I can not see my external hd on my mini when i plug it in. how do I fix this problem?

i have a mini and i was using a segate 1tb external hd to move old files that were on my old dell to the mini. i always viewed it contense by going to the mini hd and at the bottom there was an icon that i could click to open the drive. it is gone now.

Finder > Preferences > General

Similar Messages

I have CS 6 installed on a Win 7 OS machine. I can not connect to the internet to get updates from within the program. How do I fix this?

I have CS 6 installed on a Win 7 OS machine. I can not connect to the internet to get updates from within the program. How do I fix this?

IP routing doesn't work the way many folks might initially think it does; functional IP routing requires manual configuration and the establishment of static routes and default routes specific to the local network configurations, and it's very easy to get it wrong, or to get the default route swapped. Multiple NIC boxes don't magically work, either. (Been there, done that, wondered what happened to my network when the paths got reordered or my route settings were messed up, etc.)
Routing configuration errors can be quite subtle, too. (Again, voice of experience. Ever had a thousand-seat office LAN accidentally routing through your desktop? As the, um, unnamed guilty party discovered, getting into that configuration was subtle. Seeing the performance crater on the fellow's box and on the LAN was obvious.)
Knowing how IP routing works is a prerequisite to getting this configuration to work; there's manual configuration required. Clearly something has gone weird here.
What to do? Read up on IP routing. I'll again suggest the threads and the manual mentioned earlier.
And in general, I prefer to avoid using my comparatively expensive Mac boxes as sub-optimal IP routers or as firewall boxes. General-purpose operating systems and generic x86 boxes are going to be inherently poor IP routers. Dedicated routers (or embedded or surplus x86 boxes with routing software loaded) offload the Mac boxes here, and are also typically easier to configure manage. And "real" IP routers can have hardware specific to efficiently routing packets. Use of an outboard firewall or firewall-router box also greatly simplifies gateway routing, too; it's a configuration that many folks and many businesses tend to use.

TS1398 wifi networks are not shown and can not use wifi in my iPhone 4s since upgrading to iOS 7, any help available to fix this problem

My iphone 4s is not showing the wifi networks after upgrading to ios 7, can not use wifi anymore....any guidance to fix the problem?

You can't downgrade the iOS level.
Try using Settings > General > Reset > Reset Network Settings.

I have an ipod touch 4 version ios 6.1.6 and I do not see outlook as an email choice to add on my ipod. How do I fix this?

When I go to add my outlook email it is not listed as a choice so I click add new account and then once I enter my information, It says incorrect and I used the information settings off of here. I am using ios6

iPhone, iPad, or iPod Touch
Tap Settings, and then tap Mail, Contacts, Calendar.
Tap Add Account in the Accounts page.
Select Outlook.com.
Note: If your device is using an IOS version that is older than 7.0, you will not see the option for Outlook.com. Instead, selectHotmail as your account, and enter your Outlook.com address and password.
Select the fields that you want to sync. Tap Save.
From:
http://windows.microsoft.com/en-us/windows/outlook/to-go

When i updated the new itunes all my music does not play all the way. some of the song is missing. how do i fix this problem

when i sync my music to my iphone all my music only plays half the song and says silent until the next song. how do i fix this problem

Does the music play properly in iTunes? You may need to backup and then immediately restore the device.
tt2

HT201210 After downloading latest version of iTunes it will not open. This error message is displayed; The program can't star because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. Then a second error box

After iTunes requested that I download latest version on PC it now will not open. 2 error messages appear. first: The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. second: iTunes was not installed correctly please reinstall iTunes. Error 7 (Windows error 126). I have tried reinstalling a number of times and restarting computer but no luck.

This happened to me today as well post installing the latest version of itunes. I did a search on google for the error and came across a recommendation to :
Note: Start Windows in Safe Mode to complete any of the following steps if you're unable to access Windows normally due to the msvcr80.dll error.
If, and only if, you're receiving the msvcr80.dll is missing error when you open Apple iTunes, do the following: (skip this step if your msvcr80.dll error is occurring with a different program)
Uninstall from Windows the following five programs in this order: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, and finally Apple Application Support. If you have iCloud, remove it as well.
Uninstalling these programs in Windows is done from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
Note: Songs and playlists in iTunes will not be removed when you uninstall the iTunes program or any of the other, already-mentioned Apple programs. If you'd still like to back them up, they're usually located in the My Music folder in Windows.
Download the latest version of iTunes from Appleand note the location you're saving it to so you can find it once it's done.
Run the iTunes installation as an administrator. If you're not sure how to do that, see How Do I Open an Elevated Command Prompt? for help. That procedure shows you how to open the Command Prompt program as an administrator, but the steps are essentially the same for anything, including the iTunes installation package you just downloaded.
A general overview of removing and reinstalling iTunes can also be found here on Apple's site but the above procedure seems to work better in this particular situation.

I go to my settings and i change something and then i hit the home button and it wont let me go home. So i then try to turn my screen of and turn it back on to see if that will help. It will not shut off either. How do i fix this problem?

I have a problem! I go to my settings to change something and then i hit the home button to go home and it will not let me. So I hit the button on the top to turn it off to see if i can make it anybetter. My screen will not turn off! I tried to shut it off and it wont let me do that either. So now i am stuck in my iPod settings until my iPod dies. How do i fix this problem?

A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 15-20 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure.

HT4534 i installed facetime for my mac and now when i make a call it goes through i can see and hear them perfectly but they cannot, i am "frozen" so how do i fix this?

i installed facetime for my mac and now when i make a call it goes through i can see and hear them perfectly but they cannot, i am "frozen" so how do i fix this?

When I try to make a call it will go through and I can hear the other person but they cannot hear me, is there a setting that disables the speaker when using the headphones to try to make a call, also speakerphone automatically goes on when I start a call which I do not like, any suggestions how to fix this?
I also have this problem...........

I was told to update iTunes. The update failed. Now I can't open iTunes but get the following messages: The program can't start because MSVCR80.dll is missing from your computer. Try reinstating the program to fix this problem. Then I get iTunes was not

I was told to update iTunes. I did and it failed. Then every time I tried to open iTunes I get the following message: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem." Then I get the following: "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (windows error 126)." I have uninstalled and installed iTunes a couple of times with no luck. I cannot even access iTunes support

Troubleshooting issues with iTunes for Windows updates - MSVCR80

HT4061 my memory is low on my ipad and i can not stay connected to the internet. How do I fix this problem

My ipad will not stay connected to the internet. the message in the settings says low memory. How do I fix this problem?

Go to Settings > General > Usage and you will see the memory consumers. Remove some of the big stuff.

All of a sudden my iTunes stopped working, and I get the following error messages: 1. the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem and 2. iTunes was not installed correct

All of a sudden my iTunes stopped working, and I get the following error messages:
1. the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem
and
2. iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126).
Now I've checked the forums and followed the advice of uninstalling all Apple applications, rebooting, and reinstalling iTunes.
This is not working. I've tried installing as Administrator but doesn't make any difference at all.
There must be a way to fix this? I'm not a tech geek but I want to avoid having to take my laptop back to factory settings to sort this out.
Thanks

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99192)

On a MAC G4, WITH OS 10.5.8, I DOWNLOADED 3.6.8, BUT I CANNOT INSTALL IT. IT SAYS I DO NOT HAVE SUFFICENT PRIVILEGES. WELL, IT'S MY COMPUTER AND I AM THE ADMINISTRATOR ON IT. HOW DO I FIX THIS PROBLEM SO I CAN INSTALL FIREFOX 3.6.8??

On a MAC G4, WITH OS 10.5.8, I DOWNLOADED 3.6.8, BUT I CANNOT INSTALL IT. IT SAYS I DO NOT HAVE SUFFICENT PRIVILEGES. WELL, IT'S MY COMPUTER AND I AM THE ADMINISTRATOR ON IT. HOW DO I FIX THIS PROBLEM SO I CAN INSTALL FIREFOX 3.6.8??
== I DOWNLOADED UPDATE 3.6.8

Snow Leopard = OS X 10.6.x
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Other countries...
http://support.apple.com/kb/HE57
After the Successful Install, run Software Update to get the latest updates for Snow Leopard.
Be sure to make a Backup of your Current System Before Upgrading...

HT1688 I can not restore and upgrade my Iphone 4. When i plug in to computer itune's restore and check for update buttons are not active.

I can not restore and upgrade my Iphone 4. When i plug in to computer itune's restore and check for update buttons are not active. What is that mean?

Razmee,
Guess what? After posting, I read another thread on this topic where someone said they went to an Apple store and the tech person there added the optional username and password in the Outgoing Mail Server boxes, and then reset the phone again. Although I had tried resetting and restarting a few times today, I had NOT reset it after entering the username and password into the optional fields.
When I entered my username and password into the optional fields, the iPhone entered checks (ticks) to the right of every entry; it had not done this earlier. (I didn't reset at this time, and the outgoing mail would still not transmit).
So just now, I reset it and the outgoing email was sent!
Thanks to you and this forum, it's a great ending to a few frustrating days.
I hope this message helps others. Not only does everything have to be entered correctly in the respective boxes; but once everything is entered and you press the "Done" button, every box should then have a check mark next to it and then you must reset the phone.

HT1600 Since the latest up-date I can't see any movies. I always returns to the main menu. Is anyone else having this problem and how do I fix it?

Since the latest up-date I can't see any movies. It always returns to the main menu. Is anyone else having this problem and how do I fix it? We have gone 3 days without the use of renting movies.

Welcome to the Apple Community.
First you should try logging out of your iTunes Store account (settings > iTunes Store > accounts) and then back in again.
If that doesn't help, try resetting the Apple TV (Settings > General > Reset > Reset all settings). You should also try restarting your router.
If both of the above don't help, you should try a restore (Settings > General > Reset > Restore).

My ipod recently cracked and now the right side of the touchscreen is not working. I can't even unlock the touch screen. How do I fix this problem if it even can be fixed?

My ipod recently cracked and now the right side of the touchscreen is not working. I can't even unlock the touch screen. How do I fix this problem if it even can be fixed?

You can pay to have it repaired.

I can not see my external hd on my mini when i plug it in. how do I fix this problem?

Similar Messages

Maybe you are looking for