I can not sighn in. I get the message A network error has occurred while attempting to sign in.

Hi rebjrbaker,
I'm guessing that you're trying to log in to the service from within Reader. If that's the case, you may need to update the version of Reader you're using. Choose Help > Check for Updates. You should be using version 11.0.9 (this update was just released on Tuesday, 9/16).
Best,
Sara

Similar Messages

I keep getting the message "An unknown error has occurred" when trying to sign in to the App Store. Why?

I keep getting the message "An unknown error has occurred" when trying to sign in to the App Store. How do I solve this problem?

Make sure you have the correct country selected. Click the round flag icon bottom right side of the App Store window.

I keep getting the message an unknown error has occured 0x80090318. I don't know how to fix it. I even deleted itunes off my computer and reinstalled and still get the error message

I keep getting the message an unknown error has occured 0x80090318. I don't know how to fix it. I even deleted itunes off my computer and reinstalled and still get the error message

This helped me.
Go to Start -- Accessories -- Command Prompt, make right click and choose run as administrator
Type this command : netsh winsock reset
then restart your computer, everything should be ok after this. Good Luck.

Cannot access Adobe Folio Builder using Indesign (CS6) on Windows 7, error message is 'An error has occured while trying to sign in to the Folio Builder Panel' [IMS_ERROR_FAILURE]

Cannot access Adobe Folio Builder using Indesign (CS6) on Windows 7, error message is 'An error has occured while trying to sign in to the Folio Builder Panel' [IMS_ERROR_FAILURE]

Yes, I can open the DPS portal via the Folio Builder panel within InDesign. Although I have created Folios locally within InDesign CS6, the DPS portal is empty and everthing greyed out with just the text "There are no folios to display. Create folios with the folio builder in InDesign".
If I try to sign in within the Folio Builder panel in InDesign, I get the error message [IMS_ERROR_FAILURE] . In addition I am also not able to access the "Help" menu from within InDesign although I am connected to the internet.
To complicate it even further, I am working in the UK whereas all internet control (firewall) and licences are handeled by head office in Germany. I am not sure if this is a firwewall issue or not but if the IT department in Germany could get support from Adobe to understand the access requirements, this may help.
Hopefully using the forum someone out there will know the answer.

Hi, be greatful for some help! Trying to change appleid in my app store. Whenever i try and manually add, i get the message, an unknown error has occured. Appreciate any tips!

Problem solved!

Since the question - actually not a question but merely a useless post - is almost one year old, the chances of the OP still getting email notifications for this "issues" are probably non existent and you are most likely not going to hear back from him.
Sign out of your ID, restart the iPad and then try signing in again and see if that works. And since I have no clue what iOS your are running, this will be somewhat generic.
Settings>Store>Tap your ID. Sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. To back to Settings>Store>Apple ID - sign in again.

Every time i try to sign in to the mac app store i get the message 'an unknown error has occurred"

I can sign into the iTunes store but not into the Mac App Store. I don't have this problem on my other Mac running the same Mac OS X 10.6.8.

Try deleting the cache associated wi the App Store.
Quit the App Store if it's open.
Now open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy/paste: ~/Library/Caches/com.apple.appstore
Click Go then move the Cache.db file from the com.apple.Safari folder to the Trash.
Try the App Store.

While downloading OS X Update Combined 10.8.5 i get a message saying "an error has occurred while downloading the updates. (102)

I am first time mac user but quiet tech savi can some one help me fix this error

Welcome to Apple Support Communities
Install the 10.8.5 Combo from the Apple site > http://support.apple.com/kb/DL1676

TS3297 Any idea why I can't purchase stuff off either iTunes or AppStore? I am getting a message saying unknown error has occurred immediately I enter my password.

Any idea why I can't purchase stuff off either iTunes or AppStore? I am getting a message saying unknown error has occurred immediately I enter my password.

Brett,
Well done getting the wireless network secured.
You have to precede the (hex) password with a '$' in Mac OS, to tell the Internet Connect dialog box that you are keying a hex password (rather than ASCII). This is because the Mac has detected that the network is WEP protected, and leaves it to you to decide how you want to key the password.
As an alternative, in Internet Connect (or from the AirPort icon menu), you can elect to join an "Other" network. If you select your network again, it'll come up with "WEP Password" as the option of Wireless Security. You can change this to "WEP 40/128-bit hex" and then not have to precede your password with the '$'.
Alternatively, you could tell us the make and model of your wireless router and we can tell you how to set, and use an ASCII password. From your 10-character hex password, we can see that you're using 40/64-bit WEP. Non-Apple routers can be a bit fussy when using ASCII passwords with 40-bit WEP (don't worry, this is also true for Windows PC's using 40-bit WEP too), but we can talk you through it.
As a final alternative, as you have such a whizzy Mac, as long as your wireless router supports it, you could use WPA security, and never have to worry about ASCII / hex / '$', etc. Older Macs (particularly original AirPort cards - not AirPort Extreme - and OS9) were limited to 40-bit WEP.

I'm unable to update my apps or download new apps to my Iphone. When I try I get a message "An unknown error has occurred". It was happening before and after the last OS upgrade. I've done a hard reboot with no effect. Any suggestions???

I'm unable to update my apps or download new apps to my Iphone. When I try I get a message "An unknown error has occurred". It was happening before and after the last OS upgrade. I've done a hard reboot with no effect. Any suggestions???

Have either of you had any luck with this issue. It began happening to me today when I was trying to purchase music on iTunes. I have purchased music and games in the past and have had no problem. Any help would be appreciated.

An error has occurred while attempting to load the Crystal Reports runtime in deployed applications

My reports use to work but now i'm getting the following error on all reports in all the applications on my server
An error has occurred while attempting to load the Crystal Reports runtime.
Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.

Hi Willingtolearnja,
This forum is for TFS, I'd like to know whether you use TFS and your question is related to TFS. It would be better to let us know more details about your scenario if it's related to TFS. If not, you might need to open a new thread in the proper tech forum
that your project related for a better response.
However, from the error message, you might use the wrong configuration for x86/x64 mode. Please change the configuartion and try again. Check the links below for more information:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/82e23647-7116-424b-b437-df0cb2be083d/an-error-has-occurred-while-attempting-to-load-the-crystal-reports-runtime?forum=vscrystalreports
http://stackoverflow.com/questions/19286630/an-error-has-occured-while-attempting-to-load-the-crystal-reports-runtime
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

An error has occurred while attempting to load the CR in hosting

I deployed my asp.net with crystal report in hosting server...
They have installed Crystal Report Basic Runtime for Visual Studio 2008.(10.5.3700.0) on windows server 2008 OS X64..
I developed my asp.net application with visual studio 2008 in xp machione x86 now on deploying this im getting the following error on hosting server, in my local server it works fine..
The error:-
An error has occurred while attempting to load the Crystal Reports runtime.
Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.
They have installed 10.5.3700.0 runtime on server still why this error...?

You probably installed the 32 bit runtime (x86) but are running the application in 64 bit mode. I think you are using a web app, so you need to do one of two things, install the x64 version of the runtime or switch the application pool for your website to run in 32 bit mode.

An error has occurred while attempting to load the Crystal Reports runtime.

Server Error in '/' Application. An error has occurred while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly. Please install
Crystal Report is not working on webServer but It is working on local Saver
on Server i m getting this error
Message was edited by: Ludek Uher

If you have your AppPool set for 32 bit then install the 32 bit runtime, if it's set for 64 bit then install the 64 bit runtime.
Try searching, lots of posts on this subject.
Don

I keep getting this message An unknown error (-15006) occurred while connecting to the AirPlay device " AirPort Express".

Please help. I have been having major difficulties with my Airport Express. It used to work fine but for the last year or so it continually disconnects, skips and ultimately drops out and itunes gives me this message "An unknown error (-15006) occurred while connecting to the AirPlay device “AirPort Express”. I keep resetting, unplugging, restarting Itunes, or my computer. It works for a couple of hours and then I get the message again. It's making me nuts and was a bummer at last week's party when we had no music, yet again. I have looked up the support discussions, but there is no answer as to how I can fix it. I am currently using Mt Lion OS. Does this have anything to do with it? Checked for software updates, but nada.
Any suggestions.

It may be possible the where you have the AX located may just be in a spot where it does not get a good signal even it is only 8 feet away.
I suggest that you download and install iStumbler. You will use it to determine the signal quality by making Signal-to-Noise Ratio (SNR) measurements. This will be easiest if your Mac is a laptop ... or you can borrow one. When taking the measurements, you only want your "main" AirPort running as this is what we want to measure at the location of the AX.
SNR (in dB) = Signal (in dBm) - Noise (in dBm)
You can easily find the Signal and Noise value using System Profiler on your Mac laptop.
ref: Click on the Apple icon on the menu bar > About This Mac > More Info... > Contents > Network > AirPort > Interfaces > en1 > Current Network Information > Find your wireless network > Signal / Noise
While your still in the System Profiler, note the value for Transmit Rate.
These values should be negative numbers. For example, mine currently read: -67 dBm / -95 dBm, with a transmit rate of 27 (Mbps). Plugging in these numbers yield: SNR = -67 - (-95) = 28. My Mac Mini is about four rooms away from my AEBS with about five walls between them. As you can see, the signal is still quite useable ... but the bandwidth is minimal, especially for streaming.
SNR Guideline
40dB+ SNR = Excellent signal
25dB to 40dB SNR = Very good signal
15dB to 25dB SNR = Low signal
10dB to 15dB SNR = Very low signal
5dB to 10dB SNR = No signal
Please post back your results.

I got "Invalid link" when I to reset my security questions from rescue email. Moreover when I log in into my Apple ID and click on Passwords and Security I'm thrown out with the message "An unknown error has occurred".

Here is my problem:
Need to change my email with the one that currently I'm using for rescue
Planed to change first the rescue email with a new one.
But:
I Forgot the security questions
Followed the reset security questions instructions.
Got the email on the rescue address but The link I've got on my rescue email to reset my security questions is invalid. By now the 3 hour window for the validity of the link is gone.
If I go via Apple ID, I login successfully but when I select Security I'm thrown back into Manage your Apple ID screen that displays now as well this message "An unknown error has occurred"
Tried several times, the same again and again.
On top of the long hours on the forums I spent 20 minutes over the phone with the US support on international charge, eventually I hanged up while waiting too long for the 3 rd expert but got an email later on indicating to clear my browser history and try again, which didn't work. Case number 519598448. Used my laptop with IE and my iPad, same result.

This problem now appears for me too.
When using iforgot.apple.com email-verification clicking the reset link results in the "Invalid Link" error.
The error, that caused me to do this (password failing to verify against iCloud) has vanished since though.

"Event code: 3008 Event message: A configuration error has occurred" while accessing the sharepoint site.

Hello All,
Wish You Happy New Year to All in advance.
while accessing the share point site i got the error message
Server Error in '/' Application.
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: The element <forms> may only appear once in this section.
Source Error:
Line 104: 
Line 105: <forms loginUrl="/_layouts/log-in.aspx" />
Line 106: <forms loginUrl="/_layouts/log-in.aspx" />
Line 107: <forms loginUrl="/_layouts/log-in.aspx" />
Line 108: </authentication>
Source File: C:\Inetpub\wwwroot\wss\VirtualDirectories\4545\web.config    Line:
106
Version Information: Microsoft .NET Framework Version:2.0.50727.3662; ASP.NET Version:2.0.50727.3658
i have found event message in the event log
Event code: 3008
Event message: A configuration error has occurred.
Event ID: 523cefee6a0943948cf01b4e9f476fff
Event sequence: 77
Event occurrence: 76
Event detail code: 0
Exception information:
    Exception type: ConfigurationErrorsException
    Exception message: The element <forms> may only appear once in this section. (C:\Inetpub\wwwroot\wss\VirtualDirectories\4545\web.config line 106)
Request information:
    Request URL: http://beesppesxapp70:4545/_vti_bin/sitedata.asmx
    Request path: /_vti_bin/sitedata.asmx
    User host address: 172.16.20.80
    User:
    Is authenticated: False
    Authentication Type:
    Thread account name: abc\wss_setup
Thread information:
    Thread ID: 1
    Thread account name: abc\wss_setup
    Is impersonating: False
    Stack trace:    at System.Configuration.BaseConfigurationRecord.EvaluateOne(String[] keys, SectionInput input, Boolean isTrusted, FactoryRecord factoryRecord, SectionRecord sectionRecord, Object parentResult)
   at System.Configuration.BaseConfigurationRecord.Evaluate(FactoryRecord factoryRecord, SectionRecord sectionRecord, Object parentResult, Boolean getLkg, Boolean getRuntimeObject, Object& result, Object& resultRuntimeObject)
   at System.Configuration.BaseConfigurationRecord.GetSectionRecursive(String configKey, Boolean getLkg, Boolean checkPermission, Boolean getRuntimeObject, Boolean requestIsHere, Object& result, Object& resultRuntimeObject)
   at System.Configuration.BaseConfigurationRecord.GetSection(String configKey)
   at System.Web.Configuration.RuntimeConfig.GetSectionObject(String sectionName)
   at System.Web.Configuration.RuntimeConfig.GetSection(String sectionName, Type type, ResultsIndex index)
   at System.Web.Configuration.RuntimeConfig.get_Authentication()
   at System.Web.Security.FormsAuthenticationModule.Init(HttpApplication app)
   at System.Web.HttpApplication.InitModulesCommon()
   at System.Web.HttpApplication.InitInternal(HttpContext context, HttpApplicationState state, MethodInfo[] handlers)
   at System.Web.HttpApplicationFactory.GetNormalApplicationInstance(HttpContext context)
   at System.Web.HttpApplicationFactory.GetApplicationInstance(HttpContext context)
   at System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr)
kindly advise me
Thank a lot in advance

Hi,
As per the error logs it seems you have the Form element twice in your web config file. Just take one or the other one out. if you did any changes in web. config file please share and elaborate little more about the changes if you have made recently before
the error.
Krishana Kumar http://www.mosstechnet-kk.com
Please mark the replies and Proposed as answer if they help and solve your issue

I can not sighn in. I get the message A network error has occurred while attempting to sign in.

Similar Messages

Maybe you are looking for