I can not see my i phone/device on my i tunes?
I can not see my i ohone/device on my I tunes aftre i upgraded to the new verision
all I want to do is add a playlist to my i phone.
Hello Andrej,
Devices that use the NI-DAQmx Base driver will not appear with Measurement & Automation Explorer (MAX). Instead, you should use the NI-DAQmx Base Configuration Utility found within LabVIEW under Tools > NI-DAQmx Base Configuration Utility.
Follow the instructions in the following Knowledgebase for loading the correct task list for use with the DAQmx Base shipping examples:
KB 3RRF2088: NI-DAQmx Base Task Configuration Utility Does Not Show PDA DAQ Device
Also, with the new DAQmx Base 2.1, you can now use the CF-6004 Compact Flash Device with the LabVIEW 8.20 PDA Module to target Windows Mobile 5.0 devices.
I hope this helps,
Travis G.
Applicaitons Engineering
National Instruments
www.ni.com/support
Similar Messages
-
I am using windows 8. I have downloaded i tunes. but i can not find my i phone any where in i tunes menu. so I am having problem in syncing my phone. please guide me
If the device doesn't appear as shown in the following instructions: http://support.apple.com/kb/HT1386
then the following may help: http://support.apple.com/kb/TS1538 -
I can not see my CF-6004 device in MAX
Hi,
I have HP IPAQ PocketPC with Windows Mobile 2005, CF-6004
device, PDA 8.0.1 module and I installed DAQmx Base 2.0 on PocketPC. I followed instructions in documentation I get with DAQmx Base 2.0 and PocketPC is correctly conncted to PC.
But I can not see CF-6004 in MAX?!?
I found out somewhere that DAQmx Base support CF-6004 on Pocket PC 2003 OS but I did not found that information for Windows Mobile 2005 OS!
Thanks for help!
AndrejHello Andrej,
Devices that use the NI-DAQmx Base driver will not appear with Measurement & Automation Explorer (MAX). Instead, you should use the NI-DAQmx Base Configuration Utility found within LabVIEW under Tools > NI-DAQmx Base Configuration Utility.
Follow the instructions in the following Knowledgebase for loading the correct task list for use with the DAQmx Base shipping examples:
KB 3RRF2088: NI-DAQmx Base Task Configuration Utility Does Not Show PDA DAQ Device
Also, with the new DAQmx Base 2.1, you can now use the CF-6004 Compact Flash Device with the LabVIEW 8.20 PDA Module to target Windows Mobile 5.0 devices.
I hope this helps,
Travis G.
Applicaitons Engineering
National Instruments
www.ni.com/support -
I am trying to transfer pictures and music from my phone to my computer, and when I connect my phone, it says Device not installed correctly. I can not see my files or nothing. What can I do?
Try downloading these http://www.samsung.com/us/support/owners/product/SCH-I535MBBVZW
or searching for it here Verizon Wireless Cell Phones - Verizon Wireless Accessories | Samsung -
Can not see the device net Master Interface in my project.
Can not see the device net Master Interface in my existing project. Need to Modify exististing code. Can not recomiple and create exe file after making changes. Error says the vi's are broken. Tried re-installing industrial communications for device net but get an error saying a newer version is already installed. Do I need to plug my computer into the device net scanner to fix this?
Assume the installation disk is an OS X disk? If it's the original one that came with the system (grey-colored disk versus black retail disk) have you tried to hold the alt key down when you boot? This would allow you to choose the Apple hardware test. If you can do this, choose the Apple hardware test, click the arrow to the right, and when prompted choose the extended test. Does that give you any errors or messages about a hardware problem?
Are you able to hold the C key down when you reboot, to boot off the installation disk? -
I have rented a movie on apple tv and wish to finish it on my mac book air. When I open iTunes on my mac book air I can not see the movie in iTunes. It is an authorised device and I can see other purchases just. How do I fix it?
Rented movies downloaded to an Apple TV can't be transferred to any other device.
(86941) -
I have the newest version of the iPad and can not see it under devices in my iTunes account on my PC. I can however see my iPod touch under devices and sync it. How can I get my iPad to show under devices and sync as well? I have also tried may suggestions on the apple support site and none have worked. Any suggestions are welcome.
You need iTunes version 11+.
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
Cheers, Tom -
I just bought a Iphone 5 -- my Iphone 4 and my ipad used to automatically sinc calendars via the Icloud whenever I entered anything on either device -- I can not get the new phone to do this.I have check the settings on both devices and they seem to be t
There are only two things that you must do to connect a device to calendars:
1) In settings>icloud, you must log in, WITH THE CORRECT ID/PASSWORD, and
2) Turn on calendars on the same page.
You said that the iphone 4 and ipad **used** to automatically sync. Do they no long sync? -
I have set up my apple ID, my apple TV is connected to my Mac, internet is OK, TV syncing all movies, phones,… ok, but I can not see iTunes store on my apple TV. Any suggestions? Thanks
Thanks, I read several other threads and all it took was to turn off the router and turn it back on again, 'simples'.
Thanks
Chris -
I phone 5s with 7.0.4 software I can not see the caller ID while on the phone for call waiting. Any help???
The following may help: http://support.apple.com/kb/TS4268
-
TS1741 I can not see my Apple TV in my device option in remote
I can not see my Apple TV in my device option in remote
Read the article from which the thread was started and follow the troubleshooting steps provided.
-
HT1386 i can not see my iphone as a device in itunes
i can not see my iphone as a device in itunes so can not sync it, please help
See Here > Device Not Recognised > http://support.apple.com/kb/TS1538
-
I dropped my phone in the water can not enter pass word couse can not see the screen> what can i do?
You're going to need a new phone unless you are very lucky. Take it to an Apple Store.
-
Tryed to update my iphone4s, the update fail, now itunes can not see my phone
tried to update my iphone4s, the update fail, now iTunes can not see my phone
Hi kjpservices,
So it sounds as if your iPhone does not appear in iTune after a failed update to iOS, is that right? In order to get it back into iTunes you will want to use one of these articles, depending on what kind of computer you have -
For a Windows PC, use this -
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If you are using a Mac, use this -
iOS: Device not recognized in iTunes for OS X
http://support.apple.com/kb/TS1591
Once you get ths iPhone back into iTunes, try the update again. If it fails, post back and we can continue troubleshooting from there.
Thanks for using Apple Support Communities.
Best,
Brett L -
Why can i not see voicemail on phone?
can not see voicemail on screen/
When I miss a call it doesn't show that I have a voicemail and when I try and hear voicemails it is empty. Also it is not my voice of the message.
Maybe you are looking for
-
Issue in using Cursor+Dynamic SQL+ Bulk collect +FORALL
Hi, I have a dynamic query which I need to use as a cursor to fetch records that inturn need to be inserted into a staging table. The issue I am facing is I am not sure how to declare the variable to fetch the records into. Since I am using a dynamic
-
Hi Folks, I use an Intel Imac 20" with the ATI x1600 128meg ram graphics card in. I would like to buy another 20" screen to work from (2 screen setup) in aperture i have a few questions: Will my Mac run ok with 2 screens or will the load of aperture
-
How to Migrate SSIS packages from 32 bit to 64 bit environment
Hi, We developed many SSIS packages in 32 bit environment using SQL 2008 on windows 2003 server 32 bit OS. In order to utilize the 64 bit features we wish to migrate these packages into a 64 bit. Wanted to know. 1. Whether we can execute these packag
-
Problem with CUSTOMER_REL
Hi, We are executing the initial download in CRM 4.0 system. When we proceed to download the relationships, BDOCs shows an strange error (althought the relationships are correctly created). The error is <b>Service that caused the error: BP_REL_CRM_TO
-
Unable to run OpenScript Functional Scripts from OTM
Hi, I am unable to run OpenScript Functional Scripts from OTM, but the same script is running successfully on OpenScript. I have a script which has all my functions (say Script A) and I am calling these functions from a different script (Script B) an