dev/rdisk2s1
** Phase 1 - Preparing FAT
** Phase 2 - Checking Directories
** Phase 3 - Checking for Orphan Clusters
64331 files, 247388960 KiB free (7730905 clusters)
File system check exit code is 0.Updating boot support partitions for the volume as required.

So I got this in terminal
MacBook-Pro-Micha:~ michalpasek$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *121.3 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage                         120.5 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Macintosh HD           *120.1 GB   disk1
                                 Logical Volume on disk0s2
                                 B942247B-CD79-4662-AC55-A8F5CB811939
                                 Unlocked Encrypted
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *1.0 TB     disk2
   1:                 DOS_FAT_32 PASEK                   1.0 TB     disk2s1
MacBook-Pro-Micha:~ michalpasek$ diskutil mount /dev/disk2s1
Volume on disk2s1 failed to mount
If the volume is damaged, try the "readOnly" option
MacBook-Pro-Micha:~ michalpasek$ diskutil mount force /dev/disk2s1
Usage:   diskutil mount [readOnly] [-mountPoint Path] DiskIdentifier|DeviceNode
Mount will mount the volume in the "standard" place (/Volumes), unless
an optional mount point is specified.

Icannot get my pcs to see the external hard drive when I attatch it to the usb port of the airport extreme. They do recognize a thumb drive but will not see the external hard drive. What do I need to do. The ext hard drive is a "MY PASSPORT" with no pw

I need assistance getting my windows computers to see my external harddrive attached to the airport extreme. It is a my passport. The disk shows on the airport utilitiy but neither of my pcs can see it. If i connect a simple thumb dirve they see it just fine.
What do i need to do to get this to work. There is no password on the external hard drive at the moment. I tried removing it to see if that would work.

There are a number of posts related to access issues between Windows Vista / 7 and AirPort Disks. Two potential solutions being forwarded are: 1) Changing the LAN Manager authentication level, and/or 2) Disabling the Windows Search feature.
To change the LAN Manager authentication level:
From the Windows Vista / 7 desktop, click Start
Search for: security
Click 'Local Security Policy'
Goto Local Policies > Security Options
Under Policy, double-click 'Network security: LAN Manager authentication level'
Change level to: Send LM & NTLM responses
Under Policy, double-click 'Network security: Minimum session security for NTLM SSP based (including RPC) clients'
De-select 'Require 128-bit encryption'
Click OK
To disable Windows Search:
Start > Control Panel > Programs > Programs & Features
On the right-hand side, click "Turn Windows features on/off"
Scroll down, and de-select "Windows Search".
Press OK, close all windows and restart.
A third "solution," that has worked for me, is verify that both the AirPort base station and the Win7 PC are using the exact same Workgroup Name. In my case, I use "WORKGROUP" (without the quote marks) for this name. From the AirPort Utility, you would enter this value on the Disks > File Sharing tab. On Win7, Start > Control Panel > System and Security > System > Change Settings > Change > Workgroup

My time machine back up error and now it says it can not read my external hard drive

I have a MacBook Pro Yosemite ...... I was backing up to a WD Elements external hard drive disk and I was in mid back up and everything was going fine..... then an error and when I went back to it ..... it said it no longer can read my disk? What can i do?

A whole lot about Time Machine for help with TM problems. Also you can select Mac Help from the Finder's Help menu and search for "time machine" to locate articles on how to use TM. See also Mac 101- Time Machine.
Use Disk Utility to repair the TM drive. If that doesn't help, and you don't find help from the above, then erase the drive and start a new TM backup.

Bridge does not see both external hard drives

In either CS3 or CS4, Bridge does not recognize my second external hard drive. Photoshop and lightroom see both drives. I am using a laptop and Windows xp.
Thanks,
mIKE

Those directories are modified in the User Preferences tab in the Setup Room.
When you've got the file tree dialogue box open, you'll need to point Color to the "Volumes" level, once there, you should see your external drive.

My MacBook pro does not see my external hard drive

I have an external hard drive La Cie (Porsche 250 gb).
Once I disconected it incorrectly.
Since that time it doesen't work
More specifically when I try to work with the hard drive the following message appears:
'Eject; Initialize or ignore'
I also tried to verify the disk with 'Disk Utility' but it doesn't work
Does someone know how I could access to the disk without formatting it?
Thank you
Lorenzo

I also tried to verify the disk with 'Disk Utility' but it doesn't work
I assume that mean your can "see" the external from DU? Normally, if DU can see the disk but can't repair it, you'll need something stronger like DiskWarrior. DW's strength is in recovering and rebuilding directories, the cause of most drive problems.
AJ

IMac can't see my external hard drive

I plug in a Toshiba 500 Gb External Hard drive and it doesn't show up on the desktop, in the finder window or in Disk Utility. It shows up in all those places on my work iMac and my son's laptop. Any ideas why my computer doesn't recognize it? Thanks for any help.

donna226 wrote:
It connects with a USB 3.0 cable but states that it is compatible with 2.0 as well.
USB3 is downward compatible with USB2.
Flash drives show up when plugged into the USB ports of which there are four. The power indicator light on the drive is on and I can feel the drive spinning.Tried doing a smc reset and it didn't help.
As an experiment disconnect all those other usb connections.

I can not see my external hard drive

Similar Messages

Maybe you are looking for