I can not see the full toolbar

Hi there, for some reason, when i go to VIEW - TOOLBAR i only have two options that are available for me which are Document and Standard, however, in older versions i used to have a full Tool bar with quick actions to create many things which was available for me at all times, where did it go?

Open your Insert window from the Window menu.
Click and drag the name tab of the Insert window to the top of the application screen until it highlights
Drop the tab to turn the Insert window into a toolbar.
Is that the one you were missing?

Similar Messages

  • HT4009 I purchased an upgrade inside the free app, however it shows I paid for the free app & now I can not download the full version.  What should I do?

    I purchased an upgrade inside the free app, however it shows I paid for the free app & now I can not download the full version.  What should I do?
    Thanks!
    Kristine

    Finish the download on your computer in iTunes and then sync the app to the iPad and then delete it. You will probably have to let it fully download before you can delete it.
    You can try restarting the iPad and see if the download will resume - Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Yoy can try  this as well and see if the download will resume. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Look in iTunes and see if there is a pending download in there that might be causing the delay. If there is a download there, try to finish that one first.

  • WHY DO I HAVE TO CLICK ON " GROUP YOUR TABS" IN ORDER TO SEE HOW MANEY TABS ARE THERE? WHY CAN NOT SEE THE TABS?

    help...........
    it happen, because i wanted to customize my fire fox and drag the tabs over navigation tool bar.. now i can not see the tabs unless i click on group your tabs button :( and can not change it any more

    By PM
    ''hi John, i can not see, how many sites are open, because i do not see the tabs! i am sorry but i do not know how to explain it:( I see a window with my bookmarks -toolbar, menu bar and navigation bar, but no tabs for the sites, i am on! thank you for taking time and answering! ''
    What happens when you open a new tab for instance use Keyboard shortcut Ctrl +T does that open a new tab that you can see. Please attach a screenshot of your ordinary Firefox page e.g. open on this forum. And a screenshot of the Group Your tabs view.
    * [[How do I create a screenshot of my problem?]]
    * [[How to make screenshots]]
    I could suggest trying the Firefox reset, but that may be rather premature
    * [[Reset Firefox – easily fix most problems]]

  • Can't see the full page of comic life

    I can't see the full page of comic life and a lot of apps I have a half-inch of blank screen at the bottom and the top not being used

    Click on the full screen arrows at the top right corner.

  • I can't see the positioning toolbar in robohelp!

    I can't see the positioning toolbar eventhough i have it
    clicked on, with a tick next to it, under the toolbar menu. I have
    browsed this forum before and done a number of things that have
    been suggested to try and solve this issue, these include:
    - opening a new topic to see if its there
    - creating a new topic and checking if its there
    - maximising and minimising robohelp to saee if its lurking
    anywhere there
    - reducing my windows toolbar
    - changing the registry - specifically the Toolbarvisible
    property
    However none of them have worked! One thing that i have also
    noticed is that i am not able to send a positioned text box to the
    back of a robohelp topic, i think this must be linked to the
    toolbar issue given that this function can be found on the
    positioning toolbar (according to the robohelp manual).
    Oh and for the record i am in version X5 and generating
    webhelp.

    Duplicate post - Please reply to original at
    this
    link

  • I am trying adobe Photoshop and adobe illustrator because I can't decide which one to buy so I want to try both, after I downloaded Photoshop I can not see the option "free trial" for adobe Illustrator, it is because I can only free try one at the time??

    I am trying adobe Photoshop and adobe illustrator because I can't decide which one to buy so I want to try both, after I downloaded Photoshop I can not see the option "free trial" for adobe Illustrator, it is because I can only free try one at the time??

    Bryan,
    You can download both at the same time.
    But you may wish to start off with one and use it full time, then download the other later, so you get the maximum possible time with both.
    If you have trouble getting the free trial on the Adobe site, you may try here or here:
    http://prodesigntools.com/tag/ddl
    http://technolux.blogspot.co.nz/2011/02/adobe-direct-download-links-less-akamai.html#more

  • Goo night, I have Nikon D810, and i can not see the raw photos on lightroom and Ps, could someone help me?

    Good night, I have Nikon D810, and i can not see the raw photos on lightroom and Ps, could someone help me?

    Good morning,
    Thanks for your message, the versions are LR 5 and PS6
    2015-02-24 21:31 GMT+00:00 John Waller <[email protected]>:
        Goo night, I have Nikon D810, and i can not see the raw photos on
    lightroom and Ps, could someone help me?  created by John Waller
    <https://forums.adobe.com/people/John+Waller> in Photoshop Lightroom - View
    the full discussion <https://forums.adobe.com/message/7226636#7226636>

  • When I open up firefox, I can only see the top toolbar. No window/webpage appears. WHat is wrong?

    When I open firefox, I can only see the top toolbar, including the tabs. The webpage and window below are gone. All I see is the top toolbar, tabs and my background... HELP!

    Did you also try to delete the localstore.rdf file in the profile folder?
    *http://kb.mozillazine.org/localstore.rdf
    Try to reinstall Firefox.
    Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
    *Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html
    *Trash the current Firefox application to do a clean (re-)install
    *Install the new version that you have downloaded
    Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    *https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Can not see the data in the grid

    Hi,
    nice to see the new features, but I can not see the the table inserts
    in the data grid - the <data> rider is not clickable.
    Regards

    Hi annerose,
    This problem has appeared in a few other threads. It's caused by installing Release 2 Raptor over Release 1 Raptor without first deinstalling Release 1 Raptor . So what you need to do is:
    1) Back up any important Raptor files, e.g. connections etc.
    2) Remove the existing Raptor Rel 1 installation folder
    3) Install Raptor Rel 2
    Hope this helps
    ady

  • I bought an I pad 2 from us but I can not activate the Facetime in UAE(Dubai)as I can not see the country in the I pad's  drop list, anyone has an idea as how to resolve this issue

    I bought an I pad 2 from us but I can not activate the Facetime in UAE(Dubai)as I can not see the country in the I pad's  drop list, anyone has an idea as to how to resolve this issue

    I'm not that familiar with how FaceTime works. I know how to set It up but I don't use it. I just know that you can't activate in the UAE. I believe that you can activate in any country that permits it's use. Whether you will need a new ID or not, I can't confirm.
    You can Google this and get all sorts of articles on workarounds. Apparently if you set up a VPN you can use it in the UAE. Here is one article that I found.
    http://talkfree7.blogspot.com/2010/09/how-to-facetime-voip-call-from-uae.html
    I Googled "workaround for FaceTime in UAE" to find this.

  • I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

    I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

    Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

  • HT3625 i can not see the line in/built in input on the menu?do you know why?

    i can not see the line in/built in input on the menu?does anyone know why?
    i am trying to broadcast a live dj mixing but with the set up, i cant find the lin in input not even on the menue.
    any clues will be appreciated.

    see shots from '11 to '12 going forward.

  • Can not see the report in report manager/admin tab

    Hi,
    in 8.49 on Win 2003 some users can not see the reports in report manager/admin tab. PS user can see them.
    Should we add some grants in user profile ? Which ? Any query to compare that user profile with PS ?
    Thank you.

    On the administration page, you will be able to see "View Reports For" header on the top.
    Under that header you will see the following fields:
    User ID/Type/Last/Status/Folder /Instance
    Above values will be used by PeopleSoft to filter and display the list of reports
    If the user has selected Status as Processing and saved the page, PeopleSoft will only show reports which are in Processing status.
    If user runs a report and it has been posted, it will not show up in report manager coz the filter value is set to Processing.
    Hope this helps. I dont think Permissions has anything to do with this since user is able to view the page.

  • Final user's can not see the data due to limited authorization.

    We have created a InfoSet with three info Objects, 0Account, 0Costcenter and 0COMP_CODE. 0Costcenter have an attribute retail location  0RT_LOCATIO.
    0RT_LOCATIO is an authorization relevant object. We as consultants can execute the infoset properly, but final user's with limited authorizations can not see the data because of authorization failier
    We hae several options to solve the issue, deleselect the auth. flag in the infoobject; delete the infoobject from the attributes of the cost center or create an authorization object and assign it to the final user's profile. But we don't want to go that way.
    My question is, is there any way to avoid including this attribute in the infoset definition? We are not using it in the query and we don't need it, so if we could delete it from the infoset (in the same way you add or delete infoobjects from an Infocube) without changing the cost center aster data, we will have our problem solved.
    Does anyone how to do this (if possible)?
    Thanks in advance!

    Just do two things to find the authorization check failed for that user.
    1. Execute SU53 output and find out the authoirzation check failed. If yes, please send that to BASIS Team.
    2. Next one, switch on the authorization trace in ST01 and ask that user to see that data. if the user is failed with authorization issue. switch off the trace in ST01 and find out the issue.
    Do this way, if it is not successful you can go for any other alternate way.
    Hope this would help you.

  • Can not see the menu of New Business Components Package in jdeveloper

    I am just follow the developer guide.
    and when I create the Business Components Package, the guide said that
    ========================================
    In the JDeveloper Navigator, select the OA Project where you want to create your package.
    From the main menu, choose File > New to open the New Object Gallery.
    In the Categories tree, expand the Business Tier node, and select Business Components (BC4J).
    In the Items list, select Business Components Package to open the Business Components Package Wizard. You can also right-click on the OA Project and select New Business Components Package to navigate directly to the Business Components Package Wizard.
    =====================================
    In fact I can not see the menu about Business Components (BC4J) in the File/new/buisness tier/Business Components (BC4J).
    I can only see the File/new/buisness tier/ADF Business Components.
    And can not find the "Business Components Package" under ADF Business Components either.
    I am using the JDev Extension for OA (p5856648_R12_GENERIC.zip) and EBS 12.0.0.
    And I create an OA Workspace and OA Project.
    can anyone help?

    James,
    Use search facility on forum. Chk thread Re: OAF Toolbox Tutorial Help - Search
    --Shiv                                                                                                                                                                                                                                                                       

Maybe you are looking for